Detailed technical programme: papers per session

An overview of the presented papers per thematic session can be found below. The author in bold is the submission's presenting author and the full paper can be downloaded via the according link.

---

Keynote Session

KEY - Monday 9 Sep 2024

10:00	Antoni, J., 'Signal processing in mechanical engineering: a historical perspective and current challenges', INSA Lyon. ( abstract, full paper )
10:45	Dindorf, C., Pandiya, N., and Schmidt, A., 'Shaping vibration engineering for the automotive transformation', Robert Bosch GmbH. ( abstract, full paper )

---

Active Vibration Control

AVC1 - Tuesday 10 Sep 2024

08:30	Ellis, J., Balatti, D., Haddad Khodaparast, H., Jiffri, S., and Friswell, M., 'Reduction of root loads due to gusts via active hinged wing tip control', Swansea University. ( abstract, full paper )
08:55	Berkhoff, A., 'Decentralized feedback damping with distributed control applied to ducts and anechoic chambers', University of Twente. ( abstract, full paper )
09:20	Ostrowski, M., Blachowski, B., Mikułowski, G., and Jankowski, Ł., 'Semi-active control of modal energy transfer by means of lockable joints: theory and applications', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )
09:45	Mikułowski, G., Ostrowski, M., Blachowski, B., and Jankowski, Ł., 'Semi-active control of modal energy transfer by means of lockable joints:­ experimental verification', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )

AVC2 - Tuesday 10 Sep 2024

10:35	Bucher, I., Friedlander, M., and Uzhansky, E., 'Exploiting fluid nonlinearity for sound control and sensing with parametric speakers', Technion, Israel Institute of Technonology. ( abstract, full paper )
11:00	Garcia, T., Rémond, D., and Chesné, S., 'Active vibration control of cable-driven parallel robots', INSA Lyon. ( abstract, full paper )
11:25	Jedlińska, A., Pisarski, D., Mikułowski, G., Błachowski, B., and Jankowski, Ł., 'Damage detection in a semi-active structural control system based on reinforcement learning', Institute of Fundamental Technological Research Polish Academy of Sciences. ( abstract, full paper )
11:50	Cheer, J., Singleton, L., and Tan, J., 'Integration of active control with a compound acoustic black hole', University of Southampton. ( abstract, full paper )

AVC3 - Wednesday 11 Sep 2024

08:30	Karl, T., and Sachau, D., 'Comparison of feedback and feedforward active noise control concepts in an application with a partially open window', Helmut-Schmidt-University Hamburg. ( abstract, full paper )
08:55	Nikolaou, C., Cheer, J., and Langfeldt, F., 'An investigation into the combination of passive acoustic treatments and active structural acoustic control', University of Southampton. ( abstract, full paper )
09:20	Pike, X., and Cheer, J., 'Comparison of neural network architectures for feedforward active control of nonlinear systems', University of Southampton. ( abstract, full paper )

AVC4 - Wednesday 11 Sep 2024

10:10	Rodriguez, J., Carvalho, A., and Chesné, S., 'On a new methodology for adaptive sliding mode control with self-tuning threshold: application to active vibration control', INSA Lyon. ( abstract, full paper )
10:35	Arandia-Krešić, S., Alujević, N., Mikšik, N., and Bolat, F. Ç., 'Active metamaterial cell for nonreciprocal sound transmission', University of Zagreb. ( abstract, full paper )
11:00	Paixão, J., Platzer, A., Rodriguez, J., Blal, N., and Baguet, S., 'Data-driven nonlinear restoring force identification using Gaussian Process regression model for feedback linearization', INSA Lyon. ( abstract, full paper )

---

Aeroacoustics and flow noise

AA - Tuesday 10 Sep 2024

08:30	Rapisarda, A., Sangiuliano, L., D'Alessandro, L., and Pugno, N. M., 'Numerical aero-acoustic performance investigation of an axial fan with a bio-inspired structures design', University of Trento. ( abstract, full paper )
08:55	Arnoult, T., Zamponi, R., Glabeke, G., Toulorge, T., Jovanovic, V., Schram, C., and Planquart, P., 'Aeroacoustic measurements of a high-lift model with different slat track geometries', Von Karman Institute for Fluid Dynamics. ( abstract, full paper )
09:20	Jovanovic, V., Arnoult, T., Zamponi, R., Glabeke, G., Schram, C., Planquart, P., and Toulorge, T., 'Numerical Study on the Aeroacoustic Impact of Slat Tracks in a High-Lift Wing Configuration', Cenaero. ( abstract )

---

Characterisation, design and optimisation of Acoustic Materials

CAM1 - Wednesday 11 Sep 2024

08:55	Giannini, D., and Reynders, E. P. B., 'Optimized multi-modal rotational resonators for enhanced sound insulation in metamaterial cross-laminated timber panels', KU Leuven. ( abstract, full paper )
09:20	Leung, K., and Langfeldt, F., 'A numerical study of a vibro -acoustic metamaterial with an embedded Helmholtz Resonator', University of Southampton. ( abstract, full paper )
09:45	Ogun, O., Rice, H. J., and Kennedy, J., 'The influence of dataset generation on the performance of deep learning for AMM design', Trinity College Dublin. ( abstract, full paper )

CAM2 - Wednesday 11 Sep 2024

10:35	Lundberg, E., Mao, H., Gaborit, M., Semeniuk, B. P., Rumpler, R., and Goransson, P., 'Tuning low-frequency sound absorption in anisotropic multilayered poroelastic media using analytical microstructure modelling', KTH Royal Institute of technology. ( abstract, full paper )
11:00	Gomez, T. S., Jun, D., Cuenca, J., Sebaa, N., De Ryck, L., Armstrong, R., Piana, E., and Glorieux, C., 'Extraction of tortuosity of melamine foam from ultrasonic transmission measurements: experimental improvement', KU Leuven. ( abstract, full paper )
11:25	Niedzielczyk, M., Galland, M.-A., and Zieliński, T. G., 'An acoustic material with tortuous slits filled with fibres', Institute of Fundamental Technological Research Polish Academy of Sciences. ( abstract, full paper )
11:50	Opiela, K. C., Dauchez, N., Boutin, T., Bécot, F.-X., Chevillotte, F., Venegas, R., and Zieliński, T. G., 'Comparison of double-porosity sound absorbers made of sintered or glued powder grains', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )

---

Condition monitoring of rotating machinery

CMRM1 - Tuesday 10 Sep 2024

14:25	Xu, D., Renson, L., and Schwingshackl, C., 'Rotor state monitoring in full-scale industrial turbomachinery using component-based transfer path analysis', Technical University of Munich. ( abstract, full paper )
14:50	Guo, Y., and Zhang, J. Y., 'Using rotary encoder signals for rotary vector reducer cycloidal gear fault detection', Kunming University of Science and Technology. ( abstract, full paper )
15:15	Kirouac, M., Venne, K., and Merkhouf, A., 'Development of a first-level nonintrusive acoustical method for health monitoring of hydroelectric generators', Hydro-Québec. ( abstract, full paper )

CMRM2 - Wednesday 11 Sep 2024

08:30	Pancaldi, F., D'Elia, G., and Cocconcelli, M., 'Harmonic-percussive source separation for fault detection in ball bearings characterized by cyclic polynomial motion law', University of Modena and Reggio Emilia. ( abstract, full paper )
08:55	Marsick, A., Andre, H., Khelf, I., Alloin, L., Leclere, Q., and Antoni, J., 'Pseudo-cyclostationarity of bearing IAS signals: cage resynchronisation & synchronous averaging', Laboratoire Vibrations Acoustique. ( abstract, full paper )
09:20	Mantas, P., Mauricio, A. R., Goossens, S. F., Ojo, D. S., Berghmans, F., and Gryllias, K., 'Rolling element bearing diagnostics using Fiber Bragg Grating sensors', Flanders Make @ KU Leuven. ( abstract, full paper )
09:45	Burel, A., Thibault, N., Bourdon, A., Lecouvreur, D., Neveux, N., and Remond, D., 'Angular dynamic model of rotor-bearing-casing interaction for radial contact bearing monitoring', INSA Lyon, Université de Lyon. ( abstract, full paper )

CMRM3 - Wednesday 11 Sep 2024

10:35	Smith, W., Borghesani, P., Randall, R., Antoni, J., El Badaoui, M., and Peng, Z., 'Bearing diagnostics in high speed applications', University of New South Wales. ( abstract, full paper )
11:00	Gabrielli, A., Battarra, M., Mucchi, E., and Dalpiaz, G., 'An algorithm based on digital twin sets of solutions for rolling-element bearing prognostics', University of Ferrara. ( abstract, full paper )
11:25	Maljaars, E., Ravesloot, J., Janssen, A. C. F., Mol, H. A., Murguia, C. G., and Fey, R. H. B., 'On the potential of bearing strain signals for defect severity estimation: modeling and experiments', SKF B.V.. ( abstract, full paper )
11:50	Hosseinli, S. A., Ooijevaar, T., and Gryllias, K., 'Remaining useful life prediction of bearings under steady and varying operating conditions using digital twin-based deep learning', Flanders Make @ KU Leuven. ( abstract, full paper )

CMRM4 - Wednesday 11 Sep 2024

13:35	Zhu, R., Maele, D. V., Poletto, J. C., Baets, P. D., and Gryllias, K., 'Development and evaluation of vibration indicators for gear pitting detection', Flanders Make @ KU Leuven. ( abstract, full paper )
14:00	Kramti, S. E., André, H., Sayadi, M., and El Badaoui, M., 'Advanced diagnostic methods for bearings in wind turbine: indicators analysis and hyperparameters automation', Université Jean Monnet de Saint-Etienne. ( abstract, full paper )
14:25	Trapp, A., Schmidt, D., and Wokusch, S., 'Bispectral analysis of envelopes – a very efficient algorithm for detecting cyclo-stationary components under noise', Siemens Mobility GmbH. ( abstract, full paper )
14:50	Michalak, A., Hebda-Sobkowicz, J., Wodecki, J., Dybkowski, M., Wolkiewicz, M., Weisse, S., Valire, J., Szabat, K., Zimroz, R., and Wylomanska, A., 'Statistical test for cyclostationarity based on CSC-based indicators - application to vibration signals from electric motor', Wroclaw University of Science and Technology. ( abstract, full paper )
15:15	Matthys, J., Peeters, C., Protopapadakis, G., Sterckx, J., and Helsen, J., 'Comparative analysis of vibration and angular speed signals using synchronized data acquisition for bearing fault detection', Vrije Universiteit Brussel. ( abstract, full paper )

---

Damping

D - Tuesday 10 Sep 2024

10:10	Couet, M., Deü, J.-F., Rouleau, L., Thouverez, F., and Gruin, M., 'Topology optimization of constrained layer damping on fan blades', Safran Aircraft Engines / CNAM Paris / Ecole Centrale Lyon. ( abstract, full paper )
10:35	Terzioglu, F., and Rongong, J. A., 'A simple predictive method for evaluating damping from thin viscoelastic layers in structures', The University of Sheffield. ( abstract, full paper )
11:00	Black, J., Clawson, S., Allen, M., Crane, N., and Nelson, T., 'Nonlinear dynamic properties of powders in additively manufactured steel beams', Brigham Young University. ( abstract, full paper )
11:25	Balmes, E., Martin, G., and Vo Van, O., 'Non-linear viscoelastic damping: designing tests needed for transient simulation of a rail track', ENSAM / SDTools. ( abstract, full paper )
11:50	Bruzzone, F., and Rosso, C., 'The importance of damping in nonlinear gear meshing simulations', Politecnico di Torino. ( abstract, full paper )

