ISMA2026 - USD2026 Conference programme
| 8:00 - 11:30 | Registration - Auditorium Pieter De Somer | |
| 9:30 - 11:30 | Conference opening session - Auditorium Pieter De Somer | |
| 9:30
|
Introduction to ISMA2026-USD2026
Prof. W. Desmet & Dr. B. Pluymers, ISMA2026 conference chairmen Prof. D. Moens, USD2026 conference chairman |
|
| 10:00
|
Keynote lecture: Dynamics & Mechatronics in Lithography
W. Symens, ASML |
|
| 10:45
|
Keynote lecture: The Dynamics of Jointed Structures: State of the Art and Perspectives for the Next Decade
M. Brake, Rice University |
|
| 11:30 - 13:25 | Lunch break - Campus Social Sciences (ALMA) | |
| 13:00 - 18:00 | Exhibition - Campus Social Sciences (ALMA) | |
| 13:25 - 18:25
|
Technical sessions - Campus Social Sciences
Plenary poster session - Campus Social Sciences |
|
| 19:00 - 22:00
|
Conference reception - University Hall (Jubileumzaal)
All ISMA2026-USD2026 attendees, exhibitors and guests are invited. The reception is sponsored by AB Inbev and Siemens Digital Industries Software |
Schedule for the technical and plenary poster sessions:
Papers are presented in technical and plenary poster sessions starting on Monday afternoon. The list below gives a general overview of the session topics, together with the abbreviations used in the session schedule which is given in the table following the list. A detailed overview of the presented papers in each session is available below the schedule.
| Keynote session
Characterisation, design and optimisation of Acoustic Materials Cincinnati: Remembrance session Condition monitoring of rotating machinery Dynamic testing: methods and instrumentation Dynamics of Rotating Machinery Fatigue Analysis, Characterization & Testing Strategies Inverse Methods - Load Identification |
KEY
AVC CAM CINCIN CMRM D DET DT JOINT RMD CIV FACTS FSI INV MM/MV MHF MOR MB NL |
Optical Methods & Computer vision for Vibration Engineering
Periodic structures and metamaterials Railway dynamics and ground vibrations Space and aviation techniques/technologies Structural dynamics: methods and case studies Structural health monitoring (Structures) Tuned Vibration Absorbers and Dampers USD - Uncertainty Identification and Quantification Vibro-acoustic modelling and prediction |
OMCV
PER RAIL SHOCK SAT SD SHM SC TPA TVD USDUIQ USDA USDM VAMOR NVH VAM WIND POS |
| Monday 7 September 2026 | |||||||||
| room 1 | room 2 | room 3 | room 4 | room 5 | room 6 | room 7 | room 8 | room 9 | Poster Area |
| NVH1 | MM/MV1 | NL1 | USDA | AVC1 | CMRM1 | Shock | OMCV1 | SHM1 | POS 1 |
| VAMOR | MM/MV2 | JOINT | USDM1 | AVC2 | CMRM2 | DT1 | OMCV2 | SHM2 | |
| Tuesday 8 September 2026 | |||||||||
| room 1 | room 2 | room 3 | room 4 | room 5 | room 6 | room 7 | room 8 | room 9 | Poster Area |
| SC1 | VAM1 | NL2 | MB | SD1 | CMRM3 | D | FSI | LW | POS 2 |
| PER1 | VAM2 | NL3 | MHF | SD2 | CMRM4 | DT2 | SDWT1 | CINCIN | |
| PER2 | VAM3 | NL4 | USDUIQ1 | CIV | CMRM5 | DET | SDWT2 | SAT1 | POS 3 |
| CAM | VAM4 | NL5 | USDUIQ2 | RAIL | CMRM6 | TPA1 | OMCV3 | SAT2 | |
| Wednesday 9 September 2026 | |||||||||
| room 1 | room 2 | room 3 | room 4 | room 5 | room 6 | room 7 | room 8 | room 9 | Poster Area |
| NVH2 | RMD1 | SC2 | USDM2 | SD3 | TVD1 | FACTS1 | INV | ||
| PER3 | SHM3 | SC3 | USDM3 | SD4 | CMRM7 | FACTS2 | RMD2 | ||
| NVH3 | RMD3 | NL6 | MOR | SD5 | TVD2 | TPA2 | SHM4 | ||
Detailed technical programme: papers per session
An overview of the presented papers per thematic session can be found below. The author in bold is the submission's presenting author and the full paper can be downloaded via the according link.
Keynote
KEY - Monday 7 Sep 2026
| 10:00 | Symens, W., 'Dynamics & Mechatronics in Lithography', ASML. |
| 10:45 | Brake, M., 'The Dynamics of Jointed Structures: State of the Art and Perspectives for the Next Decade', Rice University. |
Active Vibration Control
AVC1 - Monday 7 Sep 2026
| 13:25 | Jalšić, M., Vermeulen, H., van der Wijst, M., and Bourquard, C., 'Experimental Validation of a Concept for Robust Broadband MIMO Active Noise Control in Cooling Circuits for High-Tech Equipment', Technical University of Eindhoven. |
| 13:50 | Prade, M., Cheer, J., and Langfeldt, F., 'Comparison of Feedback Control Strategies for an Active Vibro-acoustic Metamaterial Unit Cell', University of Southampton. |
| 14:15 | Berkhoff, A., 'Active anechoic chambers with distributed control and controlled active metamaterials', Unversity of Twente. |
| 14:40 | Jiménez Sicardo, J., Melero Esteso, M., Nieto Quijorna, A. J., Morales Robredo, Á. L., Ramiro Redondo, C., and Pintado Sanjuán, P., 'Application of multiple active piezoelectric elements for vibration attenuation by means of predictive control', Universidad de Castilla-La Mancha. |
| 15:05 | Pena-Sevillano, A., Mancisidor, I., Barcena, R., Merino, R., and Munoa, J., 'Suppression of Forced Harmonic Vibrations in Machining Using a Multiple Virtual Vibration Absorber', Ideko S.Coop.. |
| 15:30 | Ungnad, S., and Sachau, D., 'Wavenumber filtering and regularisation in the application of nearfield acoustical holography as a sensor concept for active structural acoustic control', Helmut-Schmidt-University Hamburg. |
AVC2 - Monday 7 Sep 2026
| 16:20 | Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., Marafini, F., Nataletti, P., Stampone, N., and Tirabasso, A., 'Semi active vibration control based on a multichamber suspension system with Stiffness Continuous Sky‑Hook logic', Università degli Studi di Roma La Sapienza. |
| 16:45 | Austin, B., and Cheer, J., 'Piezoelectric sensing and actuation of an active tuned vibration absorber', University of Southampton. |
| 17:10 | Zeyl, A., and Platz, R., 'Calibration of a mathematical damping force model created by a Voice Coil Actuator (VCA) under the influence of mechanical and electrical system parameters used for passive and active vibration isolation of a one mass oscillator', Michigan Technological University. |
| 17:35 | Rodrigues, G. K., Janssens, S., Deckers, E., Mosquera-Sánchez, J. A., De Marqui Jr, C., and de Oliveira, L. P. R., 'On the design of a negative capacitance for vibration suppresion: an electromechanical analisys', University of Sao Paulo - São Carlos School of Engineering. |
| 18:00 | Bryan, M. J., Nielsen, O. M., and Butlin, T., 'Physics-informed machine learning models for automotive active noise control', University of Cambridge. |
Characterisation, design and optimisation of Acoustic Materials
CAM - Tuesday 8 Sep 2026
| 16:05 | Cai, Z., Henrìquez, V. C., Shen, W., and Lucklum, F., 'Numerical Study on the Effect of Microgeometric Parameters on Dynamic Stiffness and Damping in Kelvin Foam', Institute of Urban Safety and Environmental Science, Beijing Academy of Science and Technology. |
| 16:30 | Braule, T., Gallezot, M., Poudrel, A.-S., Ege, K., Chesné, S., Leclère, Q., Brajer, X., Berger, S., and Meille, S., 'Multi-Scale Vibro-Acoustic Characterization of Equivalent Mechanical Parameters in Plasterboards', INSA Lyon. |
| 16:55 | Kennedy, J., Flanagan, L., Otubela, M., and Lupoi, R., 'Applications of novel sintered metal powder laminates for noise control', Trinity College Dublin. |
| 17:20 | Solana, D. R., Sangiorgio, V., Redondo, J., and Gulzari, M., 'Sound Diffusion Properties of Triply Periodic Minimal Surfaces', University College Dublin. |
| 17:45 | Krishnamurthy, V. B., Abdoli, E., Tadibi, A., Zakaria, Y., and Allam, A., 'Characterizing the Effective Viscoelastic Properties of 3D Printed Polymers', University of Cincinnati. |
Cincinnati: Rememberance session
CINCIN - Tuesday 8 Sep 2026
| 10:10 | Sas, P., 'Collaboration between KU Leuven and University of Cincinnati and the story of ISMA courses and conferences', Emeritus KU Leuven. |
| 10:35 | Mergeay, M., 'Pioneering automotive case studies in Leuven – early years of LMS International', Co-founder of LMS International, CEO MM Corporation. |
| 11:00 | Kennedy, J., 'Applications of novel sintered metal powder laminates for noise control', Trinity College Dublin. |
| 11:25 | Leuridan, J., 'From PHD student in Cincinnati to CTO of LMS International', Former Senior Vice-President of Simcenter - Siemens Simulation and Test Solutions. |
| 11:50 | Mottershead, J., 'Scientific contributions of Dave Brown and Randy Allemang', Emeritus University of Liverpool, UK. |
| 12:15 | Blough, J., 'The story of SDRL and its worldwide heritage', Michigan Technological University, USA. |
Condition monitoring of rotating machinery
CMRM1 - Monday 7 Sep 2026
| 13:25 | Hughes, T., Smith, W., Peng, Z., El Badaoui, M., Diebold, J.-F., Leiber, M., Randall, R., and Borghesani, P., 'Fault signatures in healthy bearings with different clearance values', UNSW Sydney. |
| 13:50 | Li, Z., Mauricio, A., Verwimp, T., Ojo, D. S., Goossens, S., Berghmans, F., Taal, C., and Gryllias, K., 'Rolling element ball bearing fault size estimation using accelerometer and fiber Bragg grating sensors', KU leuven. |
| 14:15 | Antoni, J., Protopapadakis, G. E., Peeters, C., and Helsen, J., 'A Broader Class of Informative Decompositions: Theoretical Principles and Demonstrations', INSA Lyon. |
| 14:40 | Kuzio1, D., Witulska2, J., Wyłomańska2, A., Barszcz3, T., and Zimroz1, R., 'Evaluation of the impulsive character of disturbances in diagnostic signals', Wroclaw University of Science and Technology. |
| 15:05 | Tsialiamanis, G., Plavos, D., Song, Z., and Panagiotou, P. A., 'A graph-neural-network approach to fault characterisation in induction motors', University of Sheffield. |
CMRM2 - Monday 7 Sep 2026
| 15:55 | Zhu, R., Verwimp, T., Wen, H., Achilleos, A., Duarte Vieira de Sousa, H., Maria Dima, E., Velis, K., Vaerenberg, R., and Gryllias, K., 'Cyclostationarity-based indicators for gear pitting progression tracking', KU Leuven. |
| 16:20 | MOSHI NGELE, E., NGANDU KALALA, G., BOUJELBEN, A., CHIEMENTIN, X., and KILUNDU, B., 'Digital Twin-Assisted Interpretation for Online Diagnosis in Unsupervised Bearing Monitoring', University of Reims Champagne-Ardene. |
| 16:45 | Burel, A., Thibault, N., Bourdon, A., Lecouvreur, D., Neveux, N., and Rémond, D., 'Harmonic tone analysis of roller bearing faults in a gearbox using instantaneous angular speed signals', INSA Lyon. |
| 17:10 | Grosso, P., Battarra, M., and D'Elia, G., 'Physics-driven estimation of rolling-element bearing fault extension by means of Monte Carlo approach', University of Modena and Reggio Emilia. |
| 17:35 | Wodecki, J., and Michalak, A., 'Enhancement of CSC map by statistic-driven spatial filtration and its application to local damage detection', Wrocław University of Science and Technology. |
| 18:00 | KAYALA, T., CHIEMENTIN, X., BOLAERS, F., KILUNDU, B., KAZADI, H., and BOUJELBEN, A., 'ON THE PARAMETRIC SENSITIVITY OF BEARING RUL PROGNOSTICS MODELS UNDER VARIABLE OPERATING CONDITIONS: COMPARISON WITH CLASSICAL EKF AND PARTICLE FILTERING APPROACHES', Université de Reims Champagne-Ardenne. |
CMRM3 - Tuesday 8 Sep 2026
