Detailed technical programme: papers per session

An overview of the presented papers per thematic session can be found below. The author in bold is the submission's presenting author and the full paper can be downloaded via the according link.

The final proceedings merged in 1 file are available here.

---

Keynote

KEY - Monday 12 Sep 2022

10:00	Arruda, J. R. F., 'Manipulating elastic waves aiming at reducing vibration and noise: band gaps, metamaterials, and topological modes', University of Campinas. ( abstract, full paper )
10:45	Peeters, J., Schmidt, S., and Verellen, M., 'Empowering a sustainable future with continuous innovation in wind turbine powertrains', ZF Wind Power. ( abstract, full paper )

---

Acoustic testing

AT - Wednesday 14 Sep 2022

08:30	Deuschle, F., Cornelis, B., Lanslots, J., and Gryllias, K., 'Overload detection in MEMS microphones-based acoustic arrays', Siemens Digital Industries Software. ( abstract, full paper )
08:55	Talik, S., Claeys, M., Lambelin, J.-P., and Sinou, J.-J., 'Nonlinear vibration response of an aerospace structure to acoustic loading: experiments and simulations', CEA. ( abstract, full paper )
09:20	van Dijk, C. C., 'Attenuation evaluation, difference between theory and practice', ESC. ( abstract, full paper )

---

Active vibration control

AVC1 - Monday 12 Sep 2022

13:25	Piron, D., Deraemaeker, A., and Collette, C., 'Determination of optimal sensor-actuator position for active vibration damping in collocated SISO systems using a pole-zero distance criterion for fast convergence of the search algorithm', Université Libre de Bruxelles. ( abstract, full paper )
13:50	Zhao, G., Qiao, M., Cai, B., Zhang, Z., Yi, Z., and Lian, J., 'Active vibration damping using force feedback for multimodal vibration mitigation', Sun Yat-sen University. ( abstract, full paper )
14:15	Mokrani, B., 'Active vibration isolation with positive position feedback', ASML. ( abstract )
14:40	Ozsoy, M., Sims, N. D., and Ozturk, E., 'Improving chatter stability of flexible structure milling in robotic assisted machining', The University of Sheffield. ( abstract, full paper )

AVC2 - Tuesday 13 Sep 2022

13:35	Dietrich, J., Raze, G., Collette, C., Deraemaeker, A., and Kerschen, G., 'Resistive-inductive piezoelectric shunts with negative capacitances and positive position feedback - a comparative study', Université de Liège. ( abstract, full paper )
14:00	Zimmer, M., Mehrkian, B., Altay, O., and Abel, D., 'Experimental validation of real-time vibration frequency estimation for structural vibration control', Institute of Automatic Control. ( abstract, full paper )
14:25	Van Damme, B., Manunta, C., Weber, R., Spierings, A., and Bergamini, A., 'Tunable dynamic stiffness of truss structures with embedded resonant piezo shunts', Empa. ( abstract, full paper )
14:50	Berkhoff, A. P., and Haasjes, R., 'Active noise control using a modified filtered-error algorithm with frequency domain decoupling', University of Twente. ( abstract, full paper )
15:15	Teoh, J. Q., Ghandchi Tehrani, M., Ferguson, N. S., and Elliott, S. J., 'Investigation of robustness on pole-placement by the receptance method', University of Southampton. ( abstract, full paper )

AVC3 - Wednesday 14 Sep 2022

13:35	Mikułowski, G., 'Switching stiffness approach on a semi-active pneumatic actuator dedicated to vibration isolation', IPPT PAN. ( abstract, full paper )
14:00	Mesbahi, S., Milana, S., Culla, A., Pepe, G., Roveri, N., and Carcaterra, A., 'PWM control of semi-active dampers', University of Rome La Sapienza. ( abstract, full paper )
14:25	Jalšić, M., Alujević, N., Arandia-Krešić, S., and Ćatipović, I., 'Two active metamaterial cells for nonreciprocal vibration transmission', University of Zagreb. ( abstract, full paper )
14:50	Antonelli, M. G. E., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Latini, F., 'Multi-physics modeling of an active seat suspension with pneumatic or hydraulic actuation', Università dell'Aquila. ( abstract, full paper )

---

Aero-elasticity

AE - Monday 12 Sep 2022

13:25	Abdallah, I., Duthé, G., and Chatzi, E., 'Detecting damage via aeorodynamic quantities on an aeroelastic structure', ETH Zurich. ( abstract )
13:50	Volkmar, R., Soal, K., Govers, Y., and Böswald, M., 'Optimization of time and frequency domain methods for real-time modal parameter identification of aircraft', German Aerospace Center (DLR). ( abstract, full paper )
14:15	De Troyer, T., Csurcsia, P. Z., Siddiqui, M. F., and Runacres, M. C., 'Using a broadband multisine excitation signal for the data-driven modeling of the unsteady lift force on a pitching wing', Vrije Universiteit Brussel. ( abstract, full paper )
14:40	Natili, F., Castellani, F., Khedr, A., Vedovelli, M., and Astolfi, D., 'Aeroelastic analysis of a single-axis photovoltaic panel through scaled wind tunnel tests and mathematical modeling', Università degli Studi di Perugia. ( abstract, full paper )
15:05	Soal, K., Nagy, M., Teubl, D., Volkmar, R., Thiem, C., Meddaikar, M. Y., Vanek, B., Govers, Y., and Böswald, M., 'Hardware-in-the-loop testing of a miniaturized real time flutter monitoring system for UAVs', German Aerospace Center DLR. ( abstract, full paper )

---

Aeroacoustics and flow noise

AA - Wednesday 14 Sep 2022

10:10	Van Genechten, B., Kucukcoskun, K., Zarri, A., and Schram, C., 'Urban noise footprint of a multicopter drone', Siemens Digital Industries Software. ( abstract, full paper )
10:35	Sinha, A., Desceliers, C., Soize, C., and Cunha, G., 'Probabilistic learning on manifolds for design optimisation of aero-acoustic liner impedance', University Gustave Eiffel. ( abstract, full paper )
11:00	Khoshavaz, S., Denayer, H., and De Roeck, W., 'Mapping schemes between non matching meshes for aerodynamic and acoustic forces acting on a flexible duct wall', Flanders Make@KU Leuven. ( abstract, full paper )
11:25	Ulveczki, M. Á., and Rucz, P., 'Simulations of flow-excited acoustical resonances in a Helmholtz resonator', Budapest University of Technology and Economics. ( abstract, full paper )
11:50	Aulitto, A., Cierco Molins, E., Åbom, M., Kohrs, T., Lopez Arteaga, I., and Passato, D., 'Noise control in HVAC systems with ultra-thin low-frequency (UTLF) absorbers', Eindhoven University of Technology. ( abstract, full paper )

---

Characterisation, design and optimisation of acoustic materials

CAM1 - Tuesday 13 Sep 2022

08:30	Opiela, K. C., Zieliński, T. G., and Attenborough, K., 'Predicting sound absorption in additively manufactured microporous labyrinthine structures', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )
08:55	Semeniuk, B. P., and Göransson, P., 'A constitutive model for the acoustics of packed spheres and particles', KTH Royal Institute of Technology. ( abstract, full paper )
09:20	Trinh, V. H., Guilleminot, J., Perrot, C., and Vu, V. D., 'Learning acoustic responses from experiments: A multiscale-informed transfer learning approach', Gustave Eiffel University. ( abstract )

CAM2 - Wednesday 14 Sep 2022

10:35	Lundberg, E., Mao, H., Gaborit, M., Rumpler, R., Semeniuk, B. P., and Göransson, P., 'Tuning sound transmission loss for multi-layer panels with aniso-tropic foams', KTH Royal Institute of Technology, Dept Technical Mechanics, MWL. ( abstract, full paper )
11:00	Ciochon, A., Kennedy, J., and Culleton, M., 'Evaluation of surface roughness effects on additively manufactured acoustic materials', Trinity College Dublin. ( abstract, full paper )
11:25	Wu, S., Dazel, O., and Legrain, G., 'Generalized computational framework based on X-FEM for thin films in time-harmonic problems: formulation, validation and application', CNRS UMR6613 LAUM. ( abstract, full paper )
11:50	Zielinski, T. G., Dauchez, N., Boutin, T., Chevillotte, F., Bécot, F.-X., and Venegas, R., '3D printed axisymmetric sound absorber with double porosity', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )

---

Condition monitoring

CM1 - Tuesday 13 Sep 2022

08:30	Kestel, K., Peeters, C., Antoni, J., Leclère, Q., Girardin, F., Brijder, R., and Helsen, J., 'Generalized likelihood ratio-based condition indicator maximization via Rayleigh quotient iteration', Vrije Universiteit Brussel. ( abstract, full paper )
08:55	Caesarendra, W., Surindra, M. D., Putra, S. A., and Zaini, J., 'Vibration signal characterization of Underpass Bridge using time-frequency representation method for condition-based maintenance purpose', Universiti Brunei Darussalam. ( abstract, full paper )
09:20	Troncossi, M., Rosa, S., Rivola, A., and Martini, A., 'Vibration monitoring for the detection of tool failure in broaching machines', University of Bologna. ( abstract, full paper )

CM2 - Wednesday 14 Sep 2022

10:35	Dimopoulos, V., and Deckers, E., 'Complex group lasso and adaptive complex group lasso for sparse damage detection', Flanders Make@KU Leuven. ( abstract, full paper )
11:00	Wodecki, J., Shiri, H., Siami, M., and Zimroz, R., 'Acoustic-based diagnostics of belt conveyor idlers in real-life mining conditions by mobile inspection robot', Wroclaw University of Science and Technology. ( abstract, full paper )
11:25	Dreisbach, A.-L., and Fritzen, C.-P., 'A novel approach for vibration-based preload-monitoring using electro-mechanical impedance spectra and probability of detection', University of Siegen. ( abstract, full paper )
11:50	Antoni, J., Smith, W., and Randall, R. B., 'On the design of informative decompositions', INSA Lyon. ( abstract, full paper )

---

Condition monitoring of rotating machinery

CMRM1 - Monday 12 Sep 2022

15:30	Mauricio, A., Denayer, H., and Gryllias, K., 'Time-domain beamformed envelope spectrum of acoustic signals for bearing diagnostics', Flanders Make@KU Leuven. ( abstract, full paper )
15:55	Smith, W. A., Borghesani, P., Abboud, D., Randall, R. B., Antoni, J., El Badaoui, M., and Peng, Z., 'A new look at bearing signal models', University of New South Wales. ( abstract, full paper )
16:20	Mousmoulis, G., Anagnostopoulos, I., Aggidis, G., and Gryllias, K., 'Evaluation of vibration based cyclostationary indicators for cavitation detection in hydraulic turbomachines', Flanders Make@KU Leuven. ( abstract, full paper )
16:45	Bertoni, R., and André, H., 'IAS Diagnosis based on a BEAring Frequency estimation Method (BEAFEM)', Vibratec. ( abstract, full paper )
17:10	Peeters, C., Jakobsson, A., Antoni, J., and Helsen, J., 'The short-time iterative adaptive approach: an effective analysis tool for complex non-stationary vibrations', Vrije Universiteit Brussel. ( abstract, full paper )
17:35	Zhu, R., Mousmoulis, G., and Gryllias, K., 'An enhanced wavelet-based instantaneous feature for local damage diagnosis of gears', Flanders Make@KU Leuven. ( abstract, full paper )
18:00	Ohana, R. J., Klein, R., Bortman, J., and Tur, M., 'A strain model for spall severity estimation based on FBG measurements', Ben-Gurion University of the Negev. ( abstract, full paper )