---

Dynamic environmental testing

DET1 - Monday 9 Sep 2024

13:25	Dal Borgo, M., Musella, U., Thielemans, L., Vettori, S., G. de Miguel, A., Pastorino, R., Di Lorenzo, E., and Peeters, B., 'Real-time virtual shaker testing using an executable digital twin', Siemens Digital Industries Software. ( abstract, full paper )
13:50	Schultz, R., and Carter, S., 'Possible advantages to using a force-controlled MIMO test method for free-flight environments', Sandia National Laboratories. ( abstract, full paper )
14:15	Behling, M., Allen, M., Mayes, R., and DeLima, W., 'Understanding fixture design in IMMATs through FEM simulations', Brigham Young University. ( abstract, full paper )
14:40	Soine, D., 'Resonant plate shock test response with isolated damping bars', Sandia National Laboratories. ( abstract, full paper )
15:05	Viale, L., Daga, A. P., Fasana, A., and Garibaldi, L., 'Optimization of irregular-shaped resonant plates for pyroshock testing in the aerospace industry', Politecnico di Torino. ( abstract, full paper )
15:30	Palmieri, M., Cianetti, F., Slavič, J., and Braccesi, C., 'Fast evaluation of kurtosis and skewness by modal decomposition for fatigue analysis in frequency domain under non-Gaussian random loads', University of Perugia. ( abstract, full paper )

DET2 - Monday 9 Sep 2024

16:20	Aimé, M., Banvillet, A., Khalij, L., Pagnacco, E., Chatelet, E., and Dufour, R., 'Multiaxial test-tailored vibration specifications: process overview', French Alternative Energies and Atomic Energy Commission (CEA). ( abstract, full paper )
16:45	Garcia de Miguel, A., Araujo, R., Musella, U., dal Borgo, M., Forrier, B., di Lorenzo, E., and Cornelis, B., 'Multi-axis shock and vibration control testing of automotive battery packs: challenges of an innovative testing practice', Siemens Industry Software NV. ( abstract, full paper )
17:10	Carter, S. P., and Rohe, D., 'Using multi-shaker force control methods in modal analysis', Sandia National Laboratories. ( abstract, full paper )
17:35	Proner, E., and Mucchi, E., 'A novel MIMO random control strategy for efficient response replication at the component level', University of Ferrara. ( abstract, full paper )
18:00	Decobert, F., Faye, S., and Bemol, L., 'Development of multiaxial vibration test systems for small objects', SEREME. ( abstract, full paper )

---

Dynamic testing: methods and instrumentation

DT1 - Tuesday 10 Sep 2024

15:40	Case, J. A., Barnard, A., and Taggart, A., 'Non-contact measurement of haptic systems', Penn State. ( abstract, full paper )
16:05	Buchbach, R., Sinske, J., Govers, Y., and Böswald, M., 'Database-supported correlation of modal data - the DLR correlation tool', German Aerospace Center. ( abstract, full paper )
16:30	Machacek, M., Hračov, S., Vavřík, D., and Rada, V., 'Comparison of fundamental natural modes of cantilevered beam obtained by 3D X-ray computed tomography and laser Doppler vibrometry', The Institute of Theoretical and Applied Mechanics. ( abstract, full paper )
16:55	Pierro, E., and Carbone, G., 'Thermal fluctuations of nano cantilevers for the detection of the biological particles modifications', University of Basilicata. ( abstract, full paper )
17:20	Danforth, S. M., Johnson, S. M., Fenstermacher, K. F., Ramirez, A. J., Sedillo, H. R., Schultze, J. F., and Ferguson, E. W., 'Developing methods for single-axis base excitation vibration testing with additional distributed shakers', Los Alamos National Laboratory. ( abstract, full paper )
17:45	Diord Rescinho Amador, S., 'A new poly-reference complex frequency-domain identification technique formulated in state-space model', Technical University of Denmark (DTU). ( abstract, full paper )

DT2 - Wednesday 11 Sep 2024

13:35	Vettori, S., Mastrodicasa, D., Sosa Chavez, A., Laurini, A., Di Lorenzo, E., and Janssens, K., 'Distributed load and full-field response reconstruction during wind tunnel testing of an aluminum wing', Siemens Digital Industries Software. ( abstract, full paper )
14:00	Maressa, A., 'Model-based approach to enhance CVT pushbelt testing and product performance', Bosch Transmission Technology. ( abstract, full paper )
14:25	Nunes, J. T. T., Policarpo, H., Neves, M. M., and Maia, N. M. M., 'Frequency-domain estimation of acoustic and vibro-acoustic responses using transmissibility functions and few sensors', IDMEC. ( abstract, full paper )
14:50	Thielemans, L., Sputh, B. H. C., Pastorino, R., Desmet, W., and Swevers, J., 'Industrial application of residual power method as co-simulation performance indicator for e-motor hybrid-physical-virtual test setup', Siemens Industry Software NV. ( abstract, full paper )
15:15	Donderer, M., Rieß, A., Waldenmaier, U., Neher, J., and Ehlers, S., 'Participation factor based identification of mode shapes', MAN Energy Solutions SE. ( abstract, full paper )

---

Dynamics of Joints

JOINT1 - Tuesday 10 Sep 2024

08:30	Porter, J. H., and Brake, M. R., 'Superharmonic resonances and model validation with the Half Brake-Reuss Beam', Rice University. ( abstract, full paper )
08:55	Farokhi, H., Jamia, N., Jalali, H., Taghipour, J., Haddad Khodaparast, H., and Friswell, M. I., 'A new distributed joint model for non-ideal supports in curved panels under large-amplitude vibrations', Northumbria University. ( abstract, full paper )
09:20	Jamia, N., Pandey, P., Farokhi, H., Friswell, M. I., Haddad Khodaparast, H., and Jalali, H., 'Experimental analysis of dynamic characteristics in bolted joint interfaces of thin plates', Swansea University. ( abstract, full paper )

JOINT2 - Tuesday 10 Sep 2024

10:35	Brunetti, J., D'Ambrogio, W., Di Manno, M., Fregolent, A., and Ialonardi, M., 'Dual substructure decoupling for joint identification with unmeasurable interface: a comparative study', Università degli studi di Roma La Sapienza. ( abstract, full paper )
11:00	Korbar, J., Ocepek, D., Boltežar, M., and Čepon, G., 'Training artificial neural networks using substructuring techniques: application to joint identification', University of Ljubljana, Faculty of Mechanical Engineering. ( abstract, full paper )
11:25	Kreutz, M., Trainotti, F., and Rixen, D. J., 'On the experimental linear identification of a multiple-joint bolted connection using frequency-based substructuring', Technical University of Munich. ( abstract, full paper )

---

Dynamics of Rotating Machinery

RMD1 - Monday 9 Sep 2024

13:25	Hay, G., Giraud-Audine, C., Mahé, H., and Thomas, O., 'Electromagnetic shunt damping for torsional vibration reduction in rotating structures: theory, optimization, and experimental insights', Arts et Métiers. ( abstract, full paper )
13:50	Caselli, L., Rizzitelli, M., Rivola, A., and Troncossi, M., 'On the numerical modelling of a rotor system to support the analysis of experimental vibration signals for the condition monitoring of a CN lathe integrated with an automatic bar feeder', University of Bologna. ( abstract, full paper )
14:15	Els, D. N. J., and Venter, M. P., 'Investigation of large, air-cooled condenser drive-train torque oscillations during startup', Stellenbosch University. ( abstract, full paper )
14:40	Kimpián, T. A., and Augusztinovicz, F., 'Experimental validation of the linear transducer model of permanent magnet synchronous motors for torsional vibration analysis applications', thyssenkrupp Components Technology Hungary Ltd.. ( abstract, full paper )
15:05	Desenfans, P., Gong, Z., Vanoost, D., Gryllias, K., and Pissoort, D., 'Modelling mechanical faults in induction motors using magnetic equivalent circuits and lumped-element shaft-bearing dynamics', KU Leuven, Bruges Campus. ( abstract, full paper )

RMD2 - Tuesday 10 Sep 2024

08:30	Martini, V. M., Okabe, E. P., and Cavalca, K. L., 'Extraction of the rotor dynamic behavior on a flexible support structure by dynamic substructuring', University of Campinas. ( abstract, full paper )
08:55	Syamlan, A., Denis, K., Vander Poorten, E., and Tjahjowidodo, T., 'Cutting torque model for patient - specific pedicle screw surgical simulators', KU Leuven. ( abstract, full paper )
09:20	Überwimmer, G., Klanner, M., and Ellermann, K., 'Analysis of rotor-bearing systems utilising fractional derivative material damping models', Graz University of Technology. ( abstract, full paper )
09:45	Baekeland, M., Cuypers, C., Delabie, T., Seiler, R., Gryllias, K., and Vandepitte, D., 'Modelling and tuning of a permanent magnetic suspension system for low-vibration flywheels', KU Leuven. ( abstract, full paper )

RMD3 - Tuesday 10 Sep 2024

10:35	Abuhemeida, N., Vaillant, D., Chevallier, G., Cronfalt, F., Topenot, M., and Ouisse, M., 'Examining sliding in rotor assemblies: an experimental study', Femto ST / Alstom. ( abstract, full paper )
11:00	Vancauwenbergh, L., Verbist, M., Vandepitte, D., Naets, F., Moens, D., Vanneste, G., Claessens, S., and Vercruijsse, P. M., 'Analyzing transient cutting behaviour of a cutter suction dredger drive train: enhancing operational efficiency through co-simulation', KU LEUVEN. ( abstract, full paper )
11:25	Radoš, R., Alujević, N., Vladimir, N., Arandia-Krešić, S., and Catipović, I., 'Exact and an approximate solution for free vibrations of rotating cylindrical shells having both ends clamped', University of Zagreb. ( abstract, full paper )

---

Dynamics of civil structures

CIV - Tuesday 10 Sep 2024

16:05	Maes, K., Verbist, K., Berten, K., Reynders, E., and Lombaert, G., 'The use of strain-based unit influence lines for structural health monitoring of railway bridges', KU Leuven. ( abstract, full paper )
16:30	Reynders, E., Godeau, J., Jovanović, B., van de Velde, M., Vastiau, J., Anastasopoulos, D., Lombaert, G., Caspeele, R., and Van Coile, R., 'Vibration-based condition assessment of concrete beams after fire loading', KU Leuven. ( abstract, full paper )
16:55	Gothard, A. T., Wall, C., Henderson, R. C., Anton, S. R., Cardinal, M., and Taggart, A., 'Initial validation of a local structural dynamics monitoring system for smart buildings', Tennessee Technological University. ( abstract, full paper )
17:20	Paroissien, J., Lardeur, P., and Oudjene, M., 'Finite element models for laminated timber structures using solid, solid-beam and solid-shell approaches', Université de Technologie de Compiègne, Université Laval. ( abstract, full paper )