| 08:30 | Artiano, A., Di Marcoberardino, S., Pizzolante, F., Tarabra, M., and Mucchi, E., 'A novel indicator for gear fault diagnosis in complex agricultural machinery based on the time synchronous average', University of Ferrara. |
| 08:55 | Heibatian, M., Li, Z., Mauricio, A. R., Verwimp, T., de la Hucha Arce, F., Hirde, A., OJO, D. S., Goossens, S., Berghmans, F., and Gryllias, K., 'Fault Detection of Bearings using Health Indicators based on Fiber Optic Sensing', KU Leuven. |
| 09:20 | Taal, C., Baggeröhr, S., Li, Z., and Gryllias, K., 'Effect of Spall Size in Rolling Element Bearings on the Enveloped Harmonic Amplitudes', SKF. |
CMRM4 - Tuesday 8 Sep 2026
| 10:10 | Protopapadakis, G., Kestel, K., Peeters, C., Leclère, Q., Antoni, J., and Helsen, J., 'Genetic optimization of the Multi-Order Probabilistic Approach for condition monitoring of variable speed machinery', Vrije Universiteit Brussel. |
| 10:35 | Flores Hernández, R. F., Oulerich, C., Marsick, A., Bourdon, A., Chevallier, G., Sadoulet-Reboul, E., and Rémond, D., 'A multibody-based digital-twin for efficient bearing fault simulation and analysis in rotating machines', Institut National des Sciences Appliquées de Lyon (INSA Lyon). |
| 11:00 | Schmidt, S., Wilke, D. N., and Gryllias, K. C., 'Classifier-induced damage parameter coupling as a potential failure mode in supervised condition monitoring', University of Pretoria. |
| 11:25 | Lucchese, A., D'Elia, G., and Cocconcelli, M., 'Blind signal extraction of cyclostationary sources: a Bayesian approach', University of Modena and Reggio Emilia. |
| 11:50 | Yvon, T., André, H., Leclere, Q., Rémond, D., and Morel, H., 'An Angular Localization Method for Monitoring and Diagnosis of Geared Mechanical Transmissions Using Instantaneous Angular Speed Analysis Based on the Assumption of a Cyclic Signature', Université Jean Monnet de Saint-Etienne. |
CMRM5 - Tuesday 8 Sep 2026
| 13:35 | Tounsi, I., Karkafi, F., El Badaoui, M., and Guillet, F., 'Second-Order Cyclostationary Modeling and Reduction of Reconstruction Noise in Irregular Sampling', Safran Tech/ Laspi. |
| 14:00 | Achilleos, A., Verwimp, T., Zhu, R., Wen, H., and Gryllias, K., 'Correlation of Order-Induced Modal Amplification and Gear Pitting Progression in Variable-Speed Gearbox Testing', KUL. |
| 14:25 | Knust Domingues, R., and Cordioli, J., 'Evaluating a Self-Supervised Pretraining Strategy for Bearing Fault Diagnosis with 1D CNNs and Leakage-Controlled Splits', Federal University of Santa Catarina. |
| 14:50 | Bourdalos, D., Sakellariou, J., and Fassois, S., 'A Harmonic-Regression ARMA model for rotating machinery dynamics identification and fault detection under varying conditions', University of Patras / Stochastic Mechanical Systems & Automation Lab. |
CMRM6 - Tuesday 8 Sep 2026
| 15:40 | Sekini, M., El Yousfi, B., Benkedjouh, T., and Lourari, A. W., 'A Physics-Informed Resonance Framework for Robust Bearing Fault Classification in Variable-Speed Regimes', Ecole Militaire Polytechnique, Algiers, Algeria. |
| 16:05 | el khabbazi, k., Antoni, J., Girardin, F., Talon, A., and Van Ruymbeke, B., 'Beyond Spectral Peaks : Background Power Spectral Density Estimation for Blade Tip Timing Signals', Laboratoire vibrations acoustique. |
| 16:30 | Saramantas, I., Iliopoulos, I., Sakellariou, J., and Fassois, S., 'A Machine Learning-Type Signal Decomposition-Based Method for Vibration-Based Propeller Anomaly Diagnosis in Quadcopter UAVs under Operational Uncertainty', University of Patras / Stochastic Mechanical Systems & Automation Lab. |
| 16:55 | Sibanda, T., Antoni, J., and Leclere, Q., 'Cage resynchronization for improved trending of rolling element bearings fault size', INSA Lyon. |
| 17:20 | Kuzio, D., Witulska, J., Zimroz, R., Mauricio, A. R., Gryllias, K., and Wylomanska, A., 'Robust cyclic spectral coherence for local damage identification in non-Gaussian signals: a statistical approach for damage related pattern extraction', Wrocław University of Science and Technology. |
| 17:45 | Verwimp, T., Li, Z., and Gryllias, K., 'Ball bearing fault size estimation based on IAS', KU Leuven. |
CMRM7 - Wednesday 9 Sep 2026
| 10:35 | PAPET-LEPINE, A., ANDRE, H., FARHAT, M. H., REMOND, D., and DUPONT, J.-B., 'Towards Robust and Autonomous Bearing Diagnosis: An Enhanced BeaFEM for Multiple Bearings with Similar Kinematics', Vibratec SAS. |
| 11:00 | Conte, F., Giovannardi, E., Chieffi, L., Delvecchio, S., and Cocconcelli, M., 'Automated powertrain diagnostics: algorithm and application', University of Modena and Reggio Emilia. |
| 11:25 | Yazdanianasr, M., and Gryllias, K., 'Load-dependent effects on carrier frequency activation and band selection for fault diagnosis of rolling element bearings', KULEUVEN. |
| 11:50 | Puruncajas, B., and Castellani, F., 'Explainable Deep Learning Framework for Early Gearbox Fault Detection in Wind Turbines Using SCADA Data', Escuela Superior Politécnica del Litoral. |
Damping
D - Tuesday 8 Sep 2026
| 08:30 | Helfer, J.-L., Gabrielli, F., Salamin, L., Saudan, H., Blondiaux, N., Hayoz, S., Crenna, M., and Cosandier, F., 'Compliant structures integrating passive damping', CSEM. |
| 08:55 | Silva, C., Rustighi, E., and Gonçalves, P., 'Experimental analysis of the dynamic behavior of magnetorheological elastomer vibration absorbers', UNESP. |
| 09:20 | AUGER, M., TITTARELLI, R., and OUISSE, M., 'Variational Physics-Informed Neural Networks for Inverse Identification of Localized Viscoelastic Damping in Beams', FEMTO-ST. |
Dynamic environmental testing
DET - Tuesday 8 Sep 2026
| 13:35 | Delonnoy, C., Khalij, L., Bareille, O., Azianou, A., Aktir, Y., and Caumette, L., 'Damage investigation of a truck-mounted mechanical structure subjected to combined loads', Thales. |
| 14:00 | Araújo, R., Garcia de Miguel, A., Forrier, B., Donà, M., Musella, U., and Di Lorenzo, E., 'Optimization and assessment of shaker placement in multi-exciter multi-axis vibration testing', Siemens DISW / KU Leuven. |
| 14:25 | Dal Borgo, M., Musella, U., Bentivoglio, F., de Miguel, A. G., Pastorino, R., Di Lorenzo, E., and Peeters, B., 'Real-time virtual shaker testing using hybrid coupling for shaker, head expander and device under test', Siemens Digital Industry Software. |
| 14:50 | Denis, S., Hoffait, S., Daniel, S., and Olivier, D. M., 'Toward Automated Mistuning Identification of Blisks: A Comparison Between Lightweight Electrodynamic Excitation and High-Force Electrodynamic Shakers', V2i S.A.. |
| 15:15 | Miller, M., Schneider, R., and Quinn, D. D., 'Improved Alternative Pyroshock Test Design and Modeling', Sandia National Laboratories. |
Dynamic testing: methods and instrumentation
DT1 - Monday 7 Sep 2026
| 15:30 | Maierhofer, J., and Rixen, D., 'Comparative Optical Measurement of Abdominal Aortic Dynamics Using LDV, LLT, and DIC', Technical University of Munich. |
| 15:55 | Been, W., Gothard, A., Anton, S., Henderson, C., Ort, D., Taggart, A., and Hanson, E., 'Vibration Criterion (VC) Curves: Best Practices and Case Study', Tennessee Tech University. |
| 16:20 | Xu, W., Muggleton, J. M., Kalkowski, M., and White, P. R., 'Distributed acoustic sensing with a helical fibre configuration for water pipeline monitoring', University of Southampton. |
| 16:45 | Keizer, T., and Bartlema, P., 'In-Situ Characterization of Mount Transfer Functions for Fluid-Filled Rubber Bellows', Damen Research, Development & Innovation. |
| 17:10 | Kimpián, T., and Augusztinovicz, F., 'Introduction of Resonance Response Reduction (R3) algorithm for FRF measurements of lightly damped structures', thyssenkrupp Components Technology Hungary Ltd.. |
| 17:35 | Tang, M., and Böswald, M., 'Applicability of Force Appropriation for Mode Tuning of Aircraft', DLR. |
| 18:00 | Kimpian, T., and Dombovari, Z., 'Merging dispersed modes due to mass placement using impulse dynamic subspace', Budapest University of Technology and Economics. |
DT2 - Tuesday 8 Sep 2026
| 10:10 | Tomitaka, T., Sasano, S., Yahagi, S., Yonezawa, H., Yonezawa, A., Kajiwara, I., and Hosoya, N., 'Inertial-mass dielectric elastomer actuator enabling tuneable excitation frequency and amplitude', Shibaura Institute of Technology. |
| 10:35 | Forlano, S., Lonzi, B., D'Antuono, A., and Martarelli, M., 'Experimental Characterization of Dynamic Response and Energy Dissipation in Additively Manufactured Lattice Structures', Università Politecnica delle Marche. |
| 11:00 | Daga, A. P., Anastasio, D., and Viale, L., 'Electromechanical modeling and experimental characterization of piezoelectric transducers for vibration sensing', Politecnico di Torino. |
| 11:25 | Stoppel, J., Popławski, B., and Mikułowski, G., 'Contactless Identification of Excitation Parameters for a Large Membrane-Type Pneumatic Energy Absorber Using LiDAR Technology', Institute of Fundamental Technological Research POLISH ACADEMY OF SCIENCES. |
| 11:50 | Boonen, R., 'Development of a setup to measure the dynamic complex modulus of pretensioned elastomer samples in a broad frequency range', KULeuven. |
Dynamics of Joints
JOINT - Monday 7 Sep 2026
| 15:30 | Mace, T., Lad, B., and Schwingshackl, C., 'Experimental Characterisation of OGV Nonlinear Vibration', Imperial College London. |
| 15:55 | Morris, J., Bonney, M., and Haddad Khodaparast, H., 'Experimental Quantification of Coupled Thermal-Mechanical Nonlinearities in a Bolted Joint', Swansea University. |
| 16:20 | Witteveen, W., 'On the Dynamic Simulation of Finite Element Models with Interference Fits', University of applied Sciences Upper Austria. |
| 16:45 | Brown, D. J., Jalali, H., Farokhi, H., and Wicks, R. T., 'Experimental identification of an efficient dynamic model for multi-nut joints in large space structures', Northumbria University. |
| 17:10 | Liu, F., and Yue, L., 'Study on the Effects of Contact Interface Parameters of Spigot–Flange Bolted Connections on Rotor Dynamic Characteristics', Nanjing University of Aeronautics and Astronautics. |
| 17:35 | Fonseca, L., Knust, R., Cordioli, J., and Miron, G., 'Detection of Preload Loss in Shear Bolted Joints in an impact excited system using Auto-Regressive Coefficients and outlier detection', University of Santa Catarina (UFSC). |
| 18:00 | Vergouwen, B., Vanpaemel, S., and Naets, F., 'Identification of the Dynamic Material Properties of Vibration Mounts - a Case Study on Engine Mounts', KU Leuven / Flanders Make @ KU Leuven. |
Dynamics of Rotating Machinery
RMD1 - Wednesday 9 Sep 2026
| 08:30 | Thomas, C., Ondra, V., and Schwingshackl, C. W., 'Development of a vibration management concept for gas turbine engines', Imperial College London. |
| 08:55 | Renkin, V., and Salles, L., 'Parallel Harmonic Balance Method for Rotating Nonlinear Mechanical Systems', University of Liege. |
| 09:20 | Goudelin, R., Diebold, J.-F., and El Badaoui, M., 'Agnostic Change Point Detection in Vibration Spectra for Rotating Machinery Predictive Maintenance', Safran. |