CMRM2 - Tuesday 13 Sep 2022

15:40	Marx, D., Liu, C., Antoni, J., and Gryllias, K., 'Deep learning implementations of cyclo-stationary signal processing methods', Flanders Make@KU Leuven. ( abstract, full paper )
16:05	Ngandu Kalala, G., Chiementin, X., Rasolofondraibe, L., and Boujelben, A., 'Strategy for diagnosing gear defects by digital twin-assisted supervised classification on a ball mill drivetrain', Université de Reims Champagne Ardenne. ( abstract, full paper )
16:30	Soave, E., D'Elia, G., Dalpiaz, G., and Mucchi, E., 'Parameter estimation algorithm for bearing prognostics through monovariate generalized Gaussian Hidden Markov Models', University of Ferrara. ( abstract, full paper )
16:55	Mottola, G., Grosso, P., Fonte, C., Strozzi, M., Rubini, R., and Cocconcelli, M., 'Modal analysis and condition monitoring for an electric motor through MEMS accelerometers', University of Modena and Reggio Emilia. ( abstract, full paper )
17:20	Yazdanianasr, M., Mauricio, A., Zimroz, R., Wyłomańska, A., and Gryllias, K., 'Evaluation of the improved envelope spectrum via feature optimization-gram (IESFOgram) for bearing diagnostics in presence of non Gaussian noise', Flanders Make@KU Leuven. ( abstract, full paper )
17:45	Matania, O., Klein, R., and Bortman, J., 'Estimation of the transfer function in rotating machinery with high instantaneous speed fluctuations', Ben-Gurion University of the Negev. ( abstract, full paper )

---

Contact dynamics

CON - Wednesday 14 Sep 2022

10:10	Li, G.-S., Lo, Y.-C., Chiou, S.-J., and Chan, Y.-J., 'Quantitative visual identification of contact conditions of receding contact', National Chung Hsing University. ( abstract, full paper )
10:35	Felicetti, L., Chatelet, E., Latour, A., and Massi, F., 'Analysis and mimicking of contact vibrations, induced by touching isotropic surface textures', University of Rome La Sapienza. ( abstract, full paper )
11:00	Chatelet, E., Liva, A., and Massi, F., 'Energy transfer between acoustic fields by dry frictional contacts for SHM: Optimization of the high frequency vibration transfer', LAMCOS. ( abstract, full paper )
11:25	Shaw, A. D., Gatti, G., Gonçalves, P. J. P., and Brennan, M., 'Frictional phenomena within a quasi zero stiffness vibration absorber', Swansea University. ( abstract, full paper )
11:50	Ciprari, S., Tonazzi, D., Lazzari, A., Saulot, A., and Massi, F., 'Identification of dynamic contact instabilities generated by braking materials', University of Rome La Sapienza. ( abstract, full paper )

---

Damping

D1 - Monday 12 Sep 2022

13:25	Harduf, Y., Setter, E., Feldman, M., and Bucher, I., 'A simple model for the damping properties of additively manufactured particle dampers', Technion - Israel Institute of Technology. ( abstract, full paper )
13:50	Klanner, M., and Ellermann, K., 'Transient vibrations of viscoelastic beam systems under arbitrary loading conditions and with fractional derivative damping models', Graz University of Technology. ( abstract, full paper )
14:15	D'Imperio, S., Berruti, T. M., Gastaldi, C., and Soccio, P., 'Design of a dynamic damper for a high precision numerical control machine', Politecnico di Torino. ( abstract, full paper )
14:40	Tornar, U., 'S.I.D. (Strain Integral Damping) comparisons with measurement and imaginary stiffness damping', Peugeot (retired). ( abstract, full paper )
15:05	Guerich, M., and Assaf, S., 'Damping optimal design of sandwich beams partially covered with damping patches', Léonard de Vinci Pôle Universitaire, Research Center. ( abstract, full paper )

D2 - Tuesday 13 Sep 2022

10:10	Manayil Santhosh, B., Tufekci, M., Salles, L., Scarpa, F., and Yuan, J., 'Flutter mitigation of turbofan fan blades using viscoelastic patches', University of Strathclyde. ( abstract, full paper )
10:35	Feng, N., Hahn, E., and Yu, M., 'Different approaches to identifying damped foundations in rotating machinery', The University of New South Wales. ( abstract, full paper )
11:00	Rouleau, L., Lossouarn, B., and Deü, J.-F., 'Efficient design of viscoelastic damping treatments', Conservatoire national des arts et métiers. ( abstract, full paper )
11:25	Käß, M., Schmidt, H., Hülsebrock, M., and Lichtinger, R., 'Effect of ambient temperature variation on solder joint reliability under harmonic vibration loading', BMW AG. ( abstract, full paper )
11:50	Zara, G., Ferhatoglu, E., Berruti, T. M., and Zucca, S., 'Multiple response levels of structures with wedge friction dampers', Politecnico di Torino. ( abstract, full paper )

D3 - Tuesday 13 Sep 2022

13:35	Hermann, S., Butaud, P., and Chevallier, G., 'Vibration damping based on magnetically-induced friction dissipation', FEMTO-ST Institute. ( abstract, full paper )
14:25	Rosenboom, M., and Hetzler, H., 'Nonlinear eddy current damping device with adjustable damping properties', University of Kassel. ( abstract, full paper )
14:50	Hasheminejad, N., Vuye, C., and Vanlanduit, S., 'Identification of the viscoelastic properties of bituminous mortar using vibration measurements', University of Antwerp. ( abstract, full paper )

---

Dynamic testing: methods and instrumentation

DT1 - Tuesday 13 Sep 2022

08:30	Amorosi, A., Amez-Droz, L., Teloi, M., Lakkis, M. H., Ding, B., Watchi, J., Sider, A., Di Fronzo, C., Jamshidi, R., Lambert, P., and Collette, C., 'High resolution compact vertical inertial sensor for atomic quantum gravimeter hybridizing', Université de Liège. ( abstract, full paper )
08:55	MacDonell, J., Chu, A., and de Cordemoy, P., 'Lessons learned from the advancements of shock sensors and their application in product testing', PCB Piezotronics. ( abstract, full paper )
09:20	Tcherniak, D., 'Optimal Sensor Placement: a sensor density approach', Hottinger Brüel & Kjær A/S. ( abstract, full paper )
09:45	Kemmler, S., Kreuter, D., and Westmeier, T., 'Accelerated vibration testing: implementation of soft sensors for shaker profile derivation', Robert Bosch GmbH. ( abstract, full paper )

DT2 - Tuesday 13 Sep 2022

10:35	Pinto, M., Pepe, G., Roveri, N., Culla, A., and Carcaterra, A., 'Mobile self-driving sensors for identification of vibration and acoustic fields', University of Rome La Sapienza. ( abstract, full paper )
11:00	Troge, J., Georgi, T., Hensel, E., de Klerk, D., Graf, M., and Burkhardt, M., 'Characterization of 3D printed polymer mounts in translational and rotational DOF', Fraunhofer Institute for Machine Tools and Forming Technology IWU. ( abstract, full paper )
11:25	Schedlinski, C., and Jaenich, W., 'Identification of the damped harmonic oscillator frequency response function from base acceleration and interface force', ICS Engineering GmbH. ( abstract, full paper )
11:50	Baruch, E., and Bucher, I., 'Nanoscale topography approximation using an autoresonating nanowire', Technion. ( abstract, full paper )

DT3 - Wednesday 14 Sep 2022

13:35	Inozume, T., Ogasawara, T., Saitoh, H., and Hosoya, N., 'Impulse testing with a combustion actuator for huge structures', Shibaura Institute of Technology. ( abstract, full paper )
14:00	Cristofori, G., Mucchi, E., Santoni, A., and Pompoli, F., 'Experimental evaluation of the sound power level (SWL) in a gearmotor by means of vibration measurements', University of Ferrara. ( abstract, full paper )
14:25	Pandiya, N., and Desmet, W., 'Automated pole selection using the DERRP methodology', KU Leuven/Robert Bosch GmbH. ( abstract, full paper )
14:50	Peeters, B., Csurcsia, P. Z., and ElKafafy, M., 'Advanced frequency response matrix estimation using very short measurements', Siemens Digital Industries Software. ( abstract, full paper )
15:15	Cronin, L., Sen, D., and Pakzad, S. N., 'Field implementation of mobile sensing-based bridge system identification paradigms', Lehigh University. ( abstract, full paper )
15:40	Devos, T., Kennes, L., Viehweger, M., Kirchner, M., Croes, J., and Naets, F., 'Sensor selection for state estimators based on the estimation performance of predefined quantities of interest', KU Leuven. ( abstract, full paper )

---

Dynamics of Joints

JOINT - Monday 12 Sep 2022

15:30	Pandey, P., Khodaparast, H. H., Friswell, M. I., Chatterjee, T., and Deighan, T., 'Stochastic model updating for parameter identification using Bayesian inference', Swansea University. ( abstract, full paper )
15:55	Brøns, M., 'Estimating bolt tightness in non-slender bolts from vibrations', Technical University of Denmark. ( abstract, full paper )
16:20	Witteveen, W., and Koller, L., 'Potential of virtual tribomechadynamics', FH OÖ F&E GesmbH. ( abstract, full paper )
16:45	Jamia, N., Jalali, H., Bonney, M. S., Mills, R. S., Friswell, M. I., Khodaparast, H. H., Taghipour, J., and Shaw, A. D., 'Numerical and experimental investigations of frictional contact interface using a modified Valanis model', Swansea University. ( abstract, full paper )
17:10	Zhai, Y.-J., Ma, Z.-S., Ding, Q., and Wang, X.-P., 'Dynamic modeling of a jointed structure with two hinged-hinged slightly curved beams connected by elastic joints', Tianjin University. ( abstract, full paper )
17:35	Allen, H. G., and Langley, R. S., 'A linearised hybrid FE-SEA method for built-up structures with nonlinear joints under random loading', University of Cambridge. ( abstract, full paper )
18:00	Porter, J. H., Brake, M. R. W., and Karpov, N. M., 'Reconciling real hysteresis with the Masing conditions via Masing manifolds', Rice University. ( abstract, full paper )

---

Dynamics of civil structures

CIV1 - Tuesday 13 Sep 2022

10:35	Güner, H., Verstraelen, E., Purpura, L., Hoffait, S., and Denoël, V., 'Dynamic identification of lightweight civil engineering structures using a portable shaker', V2i. ( abstract, full paper )
11:00	Edirisinghe, T. L., and Talbot, J. P., 'Some observations on the transmission of ground-borne vibration into base-isolated buildings', University of Cambridge. ( abstract, full paper )
11:25	Pinazo, B., Lázaro, C., Monleón, S., and Museros, P., 'Sensitivity of dynamic response to different structural configurations for Hyperloop(TM) transportation systems', Universitat Politècnica de València. ( abstract, full paper )
11:50	Clavelo, B. J., Martín, P., Maes, K., Elena, V., and Lombaert, G., 'Preliminary studies for model-based system inversion of a 80 m tall guyed mast under dynamic wind loads', KU Leuven. ( abstract, full paper )

CIV2 - Wednesday 14 Sep 2022

13:35	Moretti, D., Bronkhorst, A. J., and Geurts, C. P. W., 'Identification of structural parameters of a high-rise building', TNO. ( abstract, full paper )
14:00	Kumawat, A., Taddei, F., Csuka, A., Cudmani, R., and Müller, G., 'Response analysis of low-rise buildings under micro-seismic events induced by geothermal operations', TU Munich. ( abstract, full paper )
14:25	Weil, M., Bel-Hadj, Y., Fernandes, A., Weijtjens, W., and Devriendt, C., 'Experimental and operational modal analysis of a bio-composite pedestrian bridge', VUB. ( abstract, full paper )
14:50	Petersen, Ø. W., Øiseth, O., and Lourens, E.-M., 'Wind load estimation on bridges using latent force models enriched with environmental data', NTNU. ( abstract, full paper )
15:15	Belmokhtar, M., Bonnot, A., Schmidt, F., Chevalier, C., and Ture Savadkoohi, A., 'Revisited frequency domain decomposition for vibration monitoring of a bridge subjected to scour', Université Gustave Eiffel. ( abstract, full paper )