---

GECKO session

GECKO - Wednesday 11 Sep 2024

10:35	Le, P., Panagiotopoulos, D., and Deckers, E., 'Model order reduction of isogeometric BEM systems via Krylov subspace recycling', Flanders Make @ KU Leuven. ( abstract, full paper )
11:00	Antonelli, N., Gorgi, A., Aristio, R., Zorrilla, R., Rossi, R., Scovazzi, G., and Wüchner, R., 'Application of the isogeometric shifted boundary method to the Poisson problem', CIMNE. ( abstract, full paper )
11:25	Aristio, R., Alkhlaifat, M., Camarotti, J. I., and Wüchner, R., 'CAD-integrated isogeometric analysis of trimmed multipatch shells for transient non-linear problems', Technische Universität Braunschweig. ( abstract )
11:50	Pagonas, A., Radtke, L., Torre, M., Hughes, T. J. R., Düster, A., Sangalli, G., and Reali, A., 'Immersed IGA and mass lumping for explicit dynamics of 1D structural elements', University of Pavia. ( abstract, full paper )

GECKO_S - Industrial workshop - Wednesday 11 Sep 2024

13:30	Introduction to GECKO project and Isogeometric analysis
15:15	Technical presentations - Industrial applications of IGA

---

Greydient project

GREY1 - Wednesday 11 Sep 2024

08:55	Dodt, M. B., Bogaerts, L., Persoons, A., Faes, M. G. R., and Moens, D., 'A multifidelity framework for grey-box modelling of automated welding processes', Flanders Make @ KU Leuven. ( abstract, full paper )
09:20	Colella, G., Lange, V. A., and Duddeck, F., 'A transfer learning framework for crashworthiness analysis based on sphere projection and PointNN', BMW AG. ( abstract, full paper )
09:45	Giannoukou, K., Ascia, P., Marelli, S., Duddeck, F., and Sudret, B., 'Exploring multi-fidelity noisy data: methods and real-world examples', ETH Zurich. ( abstract, full paper )

GREY2 - Wednesday 11 Sep 2024

10:35	Pires, A. V., Moustapha, M., Marelli, S., and Sudret, B., 'New insights on reliability analysis for stochastic simulators using surrogate models', ETH Zurich. ( abstract, full paper )
11:00	Bonnet-Eymard, D., Persoons, A., Gavallas, P., GR Faes, M., Stefanou, G., and Moens, D., 'Physics-informed neural networks to propagate random field properties of composite materials', Flanders Make @ KU Leuven. ( abstract, full paper )
11:25	Faraci, A., Beaurepaire, P., and Gayton, N., 'Enhancing reliability-based design optimization through adaptive Kriging and gradient-free optimization', Université Clermont Auvergne. ( abstract, full paper )
11:50	Ascia, P., and Duddeck, F., 'Enhancing development flexibility: a grey-box strategy for adapting to unforeseen adverse conditions', Technische Universität München. ( abstract, full paper )

---

Inverse Methods - Load Identification

INV1 - Tuesday 10 Sep 2024

13:35	Trekels, W., Staiger, J., del Fresno Zarza, J., and Naets, F., 'Lumped parameter modelling rubber bushing dynamics in free-free boundary condition', Flanders Make @ KU Leuven. ( abstract, full paper )
14:00	Wu, P., Magnevall, M., Liljerehn, A., and Östling, D., 'Cutting force estimation in metal cutting tools: a study on a sensor-equipped cantilever beam', AB Sandvik Coromant. ( abstract, full paper )
14:25	Marion, M., Lossouarn, B., Rouleau, L., Voisin, A., Leblond, C., and Deü, J.-F., 'Modal analysis of metallic structures filled with elastomer and inverse identification of material parameters', Conservatoire National des Arts et Métiers. ( abstract, full paper )
14:50	Brion, T., Li, X., Fossat, P., Ichchou, M., Bareille, O., and Zine, A.-M., 'Algebraic k-space identification 2D technique for the automatic extraction of complex k-space of 2D structures in presence of uncertainty', Ecole Centrale de Lyon. ( abstract, full paper )

INV2 - Wednesday 11 Sep 2024

10:10	Reymert, S., and Wiig Petersen, Ø., 'Application of an augmented Kalman filter to the inverse identification of aerodynamic loads on a road vehicle', Norwegian University of Science and Technology. ( abstract, full paper )
10:35	Mora, B., Basurko, J., and Sabahi, I., 'Force virtual sensing applied to a structure excited by an inertial shaker', Ikerlan S.Coop. ( abstract, full paper )
11:00	Mao, H., Holmén, A., Yin, B., Rumpler, R., Tibert, G., and Göransson, P., 'Characterization of thermal elastic moduli of anisotropic lattice metamaterials: designing dual-functional metamaterials with low thermal expansion and vibration mitigation capabilities', KTH Royal Institute of Technology. ( abstract, full paper )
11:25	Kent, J. J., De Carvalho Loures, M., and Gower, A. L., 'A tomographic method to predict forces in a rolling element bearings', University of Sheffield. ( abstract, full paper )

---

Lightweight Structures and Materials

LW - Tuesday 10 Sep 2024

08:30	Schedlinski, C., 'Pitfalls in shaker vibration tests on lightweight structures', ICS Engineering GmbH. ( abstract, full paper )
08:55	Li, X., Mao, H., Ichchou, M., Rumpler, R., and Göransson, P., 'Determination of the equivalent mechanical parameters of honeycomb sandwich structures under the algebraic identification framework', KTH Royal Institute of Technology. ( abstract, full paper )
09:20	Melero, M., Nieto, A. J., Morales, A. L., Jimenez, J., Ramiro, C., and Pintado, P., 'Experimental analysis of passive damping techniques applied to a cantilever beam using piezoelectric patches and constrained layer damping', Universidad de Castilla-La Mancha. ( abstract, full paper )
09:45	Hüttich, P., and Krause, D., 'Holistic approach to vibration characterisation of large structural components in thermal environment', TUHH. ( abstract, full paper )

---

MOIRA session

MOIRA1 - Tuesday 10 Sep 2024

14:00	mostafavi, a., and Friedmann, A., 'Bayesian convolutional neural network models for uncertainty-aware bearing fault detection', Fraunhofer LBF. ( abstract, full paper )
14:25	Kunte, D. S., Marx, D. G., Cornelis, B., Colangeli, C., and Gryllias, K., 'Data-efficient fault detection in vehicle end-of-line testing through fault location-informed classification', Siemens Digital Industries Software NV. ( abstract, full paper )
14:50	Jia, L., Cornelis, B., and Gryllias, K., 'Validation of time series anomaly detection methods for automated detection of measurement anomalies in noise and vibration testing', Siemens Digital Industries Software. ( abstract, full paper )
15:15	Shiri, H., Zimroz, P., Wylomanska, A., and Zimroz, R., 'Robust remaining useful life prediction from time-varying health index data in presence of heavy-tailed noise', Wroclaw university of science and technology. ( abstract, full paper )

MOIRA2 - Tuesday 10 Sep 2024

16:05	Marx, D., Kunte, D., Cornelis, B., and Gryllias, K., 'A method for adding domain knowledge to semi-supervised fault detection using signal processing gradients', Flanders Make @ KU Leuven. ( abstract, full paper )
16:30	Ahani, M., Bourdon, A., and Rémond, D., 'Characterization and identification of nonlinear cyclic excitations in non-stationary gearbox operations', INSA-Lyon. ( abstract, full paper )
16:55	Karkafi, F., Leiber, M., Leclère, Q., Antoni, J., and El Badaoui, M., 'A two-step synchrosqueezing transform approach mitigating reallocation errors in time-frequency analysis', Safran. ( abstract, full paper )
17:20	Jabbar, A., Fonte, C., D'Elia, G., and Cocconcelli, M., 'Ball-bearings fault detection for an independent cart system: experimental campaign and preliminary results', University of Modena and Reggio Emilia. ( abstract, full paper )
17:45	De Fabritiis, F., and Gryllias, K., 'A vibration based self-learning approach for machine condition monitoring', Flanders Make @ KU Leuven. ( abstract, full paper )

---

Model Order Reduction

MOR - Tuesday 10 Sep 2024

15:40	Ratke, X. Y., and Sattel, T., 'Vibration reduction design approach for motor-driven fans using piezoelectric actuators including identification, model order reduction and optimization', TU Ilmenau. ( abstract, full paper )
16:05	Peri, L., Pagano, M., Dozio, L., and Nali, P., 'A hybrid two-stage model order reduction and substruc- turing scheme involving Craig-Bampton method and bal- anced truncation', KU Leuven. ( abstract, full paper )
16:30	De Gregoriis, D., Capurso, F., and Atak, O., 'Structural model parameter identification: leveraging augmented kalman filtering and parametric reduced order models within an optimization scheme', Siemens Digital Industries Software. ( abstract, full paper )
16:55	Fleres, D., De Gregoriis, D., Atak, O., and Naets, F., 'Non-intrusive parametric hyper-reduction for nonlinear structural finite elements formulations', Siemens Digital Industries Software. ( abstract, full paper )
17:20	Khan, M., Pacini, B. R., and Kuether, R. J., 'Harmonic balance based methodology for reduced order modeling to predict response of nonlinear structures', Sandia National Laboratories. ( abstract, full paper )
17:45	Tatsis, K., and Agathos, K., 'A deep-learning approach for the identification of reducedorder nonlinear dynamics', Swiss Data Science Center (SDSC). ( abstract, full paper )

---

Model Update

MU - Tuesday 10 Sep 2024

16:05	Balmes, E., Vermot des Roches, G., and Nacivet, S., 'Hybrid FEM/test twin building, an electric engine case history', ENSAM / SDTools. ( abstract, full paper )
16:30	Chocholaty, B., Leiber, C., and Marburg, S., 'Effects of similarity measures and assignment methods on mode pairing for the application of timber plates', Technical University of Munich. ( abstract, full paper )
16:55	Bronkhorst, A. J., Marchelli, E., Moretti, D., Maes, K., and Lombaert, G., 'Identification of the modal and structural properties of a high-rise scale model', TNO. ( abstract, full paper )
17:20	Kamper, M., and Naets, F., 'Geometric parameter estimation of thin-walled structures using finite element model updating, shape optimisation and frequency response functions', Flanders Make @ KU Leuven. ( abstract, full paper )
17:45	Wang, T., Bi, S., and Mottershead, J. E., 'The role of the conditional network in data-driven stochastic model updating based on the conditional invertible neural network (cINN)', University of Southampton. ( abstract, full paper )

---

Multi-body dynamics and control

MB - Wednesday 11 Sep 2024

13:35	Mazzanti, L., Vivet, M., De Gregoriis, D., and Naets, F., 'A Kalman-based approach to drivetrain misalignment estimation', Flanders Make @ KU Leuven. ( abstract, full paper )
14:00	El Yousfi, B., Soualhi, A., Lourari, A., Bouzar Essaidi, A., and El Amli, A., 'Effect of gear teeth elastic deformation on the gear mesh stiffness of parallel gearboxes', Ecole Militaire Polytechnique. ( abstract, full paper )
14:25	Schneider, S., Graf, B., Refik, E., and Giese, T., 'Advanced practical gearbox NVH analyses: an engineering guide', Ulm University of Applied Sciences. ( abstract, full paper )
14:50	Malund Dammark Jensen, A., Lund Thing, M., Gres, S., and Abbiati, G., 'Input-state estimation for multi-body dynamic systems with Bayesian filters', Aarhus University. ( abstract, full paper )
15:15	Werner, D., Offner, G., Lorenz, N., and Schweiger, C., 'Refining gearbox multibody simulation: enhancements for NVH and acoustic analysis', AVL Deutschland GmbH. ( abstract, full paper )
15:40	Goris, M., Deckers, E., and Naets, F., 'Co-simulation approach integrating multibody and discrete element modeling for robomould process analysis', Flanders Make @ KU Leuven. ( abstract, full paper )