RMD2 - Wednesday 9 Sep 2026
| 10:35 | Fendillo, L., Voltolini, E., Ferrarini, B., Vezzani, L., Gianaroli, F., Manconi, E., and Toscani, A., 'Orbit-Based Identification of Unbalance in Overhung Rotors UsingPhysics-Informed Machine Learning', University of Parma. |
| 11:00 | Rytömaa, S., Santos, I., and Viitala, R., 'Parametric Excitation due to paper roll surface waviness in paper winders', Aalto University. |
| 11:25 | Michalak, A., Wodecki, J., Zimroz, R., and Wyłomańska, A., 'Instantaneous shaft speed extraction through tensor factorization of the short-term Fourier transform of vibration/acoustic signals', Wrocław University of Science and Technology. |
RMD3 - Wednesday 9 Sep 2026
| 13:35 | Yi, C., Feng, H., Xiao, Y., Zhu, Z., Ren, P., Zhang, Z., Zhou, Q., and Liu, J., 'Research on the impact phenomenon in rigid-flexible coupling multi-stage gear transmission system', Beijing Institute of Technology School of Mechanical Engineering. |
| 14:00 | Croes, J., Oguz Inci, E., and Soliman, A., 'Mechanical Design and Kalman Filter-Based Signal Processing for a High-Resolution Encoder Using Accelerometer Measurements', FORCEBIT BV. |
| 14:25 | Tatli, B., Bal, R. B., and Yildiz, O., 'Effect of Axial Preload on the Dynamics of Double-Row Angular Contact Ball Bearing', ROKETSAN. |
| 14:50 | Sabahi, I., Vermaut, M., Janssens, D., Hirde, A., Samuel Ojo, D., Frans Goossens, S., and Naets, F., 'Estimation of Lumped Bearing Loads in Mechanical Systems Using Fiber Optic Sensors', KUL. |
| 15:15 | tavakolian, F., Mashayekhi, F., Firrone, C. M., and Zucca, S., 'Self-Excited Vibrations in Turbine Blades with Underplatform Dampers: A Comparative study', Politecnico di Torino. |
| 15:40 | Iaffaldano, D., Guida, R., and Carassale, L., 'Experimental Validation of System Identification Approaches for Time-Variant Mechanical Systems in Resonance Crossing', University of Genova. |
Dynamics of civil structures
CIV - Tuesday 8 Sep 2026
| 13:35 | Cebulj, S., Taddei, F., and Müller, G., 'Nonlinear Dynamic Response of Buildings Subjected to EGS-Induced Seismicity', Technical University of Munich. |
| 14:00 | Theunissen, K., Matarazzo, T. J., and Pakzad, S. N., 'Complex SVD-based mode shape estimation using mobile sensing data', Lehigh University. |
| 14:25 | Anastasopoulos, D., Chatzi, E., Lombaert, G., and Reynders, E., 'A Hybrid Optimal Sensor Placement Framework for OMA Using FBGs and Accelerometers: Application to a Vierendeel Truss Bridge', KU Leuven. |
| 14:50 | Iacussi, L., Cigada, A., and Chiariotti, P., 'Efficient Real-Time Modelling of Vehicle–Bridge Dynamics Interaction via Coupled State-Space Models', Politecnico di Milano. |
Fatigue Analysis, Characterization & Testing Strategies
FACTS1 - Wednesday 9 Sep 2026
| 08:30 | Battarra, M., Bortoluzzi, F., Cristofori, G., Mucchi, E., and Dalpiaz, G., 'A dynamic model of the vehicle door slamming for calibration of durability test rigs', University of Ferrara. |
| 08:55 | Česnik, M., and Slavič, J., 'Full-field monitoring of vibration-fatigue cracks using temperature–amplitude spectrum approach in dynamic testing', University of Ljubljana. |
| 09:20 | Lahidalga, L., Calvín, G., Leciñana, I., and Manterola, J., 'Assessment and validation of the developed vibrational fatigue method for laser-welded battery modules', IKERLAN. |
| 09:45 | Tseng, P.-Y., Kalathiparambil Kennedy, L., Duthé, G., and Chatzi, E., 'From Turbine to Wind Farm: Graph Neural Network-Based Estimation of Main Bearing Fatigue Loads', ETH Zürich. |
FACTS2 - Wednesday 9 Sep 2026
| 10:35 | Garcia de Miguel, A., Sanz Granados, C., Musella, U., Dal Borgo, M., and Chimeno, M., 'A modal-based mission synthesis framework for fatigue testing of aerial systems subjected to distributed loadings', Siemens Industry Software SL. |
| 11:00 | Tincani, S., Claeys, C., Deckers, E., Pandiya, N., and Dindorf, C., 'Assessing the fatigue life of a Locally Resonant Metamaterial solution', Robert Bosch GmbH / KU Leuven. |
| 11:25 | Ristic, N., and Leitner, M., 'Uncertainties in structural dynamics and their influence on fatigue analysis', Graz University of Technology. |
| 11:50 | Curti, G., Vacca, N., Antoni, J., Palmieri, M., and Cianetti, F., 'A New Signal Model for Reproducing Fatigue-Relevant Non-Stationary Excitations', Università degli Studi di Perugia. |
Fluid-structure interaction
FSI - Tuesday 8 Sep 2026
| 08:30 | Saunders, J. W., Titurus, B., and Cooper, J., 'Analysis of damping in a coupled beam-tank system undergoing pitch-heave free vibration', University of Bristol. |
| 08:55 | Hu, Y., Muggleton, J., and Kalkowski, M., 'Dispersion and frequency response of an embedded rod for vibro-acoustic sensing of buried fluid-filled pipes', The University of Southampton. |
| 09:20 | Pavic, G., 'Enhanced analysis of pressure dynamics in pipes using multi-parameter digital twinning', INSA de Lyon. |
| 09:45 | Fabbri, D., Bruzzone, F., Meirelles Pereira, L., Araujo Bonomo, L., Avallone, F., Cordioli, J., and Rosso, C., 'Numerical and experimental analysis of the influence of structural vibration on TBL excitation', Politecnico di Torino. |
Inverse Methods - Load Identification
INV - Wednesday 9 Sep 2026
| 08:30 | Wu, P., Östling, D., Liljerehn, A., Magnevall, M., and Gunnarsson, T., 'Kalman Filter–Based Sensor Fusion for Cutting Force and Tool-Tip Displacement Estimation in Sensorized Damped Cutting Tools', AB Sandvik Coromant. |
| 08:55 | Park, M., and Kim, J.-G., 'A Study of Vision-Based Inverse Force Identification for Unmeasured Vibration Response Estimation', Kyung-Hee university. |
| 09:20 | Lu, H., McFarland, D. M., Cheng, X., Han, T., Jiang, H., and Jin, J., 'Fitting Assumed Accelerations in Granular Media through Measured Acoustic Pressures', Eastern Institute of Technology. |
| 09:45 | Algermissen, S., Misol, M., Gröhlich, M., Norambuena, M., and Wandel, M., 'Inverse Identification of Operational Loads on an Aircraft Sidewall Panel', German Aerospace Center (DLR). |
Metramat & Metavision
Mid to high frequencies
MHF - Tuesday 8 Sep 2026
| 10:10 | Lockett, R. J., and Chappell, D. J., 'A Discontinuous Galerkin approach for the radiative transfer approximation of high frequency vibrational energy distributions in complex built-up structures', Nottingham Trent University. |
| 10:35 | Duhamel, D., 'Efficient computation of the dynamic response of finite two-dimensional elastic periodic structures', Ecole Nationale des Ponts et Chaussees. |
| 11:00 | Silva, O., and Lenzi, A., 'Design of Vibration Isolators and Absorbers via Power Flow and Topology Optimization', Federal University of Santa Catarina. |
| 11:25 | Mardanshahi, A., Pahlavan, L., Fotouhi, M., Van Den Abeele, K., and Chronopoulos, D., 'A Semi-Analytical Hybrid Model for Simulating Ultrasound Wave Propagation in Large, Complex, Damaged Composite Plates', KU Leuven. |
| 11:50 | King, M. J., Richter, M., Tanner, G., Hargreaves, J., Hoseyni, S. M., and Meggitt, J. W. R., 'Hybrid modeling of structural intensity in complex built-up assemblies – Part II: Experimental dynamical energy analysis', University of Nottingham. |
Model Order Reduction
MOR - Wednesday 9 Sep 2026
| 13:35 | Mencik, J.-M., Cimpuieru, M., Ghadami, A., Reynolds, M., and Epureanu, B., 'A parametric model order reduction strategy based on matrix interpolation and neural networks in structural dynamics', INSA Centre Val de Loire. |
| 14:00 | Usmanov, U., Battiato, G., and Firrone, C. M., 'Experimental Validation of a Free-Interface Blade Mistuning Reduced-Order Model for Mistuned Bladed Disks', Polytechnic University of Turin. |
| 14:25 | Komis, I. N., and Chronopoulos, D., 'Frequency-Limited Model Order Reduction for Ultrasonic Digital Twins', KU Leuven. |
| 14:50 | Saccani, A., and Tiso, P., 'Extending Craig-Bampton Reduction to Geometrically Nonlinear Structures', ETH Zürich. |
| 15:15 | Betti, F., Tiso, P., and Chatzi, E., 'Parametric reduced-order surrogate models for railway dynamics under braking conditions', ETH Zürich. |
Multi-body dynamics and control
MB - Tuesday 8 Sep 2026
| 08:30 | Chumai, W., 'Investigate the Effect of Single Helical Gear Transmission Error on Coupled Torsional-Longitudinal Vibration in Marine Rotor System', Kyushu University. |
| 08:55 | Mammini, F., Pinelli, M., Sgamma, M., Bucchi, F., and Frendo, F., 'Experimental Validation of a Reduced Flexible Multibody Model of a Forklift Mast for Structural Loads Prediction', Università di Pisa. |
| 09:20 | Martini, A., Eidinejad, H., and Rivola, A., 'Investigation on the whole-body vibrations mitigation effectiveness of a marine shock isolation seat for high speed crafts', Alma Mater Studiorum - University of Bologna. |
Non-linearities: identification and modelling
NL1 - Monday 7 Sep 2026
| 13:25 | Tosato, F., G. Marinus, B., Harri, K., and Moiny, F., 'Nonlinear Blast Propagation over Porous Ground: Validation of an Axisymmetric NPE Solver and Bayesian Ground Parameter Identification', royal military academy. |
| 13:50 | Winand, F., Collette, C., and Kerschen, G., 'Data-driven tuning of phase-locked loops for nonlinear vibration testing', Uliège. |
| 14:15 | Pacini, B., and Davis, C., 'Efficient prediction of random vibration response of nonlinear structures using a base-driven nonlinear modal model', Sandia National Laboratories. |
| 14:40 | Scheel, M., Hippold, P., Hayashi, S., and Krack, M., 'Presenting an open-source tool for experimental nonlinear modal analysis: the Backbone Tracker', University of Stuttgart. |
NL2 - Tuesday 8 Sep 2026
| 08:30 | Renkin, V., Zhu, X., Salles, L., and Yuan, J., 'Experimental and Numerical Investigation of the Nonlinear Dynamics of a Highly Flexible Wing', University of Southampton. |
| 08:55 | Goldack, M., Groß, J., Krack, M., and Stender, M., 'Neural surrogate for replacing AFT-based frictional contact evaluation in the HBM', Technische Universität Berlin. |
| 09:20 | Mesny, L., Dekemele, K., Baguet, S., Habib, G., Michon, G., and Chesné, S., 'A Hybrid Nonlinear Energy Sink with Adaptive Nonlinear Stiffness Tuning for High-Energy External Excitations', ISAE-SUPAERO / ICA. |
| 09:45 | Erdelyi, J., and Gazdagh, Z., 'Nonlinear time series data generation in high dimensional parameter space', Robert Bosch Kft. |
NL3 - Tuesday 8 Sep 2026
| 10:35 | Schiavone, N., Raze, G., and Kerschen, G., 'Arclength Control-Based Continuation for Experimental Analysis of Nonlinear Autonomous Systems', Université de Liège. |
| 11:00 | Saccorotti, L., Guida, R., and Carassale, L., 'Slow-Time-Scale Implementation of Phase-Locked Loop for Nonlinear Systems Testing', Università di Genova. |
| 11:25 | Wick, T., and Peter, S., 'The potential of PLL-based resonance tracking in hearing diagnostics', Reutlingen University. |
| 11:50 | Gualdi, D., Guercioni, G. R., Sorrentino, S., and De Felice, A., 'Post bifurcation analysis of self-excited vibration in automotive clutch differentials', University of Modena and Reggio Emilia. |
NL4 - Tuesday 8 Sep 2026
