List of accepted papers

We have received many more abstracts than we can schedule into our technical programme. As a result, we have had to reject a considerable number of abstracts of which several potentially interesting works. A list of accepted abstracts is available below sorted by the 11 high-level conference topics which authors submitted their abstract to. Authors of these accepted abstracts will receive email instructions on how to further prepare their full paper contributions. A more detailed oral and poster presentation overview, scheduled in dedicated conference sessions, will be communicated by summer.

Authors in bold are the submission's presenting author.

Approaches and applications in monitoring, diagnostics & prognostics

  • Anastasopoulos, D., and Reynders, E. P. B., 'Automated strain-based operational modal analysis of a vierendeel truss bridge: influence of ambient factors vs. damage', KU Leuven.
  • Baldini, S., Bernardini, R., Fusiello, A., Gardonio, P., and Rinaldo, R., 'Vibration measurement with event cameras', Università degli Studi di Udine.
  • Baqersad, J., and Rouhollahi, F., 'A non-invasive characterization approach based on digital twin developed using vibration-response', Kettering Unviersity.
  • Belur, M. Y., Kefal, A., Fassois, S. D., and Spiliotopoulos, P., 'Robust full-field modal testing method for structural health monitoring of aerostructures under random noise', Sabanci University.
  • Bittner, W., Slimak, T., and Jung, H., '3d mode shape visualization using dynamic gaussian splatting and motion magnification', Technical University of Munich.
  • Brunnmayr, F., and Mikota, G., 'Theoretical and experimental modal analysis applied to the arterial system of the human body', Johannes Kepler University.
  • Burel, A., Thibault, N., Bourdon, A., Lecouvreur, D., Neveux, N., and Rémond, D., 'Hybrid numerical model for rotor-bearing-casing interaction in rotating machinery: transfer path study and application to condition monitoring', INSA Lyon, Université de Lyon.
  • Candelaresi, D., Kosova, G., Di Lorenzo, E., Annessi, A., Martarelli, M., and Castellini, P., 'Variance-based techniques for defect detection in metal additive-manufactured components using a resonance testing system', Università Politecnica delle Marche, Siemens Digital Industries Software.
  • Case, J. A., and Barnard, A., 'Impulsive event detection: marine and lacustrine ice fracturing', Penn State.
  • Castellani, F., and Belcastro, F., 'Wind turbine pitch misalignment detection through tower vibration signal processing', University of Perugia.
  • Chabanet, S., Orta, A., and Kersemans, M., 'Quality control of 3d printed ti parts based on resonant testing and clustering ensembles', UGent.
  • Chaudhary, B., and Tandel, B. N., 'A gis-based approach for mapping of urban road traffic noise', Sardar Vallabhbhai National Institute of Technology, Surat.
  • Chiarelli, M., Boes, R. M., Vetsch, D. F., and Münch-Alligné, C., 'Identification of natural frequencies of pelton runners during transient operating conditions', HES-SO.
  • CHU, Z., LUO, M., Guillet, F., and ANDRE, H., 'A novel simulation method for encoder signals in ias monitoring applications', Université Jean Monnet.
  • Clavelo Elena, B., Maes, K., Martín Rodríguez, P., Elena Parnás, V., and Lombaert, G., 'Model-based wind load estimation on a tall guyed mast using a frequency-domain approach', KU Leuven.
  • Dardeno, T. A., Bull, L. A., Dervilis, N., and Worden, K., 'Transfer learning via intermediate structures', The University of Sheffield.
  • De Fabritiis, F., and Gryllias, K., 'A self-learning approach from vibrations for conditional monitoring', KU Leuven.
  • Delo, G., Surace, C., and Worden, K., 'Knowledge sharing for improving damage identification across a population of heterogeneous laboratory-scale aircraft models', Politecnico di Torino.
  • Deonarain, G., Blough, J., and Labyak, D., 'Defect detection in additively manufactured parts using frequency domain-based correlation criteria', Michigan Technological University.
  • Deonarain, G., Blough, J., and Labyak, D., 'Effect of testing and analysis parameters on efficiency and sensitivity of fdac for defect detection', Michigan Technological University.