---

Non-linearities: identification and modelling

NL1 - Monday 9 Sep 2024

13:25	Cooper, J., 'Prediction of limit cycle oscillations from aeroelastic test data', University of Bristol. ( abstract, full paper )
13:50	Mikkelsen, J. K., Avendaño-Valencia, L. D., and Schlette, C., 'Optimal experimental design for modeling the dynamic response of a pseudo-static moving load on a beam', University of Southern Denmark. ( abstract, full paper )
14:15	Abundis-Fong, H. F., Trujillo-Franco, L. G., Gutierrez-Carmona, I., and Dzul-Lopez, A. E., 'Vibration control of a mechanical system using a passive/semiactive flexible inverted pendulum vibration absorber', Tecnológico Nacional de México/I.T. Pachuca. ( abstract, full paper )
14:40	Bee, S. C., Bull, L., Dervilis, N., and Worden, K., 'Regularising NARX models with multi-task learning', University of Sheffield. ( abstract, full paper )
15:05	Gazdagh, Z. G., Fukker, B., and Vehovszky, B., 'Unlocking the insights of dynamics through experimentation of an electric drive', Robert Bosch Kft. ( abstract, full paper )
15:30	Iglesias, A., Franco, O., Beudaert, X., Sanz-Calle, M., and Munoa, J., 'Analysis of variability in machine tool dynamics through enhanced SMFE method', Ideko S.Coop.. ( abstract, full paper )

NL2 - Monday 9 Sep 2024

16:20	Floren, M., Peri, L., De Maeyer, J., De Munter, W., Vandepitte, D., and Noël, J.-P., 'Data-driven state-space identification and nonlinearity assessment of the CubeSpec Fine Steering Mirror', KU Leuven. ( abstract, full paper )
16:45	Raze, G., and Zhou, T., 'Numerical models and stability analysis of control-based methods for nonlinear vibration testing', University of Liège. ( abstract, full paper )
17:10	Goyder, H., 'Investigation of perfect curve fitting of spectra from linear and non-linear structures using barycentric interpolation', Cranfield University. ( abstract, full paper )
17:35	Shaw, A. D., Nar, E., and Adhikari, S., 'Nonlinear behaviours of a class of inertial amplifiers', Swansea University. ( abstract, full paper )
18:00	Pacini, B. R., Kuether, R. J., and Fowler, D., 'Comparative study of nonlinear modal modeling identification techniques from force appropriation experiments', Sandia National Laboratories. ( abstract, full paper )

NL3 - Tuesday 10 Sep 2024

13:35	Massingham, J., Nielsen, O., and Butlin, T., 'Convolutional neural networks applied to nonlinear dynamical systems: a Wiener series perspective', Cambridge University. ( abstract, full paper )
14:00	Worden, K., 'Revisiting a link between algebraic geometry and nonlinear dynamics', University of Sheffield. ( abstract, full paper )
14:25	Anastasio, D., Marchesiello, S., and Kerschen, G., 'Estimation of the periodic solutions of geometrically nonlinear structures by broadband excitation', Politecnico di Torino. ( abstract, full paper )
14:50	Cuccovillo, F., Berruti, T. M., and Botto, D., 'Exploring feasibility of neural networks for dynamic system with friction damping', Politecnico di Torino. ( abstract, full paper )
15:15	Taghipour, J., Ebrahimzade, N., Pandey, P., Haddad Khodaparast, H., and Friswell, M. I., 'Enhancing model selection for a nonlinear system: a physics-based machine learning approach', Dyson Institute of Engineering and Technology. ( abstract, full paper )

NL4 - Tuesday 10 Sep 2024

16:05	Bull, L., Dardeno, T., Dervilis, N., Glyn-Davies, A., Bunker, J., Girolami, M., and Worden, K., 'Nonlinear normal modes as normalising Kalman filters', University of Glasgow. ( abstract, full paper )
16:30	Mashayekhi, F., and Alcorta, R., 'Damped nonlinear modes and forced response analysis of a system with hybrid nonlinearity', Politecnico di Torino. ( abstract, full paper )
16:55	Amaral, A. C. G., De Roeck, W., and Silveira, M., 'Numerical investigation of the aeroelastic response of a NACA0012-profile in flutter condition including cubic nonlinear stiffness using URANS based simulations', UNESP. ( abstract, full paper )
17:20	Westmeier, T., Kreuter, D., Bucher, S., and Hetzler, H., 'Hybrid deep learning and frequency response function modelling for automotive testing', Robert Bosch GmbH. ( abstract, full paper )
17:45	Raze, G., Abeloos, G., and Kerschen, G., 'Recent advances in control-based nonlinear vibration testing', University of Liege. ( abstract, full paper )

---

Operational modal analysis

OMA - Tuesday 10 Sep 2024

14:00	Sbarra, R. G., Del Priore, E., Coppotelli, G., Lampani, L., and Pasquali, M., 'On the use of fiber optic sensors and operational modal analysis for structural health monitoring in aerospace structures', Sapienza University of Rome. ( abstract, full paper )
14:25	Ricardo Ambrosio, D., Alexandre Camargo, E., Candido de Sousa, V., Fernando Castillo Zúñiga, D., Sartorato, M., Costa, N., and Luiz Oliveira, É., 'Modal characterization of a helicopter stabilizer from flight test campaign with externally mounted accessory', São Paulo State University. ( abstract, full paper )
14:50	Alexandre Camargo, E., Ricardo Ambrosio, D., Candido de Sousa, V., Fernando Castillo Zúñiga, D., Sartorato, M., Costa, N., and Luiz Oliveira, É., 'Effect of rotational speed on the modal parameters of a helicopter blade based on operational modal analysis approach', São Paulo State University. ( abstract, full paper )
15:15	Anastasopoulos, D., and Reynders, E. P. B., 'Experimental and numerical investigation of the influence of the ductile-to-brittle transition of steel on the modal characteristics of a Vierendeel truss bridge', KU Leuven. ( abstract, full paper )

---

Optical Methods & Computer vision for Vibration Engineering

OMCV1 - Monday 9 Sep 2024

13:25	Zaletelj, K., Šonc, J., Slavič, J., and Boltežar, M., 'Thermoelasticity-based strain experimental modal analysis', University of Ljubljana. ( abstract, full paper )
13:50	Xie, K., and Cheng, L.-L., 'A novel phase motion estimation method for structural vibration measurement using two-dimensional hilbert transform', University of Groningen. ( abstract, full paper )
14:15	Neri, P., Paoli, A., Occhipinti, S., Firrone, C., and Botto, D., 'Local digital image correlation algorithms: spatial domain versus frequency domain approach', University of Pisa. ( abstract, full paper )
14:40	Bottalico, F., and Sabato, A., 'Assessment of three-dimensional displacements via a novel natural-pattern tracking algorithm', University of Massachusetts Lowell. ( abstract, full paper )
15:05	Baldini, S., Guernieri, G., Gorjup, D., Gardonio, P., Slavič, J., and Rinaldo, R., 'Reconstruction of cylinder flexural vibration and sound radiation fields from multi-view single-camera measurements', Università degli Studi di Udine. ( abstract, full paper )
15:30	Willems, T., Zaletelj, K., Vanpaemel, S., Slavič, J., and Naets, F., 'Exploiting vision-based motion measurements for the experimental model identification of flexible multibody mechanisms', Flanders Make @ KU Leuven. ( abstract, full paper )

OMCV2 - Monday 9 Sep 2024

16:20	Mastrodicasa, D., Morrone, A., Di Lorenzo, E., Colangeli, C., Cosco, F., and Peeters, B., 'Reconstruction of the sound radiation field from plate DIC vibration measurements', Siemens Industry Software NV. ( abstract, full paper )
16:45	Atashipour, S. R., Rouhollahi, F., and Baqersad, J., 'A non-invasive characterization approach based on digital twin developed using vibration-response', Kettering Unviersity. ( abstract, full paper )
17:10	Cosco, F., Mastrodicasa, D., Mundo, D., and Di Lorenzo, E., 'Video motion and modal magnification: towards a new paradigm for OMA', University of Calabria. ( abstract, full paper )
17:35	Baldini, S., Bernardini, R., Fusiello, A., Gardonio, P., and Rinaldo, R., 'Vibration measurement with event cameras', Università degli Studi di Udine. ( abstract, full paper )
18:00	Occhipinti, S., Cesaretti, A., Neri, P., Firrone, C. M., and Botto, D., 'Analysis of nonlinear vibrations of a blade with dovetail attachment using DIC and the smoothed harmonics analysis', Politecnico di Torino. ( abstract, full paper )

OMCV3 - Tuesday 10 Sep 2024

10:10	Bittner, W., Slimak, T., and Jung, H., 'Enhancing dynamic analysis of mechanical systems using dynamic gaussian splatting and motion magnification', Technical University of Munich. ( abstract, full paper )
10:35	Tomac, I., Gorjup, D., and Slavič, J., 'Pixel based experimental modal analysis', University of Split. ( abstract, full paper )
11:00	Herfert, D., Krause, J., Henning, K., and Gollnick, M., 'Examining the dynamic characteristics of a tennis racket through high-speed videos', GFaI e.V.. ( abstract, full paper )
11:25	Peshave, A. M., Wittevrongel, L., Pierron, F., and Lava, P., 'Damage detection in 3D-printed metal alloys by characterization of modal behaviour', MatchID NV. ( abstract, full paper )

---

Periodic structures and metamaterials

PER1 - Monday 9 Sep 2024

15:55	Gupta, T., and Bhattacharya, B., 'Dynamic study of bandgap in hierarchical metastructure', Indian Institute of Technology Kanpur. ( abstract, full paper )
16:20	Lopes, K. W., and de Oliveira, L. P. R., 'Vibration attenuation with shape memory alloy-embedded resonators', São Carlos School of Engineering, University of São Paulo. ( abstract, full paper )
16:45	Kleine-Wächter, L., Rumpler, R., Mao, H., Göransson, P., and Müller, G., 'Numerical and experimental investigations of wave propagation in Kelvin Cell-based periodic lattice architectures', Technical University of Munich. ( abstract, full paper )
17:10	Chojnacka, K., Kras, A., and Kamisiński, T., 'Sound transmission loss dip compensation using multi-resonant vibroacoustic metamaterial designed for injection moulding', AGH University of Krakow. ( abstract, full paper )
17:35	Santo, D. R., Deckers, E., Claeys, C., Boukadia, R. F., and de Oliveira, L. R. P., 'Improving the low-frequency vibration performance of metamaterials with high-static-low-dynamic stiffness local resonators', University of São Paulo. ( abstract, full paper )

PER2 - Tuesday 10 Sep 2024

08:30	Ballestero, E., Meng, Y., Romero-García, V., Tournat, V., and Groby, J.-P., 'Optimal Bi-State Acoustic Metamaterial for Broadband Sound Absorption and Diffusion: A Real-Estate Dilemma', Le Mans Université. ( abstract )
08:55	Monteiro, W. V. O., Nóbrega, E. D., and dos Santos, J. M. C., 'Modeling and numerical analysis of waveguides in defective phononic crystal lattice structures', University of Campinas. ( abstract, full paper )
09:20	Santos, V. M. d. S., Sales, T. d. P., and Ouisse, M., 'A modified generalized Bloch-mode synthesis for the efficient modeling of periodic structures using the wave-based finite element method', Aeronautics Institute of Technology. ( abstract, full paper )
09:45	Rodrigues, G. K., and de Oliveira, L. P. R., 'A multi-mode smart metamaterial for NVH control', University of Sao Paulo. ( abstract, full paper )