| 13:35 | Saponaro, A., Battiato, G., Firrone, C. M., and Zucca, S., 'Multiharmonic Nonlinear Dynamic Analysis of Mechanical Assemblies with Frictional Contacts Using FETI', Politecnico di Torino. |
| 14:00 | Dekemele, K., Venugopal, H., Habib, G., and Loccufier, M., 'Nonlinear Energy Sink with Saturating Stiffness for Harmonic and Transient Vibration Control', University of Liège. |
| 14:25 | Fasihi, A., Kudra, G., GhandchiTehrani, M., and Awrejcewicz, J., 'Combined Effects of Spin and Flow on the Dynamics of Slender Pipes', Lodz university of technology. |
| 14:50 | Morel, P., Prabel, B., Alcorta, R., Fayard, J.-L., and Baguet, S., 'Planar Nonlinear Dynamics of a Vibro-Impacting Tribometer: Numerical Simulation and Experiment', CEA Paris-Saclay. |
NL5 - Tuesday 8 Sep 2026
| 15:40 | Gaillard, D., Prabel, B., and Prevost, L., 'Treatment of adherent contacts using Lagrange Multipliers in explicit modal dynamics', Université Paris-Saclay, CEA, Service d’Études Mécaniques et Thermiques, 91191 Gif-sur-Yvette, France. |
| 16:05 | Dekreon, X., Alcorta, R., Koechlin, S., and Remond, D., 'Impact of angular speed assumptions on the nonlinear dynamics of a permanent magnet synchronous machine', LaMCoS - INSA Lyon. |
| 16:30 | Dassi, L., Chatterton, S., Riva, A., and Pennacchi, P., 'Nonlinear Modeling of Axial Sub-Synchronous Vibrations in Gas Turbines with Hydrodynamic Thrust Bearings', Politecnico di Milano - Dipartimento di Meccanica. |
| 16:55 | Huang, M., and Yuan, J., 'Design and Analysis of Customized Friction-Based Nonlinear Energy Sinks for Flexible Wing Vibration Mitigation', University of Southampton. |
| 17:20 | Goyder, H., 'Perfect modelling of linear and nonlinear vibration decay time histories: Successes and challenges', Cranfield University. |
| 17:45 | Mesny, L., and Alcorta, R., 'Energy transfer assessment of an essentially-nonlinear chain of oscillators', ISAE-SUPAERO / ICA. |
NL6 - Wednesday 9 Sep 2026
| 13:35 | Ramseyer, L., Mélot, A., Noël, R., and Droz, C., 'Analysis of non-linear wave scattering in semi-infinite seismic metamaterials using a wave-based formulation', INRIA. |
| 14:00 | Ristic, N., Rezaee, H., Sever, I. A., and Renson, L., 'Force-controlled Vibration Testing of Nonlinear Structures Exhibiting Quasi-periodic Responses', Imperial College London. |
| 14:25 | Culla, A., Tonazzi, D., Michetti, S., and Massi, F., 'Random Perturbations and Friction Instabilities: a Statistical Linearisation Approach', University of Rome La Sapienza. |
| 14:50 | Hickey, J., and Butlin, T., 'A Frequency Domain Equivalent Linearization Technique for Analysis of Nonlinear Systems', Trinity College Dublin. |
| 15:15 | Masi, R., Franci, R., Pancaldi, D., and Troncossi, M., 'Electro–Elastodynamic Modeling of High-Power Ultrasonic Transducers', University of Bologna. |
| 15:40 | Gal, I., Fichera, S., Mottershead, J. E., Bi, S., Gambioli, F., Menga, E., and Isnardi, I., 'Experimental Nonlinearity Localisation on a Wing-Box like Structure with Adjustable Stiffness', University of Liverpool. |
Optical Methods & Computer vision for Vibration Engineering
OMCV1 - Monday 7 Sep 2026
| 13:25 | Touzet, J., Marsick, A., Chesne, S., Leclere, Q., and Andre, H., 'Video-Based Experimental Modal Analysis of a Rotating Bladed Structure', Safran Aircraft Engines. |
| 13:50 | Slavič, J., and Čufar, K., 'Omnidirectional camera-based full-field 3D modal identification', University of Ljubljana. |
| 14:15 | Capponi, L., Zaletelj, K., Rossi, G., and Slavič, J., 'Thermoelasticity-based Stress Mode-shape Identification in Rotating Structures', University of Ljubljana. |
| 14:40 | Enriquez, O., Margallo, E., Montoya, E., Rubio, J. L., and Pandraud, G., 'A Photonic Integrated Light-Field Optical Method for High-Dynamic-Range, Non-Contact Vibrometry', Ommatidia LiDAR. |
| 15:05 | Neri, P., Paoli, A., and Razionale, A. V., 'A Mechanical Regularization Approach to Dynamic Strain Computation from DIC', University of Pisa. |
OMCV2 - Monday 7 Sep 2026
| 15:55 | Cavenaghi Campos, B., de Carvalho Almeida, A., Lobato de Almeida, F. C., Carneiro Junior, J. P., Brennan, M., and Paupitz Gonçalves, P. J., 'High speed camera analysis of wave propagation in one-dimensional waveguide fitted with vibration absorbers', UNESP. |
| 16:20 | Schedlinski, C., Herfert, D., Krause, J., Gollnick, M., and Henning, K., 'Image-Based Vibration Analysis: Precision and Limitations Compared to Classical Methods', ICS Engineering GmbH. |
| 16:45 | Zanarini, A., 'About the retrieval of airborne structural forces by means of full-field optical approaches', University of Bologna. |
| 17:10 | Stazi, F., Fusiello, A., Gardonio, P., Bernardini, R., and Rinaldo, R., 'Event-Based Velocimeter for Vibration Measurements', University of Udine. |
| 17:35 | D'Alessio, V., Cesaretti, A., Mastrodicasa, D., Di Lorenzo, E., Firrone, C. M., and Botto, D., 'Large-Rotation Tracking for Full-Field Dynamics of Rotating Structures', Politecnico di Torino. |
| 18:00 | Wang, Y., Kamper, M., and Naets, F., 'FRF-based state-space modeling and optimization for force identification using camera-based measurements', KU Leuven. |
OMCV3 - Tuesday 8 Sep 2026
| 16:05 | Gungl, S., Istók, B., Masood, M. D., Waqas, M., Kimpián, T., and Horváth, C., 'Investigation of the vibration modes of a drone rotor using optical methods', thyssenkrupp Components Technology Hungary Kft.. |
| 16:30 | Visconte, M., Cosco, F., Cicirello, A., Mastrodicasa, D., Di Lorenzo, E., and Mundo, D., 'Learning-Based vs Phase-Based Modal Magnification: An Objective and Perceptual Performance Assessment Framework', University of Calabria. |
| 16:55 | Willems, T., del Fresno Zarza, J., Gallas, S., and Naets, F., 'Comparison of camera-based measurements with wireless accelerometers for the analysis of the gyroscopic frequency splitting in a rotating tire under increasing rotational speeds', KU Leuven. |
| 17:20 | Huertas-Charriel, C., Molina-Viedma, Á., Felipe-Sesé, L., Almazán-Lázaro, J. A., López-Alba, E., and Díaz-Garrido, F., 'A narrowband stepped excitation approach for wide spectrum full-field displacement characterization using high-resolution cameras', Universidad de Jaén. |
| 17:45 | Mastrodicasa, D., Dal Borgo, M., and Gardonio, P., 'Optical-based Measurement of Panel Sound Radiation under Deterministic and Stochastic Excitations', Siemens Industry Software NV. |
Periodic structures and metamaterials
PER1 - Tuesday 8 Sep 2026
| 10:10 | Oliveira, F., and Campos dos Santos, J., 'Wave Propagation Analysis of a Viscoelastic Sandwich Phononic Beam Using the Spectral Element Method', Unicamp. |
| 10:35 | Robinson, G., Rongong, J., Crawforth, P., and Sims, N., 'The Clapper: Design and Experimental Validation of a Locally Resonant Impact-Damped Metamaterial', The University of Sheffield. |
| 11:00 | Singleton, L., and Cheer, J., 'A synergetic multi-band elastic metamaterial combining energy harvesting and nonlinear voltage source shunts to enhance performance', University of Southampton. |
| 11:25 | Cho, J., and Langfeldt, F., 'Topology optimization of plate-type acoustic metamaterials for broadband sound insulation', University of Southampton. |
| 11:50 | Salam Claro, D., Ribeiro, L. H. M. S., and Arruda, J. R. F., 'Experimental analysis of wave propagation in radially periodic structures', University of Campinas. |
PER2 - Tuesday 8 Sep 2026
| 13:35 | Ruppel (M.Eng), N., Schmidt (M.Eng), A., Pianowski (M.Eng), R., and Hannebauer (Prof. Dr.-Ing.), D., 'Experimental validation of a design methodology for vibroacoustic metamaterials using additively manufactured metal resonators with integrated particle damping', Technical University of Applied Sciences Wildau. |
| 14:00 | Lucena, R., Dos Santos, J. M. C., and Rodríguez, R. Q., 'Using Bandgap Defect Modes in an Elastic Metamaterial Plate for Damage Detection', The University of Alabama. |
| 14:25 | Gardonio, P., Codutti, F., Ortis, L., Rustighi, E., Malacarne, C., and Perini, M., 'Tuneable metamaterial panel for tonal vibration over a wide range of frequencies', Università degli Studi di Udine. |
| 14:50 | Rustighi, E., Raffaele, D., Gardonio, P., Malacarne, C., and Perini, M., 'Pressure-Controlled Wave Propagation in Beam-Like Vacuum-Sealed Structured Fabrics', University of Trento. |
| 15:15 | Nunes, A. W., Beli, D., and Arruda, J. R. F., 'Elastic Wave Dynamics in Hyperbolic Lattices', UNICAMP. |
PER3 - Wednesday 9 Sep 2026
| 10:10 | Kleine-Wächter, L., Rumpler, R., and Müller, G., 'Wave Propagation and Mode Coupling Characteristics in Symmetry-Broken Kelvin-Cell Chains', Technical University of Munich. |
| 10:35 | BORGES DE MORAIS CRUVINEL, E. V., DE OLIVEIRA MONTEIRO, W. V., and DOS SANTOS, J. M. C., 'Spectral Dynamic Stiffness Analysis of Decorated Membrane Metamaterials', UNICAMP. |
| 11:00 | Firouzi, B., Sorokin, S., Claeys, C., and Deckers, E., 'Wave Propagation in Locally Resonant Metamaterial Doubly Curved plates', Aalborg university. |
| 11:25 | Brandão, J., Braghini, D., Camino, J., and Arruda, J., 'Comparing spatially periodic feedback and space-time modulation for unidirectional propagation in 1D acoustic waveguides', School of Mechanical Engineering - UNICAMP. |
| 11:50 | Schimidt, C., Janssen, S., Oliveira, L., Deckers, E., Clayes, C., and De Marqui, C., 'Tailoring Vibration Modes for Sound Directivity Control in Piezoelectric Metamaterials', EESC-USP. |
Railway dynamics and ground vibrations
RAIL - Tuesday 8 Sep 2026
| 15:40 | Noyori, M., 'Effect of slope protection works on reducing train-induced ground vibration', Railway Technical Research Institute. |
| 16:05 | Wu, Y., Shen, C., Dollevoet, R., and Li, Z., 'Vibration-based identification of longitudinal variation in track support stiffness at insulated rail joints', TU Delft. |
| 16:30 | Kabirian, Z., Carneiro, D., Degrande, G., and Lombaert, G., 'Optimization of a multimodal metasurface for broadband ground vibration mitigation', KU LEUVEN. |
| 16:55 | Shafieyoon, Y., Clot, A., and Arcos, R., 'Assessing the applicability of a moving roughness approach for railway-induced ground-borne vibration', Acoustical and Mechanical Engineering Laboratory (LEAM), Universitat Politècnica de Catalunya (UPC). |
| 17:20 | Sanitate, G., and Talbot, J. P., 'BiB software: an application for calculating the isolation performance of base-isolated buildings against ground-borne vibration', Ramboll. |
| 17:45 | Jones, M. R., Cross, E. J., and Lewis, R., 'Integrating physical knowledge in multi-fidelity Gaussian processes for monitoring railway stiffness', The University of Sheffield. |
Shock
SHOCk - Monday 7 Sep 2026
| 13:25 | Saputo, S., Carandente Tartaglia, C., and Quaranta, V., 'Development of a Digital Twin for Pyroshock Qualification Test Facility Through Experimental Correlation and Explicit FEM approach', CIRA S.c.p.a. |
| 13:50 | Pirard, E., Dubois, R., and Denis, S., 'Optimal parameters determination for shock device', V2i. |