---

Dynamics of rotating machinery

RMD1 - Monday 12 Sep 2022

13:25	Denis, S., Hoffait, S., Ligot, J., Lengele, M., Mahy, P., de Cazenove, J., and Golinval, J.-C., 'Development of an autonomous experimental system to identify blisk mistuning', V2i. ( abstract, full paper )
13:50	Remond, D., Chesne, S., and Paillot, G., 'Mitigation of torsional vibrations and rotational irregularities in an automotive crankshaft application', INSA Lyon. ( abstract, full paper )
14:15	Ćatipović, I., Alujević, N., Senjanović, I., Čakmak, D., and Vladimir, N., 'A finite strip for free vibration analysis of rotating cylindrical shells under internal pressure', University of Zagreb. ( abstract, full paper )
14:40	Gabrielli, A., Battarra, M., and Mucchi, E., 'A numerical finite-element method for radial bearing stiffness estimation based on load dependent meshing', University of Ferrara. ( abstract, full paper )
15:05	Quinz, G., Klanner, M., and Ellermann, K., 'Balancing of rotor-bearing systems without trial runs using the Numerical Assembly Technique - An experimental investigation', Graz University of Technology. ( abstract, full paper )

RMD2 - Tuesday 13 Sep 2022

13:35	Lifshitz, A., Bucher, I., and Tresser, S., 'Identification of rotating structures using autoresonance', Technion. ( abstract, full paper )
14:00	Stajuda, M., Garcia Cava, D., and Liskiewicz, G., 'Statistically enhanced classification of centrifugal compressor operating conditions', School of Engineering, University of Edinburgh. ( abstract, full paper )
14:25	Moczko, P., Odyjas, P., Pietrusiak, D., and Więckowski, J. S., 'Variable geometry centrifugal fan - challenges in identification and control of dynamics', Wroclaw University of Science and Technology. ( abstract, full paper )
14:50	Hermanns, M., Rothe, S., Hetzler, H., Baeuerle, S., Eulert, S., and Luehrs, G.-F., 'Multi-objective optimization of the bearing system design for an electric powertrain based on a data science approach', Volkswagen AG. ( abstract, full paper )
15:15	Lanting, J., Cuypers, C., Timmermans, S., De Munter, W., Delabie, T., and Vandepitte, D., 'Micro-vibration mitigation measures in a small satellite reaction wheel: design and verification', KU Leuven. ( abstract, full paper )

---

ECODRIVE ITN - special session

ECO1 - Tuesday 13 Sep 2022

13:35	Dias, R. S. O., Martarelli, M., and Chiariotti, P., 'State-space domain virtual point transformation for state-space identification in dynamic substructuring', Università Politecnica delle Marche. ( abstract, full paper )
14:00	Kottakota, K., Antoni, J., Leclère, Q., Bouley, S., and Colangeli, C., 'Localization of non-stationary tonal sources through order-based beamforming', MicrodB. ( abstract, full paper )
14:25	Mazzanti, L., Vivet, M., De Gregoriis, D., Tamarozzi, T., and Blockmans, B., 'Contact parameter estimation using a constrained Extended Kalman Filter', Siemens Digital Industries Software. ( abstract, full paper )
14:50	Prakash, V., Sauvage, O., Antoni, J., and Gagliardini, L., 'Bayesian NVH metamodels to assess interior cabin noise using measurement databases', Stellantis N.V. ( abstract, full paper )
15:15	Albezzawy, M. N., Antoni, J., and Leclère, Q., 'The maximally-coherent reference technique: a solution to deal with large sets of references', INSA Lyon. ( abstract, full paper )

ECO2 - Tuesday 13 Sep 2022

16:05	Zucchini, A., Naets, F., and Hülsmann, A., 'Comparison of free-free and fixed boundary conditions for non-linear rubber mount characterization', BMW Group. ( abstract, full paper )
16:30	Mathew, S. K., Bourdon, A., and Remond, D., 'Angular modeling of a rotating machine: Application to study the dynamic behavior of a electric powertrain in nonstationary conditions', INSA Lyon. ( abstract, full paper )
16:55	Salamone, N., Bianciardi, F., Colangeli, C., Janssens, K., and Desmet, W., 'A component-based sound synthesis approach for the subjective NVH assessment of the virtual prototype assembly of an electric vehicle', Siemens Digital Industries Software. ( abstract, full paper )
17:20	Staiger, J., and Naets, F., 'Utilizing gyroscopes for force identification in structural dynamics using Kalman filters', Flanders Make@KU Leuven. ( abstract, full paper )

---

Executable digital twin - special session

XDT - Monday 12 Sep 2022

15:30	Van der Auweraer, H., and Hartmann, D., 'The executable digital twin: merging the digital and the physics worlds', Siemens Digital Industries Software. ( abstract, full paper )
16:20	Liu, C., Pluymers, B., Desmet, W., and Gryllias, K., 'A digital twin-assisted deep learning model for rolling element bearing prognostics', Flanders Make@KU Leuven. ( abstract, full paper )
16:45	Heinrich, C., Khalil, M., and Malik, V., 'Virtual sensing based on executable digital twins in rotary machinery', Siemens AG. ( abstract, full paper )
17:10	Branner, K., Di Lorenzo, E., Vettori, S., Berring, P., Haselbach, P. U., and Peeters, B., 'Executable digital twin demonstrator of wind turbine blade', Technical University of Denmark. ( abstract, full paper )
17:35	Manvelyan, D., Simeon, B., and Wever, U., 'Enabling predictive digital twins in contact mechanics using physics-based reduction schemes', Siemens AG. ( abstract, full paper )
18:00	van Ophem, S., Forrier, B., Bizzarri, D., Atak, O., Garcia de Miguel, A., Elkafafy, M., Dal Borgo, M., Tamarozzi, T., Alvarez Blanco, M., Janssens, K., and Pluymers, B., 'Physics-based virtual acoustic sensing for enhanced direct field acoustic excitation testing', Flanders Make@KU Leuven. ( abstract, full paper )

---

GREYDIENT ITN - special session

GREY - Monday 12 Sep 2022

16:20	Dodt, M. B., Persoons, A., Faes, M. G. R., and Moens, D., 'Active learning in grey-box models for near-real-time online monitoring of dynamic processes', KU Leuven. ( abstract, full paper )
16:45	Colella, G., Lange, V. A., and Duddeck, F., 'Transfer learning for metamodel construction to enable uncertainty quantifications in crash design based on scarce data availability', BMW AG. ( abstract, full paper )
17:10	Ascia, P., Burmberger, L., Daub, M., and Duddeck, F., 'A finite element model of component solution space for early stage design uncertainties', Technische Universität München. ( abstract, full paper )
17:35	Stefanou, G., Savvas, D., Gavallas, P., and Papaioannou, I., 'Response statistics of composite structures with stochastic material properties based on microstructure', Aristotle University of Thessaloniki. ( abstract, full paper )
18:00	Bonnet-Eymard, D., Persoons, A., Faes, M. G. R., and Moens, D., 'Physics informed neural network as surrogate model to quantify the uncertainty of the elastic response of a material', KU Leuven. ( abstract, full paper )

---

Inverse methods - load identification

INV - Tuesday 13 Sep 2022

15:40	Fournier, L., Sanches, L., Foucaud, S., and Michon, G., 'Identification of the dynamic influence of non-structural elements in aerospace structures', Université de Toulouse, ICA, CNRS, ISAE-Supaero. ( abstract, full paper )
16:05	Ghibaudo, J., Aucejo, M., and Dr Smet, O., 'Performances of a family of new Bayesian filters for input estimations', Conservatoire National des Arts et Métiers. ( abstract, full paper )
16:30	Malacrida Alves, G., and Balmes, E., 'A time varying system perspective on rubber mount tests', SDTools / ENSAM. ( abstract, full paper )
16:55	Haywood-Alexander, M., Dervilis, N., Worden, K., Ladpli, P., Fremmelev, M. A., and Rogers, T. J., 'Bayesian identification of material properties for a fibre-composite plate, via dispersion curves', The University of Sheffield. ( abstract, full paper )
17:20	Lindberg, A., Lövgren, B., and Ingvarsson, Á., 'Short-time least squares spectral analysis of stepped sine pulses in a water test tank', SAAB Dynamics. ( abstract, full paper )
17:45	Żelawski, F., and Pieczonka, Ł., 'Identification of moisture content in short fiber reinforced composites with the use of resonant ultrasound spectroscopy', AGH University of Science and Technology. ( abstract, full paper )

---

Medium and high frequency techniques

MHF - Tuesday 13 Sep 2022

13:35	Margerit, P., 'Extraction of dispersion surfaces: a review of applications, methods and open questions', PIMM Laboratory, ENSAM Paris. ( abstract, full paper )
14:00	Finn, J. S., Jefferson-Loveday, R., Richter, M., and Tanner, G., 'Using dynamical energy analysis to model the vibrational response of real-world structures to correlated excitation fields', University of Nottingham. ( abstract, full paper )
14:25	Leclère, Q., Marchetti, F., Roozen, N. B., Ege, K., and Kersemans, M., 'Wave correlation approaches to analyse vectorial velocity fields: application to a honeycomb core sandwich panel', INSAVALOR. ( abstract, full paper )
14:50	Van hoorickx, C., and Reynders, E. P. B., 'A general approach to evaluate the coupling strength for statistical energy analysis', KU Leuven. ( abstract, full paper )

---

Mid-frequency ITN - 10 year later special session

MID - Monday 12 Sep 2022

15:55	Atak, O., Li, Y., Hamiche, K., Beriot, H., and Desmet, W., 'BEMAO: A novel adaptive and high-order BEM solver for steady-state acoustics - part 1: theory', Siemens Digital Industries Software. ( abstract, full paper )
16:20	Hamiche, K., Atak, O., Li, Y., Bériot, H., and Desmet, W., 'BEMAO: A novel adaptive and high-order BEM solver for steady-state acoustics - part 2: applications', Siemens Digital Industries Software. ( abstract, full paper )
16:45	Pavic, G., 'Vibration isolation: energy versus conventional strategies', INSA Lyon. ( abstract, full paper )
17:10	Cicirello, A., Van Belle, L., Igea, F., and Deckers, E., 'A machine learning optimization approach for the assessment of the robustness of a design solution with application to vibration mitigation solutions', TU Delft. ( abstract, full paper )
17:35	Langley, R. S., 'The statistics of frequency response functions in built-up structures', University of Cambridge. ( abstract, full paper )
18:00	Rumpler, R., and Aumann, Q., 'A multivariate WCAWE for parametric model order reduction', KTH Royal Institute of Technology. ( abstract, full paper )

---

Modal updating

MU - Wednesday 14 Sep 2022

08:30	Sánchez-Quesada, J. C., Moliner, E., Romero, A., Galvín, P., and Martínez-Rodrigo, M. D., 'Model updating of an oblique multi-span railway bridge and effect of transverse diaphragms on the dynamic performance', Universitat Jaume I. ( abstract, full paper )
08:55	Deonarain, G., Blough, E., and Blough, J., 'Frequency domain assurance criterion for defect detection in additively manufactured parts', Michigan Technological University. ( abstract, full paper )
09:20	Ellath Meethal, R., Khalil, M., Obst, B., Bletzinger, K.-U., and Wüchner, R., 'Model updating in rotor dynamic system using FEM based neural network', Siemens AG. ( abstract, full paper )

---

Model order reduction

MOR1 - Tuesday 13 Sep 2022

10:35	Frie, L., Dieterich, O., and Eberhard, P., 'Parametric model order reduction for speed-controlled elastic rotors', University of Stuttgart. ( abstract, full paper )
11:00	Cool, V., Jonckheere, S., Deckers, E., and Desmet, W., 'Loewner-based black box stability preserving model reduction for time domain simulations of damped dynamical systems', Flanders Make@KU Leuven. ( abstract, full paper )
11:25	Bouras, A., and Carassale, L., 'Load projection for reduced order models of bladed disks', University of Genoa. ( abstract, full paper )