PER3 - Tuesday 10 Sep 2024

10:35	Zeng, R., Deckers, E., Glorieux, C., Urbán, D., and Chmielewski, B., 'Locally resonant metamaterial wall targeting tonal noise arising from heat pumps in residential buildings', KFB Acoustics sp. z o. o.. ( abstract, full paper )
11:00	Sanches Schimidt, C., de Oliveira, L. P. R., Janssen, S., Claeys, C., Deckers, E., and De Marqui Junior, C., 'Sound directivity control by tailoring piezoelectric metamaterial vibration modes', Flanders Make @ KU Leuven. ( abstract, full paper )
11:25	Souto, B. A., Beli, D., and De Marqui Jr., C., 'Topological wave states in electromechanical metamaterials', Eindhoven University of Technology. ( abstract, full paper )

---

Railway dynamics and ground vibrations

RAIL - Tuesday 10 Sep 2024

14:00	Talbot, J. P., and Edirisinghe, T., 'Some observations on the significance of soil-structure interaction in the transmission of ground-borne vibration into buildings', University of Cambridge. ( abstract, full paper )
14:25	Roberto Gardel Kurka, P., and Fernandes von Huelsen, L., 'Railway track matching through curvature correlation', Universidade Estadual de Campinas. ( abstract, full paper )
14:50	Kabirian, Z., Carneiro, D., Lombaert, G., and Degrande, G., 'Mitigation of environmental ground vibration in layered soils using seismic metasurfaces', KU LEUVEN. ( abstract, full paper )
15:15	Auzanneau, B., Sadoulet-Reboul, E., Foltête, E., Ham-Livet, G., and Cogan, S., 'A methodology to manage the complexity of a nonlinear multibody digital twin in railway applications', Université Franche-Comté. ( abstract, full paper )

---

Structural dynamics: methods and case studies

SD1 - Monday 9 Sep 2024

15:55	Gao, Y., Ziegler, P., and Eberhard, P., 'A numerical model for reconstructing the transport-induced vibration of paintings on a testbed', University of Stuttgart. ( abstract, full paper )
16:20	Erdelyi, J. A., Gazdagh, Z. G., Bartus, A., and Fukker, B., 'Rattling detection of electric components', Robert Bosch Kft. ( abstract, full paper )
16:45	Cillo, P., Ziegler, P., and Eberhard, P., 'Geometrical parameterization of a finite element model to account for material variability in classical guitar design', University of Stuttgart. ( abstract, full paper )
17:10	Shapira, D., and Bucher, I., 'Optimization of the ultrasonic dynamics and kinematics for a micron-scale accurate ultrasonic transducer', Technion - Israel Institute of Technology. ( abstract, full paper )
17:35	Taylor, C., DeClerck, J., Blough, J., VanKarsen, C., Labyak, D., and Joshua, R., 'Dynamic fixture development for a structure with two independent attachment points', Michigan Technological University. ( abstract, full paper )
18:00	Soresini, F., Barri, D., Manzoni, S., Ballo, F. M., and Gobbi, M., 'Modal characterization of a PMSM using different experimental techniques', Politecnico di Milano. ( abstract, full paper )

SD2 - Tuesday 10 Sep 2024

08:30	Torres, J. E., and Buen, A., 'Vibrations from treadmills', Brekke Strand Akustikk. ( abstract, full paper )
08:55	Chiarelli, M., Boes, R. M., Vetsch, D. F., Blommaert, G., Boden, M., and Münch-Alligné, C., 'Identification of natural frequencies of Pelton runners during transient operating conditions', HES-SO. ( abstract, full paper )
09:20	Manterola, J., Usabiaga, H., Leciñana, I., and Olave, M., 'Vibration fatigue analysis of laser welds on battery modules', IKERLAN. ( abstract, full paper )
09:45	de La Bigne, M., Cattan, E., Ghenna, S., Zwingelstein, M., Grondel, S., and Thomas, O., 'A new design and optimization method of a nano-aerial vehicle with resonant vibrating wings', IEMN. ( abstract, full paper )

SD3 - Tuesday 10 Sep 2024

10:35	Vanpoucke, J., Roelandt, T., and Vandepitte, D., 'Longitudinal stability analysis of an insect-like flapping wing micro aerial vehicle operating at variable forward flight speed', KU Leuven. ( abstract, full paper )
11:00	Askari, M., Ghandchi Tehrani, M., Brusa, E., Carrera, A., and Delprete, C., 'A novel multimodal piezoelectric vibration energy harvester integrated with a practical read-out circuit', University of Groningen. ( abstract, full paper )
11:25	Poleg, Y., Bucher, I., and Minikes, A., 'Experimental method to predict critical buckling pressure of thin wall vessel using acoustic actuation and sensing', Technion. ( abstract, full paper )
11:50	Kras, A., and Gardonio, P., 'Flywheel inertial vibration absorber', Silencions. ( abstract, full paper )

SD4 - Tuesday 10 Sep 2024

14:00	Natali, C., Battarra, M., Dalpiaz, G., and Mucchi, E., 'Tribo-dynamics of balanced vane pumps for automotive applications and experimental validation', University of Ferrara. ( abstract, full paper )
14:25	Lo, Y.-C., and Chan, Y.-J., 'Testing and modelling of nonlinear dynamic behavior of linear guideways', National Chung Hsing University. ( abstract, full paper )
14:50	Shen, X., Devaraja, P., Wagg, D., and Bonney, M., 'Knowledge graphs for digital twins of structural dynamic systems', The Alan Turing Institute. ( abstract, full paper )

SD5 - Wednesday 11 Sep 2024

08:55	Tiseo, B., Rufolo, G. C., Fauci, R., Concilio, A., Di Caprio, F., Scigliano, R., Pisano, F. M., Gardi, R., De Stefano Fumo, M., Fragiacomo, M., Quaranta, V., and Bruno, G., 'Space rider: thermal protection system configuration and body flap development test', CIRA Centro Italiano Ricerche Aerospaziali. ( abstract, full paper )
09:20	Boscia, M., Sbarra, R. G., Coppotelli, G., and Piergentili, F., 'Analysis of the experimental properties of CubeSat-class satellites for the simplification of the launch clearance process', Sapienza University of Rome. ( abstract, full paper )
09:45	Zhang, R., Xia, Y., and Xu, J., 'Experimental investigation of a tuned mass inerter system (TMIS)', Swansea University. ( abstract, full paper )

SD6 - Wednesday 11 Sep 2024

10:35	Adhikari, S., and Jacques, A., 'Mode veering in dynamic systems via inertial coupling', University of Glasgow. ( abstract, full paper )
11:00	Bartfai, A., Laka, I., Munoa, J., and Dombovari, Z., 'Experimental study of low frequency chatter vibrations in robotic milling', Budapest University of Technology and Economics. ( abstract, full paper )
11:25	Rosa, S., Martini, A., Rivola, A., and Troncossi, M., 'Condition monitoring of a broaching machine through machine learning classification of a limited dataset vibration signals', University of Bologna. ( abstract, full paper )

---

Structural health monitoring (Structures)

SHM1 - Monday 9 Sep 2024

13:25	Martinelli, C., Soderqvist, A., and Cammarano, A., 'Using transfer learning in physics informed neural networks for online structural health monitoring', University of Strathclyde. ( abstract, full paper )
13:50	Delo, G., Surace, C., and Worden, K., 'Knowledge sharing for improving damage identification across a population of heterogeneous laboratory-scale aircraft models', Politecnico di Torino. ( abstract, full paper )
14:15	Worden, K., Dardeno, T. A., and Hughes, A. J., 'On the topology and geometry of population-based SHM', University of Sheffield. ( abstract, full paper )
14:40	Salvi, J., and Rinaldi, L., 'Early experiences in monitoring systems for offshore platforms: towards an integrated approach for asset integrity and model updating', Solgeo S.r.l.. ( abstract, full paper )
15:05	van de Velde, M., Vandecruys, E., Verstrynge, E., Reynders, E., and Lombaert, G., 'The influence of pre-existing corrosion damage on vibration-based monitoring during mechanical load-testing of reinforced concrete beams', KU Leuven. ( abstract, full paper )
15:30	Kumar Sharma, J., and Deraemaeker, A., 'Comparative analysis of time-stretching and MWCS techniques for compensation of environmental effects in structural health monitoring of concrete infrastructure', Université Libre de Bruxelles. ( abstract, full paper )

SHM2 - Monday 9 Sep 2024

16:20	Kullaa, J., 'Issues in Damage Detection Using Autocovariance Functions', Metropolia University of Applied Sciences. ( abstract, full paper )
16:45	Belur, M. Y., Kefal, A., Fassois, S. D., and Spiliotopoulos, P., 'Robust full-field modal testing method for structural health monitoring of aerostructures under random noise', Sabanci University. ( abstract, full paper )
17:10	Kakolyris, G., Fassois, S. D., Kefal, A., and Belur, M. Y., 'Random vibration based robust Structural Health Monitoring for a composite wing-shaped structure under temperature uncertainty: an exploratory study', University of Patras. ( abstract, full paper )
17:35	Spiliotopoulos, P. E., Fassois, S. D., and Sakellariou, J. S., 'Vibration data based robust damage detection under unobservable operating conditions via the functional model based method', University of Patras. ( abstract, full paper )

SHM3 - Tuesday 10 Sep 2024

15:40	Konstantinou, X., Kritikakos, K., Lee, C. F., Sakaris, C. S., Sakellariou, J. S., Schlanbusch, R., and Ong, M. C., 'Vibration-based structural health monitoring of the mooring lines in a floating offshore wind turbine under varying environmental conditions: NN vs STS based methods', University of Patras. ( abstract, full paper )
16:05	Deonarain, G., Blough, J., and Labyak, D., 'Defect detection in additively manufactured parts using frequency domain-based correlation criteria', Michigan Technological University. ( abstract, full paper )
16:30	Saramantas, I. E., Sakellariou, J. S., Fassois, S. D., Iliopoulos, I. A., and Serpanos, D. N., 'Sensor fault detection and identification for robust SHM in a population of composite aerostructures under varying excitation and temperature', University of Patras. ( abstract, full paper )
16:55	Severa, L., Milana, S., Roveri, N., Culla, A., and Carcaterra, A., 'Best features extraction for ML-based structural health monitoring', Sapienza University of Rome. ( abstract, full paper )
17:20	Paprocki, C. A., Barnard, A., Dare, T., Cody, K., and Newman, P., 'Acoustic source separation of transient events from background noise', Penn State. ( abstract, full paper )
17:45	Silva, T. A. N., and Amaral, P., 'Data-driven damage assessment using a cloud of spheres algorithm', NOVA FCT - UNIDEMI. ( abstract )