| 14:15 | Viale, L., Fracasso, R., Daga, A. P., Fasana, A., and Garibaldi, L., 'Experimental Identification of a Pneumatic Gun for the Development of a High-Fidelity Digital Twin in Pyroshock Testing', Politecnico di Torino. |
| 14:40 | Blough, E., Walber, C., and Blough, J., 'Development and Validation of Vertical Shock Test Stand', Michigan Technological University. |
Space and aviation techniques/technologies
SAT1 - Tuesday 8 Sep 2026
| 14:00 | Cheng, Z., Ma, T., Yuan, H., and Wang, J., 'Uncertainty Quantification of Solar Sail Thrust and Trajectory Impact Analysis Based on Polynomial Chaos Expansion', National University of Defense Technology. |
| 14:25 | TISEO, B., RUFOLO, G., FAUCI, R., MELLONE, L., GARDI, R., INFANTE, G., DE STEFANO FUMO, M., PISANO, F., BRUNO, G., DI CRISCIO, I., SORRENTINO, A., FRAGIACOMO, M., CARANDENTE TARTAGLIA, C., and QUARANTA, V., 'Dynamic Qualification of the Ceramic Nose of the Space Rider Re-entry Module', CIRA - CENTRO ITALIANO RICERCHE AEROSPAZIALE. |
| 14:50 | Wang, J., Yuan, H., Luo, Q., Ma, T., and Cheng, Z., 'Nonlinear Vibration Response Analysis of Solar Sail Structures under Multi-Physical Field Coupling Excitation', National University of Defense Technology. |
| 15:15 | Wu, Z., Luo, Q., Zhang, C., Wang, J., and Yuan, H., 'Micro-vibration Characteristics and Imaging Performance Degradation in Large-Aperture Segmented Space Telescopes', National University of Defense Technology. |
SAT2 - Tuesday 8 Sep 2026
| 16:05 | Napolitano, K., Heyd, E., Schick, D., Peeters, B., Musella, U., and Sensor, C., 'Application of the Fixed Base Correction Method to Direct Field Acoustic Noise test data on the Emirates Mission to the Asteroid Belt Structural Test Article', Siemens Industry Software. |
| 16:30 | Zhang, C., and Luo, Q., 'Dynamics Modeling and Characteristic Analysis of On-Orbit Assembled Modular Telescope', National University of Defense Technology. |
| 16:55 | Borque-Gallego, G., Rousseaux, O., and Novo, D., 'Enhanced Microvibration Susceptibility Characterisation Testing Equipment', CSEM SA. |
| 17:20 | Ma, T., Cheng, Z., and Wang, J., 'Simulation Analysis of Nonlinear Rotation-Vibration Coupling Dynamics for Solar Sail Spacecraft with a Heterogeneous Sail Membrane', National University of Defense Technology. |
Structural dynamics: methods and case studies
SD1 - Tuesday 8 Sep 2026
| 08:30 | Yanagidate, N., and Komori, K., 'Virtual Sensing–Based Estimation of Vibration and Strain Responses Using a Full Product-Level Assembly Model in HVAC Compressor Units', Mitsubishi Electric Corporation. |
| 08:55 | Nozawa, S., and Serhat, G., 'Improving Dynamic Characteristics of Composite Structures through Co-Optimization of Topology and Fiber Orientations', KU Leuven. |
| 09:20 | Fiermonte, D., De Felice, A., Guerra, D., and Meleti, S., 'Integrated FE-Based Assessment of Tooth Flank Fracture and NVH Performance in Heavy-Vehicle Bevel Gears', Università degli studi di Modena e Reggio Emilia. |
| 09:45 | Brunnmayr, F., Mikota, G., Benedikt, P., and Hagleitner, G., 'Experimental modal analysis of the human arterial system under base excitation from the heart', Johannes Kepler University. |
SD2 - Tuesday 8 Sep 2026
| 10:35 | Kuci, X., Reumers, P., François, S., and Degrande, G., 'Newtonian Noise Analysis for the Einstein Telescope using the ANNA toolbox', KU Leuven. |
| 11:00 | Pena-Barrio, J., Merino, R., Munoa, J., Urreta, H., and Aguirrebeitia, J., 'RCSA-Based methodology for evaluating industrial equipment dynamic response on flexible floors: Analytical prediction and experimental validation', IDEKO, Member of Basque Research and Technology Alliance. |
| 11:25 | Fonseca, P. P., and Silva, T. A. N., 'On the prediction of chatter and its monitoring during machining of WAAM parts', NOVA FCT - UNIDEMI. |
| 11:50 | Kumar, J., and Modak, S. V., 'A Regularized Shooting–Continuation Approach for Nonlinear Normal Modes of Non-Smooth Mechanical System', Indian Institute of Technology Delhi. |
SD3 - Wednesday 9 Sep 2026
| 08:30 | Katkar, S., Gosavi, K., and Birajadar, R., 'Experimental and Multi-Physics Vibro-Acoustic Study of a Vertical Sealless Canned Motor Pump', Kirloskar Brothers Limited. |
| 08:55 | Balmes, E., Martin, G., and Vermot des Roches, G., 'Analysis of experimental squeal occurrences using a harmonic balance vector signal', SDTools / ENSAM. |
| 09:20 | Macquart, A., Gras, T., Corbin, F., and Boursier, F., 'Monitoring and Analysis of Orifice-Plate-Induced Cavitation Using Non-Intrusive PVDF Wire Sensors', CETIM. |
| 09:45 | Salazar Colunga, R., Pandiya, N., Dindorf, C., and Naets, F., 'Health Monitoring of Mechanical Systems via Kalman Filter-Based State Estimation', Robert Bosch GmbH. |
SD4 - Wednesday 9 Sep 2026
| 10:35 | Ortolani, A., Bianciardi, F., Martarelli, M., Chiariotti, P., and Scalise, L., 'In-silico vibration decoupling assessment on complex system: the tibia-external fixator case', Università Politecnica delle Marche. |
| 11:00 | Owens, W., Higgitt, C., and Chatzis, M., 'Monitoring of Music-Induced Vibrations in the National Gallery', University of Oxford. |
| 11:25 | Bartfai, A., Gabos, Z., Gazdagh, Z., and Dombovari, Z., 'A nonautonomous approach compared to numerical solutions for the dynamic response distortion of harmonically swept single-degree-of-freedom linear mechanical systems', Budapest University of Technology and Economics. |
| 11:50 | del Fresno Zarza, J., and Naets, F., 'Mechanically structured second-order modal identification of a full-scale F-16 aircraft and transformation to classical modal parameters', KU Leuven. |
SD5 - Wednesday 9 Sep 2026
| 13:35 | Pereira, L., Cordioli, J., Avallone, F., and Hülse, E., 'Numerical Analysis of Aeronautical Structure Response to Propeller Slipstream Impingement', LVA/UFSC. |
| 14:00 | Facchini, S., De Carolis, S., Messina, A., and Soria, L., 'Response-Based Frequency Response Functions for Local Modal Identification and Damage Detection', Politecnico di Bari. |
| 14:25 | Caselli, L., Gryllias, K., Rivola, A., and Troncossi, M., 'Modal Interaction in Slender Rotors with Intermediate Constraints', University of Bologna. |
| 14:50 | Antill, D., Barretto, J. R., Talbot, J. P., Cocking, S., and Fidler, P. R. A., 'Saving the Great London Plane of Ely: Engineering support for an ancient tree', University of Cambridge. |
| 15:15 | Hunt, H., 'A procedure for safe operation of HAPS: a good application of modal analysis and dimensional analysis', University of Cambridge. |
| 15:40 | Castellani, F., Zanetti, E. M., Carboni Marri, G., Rebora, M., and Salerno, G., 'Vibro-acoustic analysis of wood boring insects’ larvae activity', University of Perugia. |
Structural health monitoring (Structures)
SHM1 - Monday 7 Sep 2026
| 13:25 | Huo, H., He, J., and Guan, X., 'A Bayesian Fusion Framework for Lamb Wave Damage Localization in Composite Plates', Beihang University. |
| 13:50 | Lindström, F., Nord, A., Sjögren, A., Wirje, A., Frisk, E., and Jung, D., 'Vibration-based Fault Diagnosis of Automotive Structures Using Local Rational Models', Volvo Cars & Linköping University. |
| 14:15 | Xie, K., and Cheng, L., 'Structural Vibrational Analysis via Directional Mode Shapes (DMS) and Synthetic Mode Shapes (SMS) Informed by 2D Hilbert Transform and Angular Steerable Filters', University of Groningen. |
| 14:40 | Kullaa, J., 'Subspace-Based Damage Detection Without Harmonic Removal: A Covariance Function Framework', Metropolia University of Applied Sciences. |
| 15:05 | Gkliati, E., Spiliotopoulos, P., and Fassois, S., 'Random vibration data-based bolt-loosening damage robust diagnosis for a scale aircraft stabilizer structure under uncertainty: Acceleration versus strain sensors', University of Patras. |
| 15:30 | Dardeno, T. A., Hughes, A. J., Bull, L. A., Dervilis, N., and Worden, K., 'Optimising intermediate structures for heterogeneous transfer', The University of Sheffield. |
SHM2 - Monday 7 Sep 2026
| 16:20 | Kritikakos, K., Fassois, S., and Sakellariou, J., 'Acceleration data-based robust on-board monitoring of hunting proximity on railway vehicles under uncertainty: A feasibility study', University of Patras. |
| 16:45 | Papatheou, E., Agathos, K., and Worden, K., 'On sensor placement optimisation for population based structural health monitoring', University of Exeter. |
| 17:10 | Georgantopoulou, A., and Tcherniak, D., 'A data-flow architecture for automated structural damage detection under environmental and population uncertainty', Independent Researcher. |
| 17:35 | Maes, K., Anastasopoulos, D., Van de Velde, M., Nord, T. S., and Reynders, E. P. B., 'Identification of vessel docking forces on ferry quays', KU Leuven. |
| 18:00 | Champneys, M., Rogers, T., Cross, E., and Worden, K., 'Towards Bayesian projection-based removal of EOVs for population-based structural health monitoring', University of Sheffield. |
SHM3 - Wednesday 9 Sep 2026
| 10:10 | Dwek, N., Kirchner, M., Deckers, E., and Naets, F., 'Damage Localization using Modal Testing Measurements and Scatterer Imaging: an Almost Real-World Example', KU Leuven. |
| 10:35 | Worden, K., Hughes, A., and Tsialiamanis, G., 'On the topology and geometry of population-based SHM: Part II, Sheaves on graphs', University of Sheffield. |
| 11:00 | Passadore, C., Chakroun, A. E., Cristofori, G., and Mucchi, E., 'Condition monitoring of pharmaceutical machinery: A localized vibration-based approach for lack of lubrication detection', University of Ferrara. |
| 11:25 | Oestereich, G. H., Fuga, F. R., and De Medeiros, R., 'Parametric optimization of piezoelectric sensor geometry for damage monitoring in CFRP composite beams', Santa Catarina State University - UDESC. |
| 11:50 | Bakhshi, A., and Shamsi, M., 'Hybrid Physics-Informed Neural Networks Integrating Finite Element and Sensor Data for Structural Health Monitoring and Digital Twin Development', Sharif University of Technology. |
SHM4 - Wednesday 9 Sep 2026
| 13:35 | Wu, H., Agathos, K., and Papatheou, E., 'On the use of virtual sensing for population-based SHM', University of Exeter. |
| 14:00 | Mclean, J., Turner, J., and Cross, L., 'Physically Informed Gaussian Process Classification', University of Sheffield. |
| 14:25 | Li, P., Lu, H., Gryllias, K., and Chronopoulos, D., 'Uncertainty-aware corrosion prognosis via adaptive attention Transformer and multi-distribution fusion', KU Leuven. |
| 14:50 | Naghizadeh, E., Chatzi, E., and Tiso, P., 'Experimental Verification of Breathing Crack Identification Using Higher-Order Transmissibility', ETH Zurich. |
| 15:15 | Annamalaisamy Sannasiraj, R. D., Zhang, L., and Chronopoulos, D., 'Damage assessment of Non-Uniformly Corroded Reinforced Concrete structures using Ultrasonic wave propagation', KU Leuven. |
Substructuring and Coupling
SC1 - Tuesday 8 Sep 2026
| 08:30 | Zobel, O. M., Schnabel, T., and Rixen, D. J., 'Dynamic Substructuring of an Acoustic Guitar: An Application Example of Frequency-Based Substructuring', TUM Chair of Applied Mechanics. |