  • Döbler, D., Schmidt, P., Ullrich, E., and Turan, C., 'Ar-based setup of vibration sensors in test rigs', GFaI e.V..
  • Donderer, M., Rieß, A., Waldenmaier, U., Neher, J., and Ehlers, S., 'Participation factor based identification of mode shapes', MAN Energy Solutions SE.
  • Dubber, K., Waters, T., and Ferguson, N., 'The effects of model reduction on the shock response spectra of multi-modal structures', University of Southampton.
  • Durandt, G., and Bekker, A., 'Validation of a stress predictor algorithm on a polar vessel', Stellenbosch University.
  • El Amli, A., El Yousfi, B., Soualhi, A., and Guillet, F., 'Estimation of gear mesh stiffness in spur gears through finite element model and analytical approach', Jean Monnet university.
  • Erdélyi, J. A., Farkas, M., and Fukker, B., 'Self-training anomaly detection in vibrational and acoustic data', Robert Bosch Kft..
  • Feng, Z., Zhang, J., Shi, S., and Hua, X., 'Efficient bayesian modal identification for long-span bridges: a novel bayesian spectral decomposition approach', Hunan University.
  • Gabrielli, A., Battarra, M., Mucchi, E., and Dalpiaz, G., 'An algorithm based on digital twin sets of solutions for rolling-element bearing prognostics', University of Ferrara.
  • Giovannardi, E., Delvecchio, S., Cavina, N., Colangeli, C., Cornelis, B., and Janssens, K., 'Full vehicle nvh end-of-line testing and data-driven fault analysis of the ferrari sf90 stradale front e-axle', Ferrari S.p.A..
  • Gothard, A. T., Wall, C., Cobble, G., Henderson, R. C., Anton, S. R., Cardinal, M., and Taggart, A., 'Initial validation of a local structural dynamics monitoring system for smart buildings', Tennessee Technological University.
  • Gower, A. L., Kent, J., and De Carvalho Loures, M., 'A tomographic method to predict forces in a rolling element bearings', University of Sheffield.
  • Grosso, P., Fonte, c., D'elia, G., and Cocconcelli, M., 'Cycloidal gearbox diagnostics through multibody model', University of Modena and Reggio Emilia.
  • Guo, Y.'Using rotary encoder signals for rv reducer cycloidal gear fault detection', Kunming University of Science and Technology.
  • Haladin, I., Burnać, K., Baniček, M., and Trifunović, N., 'The possibility of using machine learning for network-wide predictive maintenance of urban railway tracks', University of Zagreb, Faculty of Civil Engineering.
  • Hosseinli, S. A., Ooijevaar, T., and Gryllias, K., 'Remaining useful life prediction of bearings under varying operating conditions using digital twin-based deep learning', KU Leuven.
  • Hughes, A. J., Tsialiamanis, G., Dervilis, N., and Worden, K., 'Towards an active-learning approach to resource allocation for population-based damage prognosis', University of Sheffield.
  • Jabbar, A., Fonte, C., D'Elia, G., and Cocconcelli, M., 'Ball-bearings fault detection for an independent cart system: experimental campaign and preliminary results', University of Modena and Reggio Emilia.
  • Janot, D., Vieux-Champagne, F., Gueguen, P., and Boudaud, C., 'Monitoring and modeling of the vibratory behavior of high-rise timber building', Laboratoire 3SR.
  • Jedlińska, A., Błachowski, B., Mikułowski, G., Pisarski, D., and Jankowski, Ł., 'Damage detection in a semi-active structural control system based on reinforcement learning', Institute of Fundamental Technological Research Polish Academy of Sciences.
  • Jensen, A. M. D., Schoerghofer-Queiroz, A., Abbiati, G., Ulriksen, M. D., Tcherniak, D., Damkilde, L., Talasila, P., and Larsen, P. G., 'Digital twin as a service for damage prognosis of offshore wind turbine foundations', Aarhus University.
  • Jia, L., Cornelis, B., and Gryllias, K., 'Validation of timeseries anomaly detection methods for automated detection of measurement errors in noise and vibration testing', Siemens Industry Software NV.
  • Kakolyris, G., Fassois, S. D., Kefal, A., and Belur, M. Y., 'Random vibration based robust structural health monitoring for a composite wing-shaped structure under temperature uncertainty', University of Patras.