---

Substructuring and Coupling

SC1 - Monday 9 Sep 2024

13:50	Mencik, J.-M., Nikiema, P., and Mbaye, M., 'On the dynamic behavior of bladed disks using wave finite element strategies and model reduction techniques', INSA Centre Val de Loire. ( abstract, full paper )
14:15	Brøns, M., and Trainotti, F., 'A framework for correcting measurement position and directions to improve experimental frequency-based substructuring and hybrid models', Technical University of Denmark. ( abstract, full paper )
14:40	Tincani, S., Delvecchio, S., and Barbieri, M., 'Assessment of a substructuring model and dynamic characterization of anti-vibrating mounts', Robert Bosch GmbH. ( abstract, full paper )
15:05	Zobel, O. M., Trainotti, F., and Rixen, D. J., 'Improving experimental impulse-based substructuring through interface weakening', Technical University of Munich. ( abstract, full paper )
15:30	Richiedei, D., Tamellin, I., and González, F., 'Co-simulation correction in multibody systems through eigenstructure assignment', University of Padova. ( abstract, full paper )

SC2 - Monday 9 Sep 2024

16:20	Herbst, M., 'Comparison of the numerical accuracy of CMS and FBS techniques in FEM calculations', BETA CAE Systems SA. ( abstract, full paper )
16:45	Zucchini, A., Hülsmann, A., and Naets, F., 'On the multi-domain transmissibility evaluation of dynamic structures with reduced-order models through frequency based substructuring', BMW. ( abstract, full paper )
17:10	Moldenhauer, B., Roettgen, D., and Linderholt, A., 'System identification of nonlinear attachments for the dynamic substructuring round robin structure', Sandia National Laboratories. ( abstract, full paper )
17:35	Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Ialonardi, M., 'Evaluation of the configuration-dependent dynamics of a cartesian 3D printer using substructing techniques', Università degli Studi dell'Aquila. ( abstract, full paper )

SC3 - Tuesday 10 Sep 2024

08:30	Fabre, F., Le Carrou, J.-L., and Chomette, B., 'Dynamic substructuring based on the complex Udwadia-Kalaba formalism', Institut Jean Le Rond d'Alembert. ( abstract, full paper )
08:55	Trainotti, F., Zobel, O. M., and Rixen, D. J., 'A comparative analysis of frequency- and impulse-based substructuring for experimental shock response predictions', Technical University of Munich. ( abstract, full paper )
09:20	Di Manno, M., Trainotti, F., Ialonardi, M., Rixen, D. J., and Fregolent, A., 'A combined VPT and SVT approach for decoupling in the presence of inaccessible and deformable interfaces', La Sapienza. ( abstract, full paper )

---

Transfer path analysis

TPA - Wednesday 11 Sep 2024

08:55	Varga, T. F., Gazdagh, Z. G., Szabo, L. L., Bubreg, M., and Fukker, B., 'Experimental modal analysis based TPA method of wiper system linkage vibration amplification', Robert Bosch Kft. ( abstract, full paper )
09:20	Ocepek, D., Trainotti, F., Korbar, J., Rixen, D. J., Boltežar, M., and Čepon, G., 'Exploring and applying sparse regression in admittance-based TPA methods', University of Ljubljana. ( abstract, full paper )
09:45	Rajan, S., and Palanivelu, S., 'Engineering analysis cum assessment of noise and vibration of operator-tractor-field system using operational transfer path analysis', Vellore Institute of Technology, Vellore. ( abstract, full paper )

---

Tuned Vibration Absorbers and Dampers

TVD - Wednesday 11 Sep 2024

13:35	Richiedei, D., Tamellin, I., and Trevisani, A., 'The virtual tuned mass damper for adaptive vibration absorption on a flexible joint robotic arm', University of Padova. ( abstract, full paper )
14:00	Austin, B., and Cheer, J., 'Active control of a tuned vibration absorber for use in metamaterial applications', University of Southampton. ( abstract, full paper )
14:25	Zhang, R., Xu, J., and Xia, Y., 'Experimental investigation of a Tuned Mass Inerter System (TMIS)', Tongji University. ( abstract, full paper )
14:50	Feng, N., Hahn, E. J., and Yu, M., 'On improving the identification of lumped parameter systems with symmetric mass, damping and stiffness matrices', The University of New South Wales. ( abstract, full paper )
15:15	Ortis, L., Gardonio, P., Rustighi, E., Malacarne, C., and Perini, M., 'Vacuum plant for structured fabric TVA', Università degli Studi di Udine. ( abstract, full paper )

---

USD – Applications

USDA - Monday 9 Sep 2024

15:30	Maier, S., Bachmann, F., and Feldmann, R., 'Comparison of neural network-based surrogate model and subset simulation for reliability analysis of components submitted to vibrational loads', BMW AG. ( abstract, full paper )
15:55	Lindbichler, L., Klanner, M., Melito, G. M., and Ellermann, K., 'Determination and sensitivity analysis of optimal control parameters of actively steered wheelsets', Graz University Of Technology. ( abstract, full paper )
16:20	Brizard, D., and Jacquelin, É., 'An examination of the Morris analysis in the context of global sensitivity analysis of car crashworthiness with a toy car model', Université Gustave Eiffel. ( abstract, full paper )
16:45	Lu, H., Farrokhabadi, A., Rauf, A., Talemi, R., Gryllias, K., and Chronopoulos, D., 'Uncertainty quantification for damage detection in 3D printed pure PLA auxetic lattice structure using ultrasonic guided waves and Flipout probabilistic convolutional neural network', Flanders Make @ KU Leuven. ( abstract, full paper )
17:10	Mohan Kumar, M. K., and Platz, R., 'Deterministic and probabilistic comparison of the discrepancy between the numerical simulation and experimental test considering passive and active vibration isolation', Deggendorf Institute of Technology. ( abstract, full paper )
17:35	Sofi, A., and Genovese, F., 'Combined primary-secondary structures under imprecise seismic excitation', Università Mediterranea di Reggio Calabria. ( abstract, full paper )

---

USD – Methods

USDM1 - Tuesday 10 Sep 2024

08:30	Shariatmadar, K., Wang, K., R. Hubbard, C., Hallez, H., and Moens, D., 'An introduction to optimization under uncertainty - survey', KU Leuven. ( abstract, full paper )
08:55	Perrin, G., and Soize, C., 'Reconstruction of random fields concentrated on one-dimensional manifold using irregularly sampled data', Université Gustave Eiffel. ( abstract, full paper )
09:20	Jacquelin, E., Adhikari, S., and Brizard, D., 'Random mode evaluation with polynomial chaos expansion', Université Claude Bernard Lyon 1. ( abstract, full paper )
09:45	Champneys, M. D., and Rogers, T. J., 'An efficient reversible-jump MCMC scheme for model term selection in dynamic systems', University of Sheffield. ( abstract, full paper )

USDM2 - Tuesday 10 Sep 2024

10:35	Könecke, T., and Hanss, M., 'Beyond Precision: The Power of Possibility Theory for Quantifying Imprecise Probabilities', University of Stuttgart. ( abstract )
11:25	Könecke, T., and Hanss, M., 'Exploring possibilistic potentials in uncertainty quantification for modal analysis techniques', University of Stuttgart. ( abstract, full paper )
11:50	Misraji, M. A., Valdebenito, M. A., Zhang, X.-Y., and Faes, M. G. R., 'First excursion probability sensitivity by means of Domain Decomposition Method', TU Dortmund University. ( abstract, full paper )

USDM3 - Tuesday 10 Sep 2024

14:00	M. S. Ribeiro, L. H., Claeys, C., T Fabro, A., Chronopoulos, D., and F. Arruda, J. R., 'Designing phononic crystals robust against mechanical property variability using statistical data from statistical process control', University of Campinas.
14:25	Giro, Y., Le Carrou, J.-L., Vincenti, A., Dartois, S., Viala, R., and Navarret, B., 'Model-based comparison of steel-string acoustic guitars with spruce and composite soundboards', Sorbonne Université.
14:50	Persoons, A., and Moens, D., 'Adaptive Gaussian process regression for robust design optimization using extreme value indicator distribution', Flanders Make @ KU Leuven.
15:15	Cicirello, A., 'Machine learning enabled combined parametric and non-parametric uncertainty in vibro-acoustics', University of Cambridge.

USDM4 - Tuesday 10 Sep 2024

16:05	Aswathy, M., Praveen Krishna, I. R., and Arun, C. O., 'Stochastic meshless methods for free vibration analysis of thin beams, and frames with random material density and Young’s modulus', Indian Institute of Technology Delhi. ( abstract, full paper )
16:30	Pitchforth, D. J., Jones, M. R., and Cross, E. J., 'Physics-informed Gaussian processes - a guide to what physics where?', The University of Sheffield. ( abstract, full paper )
16:55	Manque, N. A., Valdebenito, M. A., Moens, D., and Faes, M. G. R., 'A reduced-order model for interval analysis in linear dynamical systems', TU Dortmund University. ( abstract, full paper )
17:20	Jones, M. R., and Cross, E. J., 'On deriving kernels for linear time-dependent systems', The University of Sheffield. ( abstract, full paper )

---

USD - Uncertainty Identification and Quantification

USDUIQ - Monday 9 Sep 2024

13:50	Petersen, Ø. W., Lourens, E.-M., and Maes, K., 'On the impact of model errors on input and state estimation in structural dynamic systems', NTNU. ( abstract, full paper )
14:15	D’Angelo, L., Cirelli, M., Giannini, O., and Valentini, P. P., 'Fuzzy logic assessment of epistemic uncertainties in pseudo-rigid multibody gear models', Unicusano University - Rome. ( abstract, full paper )
14:40	Gan, I., Fichera, S., Bi, S., and Mottershead, J., 'Experimental results from a model updating study with controlled uncertainty', University of Liverpool. ( abstract, full paper )

Vehicle noise and vibration

NVH1 - Monday 9 Sep 2024

13:25	Wagner, P., Langer, P., Maeder, M., and Marburg, S., 'Quantifying and validating vehicle seat nonlinearities using finite element modelling and experiments', BMW Group. ( abstract )
13:50	Barri, D., Soresini, F., Gobbi, M., Di Gerlando, A., Ballo, F. M., and Mastinu, G., 'Comparison of different electromagnetic forces calculation methods for the analysis of NVH behaviour of electric motors', Politecnico di MIlano. ( abstract, full paper )
14:15	Giovannardi, E., Delvecchio, S., Cavina, N., Colangeli, C., Cornelis, B., and Janssens, K., 'Full vehicle NVH end-of-line testing and data-driven fault detection of a high-performance hybrid vehicle front e-axle', Ferrari S.p.A.. ( abstract, full paper )
14:40	Pizzolante, F., Artiano, A., Di Marcoberardino, S., Meleti, S., Tarabra, M., Battarra, M., and Mucchi, E., 'Dynamic modeling for enhanced acoustic comfort in agricultural machinery: NVH digital twin for tractor pump drive', Università degli studi di Ferrara. ( abstract, full paper )
15:05	Farkas, M., Erdelyi, J. A., and Ha, M. L., 'Automated comparison of product sounds – a digital twin approach to jury testing', Robert Bosch Kft. ( abstract, full paper )

NVH2 - Tuesday 10 Sep 2024

10:35	Chen, X., He, Y., Deng, J., Xu, J., Wu, Z., Wu, J., Yan, W., and Wu, Y., 'The application of locally resonant acoustic metamaterials in automobile low frequency noise reduction', Southwest Jiaotong University. ( abstract, full paper )
11:00	Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Marafini, F., 'Identification of the electromechanical model of a pneumatic positioner for the dynamic actuation of an oscillating platform', Università degli Studi dell'Aquila. ( abstract, full paper )
11:25	Mardini, L., Deckers, E., Claeys, C., and Van Damme, B., 'Improved vibration isolation of 1D chiral phononic crystals with viscoelastic inserts', EMPA. ( abstract, full paper )
11:50	Salamone, N., Bianciardi, F., Colangeli, C., Janssens, K., Van Ophem, S., and Desmet, W., 'Real-time capable models for fast NVH and sound quality optimization of electric vehicles', Siemens Digital Industries Software NV. ( abstract, full paper )