| 08:55 | Baqir, M. F., and Kim, J.-G., 'Data-Driven Dynamic Substructuring for Hybrid Physics–Data Modelling Through Interface Learning', Kyung Hee University. |
| 09:20 | Piton, V. J. R., Ege, K., Le Carrou, J.-L., and Leclère, Q., 'Dynamical substructuring of an acoustic guitar integrating the bridge-soundboard coupling', LVA - INSA Lyon. |
SC2 - Wednesday 9 Sep 2026
| 08:55 | Marx, T., Degenfeld-Schonburg, P., Weig, E. M., and Pfingstl, S., 'An Enhanced Hurty/Craig–Bampton Method for Frequency Response Analysis', Robert Bosch GmbH. |
| 09:20 | Hoseyni, S. M., Hargreaves, J., Meggitt, J. W. R., King, M., Richter, M., and Tanner, G., 'Hybrid modelling of structural intensity in complex built-up assemblies – Part I: an experimental–finite element approach', University of Salford. |
| 09:45 | Spijkerman, B., van der Aa, B., and Wijnant, Y., 'Frequency dependent internal mode selection for acoustic substructuring', University of Twente. |
| 10:10 | Ialonardi, M., Brunetti, J., D'Ambrogio, W., and Fregolent, A., 'Converging to a Single Optimal Solution from Multiple Configuration-dependent FBS Decoupling Results', Università degli studi di Roma La Sapienza. |
SC3 - Wednesday 9 Sep 2026
| 10:35 | Ocepek, D., Trainotti, F., Korbar, J., and Čepon, G., 'Practical Considerations for Sparsity-Promoting Interface Reduction in Frequency-Based Substructuring', University of Ljubljana. |
| 11:00 | Moldenhauer, B., Roettgen, D., and Misla, A., 'Using Dynamic Substructuring for Mechanical Modification of a Structure with Operational Response Data', Sandia National Laboratories. |
| 11:25 | Jackson, M., Moldenhauer, B., Roettgen, D., and Davis, B., 'A Bayesian Framework for Compliant Interface Characterization in Inverse Substructuring', University of Georgia/Sandia National Laboratories. |
| 11:50 | Vaca Lago, J. P., and Zucchini, A., 'On the performance evaluation of Reduced Order Models with Frequency Based Substructuring approaches for structural dynamics evaluation inside of an automotive industrial application', TUM / BMW. |
Transfer path analysis
TPA1 - Tuesday 8 Sep 2026
| 16:05 | Zobel, O. M., Ocepek, D., Čepon, G., and Rixen, D. J., 'An Impulse Response Function Based Method for Experimental Time Domain Transfer Path Analysis', TUM Chair of Applied Mechanics. |
| 16:30 | Carter, S., 'Endeavoring to Understand Non-causal Behavior in Transient Source Estimation Problems', Sandia National Laboratories. |
| 16:55 | Soleri, A., Brunetti, J., D'Ambrogio, W., and Fregolent, A., 'Determining the Number of Pseudo Forces in Component-Based TPA', Università degli studi di Roma La Sapienza. |
| 17:20 | Antonelli, M. G. E., Berardi, R., Brunetti, J., D'Addabbo, A., D'Ambrogio, W., and D'Eramo, S., 'Transfer Path Analysis of Vibration Transmission in Cryogenic Pulse-Tube Systems: Application to the CUPID Thermal-Coupling Design', Istituto Nazionale di Fisica Nucleare (INFN). |
| 17:45 | AN, B., and LEE, J., 'Analysis of solid and fluid path contributions to radiated noise in a power transformer mock-up', HD Hyundai Electirc. |
TPA2 - Wednesday 9 Sep 2026
| 13:35 | Shen, W., Creixell-Mediante, E., Lucklum, F., and Brunskog, J., 'Causal Inference-Based Identification of Vibroacoustic Transfer Paths', Technical University of Denmark. |
| 14:00 | Meggitt, J. W. R., and McGee, R., 'An output-only interface completeness metric based on generalized transmissibility', University of Salford. |
| 14:25 | Ferraro, G., Di Marcoberardino, S., Galerati, A., Tarabra, M., and Mucchi, E., 'Challenges and robustness of transfer path analysis for indirect force identification in agricultural machinery', University Of Modena and Reggio Emilia. |
| 14:50 | Wienen, K., Sturm, M., Zabel, D., and Alber, T., 'Automated Transfer Path Analysis for industrial-scale blocked force source characterization', Robert Bosch. |
| 15:15 | Sorber, E., Brandstetter, M., Wienen, K., and Sturm, M., 'Automated blocked force characterization for contextually realistic auralization of component variants in virtual vehicle prototypes', Siemens Digital Industries Software. |
| 15:40 | Nagarajan, S. R., and Palanivelu, S., 'Prediction and assessment of human body vibration and noise perception using conventional and operational transfer path analysis framework', Vellore Institute of Technology Vellore. |
Tuned Vibration Absorbers and Dampers
TVD1 - Wednesday 9 Sep 2026
| 08:30 | Trachsel, M., 'Dual TMD on electric machine of an elevator', Schindler. |
| 08:55 | Jayatilake, S., Cooper, J., and Titurus, B., 'Dynamically tuned embedded plate dampers for vibration suppression in sandwich panels', University of Bristol. |
| 09:20 | Östling, D., and Ottesen, E., 'Whirling dynamics of rotating damped metal cutting tools', Sandvik Coromant. |
| 09:45 | He, H., Zhang, J., Huang, L., and Song, Z., 'Topology design of inerter-based vibration isolators for frequency-dependent negative stiffness characteristics', Harbin Engineering University. |
TVD2 - Wednesday 9 Sep 2026
| 13:35 | De Carvalho Almeida, A., Rustighi, E., Paupitz Gonçalves, P. J., Brennan, M. J., and Cavenaghi Campos, B., 'Nonlinear Magnetically Tuned Vibration Neutralizers Based on an Orthoplanar Spring', São Paulo State University, School of Engineering. |
| 14:00 | Gibus, D., Larhlid, O., Guerine, A., and Badel, A., 'Frequency tuning capability of self-powered piezoelectric tuned mass dampers', Laboratoire SYMME. |
| 14:25 | Dall'Olio, F., Manconi, E., and Renno, J., 'Design of Tunable Mechanical Filters Using Folded Beams with Local Resonators: Band-Gap Optimisation Under Force, Mass and Energy Constraints', University of Parma. |
| 14:50 | Saffury, J., Mazor, A. 'Integrally formed pre-tuned mass dampers for chatter suppression of turning tools', Iscar Ltd. |
| 15:15 | Alujević, N., Arandia Krešić, S., Vučković, K., and Zhang, Z., 'Stroke saturation prevention in active mass inerter dampers', University of Zagreb. |
| 15:40 | Hemmasi, M., Loghmani, A., Zahabi, S. J., and Noh, Y., 'Remaining Useful Life Estimation of Bearings Using a Physics-Informed Deep Learning Approach', IUT-PNU. |
USD - Uncertainty Identification and Quantification
USDUIQ1 - Tuesday 8 Sep 2026
| 14:00 | Thijssen, R. E. W. L., Fey, R. H. B., Dolk, V. S., Hazeleger, L., and van de Wouw, N., 'Component-to-assembly propagation of damping modeling uncertainty via robust performance analysis', Eindhoven University of Technology. |
| 14:25 | Thelemann, S., Schatz, M., and Duddeck, F., 'Composite Strength Analyses Under Random Loading', Airbus Defence and Space GmbH | TUM. |
| 14:50 | Kamper-Schley, T., Brücher, H., Krein, S., and Wegerhoff, M., 'Coping with uncertainties in experimental modal analysis', HEAD acoustics GmbH. |
| 15:15 | McNulty, M., and Meggitt, J. W., 'Bayesian identification of joint dynamics', University of Salford. |
USDUIQ2 - Tuesday 8 Sep 2026
| 16:05 | Whittle, G., Barton, L., W. R. Meggitt, J., Yap, E., Hamill, M., and Toyer, D., 'Monte-Carlo analysis of operator uncertainty in blocked force estimation', University of Salford. |
| 16:30 | Aditanoyo, T., Brunskog, J., Barrera Figueroa, S., and Lucklum, F., 'Measurement Uncertainty Evaluation of a Vibroacoustic Measurement Method Using a Closed Cylindrical Shell', Technical University of Denmark (DTU),. |
| 16:55 | Hickey, J., and Brewick, P., 'Quantifying Uncertainties in Damping Estimates from Operational Modal Analysis using Multiple Vibration Datasets', Trinity College Dublin. |
| 17:20 | Ahamed, S. S., Ali, S. F., and Arockiarajan, A., 'Uncertainty propagation and identifiability in sequential parameter estimation for structural digital twins', Indian Institute of Technology Madras. |
| 17:45 | Longbottom, J., Balmus, M., Clayton, R., Frost, F., Niederer, S., Rothman, A., Saxton, H., Wilkinson, R., Rogers, T., and Worden, K., 'Nonlinear System Identification of Time-Varying Parameters for Condition Monitoring of the Heart using Sequential Monte Carlo', The University of Sheffield. |
USD – Applications
USDA - Monday 7 Sep 2026
| 13:25 | Segel, N. F., Linder, H. D., and Krack, M., 'Response of a Bolted Structure to Uncertain Contact Topography and Misalignment', Universität Stuttgart. |
| 13:50 | Azouz, L., Claeys, M., Poette, G., and Breil, J., 'Effects of manufacturing dispersions on the stiffness and strength of a metal structural part', CEA. |
| 14:15 | Depaola, M., De Gregoriis, D., Bornoff, R., Vandevelde, B., and Moens, D., 'Robust Optimal Sensor Placement for Thermal Virtual Sensing in electronic systems', IMEC/SISW. |
| 14:40 | Klinger, N., and Cicirello, A., 'Experimental investigations of manufacturing variability of locally resonant metamaterials', University of Cambridge. |
| 15:05 | Rousou, K., Panagiotopoulos, D., Chronopoulos, D., and Deckers, E., 'Statistically Enhanced Model-Based TR-MUSIC for Sound Source Localization in Reverberant Cavities with High Model Uncertainty', Mecha(tro)nic System Dynamics (LMSD). |
USD – Methods
USDM1 - Monday 7 Sep 2026
| 15:55 | Choi, J., Han, S., and Kim, J.-G., 'FBS-based Multi-level PCE Modeling for Uncertainty Quantification of Frequency Response Function', Kyung Hee University. |
| 16:20 | Wang, T., and Bi, S., 'Stochastic Model Updating for Structural Systems via Conditional Flow Matching', University of Southampton. |
| 16:45 | Büsing, A., Eßling, R., Bollhöfer, M., and Römer, U., 'Surrogate-Based Uncertainty Quantification for Large-Scale Vibroacoustics', TU Braunschweig. |
| 17:10 | Ezvan, O., Desceliers, C., Soize, C., and Capiez-Lernout, E., 'Neural Network Hyperreduction for Parameterized Reduced Models in Nonlinear Stochastic Dynamics', Université Gustave Eiffel. |
| 17:35 | Schnappinger, T., and Duddeck, F., 'Assessing Reduced-Order Representations of Geometric Mistuning for Uncertainty Quantification in Blisks', Technical University of Munich. |
USDM2 - Wednesday 9 Sep 2026
| 08:30 | Eßling, R., and Römer, U., 'Sparse Rational Multilevel Approximation for Parametric Frequency-Domain Problems', TU Braunschweig. |
| 08:55 | Lindley, C. A., and Worden, K., 'On Bayesian tree-adjoining grammars for neural-network system identification', University of Sheffield. |
| 09:20 | Trapp, A., Schneider, K., Wolfsteiner, P., and Rother, K., 'Challenging the Papoulis Rule: A Large-Scale Analysis of Kurtosis Transmission in Linear Systems under Real-World Vibration Loads', Siemens Mobility GmbH. |
USDM3 - Wednesday 9 Sep 2026
| 10:10 | Song, Z., Dang, C., Valdebenito, M. A., and Faes, M. G. R., 'An active learning function-on-function nonlinear autoregressive model for evaluating small first-passage probabilities of stochastic structural dynamical systems', TU Dortmund University. |
| 10:35 | Misraji, M., Valdebenito, M., Papadimitriou, C., and Faes, M., 'Importance Line Sampling: A Method for First Excursion Probability and Sensitivity Estimation in Linear Systems under Gaussian Loading', TU Dortmund University. |