  • Karkafi, F., Leiber, M., Leclère, Q., Antoni, J., and El Badaoui, M., 'A two-step synchro-squeezing transform approach mitigating reallocation errors in time-frequency analysis', Safran.
  • Kent, C., O'Higgins, C., Hester, D., Taylor, S., and Woods, R., 'Using readily available shm data to gain insights into the dynamic behaviour of bridges', Queen's University Belfast.
  • Kirouac, M., Venne, K., and Arezki, M., 'A first-level acoustical diagnostic tool for hydroelectric generators', Hydro-Québec.
  • Konstantinou, X., Kritikakos, K., Lee, C. F., Sakaris, C. S., Sakellariou, J. S., Schlanbusch, R., and Ong, M. C., 'Vibration-based structural health monitoring of the mooring lines in a floating offshore wind turbine under varying environmental conditions: neural networks vs multiple model based methods', University of Patras.
  • Kramti, S. E., André, H., El Badaoui, M., Sayadi, M., and Bechhoefer, E., 'Advancements in bearing diagnostics: harnessing angular signal synchronization for enhanced pseudo-cyclo-stationary analysis', Université de Lyon, Université Jean Monnet de Saint-Etienne, LASPI EA 3059,.
  • Kullaa, J.'Issues in damage detection using autocovariance functions', Metropolia University of Applied Sciences.
  • Kunte, D. S., Marx, D. G., Cornelis, B., Colangeli, C., and Gryllias, K., 'Fault location-guided classification in drivetrains and full vehicles for robust fault detection with limited data', Siemens Digital Industries Software NV.
  • Kurka, P., and VonHuelsen, L., 'Railway track matching through curvature correlation', Universidade Estadual de Campinas.
  • Lakra, A. M., and B, R.'Vibration based identification of breathing cracks using time frequency analysis', NIT Calicut.
  • Lucchese, A., D'Elia, G., Rubini, R., and Cocconcelli, M., 'Exploiting non-gaussian distributions in hidden markov model for bearing prognostics', University of Modena and Reggio Emilia.
  • M. Lima, L. P., and Park, G., 'Combining contact and non-contact sensing for monitoring of large, thin structures', Chonnam National University.
  • Maes, K., Verbist, K., Berten, K., Reynders, E., and Lombaert, G., 'The use of strain-based unit influence lines for structural health monitoring of railway bridges', KU Leuven.
  • Maljaars, E., Ravesloot, J., Janssen, A. C. F., Mol, H. A., Murguia, C. G., and Fey, R. H. B., 'On the potential of bearing strain signals for defect severity estimation: modeling and experiments', SKF B.V..
  • Marasco, G., Sen, D., and Pakzad, S., 'On uncertanity in bridge life cycle assessment with graph neural networks', lEHIGH uNIVERSITY.
  • Marsick, A., Andre, H., Khelf, I., Alloin, L., Leclere, Q., and Antoni, J., 'Pseudo-cyclostationarity of damaged bearing ias signals: cage resynchronisation & synchronous average', Laboratoire Vibrations Acoustique.
  • Martinelli, C., Soderqvist, A., and Cammarano, A., 'Using transfer learning in physics informed neural networks for online structural health monitoring', University of Strathclyde.
  • Marx, D., Kunte, D., Cornelis, B., and Gryllias, K., 'Integrating domain knowledge into semi-supervised anomaly detection methods using differentiable signal processing', KU Leuven.
  • Matthys, J., Protopapadakis, G., Peeters, C., Sterckx, J., and Helsen, J., 'Comparative analysis of vibration and angular speed signals using synchronized data acquisition for bearing fault detection', Vrije Universiteit Brussel.
  • Michalak, A., Hebda-Sobkowicz, J., Wodecki, J., Zimroz, R., Dybkowski, M., Szabat, K., Wolkiewicz, M., and Wylomanska, A.'Statistical test for cyclostationarity based on csc-based indicators- application to vibration signals from electric motor', Wroclaw University of Science and Technology.
  • Mora, B., and Basurko, J., 'Force virtual sensing applied to a structure excited by an inertial shaker', Ikerlan S.Coop.