MOR2 - Tuesday 13 Sep 2022

14:00	Capalbo, C. E., De Gregoriis, D., Tamarozzi, T., Devriendt, H., Naets, F., Carbone, G., and Mundo, D., 'Structural model updating using parametric model order reduction and augmented kalman filtering', University of Calabria. ( abstract, full paper )
14:25	Bizzarri, D., Atak, O., van Ophem, S., Bériot, H., Tamarozzi, T., Jiranek, P., Scurria, L., Garcia de Miguel, A., Alvarez Blanco, M., Janssens, K., and Desmet, W., 'Model order reduction and smart virtual sensing for unbounded vibro-acoustics using high order FEM and infinite elements', Siemens Digital Industries Software. ( abstract, full paper )
14:50	Matter, F., Iroz, I., and Eberhard, P., 'Brake squeal analysis using parametric model order reduction', University of Stuttgart. ( abstract )

---

Multi-body dynamics and control

MB - Tuesday 13 Sep 2022

15:40	Cohen, R., Bachar, L., Klein, R., and Bortman, J., 'A realistic dynamic model for helical gear', Ben Gurion University. ( abstract, full paper )
16:05	Schilder, J., van Voorthuizen, K., and Ellenbroek, M., 'Best practices in teaching flexible multibody dynamics', University of Twente. ( abstract, full paper )
16:30	Carcaterra, A., Pepe, G., Roveri, N., and Tini, T., 'Processing of logical-physical rules in the control of the autonomous vehicle', University of Rome La Sapienza. ( abstract, full paper )
16:55	Vanpaemel, S., Vermaut, M., Desmet, W., and Naets, F., 'Applying fully-coupled structural topology optimization for vibration reduction in high-dynamic mechanical systems', Flanders Make@KU Leuven. ( abstract, full paper )
17:20	Ellenbroek, M. H. M., and Schilder, J. P., 'Deployment analysis of a solar panel array as a demonstration of a new superelement formulation in multibody dynamics', University of Twente. ( abstract, full paper )
17:45	Vivet, M., Libralato, A., Verhoogen, J., Jiránek, P., and Tamarozzi, T., 'Advanced modelling of straight bevel gear contact for multibody simulations', Siemens Digital Industries Software. ( abstract, full paper )

---

Non-linearities: identification and modelling

NL1 - Monday 12 Sep 2022

15:30	Volvert, M., and Kerschen, G., 'Analytical study of the amplitude and phase resonances of a Duffing oscillator', University of Liège. ( abstract, full paper )
15:55	Champneys, M. D., Rogers, T. J., Dervilis, N., and Worden, K., 'On higher-order frequency response functions from kernel-NARX methods', University of Sheffield. ( abstract, full paper )
16:20	Vered, Y., and Elliott, S. J., 'The use of a digital twin to reconfigure a nonlinear internal model controller', University of Southampton. ( abstract, full paper )
16:45	Jayatilake, S. D., Woods, B., Lowenberg, M., and Titurus, B., 'Analysis of structural dynamics and damping performance of a beam-tendon system undergoing large shape changes', University of Bristol. ( abstract, full paper )
17:10	Cadiot, X., Sanches, L., Hot, A., Mouysset, A., and Michon, G., 'Identification procedure of non-linear parameters for satellite cable harness dynamic modeling', ISAE-Supaero. ( abstract, full paper )
17:35	Bucher, I., Ben-Shaya, N., and Dolev, A., 'Auto-resonance control of a nonlinear, parametrically excited system – application to nano-scale topography sensing', Technion. ( abstract, full paper )
18:00	Yang, Y., Li, S., and Rostamijavanani, A., 'Data-driven Nonlinear Normal Modal Identification and Reduced-order Modeling: A Physics-integrated Deep Learning Approach', Michigan Technological University. ( abstract )

NL2 - Tuesday 13 Sep 2022

08:30	Szydlowski, M. J., and Renson, L., 'Modelling nonlinear structures by combining mechanistic models with Lagrangian neural networks', Imperial College London. ( abstract, full paper )
08:55	Goyder, H. G., 'Fitting a measured spectrum from a nonlinear structure to produce a model', Cranfield University. ( abstract, full paper )
09:20	Kleyman, G., Tatzko, S., and Wallaschek, J., 'Application of experimental continuation to a geometrically nonlinear beam', Leibniz University Hannover. ( abstract, full paper )
09:45	Csurcsia, P. Z., and De Troyer, T., 'User-friendly nonlinearity modeling to split-up the multiple coherence function using the SAMI toolbox', Vrije Universiteit Brussel. ( abstract, full paper )

NL3 - Tuesday 13 Sep 2022

10:35	Baeuerle, S., Seifert, A., Kappauf, J., and Hetzler, H., 'A continuation framework for quasi-periodic solution branches based on different torus discretization strategies', University of Kassel. ( abstract, full paper )
11:00	Rustighi, E., Gardonio, P., Cignolini, N., Baldini, S., Malacarne, C., and Perini, M., 'Vibration response of tuneable structured fabrics', Universita di Trento. ( abstract, full paper )
11:25	Billot, G., Marinus, B. G., Harri, K., and Moiny, F., 'Non-linear or linear propagation in high intensity blasts from firearms: where is the boundary?', Royal Military Academy. ( abstract, full paper )
11:50	Gürses, K., Özgen, G. O., and Acar, B., 'Experimental investigation of amplitude-dependent behaviour of a wire rope isolator system using modal testing methods', Roketsan Inc.. ( abstract, full paper )

NL4 - Wednesday 14 Sep 2022

13:35	Constantin, L., DeCourcy, J., Titurus, B., Rendall, T., and Cooper, J. E., 'Nonlinear identification of transient tank vertical sloshing motions', Unversity of Bristol. ( abstract, full paper )
14:00	Latini, F., Brunetti, J., D'Ambrogio, W., and Fregolent, A., 'Assessment of solution accuracy using nonlinear experimental substructure coupling', Università di Roma La Sapienza. ( abstract, full paper )
14:25	Floren, M., and Noël, J.-P., 'Nonlinear restoring force modelling using Gaussian processes and model predictive control', KU Leuven. ( abstract, full paper )
14:50	Abdi, M., Sorokin, V., and Mace, B., 'Numerical analysis of the reflection of multiple incident waves from a nonlinear boundary for an Euler-Bernoulli beam', University of Auckland. ( abstract, full paper )
15:15	Safari, S., and Londoño Monsalve, J. M., 'Physics-informed model Identification of structures with localised nonlinearities using machine learning', University of Exeter. ( abstract, full paper )
15:40	Hickey, J., Butlin, T., Langley, R., and Onozato, N., 'A time and ensemble equivalent linearization method for combined harmonic and random excitation', University of Cambridge. ( abstract, full paper )

---

Operational modal analysis

OMA - Monday 12 Sep 2022

13:25	Schwochow, J., Gnebner, K., and Govers, Y., 'Application of time-periodic stochastic subspace identification on operating wind turbine rotor data', DLR Göttingen. ( abstract, full paper )
13:50	De Carolis, S., De Filippis, G., Palmieri, D., and Soria, L., 'Overcoming the natural excitation assumption: a strategy to deal with colouration and time/space correlation in output-only modal analysis', Politecnico di Bari. ( abstract, full paper )
14:15	Fernandes, A., Winkler, K., Weijtjens, W., and Devriendt, C., 'Operational modal analysis campaign conducted during the construction of an offshore wind farm', Vrije Universiteit Brussel - VUB. ( abstract, full paper )
14:40	Bisceglia, G., De Carolis, S., Colucci, V., Valentino, V., and Soria, L., 'Operational Modal Analysis for the evaluation and classification of rail-head irregularities and the simultaneous identification of train modal parameters', Politecnico di Bari. ( abstract, full paper )

---

Optical methods

OPT1 - Tuesday 13 Sep 2022

08:30	Zanarini, A., 'On the approximation of sound radiation by means of experiment-based optical full-field receptances', University of Bologna. ( abstract, full paper )
08:55	Tenenbaum, E., and Bucher, I., 'Reconstruction of a nonlinear acoustic field based on acousto-optic effect computational tomography', Technion. ( abstract, full paper )
09:20	Wang, Y., Dwek, N., Willems, T., Egner, F., and Kirchner, M., 'Camera based experimental modal analysis: rigid body motion compensation and high frequency impulse response signal reconstruction from randomly under-sampled images', Flanders Make@KU Leuven. ( abstract, full paper )
09:45	Suhr, M., Orlowitz, E., Hansen, J. F., and Brandt, A., 'Digital image correlation and operational modal analysis: A study of influential factors for non-contact measurements', Aarhus University / Siemens Gamesa Renewable Energy. ( abstract, full paper )

OPT2 - Tuesday 13 Sep 2022

15:40	Marinel, C., Losson, O., Mathon, B., Le Besnerais, J., and Macaire, L., 'Comparison of operational modal analysis methods from displacement estimation by video processing', Univ. Lille, UMR CRIStAL. ( abstract, full paper )
16:05	Madinier, N., Berry, A., Leclère, Q., and Ege, K., 'Comparison of two force identification methods from full field measurements performed with optical deflectometry', Université de Sherbrooke (CA)/INSA de Lyon (FR). ( abstract, full paper )
16:30	Tomac, I., and Slavič, J., 'Damping identification using high-speed camera', University of Ljubljana. ( abstract, full paper )
16:55	Gres, S., Anastasopoulos, D., Hansen, J. F., Abbiati, G., and Reynders, E. P. B., 'Statistical sensitivity-based damage localization with an optical strain-based features', Aarhus University. ( abstract, full paper )
17:20	Gardonio, P., Guernieri, G., Turco, E., Rinaldo, R., and Fusiello, A., 'Reconstruction of the sound radiation field from plate flexural vibration measurements taken with multiple cameras', Università degli Studi di Udine. ( abstract, full paper )
17:45	Willems, T., and Naets, F., 'Identification of structural dynamic parameters from visionbased measurements', Flanders Make@KU Leuven. ( abstract, full paper )

OPT3 - Wednesday 14 Sep 2022

10:35	Verwimp, T., Mauricio, A., and Gryllias, K., 'Measurement of the speed of a rotating shaft through smartphone video acquisition exploiting the rolling shutter effect', KU Leuven. ( abstract, full paper )
11:00	Mastrodicasa, D., Di Lorenzo, E., Manzato, S., Peeters, B., and Guillaume, P., 'Multi camera 3D DIC on a small scaled fixed wing model', Siemens Digital Industries Software. ( abstract, full paper )
11:25	Balaji, N. N., Brake, M. R. W., and Jermaine, C. M., 'Digital image correlations and deep learning: new perspectives for experimental dynamics', Rice University. ( abstract, full paper )
11:50	Zaletelj, K., Slavič, J., and Boltežar, M., 'Location-specific weighting of the high-speed camera-based full-field model updating', University of Ljubljana. ( abstract, full paper )

---

Periodic structures and metamaterials

PER1 - Monday 12 Sep 2022

13:25	Singleton, L., Cheer, J., and Daley, S., 'A locally resonant elastic metamaterial utilising multi-material additive manufacturing', University of Southampton. ( abstract, full paper )
13:50	Dedoncker, S., Donner, C., Taenzer, L., and Van Damme, B., 'Vibration suppression via optimal design and positioning of resonant structures', Empa. ( abstract, full paper )
14:15	Santo, D. R., de Oliveira, L. P. R., and Gonçalves, P. J. P., 'On the dynamic behavior of mono-coupled continuous structures attached to nonlinear resonators', São Carlos School of Engineering / University of São Paulo. ( abstract, full paper )
14:40	Duhamel, D., and Mencik, J.-M., 'Finite element modeling of locally nonlinear infinite periodic structures using time-domain absorbing boundary conditions', Ecole des Ponts ParisTech. ( abstract, full paper )