| 11:00 | Böswald, M., Tang, M., Volkmar, R., and Soal, K., 'Systematic determination of bias and scatter in different experimental modal analysis methods', DLR - German Aerospace Center. |
| 11:25 | Jian, J., Antoni, J., and Gryllias, K., 'Spectral density-based Bayesian OMA exploiting Gibbs sampling', KU Leuven. |
Vamor
VAMOR - Monday 7 Sep 2026
| 15:30 | Yao, J., Panagiotopoulos, D., Marburg, S., and Deckers, E., 'Learnable Scaling Operator in Physics-Informed Machine Learning for Vibro-acoustic Simulations', KU Leuven. |
| 15:55 | Pan, B., Gaborit, M., Dazel, O., and Groby, J.-P., 'Normal mode decomposition–based inverse identification of metaporous structures in a multimodal waveguide', Laboratoire d'Acoustique de l'Université du Mans (LAUM). |
| 16:20 | Marburg, K., Kleine-Wächter, L., Mao, H., Gaborit, M., Groby, J.-P., Dazel, O., and Rumpler, R., 'Rotational and Longitudinal Waves in 1D Non-Local Phononic Crystals', KTH Royal Institute of Technology. |
| 16:45 | Mariotti, P., Mao, H., and Rumpler, R., 'Comparison of Model Order Reduction Techniques for Exterior Acoustic Problems with Absorbing Boundary Condition', KTH Royal Institute of Technology. |
| 17:10 | Cutanda Henriquez, V., 'Boundary Element Method with a Simplified Implementation of Acoustic Visco-Thermal Losses', Technical University of Denmark. |
| 17:35 | Hinz, M., Panagiotopoulos, D., Deckers, E., and Müller, G., 'Vibro-Acoustic Ensemble Response Using Low-Rank Parametric Model Order Reduction', Technische Universität München. |
| 18:00 | Sales, D., Preuss, S., Panagiotopoulos, D., Deckers, E., Cutanda Henriquez, V., and Marburg, S., 'Comparison of Model Order Reduction Techniques for Multi-Frequency Viscothermal Acoustic Boundary Element Method', Technical University of Munich. |
Vehicle noise and vibration
NVH1 - Monday 7 Sep 2026
| 13:25 | Lelkes, J., Horváth, D. A., Ács, D., and Gazdagh, Z. G., 'Sparse Identification of Excitation Mechanisms in Automotive NVH', Robert Bosch Kft.. |
| 13:50 | Cristofori, G., Battarra, M., Mucchi, E., and Dalpiaz, G., 'Influence of geometrical and operational parameters on the NVH behaviour of worm gear drives', University of Ferrara. |
| 14:15 | Söderqvist, A., Martinelli, C., Worral, K., Falcone, G., and Cammarano, A., 'Adaptive Control of an Energy Harvesting Electromagnetic Damper Using a DC-DC Converter: Quarter-Car Experimental Validation', University of Glasgow. |
| 14:40 | Schneider, S., and Bernd, G., 'Time-Dependent Modal Acoustic Transfer Vectors for Efficient Numerical NVH Analysis', Ulm University of Applied Sciences. |
NVH2 - Wednesday 9 Sep 2026
| 08:30 | Mochizuki, S., Matsumura, Y., and Kido, I., 'A design method for reducing panel-radiated noise from frame-panel structures by controlling transmitted forces at the interface based on analysis using frequency-based substructuring with reduced degrees of freedom', Gifu University / SUZUKI MOTOR CORPORATION. |
| 08:55 | Flament, P., Lossouarn, B., Ramond, E., Audrain, P., and Deü, J.-F., 'A generalized passive topology for multimodal vibration control using interconnected piezoelectric networks', Naval Group. |
| 09:20 | Carlino, D., Ciceo, S., and Chauvicourt, F., 'E-Drive time-domain vibration model for virtual sensors applications', Siemens Digital Industry Software. |
NVH3 - Wednesday 9 Sep 2026
| 13:35 | Harry, E., and Cristofano, A., 'The Use of Virtual Source Morphing During the Early Design Phases of Automotive Development', Adler Pelzer Group. |
| 14:00 | Bašić, M., Parente, A., D’Alessandro, V., and Spanu, G., 'Powertrain Vibro-acoustic Methodology Consolidation', AVL. |
| 14:25 | Khamis, M., Salamone, N., Bianciardi, F., Luciano, L., Repecho, V., and Cerezo, A. C., 'Estimation of Transfer Functions for Fast NVH Simulation of Electric Motor Drives and Enhanced Control of Low-Frequency Vibration', Universitat Politècnica de Catalunya. |
| 14:50 | Khan, Z. A., Dolatabadi, N., and Rahmani, R., 'Wide-band Frequency Dynamic Assessment of Filled Elastomers for Vibration Isolation', Loughborough University. |
| 15:15 | Tong, S., Brughmans, M., Hense, A., Ciceo, S., and Geluk, T., 'Toward Robust 3D Mode Shape Recognition: An Explainable and Transferable AI Framework', Siemens Digital Industries Software. |
| 15:40 | Erspamer, A., Mylonas, D., Yiakopoulos, C., Vossou, C., Antoniadis, I., and Koulocheris, D., 'Design of Robust Dual Sound Zones for Driver and Passenger with Rear-Seat Spillover Control', National Technical University of Athens. |
Vibro-acoustic modelling and prediction
VAM1 - Tuesday 8 Sep 2026
| 08:30 | Ortoleva, J., Barnard, A., and Taggart, A., 'Soundscapes of ancient Etruria: the unique soundscape of the pre-Roman ritual site, Lago degli Idoli, Italy', University of Oxford. |
| 08:55 | Lee, J., Le, C. H., Cho, S., and Kim, J.-G., 'A Study on Radiated Noise of a Permanent Magnet Synchronous Motor Generated by Electromagnetic Forces Using the Coupled FEM–BEM Framework', Kyung Hee University. |
| 09:20 | XIE, X., and JIN, G., 'An automatic frequency-independent perfectly matched layer for exterior acoustics', Harbin Engineering University. |
| 09:45 | Vallely, S., Schoenwald, S., Giannini, D., and Reynders, E., 'Characterisation of an acoustic black hole inspired treatment for vibration attenuation in cross-laminated timber panels', KU Leuven. |
VAM2 - Tuesday 8 Sep 2026
| 10:35 | Hüpel, Y., Hoffmann, S., and Langer, S. C., 'Simulative comparison of TBL induced cabin noise between a battery electric short-range and hydrogen driven mid-range aircraft', TU Braunschweig. |
| 11:00 | Giannini, D., Van Belle, L., Deckers, E., and Reynders, E. P. B., 'Equivalent thin-plate modelling of finite, moderately thick metamaterial panels for airborne and impact sound transmission analysis', KU Leuven. |
| 11:25 | Diez, I., and Guiral, A., 'Simulation of Interior Noise Generated by HVAC Systems in Railway Vehicles', CAF I+D. |
| 11:50 | Kvist, K., and Sorokin, S., 'Spherical Transfer Matrix method for acoustic noise prediction from internally pressure loaded structures', Aalborg University. |
VAM3 - Tuesday 8 Sep 2026
| 13:35 | Kovalevsky, L., Serre, G., and Dumortier, F., 'Representative test case for submarine’s acoustic target strength simulation', Dassault Systemes. |
| 14:00 | Li, J., Lucklum, F., and Cutanda Henriquez, V., 'A Continuously Tunable Piston–Slit Helmholtz Resonator for Low-Frequency Absorption', Technical University of Denmark. |
| 14:25 | Whittle, G., Meggitt, J., and Hargreaves, J., 'Advanced methods for the estimation of radiated sound power', University of Salford. |
| 14:50 | Thevenot, R., Puel, G., Barbarulo, A., and Dec, P., 'Hybrid VTCR/FEM simulation method for the design of acoustic metamaterials', SNCF-LMPS. |
| 15:15 | Farooq, Z., François, S., and Degrande, G., 'Low-rank representation of elastodynamic Green’s functions for boundary element analysis', KU Lueven. |
VAM4 - Tuesday 8 Sep 2026
| 16:05 | Sahana, S., Samal, B. B., Dwivedi, A., and Bhattacharya, B., 'Elastic wave attenuation and impact mitigation in Bouligand-auxetic metastructures', Indian Institute of Technology Kanpur. |
| 16:30 | Wurzinger, A., Klanner, M., Deckers, E., and Huybrechs, D., 'Comparison of Time-Domain Formulations in Trefftz Methods for Transient Vibroacoustic Problems', University of Technology Graz. |
| 16:55 | Wijnant, Y., 'A local two-wave decomposition for solutions of the Helmholtz equation', University of Twente. |
| 17:20 | Dong, L., Denayer, H., and Deckers, E., 'Multi-rate vision–accelerometer Kalman filtering for structural response estimation using a reduced finite-element model', KU Leuven. |
Wind turbine dynamics special session
SDWT1 - Tuesday 8 Sep 2026
| 10:35 | Kumar, A., Dervilis, N., and Manson, G., 'Spatially Informed Graph Neural Networks with CVAE for Multi-Sensor-Based Anomaly Detection', University of Sheffield. |
| 11:00 | Donadio, L., Pimenta, F., and Magalhães, F., 'Preliminary validation of Symbolic Reduced Order Model for Onshore Wind Turbines', University of Porto. |
| 11:25 | Delette, N., Denimal Goy, E., Pfister, J.-L., El Amri, M. R., and Mevel, L., 'Model updating of operating wind turbine blades: A case study on the NREL 5-MW model', IFPEN. |
| 11:50 | Bassalti, A., Vettori, S., Di Lorenzo, E., Chatzi, E., and Magalhães, F., 'Operational Modal Analysis and Vibration-Based Assessment of Wind Turbine Blades during Operation', Siemens Digital Industries Software. |
SDWT2 - Tuesday 8 Sep 2026
| 13:35 | Castellani, F., Astolfi, D., Abdemeziane, M. R., Rachedi, M. F., and Rinaldi, S., 'Wind turbine fault Detection and structural monitoring through Signal-to-Image Encodings and Deep Learning Approaches', University of Perugia. |
| 14:00 | Severa, L., Milana, S., Burato, D., Vettori, S., and Culla, A., 'A data-driven damage detection approach for wind turbines using wavelet features and graph representation', Sapienza university of Rome. |
| 14:25 | Kalathiparambil Kennedy, L., Duthé, G., Arcieri, G., and Chatzi, E., 'Topology-Aware Gaussian Processes over Graphs for Power and Load Inference in Wind Farms Under Uncertainty', ETH Zürich. |
| 14:50 | Kazemi, M. H., Toftekær, J. F., Sørensen, J. D., Jepsen, M. S., and Tygesen, U., 'Advancing Offshore Wind Support Structure Reassessment by Moving From Deterministic to Data-Driven Probabilistic Assessment', Vattenfall. |
| 15:15 | Feldmann, R., Meding, F., and Melz, T., 'Audio Signal-Based Delamination Detection for Wind Turbine Rotor Blades Using an Autoencoder', TU Darmstadt. |
Poster
POS1 - Monday 7 Sep 2026
| 13:25 | Riedel, S., Kapelke, S., and Fidlin, A., 'On damage detection and lifetime of piezoelectric multilayer actuators', Physik Instrumente (PI) SE & Co. KG. |
| 13:25 | Uchendu, N., and Rustighi, E., 'Seismic-camera imaging for water leak localisation: field-test results', University of Trento. |
| 13:25 | Yuan, H., Wang, J., He, G., Zhao, Y., and Liu, K., 'Study on Distant Retrograde Orbits and Bifurcations of Solar Sail at Earth-Moon Libration Points', National University of Defense Technology. |
| 13:25 | Ghanbari, N., GhandchiTehrani, M., and Dirksz, D., 'Modelling Hand-Transmitted Vibration and Discomfort in a Hand-Held Consumer Product Using Linearised Hand–Object Dynamics', University of Groningen. |
| 13:25 | Hajalfadul, M., Muggleton, J., and Joseph, P., 'Riser-Hydrant Dynamics for Acoustic Leak Detection in Water pipes', University of Southampton. |
| 13:25 | Reumers, P., Maes, K., Schmid, M., Rissmann, M., Bouvet, P., and Degrande, G., 'Ground vibration measurements on the mainline Luzern-Olten', KU Leuven. |
| 13:25 | Diez, I., Biteri, I. G., Gutierrez, I., and Guiral, A., 'Predicting Installed Train Horn Noise with BEM', CAF I+D. |
| 13:25 | Moczko, P., Mądry, M., Sbriglio, C., Szczupak, B., Więckowski, J., Lies, C., Löpitz, D., Konarzewski, M., Panowicz, R., Osiecki, T., and Seidlitz, H., 'Integration of fibre optic sensors in the pultrusion Process: Diagnostic Possibilities in composites', Wroclaw University of Science and Technology. |