  • mostafavi, a., and Friedmann, A., 'Bayesian convolutional neural network models for uncertainty-aware bearing fault detection', Fraunhofer LBF.
  • Neri, P.'Digital image correlation algorithms: spatial domain versus frequency domain approach', University of Pisa.
  • Pancaldi, F., D'Elia, G., and Cocconcelli, M., 'Harmonic-percussive source separation for fault detection in ball bearings characterized by cyclic polynomial motion law', University of Modena and Reggio Emilia.
  • Papatheou, E., Tsaliamanis, G., Manson, G., Battu, R. S., and Worden, K., 'On the use of synthetic data for shm: a short investigation on a laboratory structure', University of Exeter.
  • Paprocki, C. A., Barnard, A., Dare, T., Cody, K., and Newman, P., 'Acoustic source separation of transient events from background noise', Penn State.
  • Ramaswamy, R. K., Dandapani, R., Manappallil Joy, V., and K P, R., 'Automated faults detection system for rotating machinery using convolutional neural network with hyperparameters optimised by metaheuristics algorithms', National University of Science and Technology.
  • Reynders, E., Godeau, J., Jovanović, B., Vastiau, J., van de Velde, M., Anastasopoulos, D., Lombaert, G., Caspeele, R., and Van Coile, R., 'Vibration-based condition assessment of concrete beams after fire loading', KU Leuven.
  • Rosa, S., Martini, A., Gioviti, P., Rivola, A., and Troncossi, M., 'Condition monitoring of a broaching machine through machine learning classification of a limited dataset vibration signals', University of Bologna.
  • saiah, h.'Torsional vibrations: early fault detection applied to turbines, pistons engines, and torque evaluation', IMPEDANCE-DATAVIB.
  • Salvi, J., and Rinaldi, L., 'Early experiences in monitoring systems for offshore platforms: towards an integrated approach for asset integrity and model updating', Solgeo S.r.l..
  • Saramantas, I. E., Fassois, S. D., Sakellariou, J. S., Iliopoulos, I. A., and Serpanos, D. N., 'On the fault detection and isolation in multiple vibration sensors for robust structural health monitoring of composite aerostructures under varying excitation', University of Patras.
  • Severa, L., Milana, S., Roveri, N., Culla, A., and Carcaterra, A., 'Best features extraction for ml-based structural health monitoring', Sapienza University of Rome.
  • Sharma, J. K., and Deraemaeker, A., 'Comparative analysis of time stretching and mwcs techniques for compensation of environmental effects in structural health monitoring of concrete infrastructure', Université Libre de Bruxelles.
  • Shiri, H., Zimroz, P., Wylomanska, A., and Zimroz, R., 'Robust remaining useful life prediction from time-varying health index in presence of heavy-tailed noise', Wroclaw university of science and technology.
  • Silva, T. A. N., and Amaral, P., 'Data-driven damage assessment using a cloud of spheres algorithm', NOVA FCT - UNIDEMI.
  • Smith, W., Borghesani, P., Randall, R., Antoni, J., El Badaoui, M., and Peng, Z., 'Bearing diagnostics in high speed applications', University of New South Wales.
  • Spiliotopoulos, P. E., Fassois, S. D., and Sakellariou, J. S., 'On the functional model based method for robust damage detection via random vibration signals under unobservable operating conditions', University of Patras.
  • Trapp, A., Schmidt, D., and Wokusch, S., 'Bispectral analysis of envelopes – a very efficient algorithm for detecting cyclo-stationary components under noise', Siemens Mobility GmbH.
  • van de Velde, M., Vandecruys, E., Verstrynge, E., Reynders, E., and Lombaert, G., 'The influence of pre-existing corrosion damage on vibration-based monitoring during mechanical load-testing of reinforced concrete beams', KU Leuven.
  • Verwimp, T., Wu, X., Mauricio, A., and Gryllias, K., 'Rotational speed estimation by exploiting smartphone sensors', KU Leuven.
  • Vrtač, T., Ocepek, D., Čepon, G., and Boltežar, M., 'A hybrid modeling strategy for training data generation in machine learning-based structural health monitoring', University of Ljubljana, Faculty of Mechanical Engineering.