PER2 - Tuesday 13 Sep 2022

10:10	Kleine-Wächter, L., Rumpler, R., Mao, H., and Müller, G., 'Numerical study of Kelvin cells for the design of periodic lattice metamaterials', Techical University of Munich/ KTH Royal Institute of Technology. ( abstract, full paper )
10:35	Mosquera-Sánchez, J. A., and De Marqui Jr., C., 'A nonlinear electroelastic metastructure for broadband wave attenuation', University of Sao Paulo. ( abstract, full paper )
11:00	Giannini, D., Schevenels, M., and Reynders, E., 'Multi-modal locally resonant metamaterials for orthotropic structures', KU Leuven. ( abstract, full paper )
11:25	De Bie, F., Denayer, H., Claeys, C., and Deckers, E., 'Quarter-wavelength acoustic metamaterials: the effect of folding on the resonance frequency', Flanders Make@KU Leuven. ( abstract, full paper )
11:50	Mencik, J.-M., and Gobert, M.-L., 'Acoustic radiation of 2D nearly periodic metamaterial plates via finite element procedures and model reduction strategies', INSA Centre Val de Loire. ( abstract, full paper )

PER3 - Wednesday 14 Sep 2022

08:30	Lázaro, M., Niemczynowicz, A., Siemaszko, A., and García-Raffi, L. M., 'Wave propagation in structures with Sturmian quasiperiodic patterns', Universitat Politècnica de València. ( abstract, full paper )
08:55	Muhammad, -., and Kennedy, J., 'Additively manufactured composite metastructure for broadband vibration and noise control applications', Trinity College Dublin. ( abstract, full paper )
09:20	Beli, D., Rosa, M. I. N., De Marqui Jr., C., and Ruzzene, M., 'High-order wave directionality and topological valley modes in elastic quasicrystals', University of São Paulo (USP). ( abstract, full paper )
09:45	Thomsen, H. R., Zhao, B., and Colombi, A., 'Active one-dimensional boundary reflection cancellation applied to metamaterial experimentation', ETH Zurich. ( abstract, full paper )

PER4 - Wednesday 14 Sep 2022

13:35	Schimidt, C. S., De Oliveira, L. P. R., and Junior, C. D. M., 'Broadening noise reduction via graded smart metamaterials', Universidade de São Paulo. ( abstract, full paper )
14:00	Ribeiro, L. H. M. S., Dias de Lima, V., Braghini, D., and Arruda, J. R. d. F., 'Design and test of a periodic NBR-steel frame structure', University of Campinas. ( abstract, full paper )
14:25	Matsushita, H., Mizukami, K., Koga, Y., Matsunaga, H., Satou, Y., and Miura, k., 'Reduction of heavy impact sound on floor slab by using mechanical metamaterial', Takenaka corporation. ( abstract, full paper )
14:50	Cerântola, P. C. M., and de Oliveira, L. P. R., 'Improving panel insertion loss via aperiodic tiling of decorated membrane resonators', São Carlos School of Engineering - University of São Paulo. ( abstract, full paper )
15:15	Alves Pires, F., Wandel, M., Thomas, C., Deckers, E., and Claeys, C., 'Improve sound transmission loss of an aircraft’s lining panel by the use of locally resonant metamaterials', Flanders Make@KU Leuven. ( abstract, full paper )
15:40	Tomilina, T., '3D-Printing of vibro-acoustic metamaterials: the problem of model and experiment compliance', A.A.Blagonravov Mechanical Engineering Research Institute. ( abstract, full paper )

---

Railway dynamics and ground vibrations

RAIL1 - Monday 12 Sep 2022

16:20	Freisinger, J., and Müller, G., '2.5D ITM-FEM approach for the prediction of ground-borne vibrations from two parallel underground railway tunnels', Technical University of Munich. ( abstract, full paper )
16:45	Herremans, G., François, S., and Degrande, G., 'Reduced order models for railway induced vibration based on the Proper Generalized Decomposition', KU Leuven. ( abstract, full paper )
17:10	Chordà-Monsonís, J., Martínez-Rodrigo, M. D., Galvín, P., Romero, A., and Moliner, E., 'Effect of the ballasted track on the dynamic response of multi-span railway bridges using a discrete approach', Universitat Jaume I. ( abstract, full paper )
17:35	Kritikakos, K., Fassois, S. D., and Sakellariou, J. S., 'On robust detection of hunting on railway vehicles via multiple vibration sensors', University of Patras. ( abstract, full paper )
18:00	Auersch, L., 'Railway-induced ground and building vibrations – Analysis in frequency-wavenumber domain and fast prediction with approximate models', Federal Institute of Material Research and Testin. ( abstract, full paper )

RAIL2 - Tuesday 13 Sep 2022

16:05	Carneiro, D. A. S., Kato, H., Reumers, P., Lombaert, G., and Degrande, G., 'Mitigation of environmental ground vibration using seismic metasurfaces', KU Leuven. ( abstract, full paper )
16:30	Carrigan, T. D., and Talbot, J. P., 'Monitoring rail roughness using axle-box accelerometers on trains in the London Underground', University of Cambridge. ( abstract, full paper )
16:55	Vlachospyros, G., Fassois, S. D., and Sakellariou, J. S., 'MISO Transmittance based robust and unsupervised fault detection in railway suspensions under payload and track uncertainty', University of Patras. ( abstract, full paper )
17:20	Ramatlo, D. A., Wilke, D. N., and Loveday, P. W., 'Synthetic data for guided wave ultrasound monitoring of rail tracks generated using statistical modelling and variational auto-encoders', University of Pretoria. ( abstract, full paper )
17:45	Taddei, F., Kumawat, A., Csuka, A., Cudmani, R., and Müller, G., 'Input characterisation for low-amplitude seismicity induced by geothermal operations', Technical University of Munich. ( abstract, full paper )

---

Self-excited vibrations

SEV - Tuesday 13 Sep 2022

10:10	Suglob, A., and Marzok, C., 'Methods for test-validation of flow induced vibrations', Carl Zeiss SMT GmbH. ( abstract, full paper )
10:35	Kulke, V., Ostermeyer, G.-P., Reckmann, H., and Hohl, A., 'Analyzing the root cause of critical self-excited cutting or friction induced vibrations considering multiple nonlinearities', TU Braunschweig. ( abstract, full paper )
11:00	Schramm, A. E., Sorrentino, S., and De Felice, A., 'Nonlinear effects on the self-excited oscillations known as motorcycle chatter', University of Bologna. ( abstract, full paper )
11:25	Tentarelli, M., Cantelli, S., Sorrentino, S., and De Felice, A., 'Experimental stability analysis of tractor drivelines affected by cold judder', University of Modena and Reggio Emilia. ( abstract, full paper )
11:50	Hohl, A., Kulke, V., and Ostermeyer, G.-P., 'Insights through modal minimal models discussed for a self-excitation phenomenon in a downhole drilling application', Baker Hughes. ( abstract, full paper )

---

Structural dynamics: methods and case studies

SD1 - Tuesday 13 Sep 2022

08:30	Astarloa, A., Sanz-Calle, M., Munoa, J., Pena-Barrio, J., Mancisidor, I., Aguirre, G., Fernandes, M. H., López de Lacalle, L. N., and Dombovari, Z., 'Enhancement of cutting capacity of slender turning tools by means of mode coupling between tools', IDEKO. ( abstract, full paper )
08:55	Frank, J., Ma, D., and Zimmermann, M., 'Topology optimisation subject to anisotropic stiffness constraints for the lightweight design of vibrating structures', Technical University of Munich. ( abstract, full paper )
09:20	Guernieri, G., Gardonio, P., Stücheli, M., and Turrin, D., 'Virtual sensing of professional washing machine drum displacement and centrifugal force', Università degli Studi di Udine. ( abstract, full paper )

SD2 - Tuesday 13 Sep 2022

16:05	De Maeyer, J., De Munter, W., Heylen, F., Schreurs, S., and Vandepitte, D., 'Disturbance rejection on SmallSat space platforms', KU Leuven. ( abstract, full paper )
16:30	Iriondo, J., McCloskey, A., Mendizabal, M., Irazu, L., and Galfarsoro, U., 'Damping characterisation of an elevator rope', Mondragon Unibertsitatea. ( abstract, full paper )
16:55	Vancauwenbergh, L., Vandepitte, D., Moens, D., Noël, J.-P., Claessens, S., Vanneste, G., and Vercruijsse, P., 'A cutter suction dredger in hard rock digital twin approach using the wavelet transform', DEME group. ( abstract, full paper )
17:20	Martini, V., Okabe, E., and Cavalca, K., 'Experimental modal analysis in a rotating machine foundation and its implications in a simple case of dynamic substructuring', University Of Campinas. ( abstract, full paper )
17:45	Kappauf, J., Hetzler, H., and Bäuerle, S., 'A hybrid approximation method for the analysis of periodic solutions of large-scale dynamical systems', University of Kassel. ( abstract, full paper )

SD3 - Wednesday 14 Sep 2022

13:35	Larsson, J., Göransson, P., and Wennhage, P., 'Mass minimization of load carrying sandwich structures subjected to dynamic loads by concurrent optimization of core topology and face sheet thickness', KTH. ( abstract, full paper )
14:00	Lagerblad, U., 'An industrial validation of a fatigue damage prediction methodology', Scania CV AB. ( abstract, full paper )
14:25	Paifelman, E., Milana, S., Culla, A., and Ciappi, E., 'Swimming robot emulating fish propulsion', Institute of Marine Engineering, INM-CNR of Rome. ( abstract, full paper )
14:50	Holmewood, R., Halkon, B., and Darwish, A., 'Towards real-time vibroacoustic classification, verification and tracking of in-flight UAVS', University of Technology Sydney. ( abstract, full paper )
15:15	Zapata, L. M., Tuerlinckx, T., Desmet, W., and Naets, F., 'Multiple input reconstruction using an impulse response filter: Experimental investigation', Flanders Make@KU Leuven. ( abstract, full paper )

---

Structural health monitoring

SHM1 - Tuesday 13 Sep 2022

08:30	Dardeno, T. A., Mills, R. S., Bull, L. A., Dervilis, N., and Worden, K., 'Investigating the effects of temperature variation in vibration-based SHM', University of Sheffield. ( abstract, full paper )
08:55	Denimal, E., and Greś, S., 'Crack-damage quantification based on stochastic optimization of finite element models with data-driven features', Inria. ( abstract, full paper )
09:20	Theunissen, K., Verstraelen, E., Golinval, J.-C., and Denoël, V., 'Influence of structural damages on first Passage time maps', University of Liège. ( abstract, full paper )

SHM2 - Tuesday 13 Sep 2022

13:35	Kullaa, J., 'Separating feature changes due to damage and environmental conditions using transfer learning', Metropolia University of Applied Sciences. ( abstract, full paper )
14:00	Poole, J., Gardner, P., Dervilis, N., Bull, L., and Worden, K., 'A comparison of kernel and deep domain adaptation methods for SHM', The University of Sheffield. ( abstract, full paper )
14:25	Battu, R. S., Agathos, K., Smith, C., and Papatheou, E., 'Robust training databases for supervised learning algorithms in structural health monitoring applications', University of Exeter. ( abstract, full paper )
14:50	van de Velde, M., Anastasopoulos, D., Reynders, E., and Lombaert, G., 'Vibration-based monitoring of small-scale damage in prestressed concrete beams using joint acceleration and FBG strain data', KU Leuven. ( abstract, full paper )

SHM3 - Wednesday 14 Sep 2022

08:30	Saramantas, I. E., Kriatsiotis, I. M., Konis, P. E., Sakellariou, J. S., and Fassois, S. D., 'Random vibration response based damage detection for a population of nominally identical composite aerostructures via hyper-sphere healthy subspace methods', University of Patras. ( abstract, full paper )
08:55	Dubey, A., Denis, V., Hennebelle, F., and Serra, R., 'Localization and quantification of geometry damage and their size estimation using frequency shift coefficient and damage library', Université de Bourgogne. ( abstract, full paper )
09:20	Brennan, D. S., Rogers, T. J., Cross, E. J., and Worden, K., 'On quantifying the similarity of structures via a Graph Neural Network for population-based structural health monitoring', University of Sheffield. ( abstract, full paper )