| 13:25 | Paik, S., Chaudhari, V. V., Raghuvanshi, J., and V, R., 'Investigation on Road-Induced Booming Noise of an Electric Vehicle: Analysis and Refinement', Mahindra & Mahindra Ltd.. |
| 13:25 | Junaid-U-Rehman, M., Kudra, G., Polczyński, K., Dekemele, K., Loccufier, M., and Awrejcewicz, J., 'Nonlinear Dynamics of Parametric Excitation and Friction-Induced Self-Excitation in a One-Degree-Of-Freedom Mechanical System', Lodz University of Technology. |
| 13:25 | Thau, A., and Hübler, C., 'Development of a Procedure for Model Updating with an unknown Number of Damage Positions based on the Example of a Single-Span Beam', TU Darmstadt. |
| 13:25 | Battista, G., Cerruti, M., and Vanali, M., 'DEVELOPMENT OF VIBRATION-BASED CONDITION MONITORING APPROACH FOR ELEVATOR DOORS', University of Parma. |
| 13:25 | Eidinejad, H., Rivola, A., Troncossi, M., and Martini, A., 'Experimental assessment of the performance of a battery pack for electric powertrains undergoing real-world vibration profiles', Alma Mater Studiorum - University of Bologna. |
| 13:25 | Pani, S. D., and Modak, S. V., 'Study of Virtual sound barriers for reducing environmental noise transmission into a room', Indian Institute Of Technology, Delhi, Hauz Khas,110016,New Delhi, India. |
| 13:25 | Hemati, A., and Shooshtari, A., 'Modelling the Pitting Faults in Planetary Gearboxes and Diagnosing it using Vibratory Signal Analysis and Various Machine Learning Methods', Bu-Ali Sina University. |
| 13:25 | Sayyad khodashenas, N., 'Linear effects of termination conditions in two-port measurements of the acoustic response of perforated plates', KTH. |
| 13:25 | Nastac, S. M., Stanciu, M. D., and Guiman, M. V., 'Assessments on modal identification and acoustic characterization of tone-woods for violin resonant structures', Dunarea de Jos University of Galati. |
| 13:25 | Zhang, H., Chatterton, S., Zhang, K., Lu, K., and Pennacchi, P., 'Experimental study on fault-induced vibrations in twin-spool rotors: the effect of speed ratios', Politecnico di Milano. |
POS2 - Tuesday 8 Sep 2026
| 08:30 | Sampathirao, R. C. M., Rouleau, L., Laurent, L., Mao, H., Deü, J.-F., and Rumpler, R., 'Investigation of performance and assumptions of various homogenisation methods for visco-elastic honeycomb sandwiches', CNAM (Conservatoire national des arts et métiers). |
| 08:30 | Akasaka, S., Hirabayashi, W., and Asai, S., 'Mechanical Property Evaluation of Soft Materials Using a Sezawa-Wave-Based Dispersion Method', Institute of Science Tokyo. |
| 08:30 | Sreekumar, A., Henrique Marra da Silva Ribeiro, L., and Chronopoulos, D., 'Topological Elastic Waveguides for Structural Health Monitoring: Robustness and Variability Effects', KU Leuven. |
| 08:30 | Mao, H., Wang, R., Yin, B., Rumpler, R., and Tibert, G., 'Sensory-Aware Soft Bio-Metamaterials for Vibro-Tactile Optimization in Prosthetic Feet', KTH Royal Institute of Technology. |
| 08:30 | Yennepally, R. R., Gaborit, M., Denayer, H., Deckers, E., Groby, J.-P., and Dazel, O., 'Matched dispersion relation approach for homogenization of complex structures: Application to a ladder structure', Le Mans University. |
| 08:30 | Zhang, X., Sheng, C., Ouyang, W., and Gryllias, K., 'Online Wear Monitoring of Water-Lubricated Journal Bearings Based on Ultrasonic Echo Parameter Estimation', KU Leuven. |
| 08:30 | Arefi, A., Barman, S. K., and Chronopoulos, D., 'Statistically Informed Time-Window Selection for TCN-Based Guided-Wave Damage Identification', KU Leuven. |
| 08:30 | Lu, H., Korsimaa, J., Iablonskyi, D., Chronopoulos, D., Salminen, P., Niiranen, J., and Gryllias, K., 'Wireless ultrasonic damage identification in high-temperature pipelines via semi-supervised multi-task transfer learning', KU LEUVEN. |
| 08:30 | Minervini, D., Raia, M. R., and Gorgoretti, D., 'Data-Driven Mount Stiffness Characterization: AI Framework Combining Test and Simulation for Electric Powertrains', Siemens Digital Industries Software. |
| 08:30 | Kılıçarslan, D., Panagiotopoulos, D., and Deckers, E., 'The Shifted Boundary Method for Acoustic Eigenvalue Problems : Evaluation of Different Boundary Selection Algorithms', KU Leuven. |
| 08:30 | Usmanov, U., Firrone, C. M., and Battiato, G., 'Generative Machine Learning–Based Identification of Blade–Disk Contact Mistuning', Polytechnic University of Turin. |
| 08:30 | Danieli, D., Kunte, D., Colangeli, C., Cornelis, B., and Mundo, D., 'AI-Driven NVH Fault Detection and Severity Assessment Using Multi-Task Learning on Sparse and Imbalanced Data', Universita della Calabria. |
| 08:30 | Cavagna, F., Kosova, G., Di Lorenzo, E., and Dozio, L., 'Methodologies for Fixed-Base Modal Analysis Derived from Shaker Table Testing', Siemens Digital Industries Software. |
| 08:30 | Val Quintans Kulakauskas, L., Aage, N., Panagiotopoulos, D., Deckers, E., and Cutanda Henriquez, V., 'MOR Technique for Coupled FEM-BEM for vibro-acoustic radiation problems', Technical University of Denmark. |
| 08:30 | Rodriguez-Leon, D., Palomares, E., Morales, A. L., Nieto, A. J., and Pintado, P., 'A new stochastic comfort metric for railway vehicles independent of measurement location', Universidad de Castilla-La Mancha. |
| 08:30 | Acs, D., Gazdagh, Z. G., and Vehovszky, B., 'Influence of Sweep-Rate during Fatigue Endurance Testing Near Lightly Damped Resonances', Robert Bosch Kft.. |
| 08:30 | Lannoye, M., Giannini, D., Deckers, E., and Reynders, E. P. B., 'Acoustic metamaterials for sound transmission loss enhancement in compact wall linings', KU Leuven. |
| 08:30 | Salagas, S., Panagiotopoulos, D., Deckers, E., and Gryllias, K., 'Physics-Enhanced Neural Networks for Coupled Vibroacoustic Modeling of Thin Plates with Defects', KU Leuven. |
| 08:30 | Jiang, J., and Xiong, Y., 'A New Dynamic Topology Optimization Framework Using Genetic Algorithm for Arbitrarily Shaped Structures and Manufacturable Design', University of Southampton. |
| 08:30 | Lozano-Rodriguez, H. D., Abundis-Fong, H. F., Trujillo-Franco, L. G., and Beltran-Carbajal, F., 'Active vibration suppression in flexible structures using a nonlinear rotational actuator', Tecnologico Nacional de Mexico/I.T. de Pachuca. |
| 08:30 | de Wit, F., Deckers, E., Huybrechs, D., and Klanner, M., 'Analysis of the convergence of the Wave Based Method for 2D interior acoustic problems', KU Leuven. |
| 08:30 | Neri, P., Cesaretti, A., D'Alessio, V., Firrone, C. M., and Botto, D., 'Image Unwrapping for Tracking Rotating Objects with DIC', Politecnico di Torino. |
| 08:30 | Leichtweis dos Santos, L., and A. Cordioli, J., 'Lubrication Condition Monitoring in Rolling Bearings Using Acoustic Emission and Vibration Signals: A New Dataset and Exploratory Study', Laboratório de Vobrações e Acústica. |
| 08:30 | Kurniawan, D., 'Automotive HVAC Acoustics: Impact of Test Location Altitude on Sub-assembly Validation Results', Valeo Power. |
POS3 - Tuesday 8 Sep 2026
| 13:35 | Hughes, A., Poole, J., Dervilis, N., and Worden, K., 'On the value of environmental variability for domain adaptation in PBSHM', University of Sheffield. |
| 13:35 | Constantin, L., Feștilă, F., and Roșu, P.-V., 'Phase-locked loop controlled testing of a nonlinear sloshing system', Military Technical Academy Ferdinand I. |
| 13:35 | Mashayekhi, F., Zucca, S., and Firrone, C. M., 'Sensitivity Analysis of the Transient Dynamic Response of a Sprag Clutch', Politecnico di Torino. |
| 13:35 | Bakhshi, A., and Ghanbari, Z., 'Vibration-Based Damage Identification in Bolted Semi-Rigid Steel Connections Using Deep Temporal Learning', Sharif University of Technology. |
| 13:35 | Burmeister, T., Mastrodicasa, D., Araujo, R., Di Lorenze, E., Cosco, F., Günther, D., and Schröder, T., 'Experimental Validation of a Structural FE Model for Aerospace-Relevant Dynamics', Siemens Industry Software NV. |
| 13:35 | Fejer, A., and Gazdagh, Z. G., 'From FRF-Based Inertia Identification to Model Correlation in the Rigid-Body Range', Robert Bosch Kft.. |
| 13:35 | Campos, N. B. F., and Dos Santos, J. M. C., 'Spectral Element Analysis of Multi-Material Thin-Plate Phononic Crystals', Federal University of ABC (UFABC). |
| 13:35 | Ferrari, A., Dall'Olio, F., Manconi, E., and Garziera, R., 'Advanced Wave Propagation Modelling in Arterial Systems for Structural Pathology Detection', Università degli Studi di Parma. |
| 13:35 | Piket, J., Wijnant, Y., and Müller, R., 'The vibrational response of a flat plate excited by a turbulent boundary layer', University of Twente. |
| 13:35 | Dardeno, T. A., Hughes, A. J., Jones, M. R., and Tsialiamanis, G., 'A multi-modal multi-component experimental dataset for the definition of a digital twin of a structural system', University of Sheffield. |
| 13:35 | Bargagna, E., Passarelli, D., Michel, A., and Neri, P., 'Experimental Characterization of Microphonics in SRF Cavities Using Affordable RF Instrumentation', University of Pisa. |
| 13:35 | Anastasio, D., and Marchesiello, S., 'Experimental frequency-domain modeling for nonlinear structural dynamics in standard industrial testing', Politecnico di Torino. |
| 13:35 | Szabó, M., and Habib, G., 'Numerical continuation framework for rapid analysis of basin stability', Budapest University of Technology and Economics. |
| 13:35 | Charity, T., Hargreaves, J., Smith, J., and Meggitt, J., 'Wave Field Control for the Characterisation of Point-Like Junctions', University of Salford. |
| 13:35 | Bai, A. A. K., and Radhika, B., 'Characterization of breathing cracks using instantaneous analysis of amplitude and phase spectrograms', NIT Calicut. |
| 13:35 | Esquivel-Sancho, L. M., GhandchiTehrani, M., and Muñoz-Arias, M., 'Energy-Based Damage Indicators for Cantilever Beams: Parametric Modeling, Sensitivity Analysis, and Experimental Validation', University of Groningen. |
| 13:35 | Fadillah, M. S., Agathos, K., and Papatheou, E., 'Multiclass Synthetic Data using Generative Adversarial Network for Structural Health Monitoring', University of Exeter. |
| 13:35 | Ristic, N., and Leitner, M., 'Simple generation of spectra used in vibration fatigue analysis', Graz University of Technology. |
| 13:35 | Tcherniak, D., Liu, B., and Branner, K., 'Wireless accelerometers for operational modal analysis of a wind turbine blade', Hottinger Bruel and Kjaer. |
| 13:35 | Preston, O., Rogers, T., and Worden, K., 'Using Sparse Regression of Higher Order Frequency Response Functions to Recover Nonlinear Relationships', University of Sheffield. |
| 13:35 | Gong, S., Wang, L., Shen, C., Li, Z., and Jommi, C., 'An experimental investigation of sleeper-passing frequency in train-induced ground vibration: characteristics and applications', TU Delft. |
| 13:35 | Ámon, A. M., Dózsa, T., and Kovács, P., 'Acoustic overload detection with rational Gaussian wavelet based convolutional neural networks', ELTE Faculty of Informatics. |