  • Worden, K.'On the topology and geometry of population-based shm', University of Sheffield.
  • Wrzask, K., Tavares, A., Di Lorenzo, E., Branner, K., and Łuczak, M., 'Frequency domain operational modal analysis methods for fatigue damage progression in laboratory tests of wind turbine blade', Gdańsk University of Technology.
  • Xie, K., and Cheng, L., 'Dynamic mode aware phased-based motion magnification', University of Groningen.
  • Xu, D., Renson, L., and Schwingshackl, C., 'Rotor state monitoring in full-scale industrial turbomachinery using component-based transfer path analysis', Technical University of Munich.
  • Zanetti, M., Negri, D., Vandepitte, D., Tita, V., and De Medeiros, R.'Analyzing the influence of delamination on composite structures using modal analysis and statistical indices', Santa Catarina State University - UDESC.
  • Zhu, R., Maele, D. V., Poletto, J. C., Baets, P. D., and Gryllias, K., 'Development and evaluation of vibration indicators for gear pitting detection', KU Leuven.
  • Zulawinski, W., Kuzio, D., Zimroz, R., and Wylomanska, A., 'New health indicator based on robust spectral coherence maps for prognosis of degradation process in highly impulsive environment', Wroclaw University of Science and Technology.

Case studies in noise and vibration engineering

  • Altshul, G., Guskov, M., Balmes, E., and Lorong, P., 'Milling robot modal analysis in context of its response nonlinearity', PIMM.
  • Arnoult, T., Zamponi, R., Glabeke, G., Toulorge, T., Jovanovic, V., Schram, C., and Planquart, P., 'Aeroacoustic measurements of a high-lift model with different slat track geometries', Von Karman Institute for Fluid Dynamics.
  • Askari, M., Ghandchi Tehrani, M., Brusa, E., Carrera, A., and Delprete, C., 'A novel multimodal piezoelectric vibration energy harvester integrated with a practical read-out circuit', University of Groningen.
  • Baldini, S., Guernieri, G., Gorjup, D., Gardonio, P., Slavič, J., and Rinaldo, R., 'Reconstruction of cylinder flexural vibration and sound radiation fields from multi-view single-camera measurements', Università degli Studi di Udine.
  • Balmes, E., Martin, G., and Vo Van, O., 'Non-linear viscoelastic damping: going from material tests to transient simulation of a rail track', ENSAM / SDTools.
  • Bartfai, A., Munoa, J., and Dombovari, Z., 'Experimental study of low frequency chatter vibrations in robotic milling', Budapest University of Technology and Economics.
  • Becht, P., De Smet, B., Schmidt, S., and Blockmans, B., 'Tonality spread of wind turbines due to production and measurement tolerances', ZF Wind Power.
  • Berkhoff, A.'Decentralized feedback damping with distributed control applied to ducts and anechoic chambers', University of Twente.
  • Campos, N. B. F., and Dos Santos, J. M. C., 'Modeling thin plate phononic crystal by the spectral element method', UFABC - Federal University of ABC.
  • Chakroun, A. E., Battarra, M., and Mucchi, E., 'Numerical and experimental study of the vibration performance of an axial piston pump considering the impact of the use of flexible pipes', University of Ferrara.
  • Cibrario, L., Gastaldi, C., Cozza, I. F., Delprete, C., and Scarpa, F., 'A multi-scale homogenization-based approach for dynamic simulation of lattice metamaterials', Politecnico di Torino.
  • Cillo, P., Ziegler, P., and Eberhard, P., 'Geometrical parameterization of a finite element model to account for material variability in classical guitar design', University of Stuttgart.
  • Corno, M., Becht, P., Blockmans, B., and Naets, F., 'A novel approach for accelerated system-level simulation in wind turbine powertrain testing: analyzing responses to cardan shaft-induced vibrations', KU Leuven.
  • Cunha, B. s. c., and de Lima, A. M. G., 'Influence of partial treatment on curved plates with viscoelastic sandwich panels in aeroelastic systems using the nonplanar doublet-lattice method under subsonic regime', Federal University of Uberlândia.