---

Substructuring and coupling

SC1 - Monday 12 Sep 2022

13:25	Hippold, P., Groß, J., Müller, F., and Krack, M., 'A nonlinear dynamic substructuring method using orthogonal polynomials for interface reduction', University of Stuttgart. ( abstract, full paper )
13:50	Xu, D., Häußler, M., and Zimmermann, M., 'Computing component requirements for multiple connected transfer paths of structural borne noise', Technical University of Munich. ( abstract, full paper )
14:15	Di Manno, M., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Latini, F., 'Possible improvements in SEMM-based joint identification', University of Rome La Sapienza. ( abstract, full paper )
14:40	Meyer, V., and Dutto, P., 'Estimating the transient vibro-acoustic response of a submerged structure using a substructuring approach', Naval Group. ( abstract )

SC2 - Wednesday 14 Sep 2022

10:10	Trainotti, F., Slimak, T., and Rixen, D. J., 'Towards full-field frequency based substructuring: an application case', Technical University of Munich. ( abstract, full paper )
10:35	Čepon, G., Pogačar, M., Kodrič, M., and Boltezar, M., 'System equivalent model mixing: Frequency-based and modal formulation with practical applications', University of Ljubljana. ( abstract, full paper )
11:00	Brøns, M., and Rixen, D. J., 'Dynamic disturbance substructuring: identifying localized nonlinear vibrations', Technical University of Denmark. ( abstract, full paper )
11:25	Brunetti, J., D'Ambrogio, W., and Fregolent, A., 'Taking advantage of multiple solutions in configuration-dependent substructure decoupling', Università dell'Aquila. ( abstract, full paper )
11:50	Minervini, D., and Stella, A., 'Experimental frequency-based decoupling for tire characterization', Siemens Digital Industries Software. ( abstract, full paper )

---

Transfer path analysis

TPA - Monday 12 Sep 2022

15:55	Häußler, M., Klaassen, S., de Klerk, D., and Rumpel, T., 'Component based OTPA: An alternative to component TPA without impact measurements', VIBES.technology. ( abstract, full paper )
16:20	Ocepek, D., Vrtač, T., Čepon, G., and Boltežar, M., 'Estimation of frequency response functions using independant source characterization', University of Ljubljana. ( abstract, full paper )
16:45	Bianciardi, F., Colangeli, C., Ortega Almiron, J., Pieroni, N., Kindt, P., and Corbeels, P., 'A framework combining component-based TPA and sound synthesis technologies for a road noise application case', Siemens Digital Industries Software. ( abstract, full paper )
17:10	Carter, S. P., and Owens, B. C., 'Errors using six degree-of-freedom force estimates to translate environments system-to-system', Sandia National Laboratories. ( abstract, full paper )
17:35	Gunipe, J. A., and Palanivelu, S., 'Study of Engine NVH in a passenger car interior through in-situ TPA method', Vellore Institute of Technology, Vellore. ( abstract, full paper )
18:00	Pasma, E. A., Klaassen, S. W. B., Passanesi, A. V. V., and Westlund, J., 'Advanced complex power TPA studies for road noise NVH performance on a rear axle', Vibes Technology BV. ( abstract, full paper )

---

Tuned vibration absorbers and dampers

TVD - Tuesday 13 Sep 2022

08:30	Dekemele, K., Habib, G., and Loccufier, M., 'Vibration mitigation with a nonlinear energy sink having periodically extended stiffness', Ghent University. ( abstract, full paper )
08:55	Casagrande, D. E., Gardonio, P., and Konda Rodrigues, G., 'Vibration control with self-tuning vibration absorption employing Extremum seeking algorithm', Universidad de O'Higgins. ( abstract, full paper )
09:20	Pena-Barrio, J., Astarloa, A., Fernandes, M. H., Mancisidor, I., Dombovari, Z., Muñoa, J., and Aguirre, G., 'Two degree of freedom TMD to enhance the cutting capacity and robustness of slender boring bars', Ideko. ( abstract, full paper )

---

USD - Applications

USDA1 - Monday 12 Sep 2022

13:25	Nespoulous, J., Soize, C., Funfschilling, C., and Perrin, G., 'Bayesian inference for high-speed train dynamics and speed optimization under uncertainty for energy saving', Université Gustave Eiffel. ( abstract, full paper )
13:50	Faes, M. G., Fina, M., Lauff, C., Valdebenito, M. A., Wagner, W., and Freitag, S., 'Bounding the first excursion probability of stochastic oscillators under randomness and imprecision', Technische Universität Dortmund. ( abstract, full paper )
14:15	Greś, S., and Döhler, M., 'Uncertainty propagation in subspace methods for operational modal analysis under misspecified model orders', Inria. ( abstract, full paper )
14:40	Wolfsteiner, P., Trapp, A., and Fertl, L., 'Random vibration fatigue with non-stationary loads using an extended fatigue damage spectrum with load spectra', Munich University of Applied Sciences. ( abstract, full paper )
15:05	Isnardi, I., Menga, E., Mottershead, J. E., and Fichera, S., 'Framework for stochastic updating in structural dynamics', University of Liverpool. ( abstract, full paper )
15:30	Van Bavel, B., Zhao, Y., Vandepitte, D., Moens, D., and Faes, M. G. R., 'Bridging the composite meso-macro gap: A numerically efficient spatial uncertainty quantification approach', KU Leuven. ( abstract, full paper )

USDA2 - Tuesday 13 Sep 2022

13:35	Lindley, C. A., Jones, M. R., Rogers, T. J., Dwyer-Joyce, R. S., Dervilis, N., and Worden, K., 'A nonparametric Bayesian approach for the detection of acoustic emission events in time series signals', University of Sheffield. ( abstract, full paper )
14:00	Condor Lopez, J. G., Stumpf, J., and Freitag, H.-G., 'Robust design optimization of nonlinear powertrain mounting systems with solution space engineering', Mercedes-Benz AG. ( abstract, full paper )
14:25	Sadoulet-Reboul, E., Bachy, E., Jaboviste, K., and Chevallier, G., 'Performance and robustness of a 3D metabsorber', UFC - FEMTO ST. ( abstract, full paper )
15:15	Barzanooni, R., van Mierlo, C., Pabst, M., Boegle, C., Faes, M. G. R., Moens, D., and Duddeck, F., 'Evaluation of uncertain boundary conditions for analysis of structural components with respect to crashworthiness', Technical University of Munich. ( abstract, full paper )

---

USD - Uncertainty identification and quantification

USDUIQ - Tuesday 13 Sep 2022

16:05	Könecke, T., Hose, D., Frie, L., Hanss, M., and Eberhard, P., 'Analysis of mixed uncertainty through possibilistic inference by using error estimation of reduced order surrogate models', University of Stuttgart. ( abstract, full paper )
16:30	Steffensen, M. T., Thomsen, J. J., and Tcherniak, D., 'Uncertainty quantification in modal parameter estimation algorithm in case of input and output noise', Technical University of Denmark. ( abstract, full paper )
16:55	Pitchforth, D. J., Rogers, T. J., Tygesen, U. T., and Cross, E. J., 'Incorporation of partial physical knowledge within Gaussian processes', The University of Sheffield. ( abstract, full paper )
17:20	He, K., Zhang, W., Miao, J., Zhao, Y., Zhang, J., and Bi, S., 'An inverse model updating procedure using the artificial intelligence technologies towards NASA UQ Challenge 2019', Beijing institution of technology. ( abstract, full paper )
17:45	Ludwig, C., Loukrezis, D., and Boschert, S., 'Democratization of uncertainty quantification in industrial design', Siemens AG. ( abstract, full paper )

---

USD – Methods

USDM1 - Tuesday 13 Sep 2022

10:10	O'Connell, B. J., Cross, E. J., Tygesen, U. T., and Rogers, T. J., 'Bayesian canonical correlations for stochastic subspace identification', The University of Sheffield. ( abstract, full paper )
10:35	Wu, Q., Zhang, W., Miao, J., Zhang, J., and Bi, S., 'System matrices identification with Riccati equation solution and global optimization to reduce experimental uncertainties', Beijing University of Technology. ( abstract, full paper )
11:00	Wilson, J. S., Gardner, P., Manson, G., and Barthorpe, R. J., 'The role of features in a hierarchical modelling strategy for forward model-driven structural health monitoring', The University of Sheffield. ( abstract, full paper )
11:25	van Dijk, W., Hakvoort, W. B. J., and Rosic, B., 'Bayesian updating for nonlinear dynamics problems using machine learning', University of Twente. ( abstract, full paper )

USDM2 - Wednesday 14 Sep 2022

08:30	Schneider, F., Papaioannou, I., Straub, D., and Müller, G., 'Sparse Bayesian rational approximation for uncertainty quantification of structural dynamic models', Technical University of Munich. ( abstract, full paper )
08:55	Chatterjee, T., Adhikari, S., Friswell, M. I., and Khodaparast, H. H., 'Non-parametric stochastic reduced-order modelling of built-up structures', College of Engineering, Swansea University. ( abstract, full paper )
09:20	Longbottom, J. D., Champneys, M. D., Cross, E. J., Tygesen, U. T., and Rogers, T. J., 'Probabilistic numerical integration and sequential Monte Carlo for online identification of nonlinear dynamic systems', University of Sheffield. ( abstract, full paper )
09:45	Persoons, A., Wei, P., Bogaerts, L., Moens, D., Broggi, M., and Beer, M., 'A new scheme combining adaptive Kriging with adaptative variance-reduction using Gaussian mixture importance sampling', KU Leuven. ( abstract, full paper )

---

Vehicle noise and vibration (NVH)

NVH1 - Monday 12 Sep 2022

13:25	Jonckheere, S., Cardenuto, J., van Putten, T., Bériot, H., and Deckers, E., 'Efficient auralization of vibro-acoustic systems with trim package variations', Siemens Digital Industries Software. ( abstract, full paper )
13:50	Werner, D., Schneider, S., Neher, J., Graf, B., and Wender, B., 'Sound radiation of gearboxes - Reasons for deviations between calculated and measured sound power levels in NVH analyses', University of Applied Sciences of Ulm. ( abstract, full paper )
14:15	Donderer, M., Rieß, A., Waldenmaier, U., Neher, J., and Ehlers, S., 'Excitation analysis on resilient mounting eigenmodes of large-bore internal combustion engines', MAN Energy Solutions SE. ( abstract, full paper )
14:40	Fujita, K., and Saito, T., 'Study on the effect of tire vibration characteristics on tire road noise (Consideration on correlation between vibration characteristics and shaft force characteristics)', National Institute of Technology, Ube College. ( abstract, full paper )
15:05	Alkmim, M., Cardenuto, J., Tengan, E., Dietzen, T., van Waterschoot, T., Cuenca, J., and De Ryck, L., 'Sound quality analysis of a drone using a hemispherical microphone array', Siemens Digital Industries Software. ( abstract, full paper )
15:30	Kimpián, T., and Augusztinovicz, F., 'Torsional modal analysis made easy – Methodology and practical examples from electric motor testing', thyssenkrupp Components Technology Hungary Ltd.. ( abstract, full paper )

NVH2 - Tuesday 13 Sep 2022

08:30	Bejar, F., Perret-Liaudet, J., Bareille, O., Ichchou, M., and Fontana, M., 'Influence of various gear blank geometry patterns on the dynamic response of a transmission system', Ecole Centrale de Lyon. ( abstract, full paper )
08:55	Wilkinson, A., Dauchez, N., and Rachik, M., 'Characterization and modelling of the radiation of automotive engine encapsulation materials', Université de Technologie de Compiègne. ( abstract, full paper )
09:20	Ricci, A., Albertz, F., and Bregant, L., 'Flexible hoses dynamic characterization including amplitude and frequency dependency', BMW AG. ( abstract, full paper )
09:45	Pistacchi, L., Rezayat, A., and Park, D., 'Numerical analysis of misalignment and assembly error effects on the acoustic emission of gear transmissions', Siemens Digital Industries Software. ( abstract, full paper )