---

Vibro-acoustic modelling and prediction

VAM1 - Monday 9 Sep 2024

13:25	Graham, W. R., 'Theoretical prediction of belt properties for tyre-vibration modelling', University of Cambridge. ( abstract, full paper )
13:50	Tavares, A., Di Lorenzo, E., Cornelis, B., Manzato, S., Peeters, B., Desmet, W., and Gryllias, K., 'An industrial benchmark study of automated modal analysis using density-based clustering techniques', Siemens Digital Industries Software. ( abstract, full paper )
14:15	Levin, S., and Halevi, Y., 'An alternative method for finite dimension models of flexible structures via Padé approximation', Technion and Shenkar. ( abstract, full paper )
14:40	Dubber, K., Waters, T., and Ferguson, N., 'The effects of model reduction on the shock response spectra of multi-modal structures', University of Southampton. ( abstract, full paper )
15:05	Zullo, L., Li, Y., Beriot, H., Berzi, L., and Baldanzini, N., 'Parametric model for emulating absorbing infinite plane in pass-by noise simulations', University of Florence. ( abstract, full paper )
15:30	Oyarzabal, A., Gil-Negrete, N., and Alonso, A., 'Data-based knowledge transfer to improve the accuracy of physical models in digital twins', Universidad de Navarra - Tecnun. ( abstract, full paper )

VAM2 - Tuesday 10 Sep 2024

14:00	Lainer, M., and Müller, G., 'A wave based method for the modeling of two canyons exposed to an oblique incident wave front', Technical University of Munich. ( abstract, full paper )
14:25	Moons, S., Lanoye, R., and Reynders, E., 'A wave-based approach to predict the vibration transmission across junctions with elastic interlayers', KU Leuven. ( abstract, full paper )
14:50	Mariotti, P., Rumpler, R., and Mao, H., 'A modified Bayliss-Turkel absorbing boundary condition for non-spherical truncated boundaries of acoustic problems and fast frequency sweeps', KTH - Royal Institute of Technology. ( abstract, full paper )
15:15	Bizzarri, D., van Ophem, S., Beriot, H., and Atak, O., 'Enhancing Digital Twin Development through Advanced Vibroacoustic Modeling Techniques', Siemens Industry Software NV. ( abstract, full paper )

VAM3 - Tuesday 10 Sep 2024

16:05	Cool, V., Claeys, C., Denayer, H., Naets, F., and Deckers, E., 'Experimental validation technique for near-2D structures towards the sound transmission loss', Flanders Make @ KU Leuven. ( abstract, full paper )
16:30	Duhamel, D., 'Dynamic response of large finite and non-symmetrical two-dimensional periodic structures', Ecole des Ponts ParisTech. ( abstract, full paper )
16:55	Cibrario, L., Gastaldi, C., Cozza, I. F., Credo, G., Saracino, M., Delprete, C., and Scarpa, F., 'A multi-scale homogenization-based approach for dynamic simulation of lattice metamaterials', Politecnico di Torino. ( abstract, full paper )
17:20	Hansen, K., and Sorokin, S. V., 'Frequency dependency of acoustic black hole effect in cylindrical shells', Grundfos A/S. ( abstract, full paper )
17:45	Keys, A., and Cheer, J., 'Optimisation of a modified acoustic black hole profile for the reduction of dynamic stress', University of Southampton. ( abstract, full paper )

VAM4 - Wednesday 11 Sep 2024

08:30	Karpik, A., Cosco, F., and Mundo, D., 'Convergence and comprehensive error analysis of higher-order FE formulations in structural dynamics', University of Calabria. ( abstract, full paper )
08:55	Yoshimura, T., and Hong, J., 'Baseline sensitivity analysis for vibration reduction in mid-frequency range', Tokyo Metropolitan University. ( abstract, full paper )
09:20	Chappell, D. J., 'A superconvergent convolution quadrature method for time-dependent dynamical energy analysis', Nottingham Trent University. ( abstract, full paper )

---

Wind turbine dynamics

WIND - Monday 9 Sep 2024

16:20	Tcherniak, D., Nielsen, S. K., van Beveren, S. C., Berring, P., Semenov, S., and Branner, K., 'Application of virtual sensing to enhance fatigue testing of a 70+ meters wind turbine blade', Hottinger Bruel and Kjaer. ( abstract, full paper )
16:45	Wrzask, K., Tavares, A., Di Lorenzo, E., Branner, K., and Łuczak, M., 'Frequency domain operational modal analysis methods for fatigue damage progression in laboratory tests of wind turbine blade', Gdańsk University of Technology. ( abstract, full paper )
17:10	Gebel, J., Daems, P.-J., Matthys, J. J., Sterckx, J., Vratsinis, K., Kestel, K., Nejad, A. R., and Helsen, J., 'Comparison of modal behaviour in wind turbines based on drivetrain Measurements', NTNU. ( abstract, full paper )
17:35	Castellani, F., and Belcastro, F., 'Wind turbine pitch misalignment detection through tower vibration signal processing', University of Perugia. ( abstract, full paper )
18:00	Becht, P., De Smet, B., Schmidt, S., and Blockmans, B., 'Tonality spread of wind turbines due to production and measurement tolerances', ZF Wind Power. ( abstract, full paper )

---

Poster

POS1 - Monday 9 Sep 2024

13:25	Ali, M. J., and Saeed, Z., 'Optimal Expansion of Interface Degrees of Freedom using System Equivalent Model Mixing', National University of Sciences and Technology (NUST). ( abstract )
13:25	Bauer, B., Papangelo, A., and Habib, G., 'A reduced order approach for race car porpoising', Budapest University of Technology and Economics. ( abstract, full paper )
13:25	Case, J. A., and Barnard, A., 'Impulsive event detection: marine and lacustrine ice fracturing', Penn State. ( abstract, full paper )
13:25	Chaudhary, B., and Tandel, B. N., 'A GIS-based Approach for Mapping of Urban Road Traffic Noise', Sardar Vallabhbhai National Institute of Technology, Surat. ( abstract )
13:25	Dardeno, T. A., Bull, L. A., Dervilis, N., and Worden, K., 'When does a bridge become an aeroplane?', The University of Sheffield. ( abstract, full paper )
13:25	Erdélyi, J. A., Farkas, M., and Fukker, B., 'Self-training anomaly detection in vibrational and acoustic data', Robert Bosch Kft.. ( abstract, full paper )
13:25	Gazdagh, Z. G., Acs, D., Vehovszky, B., and Fukker, B., 'Control of transfer function distortion during RPM-sweep testing of e-drive systems', Robert Bosch Kft. ( abstract, full paper )
13:25	Gergacz, B., Balogh, C. L., and Kimpian, T. A., 'Importance of data quality: an experimental study of passive-side noise in cTPA measurements', Gépészmérnök képzésért alapítvány. ( abstract, full paper )
13:25	Hense, A., Chauvicourt, F., Brughmans, M., van Ophem, S., and Deckers, E., 'Evaluation of machine learning techniques for the NVH design of electric vehicle battery', Siemens Digital Industries Software. ( abstract, full paper )
13:25	Janot, D., Vieux-Champagne, F., Gueguen, P., and Boudaud, C., 'Monitoring and modeling of the vibratory behavior of high-rise timber building', Laboratoire 3SR. ( abstract, full paper )
13:25	Jensen, A. M. D., Schoerghofer-Queiroz, A., Ulriksen, M. D., Tcherniak, D., Damkilde, L., Talasila, P., Larsen, P. G., and Abbiati, G., 'Digital twin as a service for damage prognosis of offshore wind turbine foundations', Aarhus University. ( abstract, full paper )
13:25	Khelifi, A., 'Acoustic Stealth of Armoured Vehicles – Test, Modelling and Parametric Analysis', KNDS. ( abstract )
13:25	Knechten, T., 'On the excitation of a lightweight and low mass structure', Siemens Digital Industries Software. ( abstract, full paper )
13:25	Leanza, A., De Carolis, S., Carbone, G., and Soria, L., 'Enhancing road roughness identification and system observability through measurement strategies in vehicle dynamics', Politecnico di Bari. ( abstract, full paper )
13:25	Montava Belda, I., Segura Alcaraz, J. G., Sanchis Juliá, E., and Gadea Borrell, J. M., 'Acoustic absorption of panels made of agglomerated olive leaves with a polymer matrix', Universitat Politècnica de València. ( abstract, full paper )
13:25	Ota, H., Sato, T., and Niita, S., 'Calculation of excitation forces generated by axial-flow fan system', Tokyo Denki University. ( abstract, full paper )
13:25	Taghipour, J., and H. Biroun, M., 'Dynamics of a cantilever beam under the effect of the water droplet impact', Dyson Institute of Engineering and Technology. ( abstract, full paper )
13:25	Thaller, T., Klanner, M., and Ellermann, K., 'Numerical method for transient analysis of beams with non-linear boundary conditions using a Trefftz-based approach', Graz University of Technology. ( abstract, full paper )
13:25	Tsialiamanis, G., Worden, K., Dervilis, N., and Hughes, A. J., 'Towards an active-learning approach to resource allocation for population-based damage prognosis', University of Sheffield. ( abstract, full paper )