  • Danforth, S. M., Johnson, S. M., Fenstermacher, K. F., Ramirez, A. J., Sedillo, H. R., Schultze, J. F., and Ferguson, E. W., 'Developing methods for single-axis base excitation vibration testing with additional distributed shakers', Los Alamos National Laboratory.
  • de La Bigne, M., Cattan, E., Ghenna, S., Zwingelstein, M., Grondel, S., and Thomas, O., 'A new design of a nav with resonant vibrating wings', IEMN.
  • Decobert, F., Bemol, L., and Faye, D. S.'Development of multiaxial vibration test systems for small objects', SEREME.
  • Dewangan, A., and Kartik, V., 'Contact loss analysis of pantograph-catenary system using a moving point load problem', Indian Institute of Technology Bombay.
  • Faraj, R., Mikułowski, G., Wiszowaty, R., and Graczykowski, C.'Adaptive mitigation of unknown dynamic excitation using pneumatic damper with proportional piezoelectric valve', Institute of Fundamental Technological Research, Polish Academy of Sciences.
  • Gao, Y., Ziegler, P., and Eberhard, P., 'A numerical model for reconstructing the transport-induced vibration of paintings on a testbed', University of Stuttgart.
  • Gürses, K.'Investigation of the effects of a diesel engine idle speed on the vibration characteristics of an ins mounting plate', Roketsan Inc..
  • Hense, A., Chauvicourt, F., van Ophem, S., and Deckers, E., 'Evaluation of machine learning techniques for the nvh design of electric vehicle battery', Siemens Digital Industries Software.
  • Herfert, D., Krause, J., Henning, K., and Gollnick, M., 'Examining the dynamic characteristics of a tennis racket through high-speed videos', GFaI e.V..
  • Hong, G., and Hwang, J., 'Heavy weight floor impact sound tests of steel fiber reinforced concrete slabs', Hoseo University.
  • Jiang, J., and Xiong, Y., 'Dynamic topology optimization of arbitrarily-shaped 3d structures using a newly developed numerical framework in abaqus environment', Universtiy of Southampton.
  • Kabirian, Z., Carneiro, D., Degrande, G., and Lombaert, G., 'Mitigation of environmental ground vibration in layered soils using seismic metasurfaces', KU LEUVEN.
  • Karl, T., and Sachau, D., 'Comparisson of feedback and feedforward active noise control concepts in a partially open window application', Helmut-Schmidt-University Hamburg.
  • Khelifi, A.'Acoustic stealth of armoured vehicles – test, modelling and parametric analysis', KNDS.
  • Kras, A., and Gardonio, P., 'Flywheel inertial vibration absorber', Silencions.
  • Kumar, S., and Kumar, A., 'Vibration attenuation in aesa radar transmit/receive module via particle damping: an experimental study', IIT Roorkee.
  • Lainer, M., and Müller, G., 'A wave based method for the modelling of two canyons exposed to an oblique incident wave front', Technical University of Munich.
  • León, D. R., Palomares, E., Morales, A. L., Nieto, A. J., Chicharro, J. M., and Pintado, P., 'On the influence of speed and track quality on the comfort index treated as a stochastic variable for railway vehicles', Universidad de Castilla-La Mancha.
  • Levin, S., and Halevi, Y.'An alternative method for finite dimension models of flexible structures via pade$'$ approximation', Technion and Shenkar.
  • Li, P., Zeng, Z., and Ye, M., 'Elastic wave propagation characteristics of periodictrack structure in urban rail transit', Central South University School.
  • Liupekevicius Carnielli, R., van Dommelen, H., Geers, M., and Kouznetsova, V., 'Multiscale approach for transient wave propagation in metamaterials with subwavelength resonances', Eindhoven University of Technology.
  • Mahmud, M., Dirhamsyah, M., Abdullah, S., and Rizal, M., 'The analysis of design feature with vibration signal feature on 3d printing machine', Aceh Polytechnic.
  • Manterola, J., Usabiaga, H., Leciñana, I., and Olave, M., 'Vibration fatigue analysis of laser welds on battery modules', IKERLAN.
  • Mao, H., Holmén, A., Yin, B., Rumpler, R., Tibert, G., and Göransson, P., 'Inverse characterization of thermal elastic moduli of anisotropic lattice metamaterials: designing dual-functional metamaterials with near-zero thermal expansion and vibration mitigation capabilities', KTH Royal Institute of Technology.