---

Vibro-acoustic modelling and prediction

VAM1 - Monday 12 Sep 2022

15:55	Girdhar, S., Barnard, A., Blough, J., LoVerde, J., and Dong, W., 'Using a simulation model to guide a new field measurement method with higher reproducibility for standard floor-ceiling impact test methods', Michigan Technological University. ( abstract, full paper )
16:20	Akar, Ö., and Willner, K., 'The modal behavior of violin components', Friedrich-Alexander-Universität Erlangen-Nürnberg. ( abstract, full paper )
16:45	Cai, Y., van Ophem, S., and Deckers, E., 'Model order reduction of time-domain vibro-acoustic finite element simulations with admittance boundary conditions in state-space form', Flanders Make@KU Leuven. ( abstract, full paper )
17:10	Alia, A., Khanyile, N. P., Dufrénoy, P., and De Saxcé, G., 'Vibration and acoustic radiation of an impacted plate: parametric study based on isogeometric analysis', Université de Lille. ( abstract, full paper )
17:35	Deutzer, M., Franke, T., Bartz, R., and Hoffmann, N., 'Frequency assignments of single component eigenmodes through structural modifications based on a novel approach for brake squeal suppression', Volkswagen AG. ( abstract, full paper )
18:00	Andrade Paiva, A. A., van den Nieuwenhof, B., Lielens, G., Rigo, P., and Detandt, Y., 'Vibro-acoustic coupled modal extraction approximation', Hexagon. ( abstract, full paper )

VAM2 - Tuesday 13 Sep 2022

10:10	Jonckheere, S., Elkafafy, M., Atak, O., Bériot, H., Peeters, B., and Desmet, W., 'Efficient black box time domain simulation of frequency domain based vibro-acoustic models', Siemens Digital Industries Software. ( abstract, full paper )
10:35	Vastiau, J., Van hoorickx, C., and Reynders, E., 'Impact sound insulation prediction of finite layered floors with a modal transfer matrix method and a detailed source model', KU Leuven. ( abstract, full paper )
11:00	Wijnant, Y., and Venner, C. H., 'A fast Helmholtz solver for high wavenumbers', University of Twente. ( abstract, full paper )
11:25	Neff, J. C., Garcia-Manrique, J., Gonzalez-Herrera, A., and Lima-Rodriguez, A., 'Numerical simulation on the direct and inverse sound transmission', University of Málaga. ( abstract, full paper )
11:50	Schneider, S., Graf, B., Heinrich, M., Giese, T., and Haralampiev, I., 'Practical application and validation of the time domain boundary element method in acoustics', Ulm University of Applied Sciences. ( abstract, full paper )

VAM3 - Tuesday 13 Sep 2022

15:40	Lainer, M., and Müller, G., 'Coupling of a 2D unsaturated elastodynamic structure with a bending beam by application of the wave based method', Technical University of Munich. ( abstract, full paper )
16:05	Stalmans, W., Van hoorickx, C., and Reynders, E., 'Predicting vibration transmission across finite double-leaf wall junctions', KU Leuven. ( abstract, full paper )
16:30	Joshi, P., and Scharowsky, T., 'Material and component based simplified vibroacoustic analysis approach for double wall application', ZAL Center of Applied Aeronautical Research. ( abstract, full paper )
16:55	Cunha, B. Z., Ichchou, M., Droz, C., Zine, A.-M., and Foulard, S., 'Interpretable and physics-supported machine learning model for sound transmission loss analysis', Ecole Centrale de Lyon. ( abstract, full paper )
17:20	Li, Y., Atak, O., and Desmet, W., 'An efficient formulation of multi-level fast multipole indirect BEM for industrial acoustic problems', Siemens Digital Industries Software. ( abstract, full paper )
17:45	Rice, H., Flanagan, L., Kennedy, J., and Wright, T., 'An acoustic absorption system incorporating fluid-structure interaction', TCD. ( abstract, full paper )

---

Wind turbine dynamics

WIND1 - Tuesday 13 Sep 2022

13:35	Castellani, F., Garibaldi, L., Daga, A. P., and Natili, F., 'Early diagnosis of wind turbine gearbox damages through industrial time-resolved data analysis', University of Perugia. ( abstract, full paper )
14:00	Vettori, S., Machete Gomes, G., Di Lorenzo, E., Peeters, B., and Chatzi, E., 'Influence of the input model for virtual sensing of wind turbine blades', Siemens Digital Industries Software. ( abstract, full paper )
14:25	Bosmans, J., Gallas, S., Rocha de Melo Filho, N. G., Kirchner, M., and Desmet, W., 'Validation of wind turbine gearbox structural FE models through modal analysis at component and (sub-)assembly level', Flanders Make@KU Leuven. ( abstract, full paper )
14:50	Zarnekow, M., Grätsch, T., and Ihlenburg, F., 'Computational simulation of noise emission from wind turbine gearboxes: FE modeling and validation with measurements', BHS Corrugated Maschinen- und Anlagenbau GmbH. ( abstract, full paper )

WIND2 - Wednesday 14 Sep 2022

08:30	Marsick, A., Andre, H., Khelf, I., Leclère, Q., and Antoni, J., 'Improvement of spectral indicators for intermittent cyclic signals with application to bearing faults for wind turbine monitoring', Laboratory of Vibration and Acoustics, INSA Lyon. ( abstract, full paper )
08:55	Dwek, N., Blockmans, B., Croes, J., Pluymers, B., and Kirchner, M., 'Sensor selection for load estimation of a wind turbine pitch bearing', Flanders Make@KU Leuven. ( abstract, full paper )
09:20	Cadoret, A., Denimal, E., Leroy, J.-M., Pfister, J.-L., and Mevel, L., 'Mode shape phase change detection in wind turbine under anisotropy variation', IFP énergies nouvelles. ( abstract, full paper )
09:45	Hansen, J. F., Juul, M. Ø. Ø., and Orlowitz, E., 'Towards an automated OMA testing approach for modal feature extraction for wind turbine blades', Aarhus University. ( abstract, full paper )

---

Poster

POS1 - Monday 12 Sep 2022

13:25	Van Belle, L., Igea, F., Claeys, C., Deckers, E., and Cicirello, A., 'Performance bounds prediction of the vibration attenuation in locally resonant metamaterial beams due to uncertain resonator parameters', Flanders Make@KU Leuven. ( abstract, full paper )
13:25	Maes, K., and Lombaert, G., 'Investigating the feasibility of population-based damage detection for civil engineering structures', KU Leuven. ( abstract, full paper )
13:25	Felix, M., Palomares, E., Morales, A. L., Pintado, P., Melero, M., Nieto, A. J., Ramiro, C., and Chicharro, J. M., 'On the influence of passengers on railway vehicle comfort', University of Castilla-La Mancha. ( abstract, full paper )
13:25	Barsi Palmic, T., and Slavic, J., '3D-printed stacked dielectric actuators capable of highfrequency dynamic operation', University of Ljubljana. ( abstract, full paper )
13:25	Kosova, G., Di Lorenzo, E., Peeters, B., and Kerschen, G., 'Nonlinearity location identification using linear frequency response functions and nonlinear orthogonal projections', Siemens Digital Industries Software. ( abstract, full paper )
13:25	Nitti, M., Peeters, C., Kestel, K., Marini, R., and Helsen, J., 'Blind deconvolution based on higher-order cyclostationarity for vibration-based fault detection', VUB. ( abstract, full paper )
13:25	Taenzer, L., Tallarico, D., Kandiah, A., Van Damme, B., and Bergamini, A., 'Numerical and experimental insights into acoustic emission from a train wheelset', EMPA. ( abstract, full paper )
13:25	Huguet, M., Ture Savadkoohi, A., Lamarque, C.-H., Collet, M., and Rodriguez, J., 'Damage detection of structural elements by time reversal principle', Univ Lyon, ENTPE. ( abstract, full paper )
13:25	Guenka, T. S. d. N., Machado, M. R., Silva, A. M. A., and Araújo, M. A., 'Acoustic characterization of ceramic Al2O3/MgO samples produced via unidirectional freeze-casting', Universidade de Brasília. ( abstract, full paper )
13:25	Hughes, A. J., Bull, L. A., Gardner, P., Dervilis, N., and Worden, K., 'Semi-supervised risk-based active learning using inspection and maintenance information', The University of Sheffield. ( abstract, full paper )
13:25	Staudenmeyer, M., Oexl, S., Baeuerle, S., and Hetzler, H., 'An approach to determine the relative validity of vehicle models of varying complexity in the context of highly automated driving', Daimler Truck AG. ( abstract, full paper )
13:25	Foster, J. A., Decuyper, J., De Troyer, T., and Runacres, M. C., 'Estimating a sparse nonlinear dynamical model of the flow around an oscillating cylinder in a fluid flow using SINDy', VUB. ( abstract, full paper )
13:25	Boldrini, M., Giacoppo, L., Carcaterra, A., Majorana, E., Milana, S., and Akay, A., 'Mechanical oscillator interacting with an acoustic or light beam: challenging nonlinear mechanical models', Università di Roma La Sapienza. ( abstract, full paper )
13:25	Grosso, P., Massaccesi, G., Cavalaglio Camargo Molano, J., Mottola, G., and Borghi, D., 'Signal model of a cycloidal drive for diagnostic purposes', University of Modena and Reggio Emilia. ( abstract, full paper )
13:25	Zanarini, A., 'About the excitation dependency of risk tolerance mapping in dynamically loaded structures', University of Bologna. ( abstract, full paper )
13:25	Guo, Z., Halkon, B., and Clemon, L., 'Effects of infill parameters on the vibration characteristics of additively manufactured specimens', University of Technology Sydney. ( abstract, full paper )
13:25	Juchem, J., and Loccufier, M., 'Imitating a tuned vibration absorber with an Euler-Lagrange controller: comparison of the limitations due to different stability proofs', UGent. ( abstract, full paper )
13:25	Bartfai, A., Kuske, R., and Dombovari, Z., 'On the finite-time stability of dynamic stability loss in a single degree of freedom system', Budapest University of Technology and Economics. ( abstract, full paper )
13:25	McCloskey, A., Guiral, A., Iriondo, J., and Aizpuru, A., 'Noise attenuation prediction and analysis in rectangular lined ducts', Mondragon Unibertsitatea. ( abstract, full paper )
13:25	Serra, R., Cierco, E., Magrans, F. X., Bizzarro, G., and Perazzolo, A., 'Identification of subsystems in a tilt-rotor', Ingenieria para el Control del Ruido SL. ( abstract, full paper )
13:25	Papatheou, E., Tatsis, K. E., Battu, R. S., Agathos, K., Haywood-Alexander, M., Chatzi, E., Dervilis, N., and Worden, K., 'Virtual sensing for SHM: a comparison between Kalman filters and Gaussian processes', University of Exeter. ( abstract, full paper )
13:25	Pierro, E., and Carbone, G., 'Recent advancements in the characterization of the damping properties of linear polymeric materials', University of Basilicata. ( abstract, full paper )
13:25	Miranda Jr., E. J. P. d., and Dos Santos, J. M. C., 'Complex band structure of flexural waves in 2-D metamaterial Kirchhoff-Love plates with shunted piezo-patches', Federal Institute of Maranhão (IFMA). ( abstract, full paper )
13:25	AlQahtani, N. A., Rogers, T. J., and Sims, N. D., 'Feedback control of flexible systems using Bayesian filtering', The University of Sheffield. ( abstract, full paper )
13:25	Sider, A., Dehaeze, T., Watchi, J., Lakkis, M. H., Jamshidi, R., Amorosi, A., Amez-Dro, L., Teloi, M., and Collette, C., 'Compact isolation of a large mirror at low frequency', University of Liege. ( abstract, full paper )
13:25	Sabahi, I., Vermaut, M., Kirchner, M., Croes, J., and Naets, F., 'Selection of the reduction basis and damping matrix for systems with forced excitation', Flanders Make@KU Leuven. ( abstract, full paper )
13:25	Jamshidi, R., Paknejad, A., Pathak, S., Piron, D., and Collette, C., 'Active damping of high modal density of bladed structures with piezoelectric patches', University of Liege. ( abstract, full paper )
13:25	Zhang, S., Devriendt, H., and Van Belle, L., 'Parametric reduced-order modelling of bolted joints for efficient evaluation of pretension and frictional coefficient changes', Flanders Make@KU Leuven. ( abstract, full paper )