POS2 - Tuesday 10 Sep 2024

08:30	Brunnmayr, F., and Mikota, G., 'Theoretical and experimental modal analysis applied to the arterial system of the human body', Johannes Kepler University. ( abstract, full paper )
08:30	Candelaresi, D., Kosova, G., Annessi, A., Di Lorenzo, E., Martarelli, M., and Castellini, P., 'Cook’s distance-based regression to enhance clustering of metal additive manufactured components through a resonance testing system', Università Politecnica delle Marche, Siemens Digital Industries Software. ( abstract, full paper )
08:30	Cangi, G., Angeletti, A., Baldinucci, M., Palmieri, M., and Cianetti, F., 'A python software development for dynamic simulation of mobile elevating work platform', Universita degli studi di perugia. ( abstract, full paper )
08:30	Chu, Z., Luo, M., Guillet, F., and Andre, H., 'A novel simulation method for encoder signals in IAS monitoring applications', Université Jean Monnet. ( abstract, full paper )
08:30	Deonarain, G., Blough, J., and Labyak, D., 'Effect of testing and analysis parameters on efficiency and sensitivity of FDAC for defect detection', Michigan Technological University. ( abstract, full paper )
08:30	Gabos, Z., and Dombovari, Z., 'A resection algorithm for control-free shaker testing of weakly coupled smooth nonlinear systems', Budapest University of Technology and Economics. ( abstract, full paper )
08:30	Herrera-Leon, N., Godinho, L., Amado-Mendes, P., and Redondo, J., '3D simulation of porous concrete sonic crystals for noise barrier applications', Universidade de Coimbra. ( abstract, full paper )
08:30	Kent, C., O'Higgins, C., Hester, D., Taylor, S., and Woods, R., 'Using readily available SHM data to gain insights into the dynamic behaviour of bridges', Queen's University Belfast. ( abstract, full paper )
08:30	Kumar, S., and Kumar, A., 'Vibration attenuation in AESA radar transmit/receive module via particle damping: an experimental study', IIT Roorkee. ( abstract, full paper )
08:30	León, D. R., Palomares, E., Morales, A. L., Nieto, A. J., Chicharro, J. M., and Pintado, P., 'On the influence of speed and track quality on the comfort index treated as a stochastic variable for railway vehicles', Universidad de Castilla-La Mancha. ( abstract, full paper )
08:30	Lim, S., Woellner, U., and Suglob, A., 'Sensor calibration procedure in high frequency range using laser Doppler vibrometer', Zeiss SMT. ( abstract, full paper )
08:30	Lucchese, A., D'Elia, G., Rubini, R., and Cocconcelli, M., 'Exploiting Non-Gaussian distributions in Hidden Markov Model for bearing prognostics', University of Modena and Reggio Emilia. ( abstract, full paper )
08:30	Mahmud, M., Dirhamsyah, M., Abdullah, S., and Rizal, M., 'THE ANALYSIS OF DESIGN FEATURE WITH VIBRATION SIGNAL FEATURE ON 3D PRINTING MACHINE', Aceh Polytechnic. ( abstract )
08:30	Pandey, P., Barman, S., Haddad Khodaparast, H., Mukhopadhyay, T., Madinei, H., Dey, S., and Friswell, M. I., 'Optimizing mass in mass metamaterials for enhanced energy harvesting: via analytical and machine learning approach', Swansea University. ( abstract, full paper )
08:30	Pandiya, N., 'Modal sub-structuring application to the round robin frame structure', Robert Bosch GmbH. ( abstract, full paper )
08:30	Pierro, E., Grillo, D., and Carbone, G., 'The influence of a static axial preload on the vibrational behaviour of a viscoelastic beam: an experimental assessment', Politecnico di Bari. ( abstract, full paper )
08:30	Rossini, M., De Marco, M., Prodi, N., and Acri, A., 'Sound quality analysis of door and drawer openings on washing machines', Università di Ferrara. ( abstract, full paper )
08:30	Sahana, S., Singh, A., and Bhattacharya, B., 'Variable cross-section metabeams with resonators for enhanced vibration attenuation capabilities', Indian Institute of Technology Kanpur. ( abstract, full paper )
08:30	Shiri, B., Esmaeili, M., and Seyedkazemi, M., 'Experimentally and numerically detection of longitudinal crack in concrete sleeper by modal identification and model updating method', Iran University of Science and Technology. ( abstract )
08:30	Yosifov, S., Bucher, I., Uzhansky, E., and Zinger, Y., 'Controlling spatial and rotational movement of small, acoustically levitated particles by phasing and rotating piezoelectric transducer arrays', Technion – Israel Institute of Technology. ( abstract, full paper )

POS3 - Tuesday 10 Sep 2024

13:35	AlQahtani, N. A., Rogers, T. J., and Sims, N. D., 'GP-NARX for active control of nonlinear flexible structures', The University of Sheffield. ( abstract, full paper )
13:35	Cai, Z., Mao, H., Henriquez, V., and Lucklum, F., 'Study of the effect of load on the vibro-acoustic behavior of Kelvin-cell foam', Technical University of Denmark. ( abstract, full paper )
13:35	Ch. Ullrich, E., Döbler, D., Schmidt, P., and Canberk, C., 'AR-based setup of vibration sensors in test rigs', GFaI e.V.. ( abstract, full paper )
13:35	Corno, M., Becht, P., Blockmans, B., and Naets, F., 'A novel approach for accelerated system-level simulation in wind turbine powertrain testing: analyzing responses to cardan shaft-induced vibrations', Flanders Make @ KU Leuven. ( abstract, full paper )
13:35	Cristofori, G., and Mucchi, E., 'Rattle detection in gearing systems by noise and vibration measurements', University of Ferrara. ( abstract, full paper )
13:35	Cunha, B. s. c., and de Lima, A. M. G., 'Influence of partial treatment on curved plates with viscoelastic sandwich panels in aeroelastic systems using the nonplanar doublet-lattice method under subsonic regime', Federal University of Uberlândia. ( abstract )
13:35	Daga, A. P., Viale, L., Agabiti, D., Fasana, A., and Garibaldi, L., 'Dynamic analysis of metamaterials for industrial applications: numerical predictions and experimental results', Politecnico di Torino. ( abstract, full paper )
13:35	Dhote, V. K., Dutta, G. K., and E, H., 'Dynamic response studies of a typical naval fighter aircraft structure subjected to simulated arrested landing loads', Aeronautical Development Agency. ( abstract )
13:35	El Amli, A., El Yousfi, B., Soualhi, A., and Guillet, F., 'Estimation of gear mesh stiffness in spur gears through finite element model and analytical approach', Jean Monnet university. ( abstract, full paper )
13:35	Fabbri, D., Bruzzone, F., Rosso, C., and Arina, R., 'Methods and applications of computational fluid-structure interaction for nvh problems - a review', Politecnico di Torino. ( abstract, full paper )
13:35	Forrier, B., Bianciardi, F., Elkafafy, M., and Janssens, K., 'Real-time virtual prototype assembly: evaluation of a FIR filter based and a state space model based approach', Siemens Digital Industries Software. ( abstract, full paper )
13:35	Iaffaldano, D., Guida, R., and Carassale, L., 'Estimation of synchronous response of time-variant systems by rotated wavelet probing', Università degli Studi di Genova. ( abstract, full paper )
13:35	Li, P., Zeng, Z., and Ye, M., 'Elastic wave propagation characteristics of periodictrack structure in urban rail transit', Central South University School. ( abstract, full paper )
13:35	Mao, H., Zhao, H., Larsson, J., Yin, B., Rumpler, R., Tibert, G., and Göransson, P., 'Optimization of 3D lattice metastructures based on distorted Kelvin cell for low-frequency vibration suppression', KTH Royal Institute of Technology. ( abstract, full paper )
13:35	Ogbodo, C. O., Rogers, T. J., Dal Borgo, M., and Wagg, D. J., 'Mode indicator guided sequential modal analysis', University of Sheffield. ( abstract, full paper )
13:35	Preston, O. H. L., Rogers, T. J., and Worden, K., 'Using higher-order frequency response functions from NARX models to support activation function choices', The University of Sheffield. ( abstract, full paper )
13:35	Seifert, A., and Hetzler, H., 'Numerical detection of frequency locking of quasi-periodic solutions', University of Kassel. ( abstract, full paper )
13:35	Vrtač, T., Ocepek, D., Boltežar, M., and Čepon, G., 'A hybrid modeling strategy for training data generation in machine learning-based structural health monitoring', University of Ljubljana. ( abstract, full paper )
13:35	Wang, H., Van Belle, L., and Naets, F., 'Model-based noise and vibration analysis of electric vehicle E-motor and gearbox', Flanders Make @ KU Leuven. ( abstract, full paper )
13:35	Zulawinski, W., Kuzio, D., Zimroz, R., and Wylomanska, A., 'New health indicator based on robust spectral coherence maps for prognosis of degradation process in highly impulsive environment', Wroclaw University of Science and Technology. ( abstract, full paper )

POS4 - Wednesday 11 Sep 2024

08:30	Altshul, G., Guskov, M., Balmes, E., and Lorong, P., 'Milling robot modal analysis using spindle-driven unbalanced excitation in context of its response nonlinearity', PIMM. ( abstract, full paper )
08:30	Boukadia, R. F., Pillot, Y., Deckers, E., and Desmet, W., 'Quantifying the impact of variability on locally resonant metamaterial performance through reduced order modeling', Flanders Make @ KU Leuven. ( abstract, full paper )
08:30	Bouras, A., and Carassale, L., 'Analytic derivatives of finite element matrices with respect to geometry', Università di Genova. ( abstract, full paper )
08:30	Depaola, M., De Gregoriis, D., Jouan, G., Bornoff, R., Atak, O., Vandevelde, B., and Moens, D., 'Thermal virtual sensing for electronic components and systems: exploring the robustness of Kalman filtering', Siemens. ( abstract, full paper )
08:30	Faraj, R., Mikułowski, G., Wiszowaty, R., and Graczykowski, C., 'Adaptive mitigation of unknown dynamic excitation using pneumatic damper with proportional piezoelectric valve', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )
08:30	Gioviti, P., Martini, A., Naets, F., Rivola, A., and Troncossi, M., 'An iterative procedure to integrate elastodynamic simulations and virtual commissioning of mechatronic systems: a machine tool case-study', University of Bologna. ( abstract, full paper )
08:30	Gungl, S., Horváth, K., and Kimpián, T. A., 'Applications of phase-based motion magnification in vibration analysis of steering systems', thyssenkrupp Components Technology Hungary Ltd.. ( abstract, full paper )
08:30	Hughes, A., Worden, K., Dervilis, N., and Rogers, T., 'Cost-informed dimensionality reduction for structural digital twin technologies', The University of Sheffield. ( abstract, full paper )
08:30	Janssen, S., Schimidt, C. S., de Oliveira, L. P. R., De Marqui Junior, C., Claeys, C., and Deckers, E., 'On the stop band adaptivity range of locally resonant metamaterial resonators with piezoelectric patches: a case study', Flanders Make @ KU Leuven. ( abstract, full paper )
08:30	Jiang, J., and Xiong, Y., 'Dynamic topology optimization of arbitrarily-shaped 3D structures using a newly developed numerical framework in ABAQUS environment', University of Southampton. ( abstract, full paper )
08:30	Lakra, A. M., and Radhika, B., 'Vibration based identification of breathing cracks using time frequency analysis', NIT Calicut. ( abstract, full paper )
08:30	Leitch, H., Yuan, J., and Stodieck, O., 'Nonlinear aeroelastic analysis of continuous tow sheared composite wings', University of Strathclyde. ( abstract )
08:30	Li, P., Zhao, Y. G., Dang, C., Broggi, M., Valdebenito, M. A., and Faes, M. G. R., 'Bayesian updating of conditional failure probability using method of moments', TU Dortmund. ( abstract, full paper )
08:30	Occhipinti, S., Mastrodicasa, D., Manzato, S., and Di Lorenzo, E., 'Application of digital image correlation in operational modal analysis of rotating structures', Politecnico di Torino. ( abstract, full paper )
08:30	Papatheou, E., Manson, G., Battu, R. S., Worden, K., and Tsialiamanis, G., 'On the use of synthetic data for SHM: a short investigation on a laboratory structure', University of Exeter. ( abstract, full paper )
08:30	Roberjot, J., Sadoulet-Reboul, E., Chevallier, G., Peyret, N., Jaboviste, K., Arnould, C., Collard, E., and Bachy, E., 'Tunable suspension stiffness through thermally controlled polymers', Femto-st / Thales LAS. ( abstract, full paper )
08:30	Saletti, G., Battiato, G., and Zucca, S., 'Coupled Harmonic Balance based approach for the non-linear dynamics of spur gear systems', Politecnico di Torino. ( abstract )
08:30	Si, Y., Zhu, Y., Kutz, J. N., and Cheng, L., 'Data-driven approaches in modal analysis of building structures', University of Groningen. ( abstract, full paper )
08:30	Yorke, R., Garvey, S. D., and Amoozgar, M., 'Managing peak response as a rotor accelerates through a 'follower critical speed'', University of Nottingham. ( abstract, full paper )
08:30	Zucca, G., Palmieri, M., Braccesi, C., and Cianetti, F., 'On the probability density function of rainflow stress range for sine on random processes', Aeronautical and Space Test Division. ( abstract, full paper )