  • Mao, H., Larsson, J., Yin, B., Rumpler, R., Tibert, G., and Göransson, P., 'Optimization of 3d lattice metastructures based on distorted kelvin cell for low-frequency vibration suppression', KTH Royal Institute of Technology.
  • Mariotti, P., Rumpler, R., and Mao, H., 'A modified bayliss-turkel absorbing boundary condition for non-spherical truncated boundaries of acoustic problems and fast frequency sweeps', KTH - Royal Institute of Technology.
  • Mastrodicasa, D., Morrone, A., Di Lorenzo, E., Cosco, F., Peeters, B., Guillaume, P., and Colangeli, C., 'Reconstruction of the sound radiation field from plate dic vibration measurements', Siemens Industry Software NV.
  • Melero, M., Nieto, A. J., Morales, A. L., Jimenez, J., Ramiro, C., and Pintado, P., 'Experimental analysis of passive damping techniques applied to a cantilever beam using piezoelectric patches and constrained layer damping', Universidad de Castilla-La Mancha.
  • Mikułowski, G., Ostrowski, M., Blachowski, B., and Jankowski, Ł., 'Semi-active control of modal energy transfer by means of lockable joints:­ experimental verification', Institute of Fundamental Technological Research, Polish Academy of Sciences.
  • Montava Belda, I., Segura Alcaraz, J. G., Juliá Sanchis, E., and Gadea Borrell, J. M., 'Acoustic absorption of panels made of agglomerated olive leaves with a polymer matrix', Universitat Politècnica de València.
  • Monteiro, W. O., Nobrega, E. D., and Santos, J. M.'Modeling and numerical analysis of waveguides in defective phononic crystal lattice structures', University of Campinas.
  • Moons, S., Lanoye, R., and Reynders, E., 'A wave-based approach to predict the vibration transmission across junctions with elastic interlayers', KU Leuven.
  • Nunes, J. T. T., Policarpo, H., Neves, M. M., and Maia, N. M. M., 'Frequency-domain estimation of acoustic and vibro-acoustic responses using transmissibility functions and few sensors', IDMEC.
  • Ogun, O., and Kennedy, J., 'The influence of dataset generation on the performance of deep learning for amm design', Trinity College Dublin.
  • Ortis, L., Gardonio, P., Rustighi, E., Malacarne, C., and Perini, M., 'Vacuum plant for structured fabric tva', Università degli Studi di Udine.
  • Ostrowski, M., Blachowski, B., Mikułowski, G., and Jankowski, Ł., 'Semi-active control of modal energy transfer by means of lockable joints: theory and applications', Institute of Fundamental Technological Research of the Polish Academy of Sciences.
  • Ota, H., Sato, T., and Niita, S., 'Calculation of excitation forces generated by axial flow fan system', Tokyo Denki University.
  • Peri, L., Pagano, M., Dozio, L., and Nali, P., 'A hybrid dual-stage model order reduction and substructuring scheme involving craig-bampton method and balanced truncation', KU Leuven.
  • Pierro, E., and Carbone, G., 'Thermal fluctuations of nano cantilevers for the detection of the biological particles modifications', University of Basilicata.
  • Puhwein, A. M., Jakab, B., and Varga, M., 'Investigation of the dynamic behavior of the doctor blades on a modified pin-on disc tribometer via vibrometers and high-end cameras', AC2T research GmbH.
  • Ratke, X., and Sattel, T., 'Vibration reduction design approach for motor-driven fans using piezoelectric actuators including identification, model order reduction and optimization', TU Ilmenau.
  • Roberjot, J., Chevallier, G., Sadoulet-Reboul, E., Peyret, N., Bachy, E., Arnould, C., Collard, E., and Jaboviste, K., 'Multiaxial locking suspensions through thermo-adaptive polymers', Femto-st / Thales LAS.
  • Rossini, M., De Marco, M., Prodi, N., and Acri, A., 'Sound quality analysis of door and drawer openings on washing machines', Università di Ferrara.