POS2 - Tuesday 13 Sep 2022

08:30	Witteveen, W., and Koller, L., 'FRF based iterative coupling of a numerical and experimental mechanical system with moderate nonlinearities', FH OÖ F&E GesmbH. ( abstract, full paper )
08:30	Dipietrangelo, F., Nicassio, F., and Scarselli, G., 'Impact localisation via machine learning in structural health monitoring for aerospace panels', Universita del Salento. ( abstract, full paper )
08:30	Sawicki, B., Karlos, A., and Paćko, P., 'Investigation of the resonant behavior of point attachments on beams', AGH University of Science and Technology. ( abstract, full paper )
08:30	Schroth, R., Wirz, A., and Einbock, S., 'Lifetime calculation for metal wire mesh vibration dampers subjected to cyclic loads', Pforzheim University. ( abstract, full paper )
08:30	Touzet, J., André, H., Bonnardot, F., Chesne, S., and Alata, O., 'Motion estimation of a cantilever beam in the quasi-static case based on the monogenic signal and the Lucas-Kanade optical flow', L.A.S.P.I.. ( abstract, full paper )
08:30	Takhchi, J., Ouisse, M., Sadoulet-Reboul, E., Bouhaddi, N., Gagliardini, L., Bornet, F., and Lakrad, F., 'Vibration propagation analysis in plates using the irrotational intensity field', Stellantis, Femto-st, Hassan 2 university. ( abstract, full paper )
08:30	Konda Rodrigues, G., Gardonio, P., Dal Bo, L., and Turco, E., 'Self-tuning vibration control units using piezoelectric patches and RLC shunts set to maximise electric power absorption', Università degli Studi di Udine. ( abstract, full paper )
08:30	Berghuis, M. W., and Rosic, B., 'Bayesian multi-scale analysis', University of Twente. ( abstract, full paper )
08:30	Bouvet, P., Nélain, B., Thompson, D., Ntotsios, E., Nuber, A., Fröhling, B., Seyfaddini, F., Herremans, G., Reumers, P., Lombaert, G., and Degrande, G., 'The development of a hybrid prediction tool for railway induced vibration', KU Leuven. ( abstract, full paper )
08:30	Bagheri, A. K., Sonneville, V., and Renson, L., 'Computing periodic responses of geometrically nonlinear structures modelled using Lie group formulations', Imperial College London. ( abstract, full paper )
08:30	Watchi, J., Lakkis, M. H., Sider, A., Jamshidi, R., Amorosi, A., Teloi, M., and Collette, C., 'Experimental validation for low frequency isolation of six degree of freedom systems using inertial sensors', University of Liege. ( abstract, full paper )
08:30	Gungl, S., and Kimpian, T., 'Efficient NVH evaluation of electric motors by means of 2D Fourier analysis on the complex representation of airgap forces', thyssenkrupp Components Technology Hungary Ltd.. ( abstract, full paper )
08:30	Auquier, N., Ege, K., and Gourdon, E., 'Dynamical behaviour of multilayered beam with imperfect interfaces: modeling and experimental validation', CeLyA - Univ Lyon. ( abstract, full paper )
08:30	Rothe, S., Hoffmann, S., and Langer, S. C., 'Efficient placement of damping patches based on an identification criterion', TU Braunschweig. ( abstract, full paper )
08:30	Widyastuti, H., and Sedayu, A. F., 'Comparison analysis of indonesian railway track quality index calculation results with european standards (EN) using multibody dynamic system simulation results (Case study: DAOP VIII Lawang - Malang)', Institut Teknologi Sepuluh Nopember. ( abstract, full paper )
08:30	Li, C., Li, S., Zhang, A., Yang, L., Liu, C., and Gryllias, K., 'A multiscale hybrid model for intelligent bearing fault diagnosis with fine-grained categories', Flanders Make@KU Leuven. ( abstract, full paper )
08:30	Zhang, Z., Denayer, H., Claeys, C., and Deckers, E., 'A Fourier decomposition model predicting sound transmission and reflection of locally reacting acoustic periodic materials', Flanders Make@KU Leuven. ( abstract, full paper )
08:30	Saleh, T., Joshi, P., Klärner, M., and Scharowsky, T., 'An efficient vibroacoustic analysis of aerospace structure excited by turbulent boundary layer with pressure gradients', ZAL Center of Applied Aeronautical Research. ( abstract, full paper )
08:30	Blachowski, B., Ostrowski, M., Mikulowski, G., and Jankowski, L., 'Mode matching vs Bayesian approach for model updating of frame structure with uncertain bolted connections', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstract, full paper )
08:30	Gaborit, M., Lundberg, E., and Göransson, P., 'Controlled anisotropy materials and 3D printing: experimentations and analyses', Université du Mans. ( abstract, full paper )
08:30	Cavalaglio Camargo Molano, J., Fonte, C., Scurria, L., Tamarozzi, T., and Cocconcelli, M., 'A multibody bearing model of an independent cart conveyor system', University of Modena and Reggio Emilia. ( abstract, full paper )
08:30	Akay, M. S., Shaw, A. D., and Friswell, M. I., 'Exploration of overhung rotor bouncing cycles with cubic and tanh-contact nonlinearities using numerical continuation', Swansea University. ( abstract, full paper )
08:30	Ali, J., Chelliah, T. R., and Agarwal, P., 'Electromagnetic noise and vibration synthesis for wind power generator', . ( abstract, full paper )
08:30	da Silva, D. M. D., Avila, S. M., and Morais, M. V. G., 'Magneto rheological damper semi-active system in automotive suspension', Universidade de Brasília UnB. ( abstract, full paper )
08:30	Langrand, C., Albert, A., and Masset, M., 'Exploiting sound signals for fault diagnosis of an on-site machining operation', Tacquet Industries. ( abstract, full paper )
08:30	Bürger, L., Vanspauwen, W., and Naets, F., 'Analysis of tire friction modelling for high fidelity nonlinear and lower level tire models', Flanders Make@KU Leuven. ( abstract, full paper )
08:30	Tavares, A., Di Lorenzo, E., Cornelis, B., Peeters, B., Desmet, W., and Gryllias, K., 'Damage assessment on wind turbine blades using machine learning techniques', Siemens Digital Industries Software. ( abstract, full paper )

POS3 - Tuesday 13 Sep 2022

13:35	Neri, P., Paoli, A., and Santus, C., 'Bandpass high frequency blisk vibration measurement by down-sampeld stereo-DIC acquisitions', University of Pisa. ( abstract, full paper )
13:35	Strozzi, M., Grosso, P., Mottola, G., and Rubini, R., 'Reliability of a resistance spot welding process based on characteristics parameters', University of Modena and Reggio Emilia. ( abstract, full paper )
13:35	Wu, W., Malik, M. K., Cantero-Chinchilla, S., Lawrie, T., Yan, W. J., Tanner, G., Remenyte-Prescott, R., and Chronopoulos, D., 'A physics-based approach for damage identification in plates based on guided wave scattering predictions and inverse Bayesian inference', The University of Nottingham. ( abstract, full paper )
13:35	De Carolis, S., Messina, A., and Soria, L., 'R-FRF-based modal analysis: additional modal parameters for local diagnoses of perturbated systems', Politecnico di Bari. ( abstract, full paper )
13:35	Milana, S., Roveri, N., Culla, A., and Carcaterra, A., 'Model-free experimental damage identification by Symbolic Data Analysis', Università di Roma La Sapienza. ( abstract, full paper )
13:35	Qu, F., Van Belle, L., and Deckers, E., 'A unit cell wave based reduced order modelling approach for fast vibration response calculations of finite periodic metamaterial plates', Flanders Make@KU Leuven. ( abstract, full paper )
13:35	Rizzetto, E., and Carassale, L., 'Processing non-synchronous vibrations of blade tip timing data by independent component analysis', Università di Genova. ( abstract, full paper )
13:35	Panagiotopoulos, D., and Deckers, E., 'A parametric model order reduction strategy for impedance parametrizations in acoustic BEM simulations', Flanders Make@KU Leuven. ( abstract, full paper )
13:35	Miah, M. S., and Lienhart, W., 'Unscented Kalman filter to deal with exaggerated states and parameters uncertainties', Graz University of Technology (TU Graz). ( abstract, full paper )
13:35	Palanivelu, S., and Dandekar, R., 'Experimental procedure for benchmarking of tires for vehicle floor vibration using transfer path analysis', Vellore Institute of Technology, Vellore. ( abstract, full paper )
13:35	Çatak, N. O., and Arslan, E., 'Numerical and experimental studies on stiffening via improving the natural frequency of compressor inverter box for refrigerator', Arcelik Global. ( abstract, full paper )
13:35	Zhou, Y., Chen, Q., Shi, X., Martin, D., and Bertsche, B., 'Numerical and experimental study of passive torsional vibration palliations and elimination of high-sensitive rattle noise in dual-clutch transmission powertrain', Chongqing University. ( abstract, full paper )
13:35	Kunte, D. S., Cornelis, B., Colangeli, C., De Veuster, C., and Gryllias, K., 'Transfer learning for unsupervised booming noise classification', Siemens Digital Industries Software. ( abstract, full paper )
13:35	D'Elia, G., Proner, E., and Mucchi, E., 'Accelerated random fatigue testing by means of a tri-axial electrodynamic shaker: solutions for combing the multiple test specifications', University of Ferrara. ( abstract, full paper )
13:35	Wachter, R., Werner, U., Herzog, H.-G., and Bauer, C., '1D-Simulation and experimental validation of active vibration damping of an induction motor mounted on an elastic steel frame foundation using modified integral controllers', Nuernberg Tech. ( abstract, full paper )
13:35	Bacsa, K. D., Lai, Z., Liu, W., and Chatzi, E., 'Symplectic encoders for variational inference in nonlinear dynamics systems', ETH. ( abstract, full paper )
13:35	Callens, R., Moens, D., and Faes, M. G. R., 'Multilevel Quasi-Monte Carlo for interval analysis in structural dynamics', KU Leuven. ( abstract, full paper )
13:35	Pike, X., and Cheer, J., 'Machine learning based plant identification of a nonlinear two-degree-of-freedom system for active vibration control', ISVR - Southampton University. ( abstract, full paper )
13:35	Tallarico, D., Van Damme, B., Taenzer, L., and Bergamini, A., 'Insights into the contact point mobility of the railway superstructure treated as a periodic medium', EMPA. ( abstract, full paper )
13:35	Taylor, C., DeClerck, J., Blough, J., Morgan, L., and Joshua, R., 'Designing, building and validating adjustable tuned absorbers', Michigan Technological University. ( abstract, full paper )
13:35	Verstraelen, E., Geuzaine, M., Denoël, V., Toussaint, P., Auguste, T., and Simon, D., 'LYRA: an autonomous bridge stays and hangers monitoring solution', V2i. ( abstract, full paper )
13:35	Claro, D. S., Denis, V., and Mencik, J.-M., 'A wave finite element strategy based on time of flight analysis to localize defects in networks of pipes', Institut national des sciences appliquées Centre Val de Loire. ( abstract, full paper )
13:35	Gabos, Z., Dombovari, Z., and Gazdagh, Z., 'Case study on experimental identification of a single degree of freedom nonlinear mechanical system', Budapest University of Technology and Economics. ( abstract, full paper )
13:35	Lengger, M., and Willner, K., 'Reduced order modeling for bolted structures', FAU Erlangen-Nuremberg. ( abstract, full paper )
13:35	Bonney, M., Jamia, N., and Mills, R., 'Experimental considerations for thermal effects on frictional interfaces', The University of Sheffield. ( abstract, full paper )
13:35	Li, D., and Rixen, D. J., 'In-operational damage detection and localization of the wind turbine by using the self-tracking scanning laser vibrometer', TUM. ( abstract, full paper )
13:35	Jones, M. R., Rogers, T. J., Worden, K., and Cross, E. J., 'Enhanced uncertainty quantification for acoustic emission localisation', University of Sheffield. ( abstract, full paper )

---