  • Sahana, S., Singh, A., and Bhattacharya, B., 'Variable cross-section metabeam with resonators for enhanced vibration attenuation capabilities', Indian Institute of Technology Kanpur.
  • Sayyad khodashenas, N.'Experimental investigation of ambient sound on the non-linear behaviour of perforated plates', KTH university.
  • Schedlinski, C.'Pitfalls in shaker vibration tests on lightweight structures', ICS Engineering GmbH.
  • Taylor, C., Blough, J., DeClerck, J., VanKarsen, C., Labyak, D., and Joshua, R., 'Dynamic fixture development for a structure with two independent attachment points', Michigan Technological Universit.
  • Tcherniak, D.'Application of virtual sensing to enhance fatigue testing of a 77.4 m wind turbine blade', Hottinger Bruel and Kjaer.
  • Tincani, S., Delvecchio, S., and Barbieri, M., 'Assessment of a substructuring model and dynamic characterization of anti-vibrating mounts', Robert Bosch GmbH.
  • Tiseo, B., Fauci, R., Pisano, F. M., Fragiacomo, M., Rufolo, G. C., De Caprio, F., Scigliano, R., Gardi, R., De Stefano Fumo, M., Concilio, A., Quaranta, V., and Bruno, G., 'Space rider: thermal protection system and control surfaces dynamic qualification test', CIRA Centro Italiano Ricerche Aerospaziali.
  • Torres, J., and Buen, A., 'Vibration from treadmills: how is it transmitted and how can it be reduced?', Brekke Strand Akustikk.
  • Zeng, R., Deckers, E., Glorieux, C., Urbán, D., and Chmielewski, B., 'Locally resonant metamaterial wall targeting tonal problems arising from heat pumps in residential buildings', 1 KU Leuven, 2 STU Bratislava, 3 KFB Acoustics sp. z o. o..
  • Zucchini, A., Hülsmann, A., and Naets, F., 'On the multi-domain transmissibility evaluation of dynamic structures with parametrised reduced order models through frequency based substructuring', BMW.

Experimental and hybrid methods for dynamic identification and testing

  • Abuhemeida, N., Cronfalt, F., Ouisse, M., Chevallier, G., Vaillant, D., and Topenot, M., 'Examining sliding in rotor assemblies: an experimental study', Femto ST / Alstom.
  • Acs, D., Gazdagh, Z. G., Fukker, B., and Vehovszky, B., 'Control of transfer function distortion during rpm-sweep testing of e-drive systems', Robert Bosch Kft.
  • Aime, M., Banvillet, A., Khalij, L., Pagnacco, E., Chatelet, E., and Dufour, R., 'Multiaxial test-tailored vibration specifications: process overview and experimental results', French Alternative Energies and Atomic Energy Commission (CEA).
  • Ali, M. J., and Saeed, Z., 'Optimal expansion of interface degrees of freedom using system equivalent model mixing', National University of Sciences and Technology (NUST).
  • Amador, S. D. R.'On the performance assessment of a new poly-reference frequency-domain identification technique', Technical University of Denmark (DTU).
  • Ambrosio, D. R., Camargo, E. A., de Sousa, V. C., Zúñiga, D. F. C., Sartorato, M., Costa, N., and Oliveira, É. L., 'Modal characterization of a helicopter stabilizer from flight test campaign with externally mounted accessory', São Paulo State University.
  • Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Ialonardi, M.'Evaluation of the configuration-dependent dynamics of a cartesian 3d printer using substructing techniques', Univerità degli Studi dell'Aquila.
  • Araújo, R., Garcia de Miguel, A., Forrier, B., Musella, U., Di Lorenzo, E., and Naets, F., 'Prediction of test responses in multi-axis shaker testing using an experimental-based dynamic substructuring approach', Siemens Industry Software NV.
  • Balmes, E., Vermot des Roches, G., Martin, G., and Nacivet, S., 'Hybrid fem/test twin building methods, an electric engine case history', ENSAM / SDTools.
  • Behling, M., Thomason, B., Allen, M., Mayes, R., de Lima, W., and Hower, J., 'Understanding fixture design in immats through fem simulations', Brigham Young University.
  • Bianciardi, F., Forrier, B., Elkafafy, M., and Janssens, K., 'Real-time virtual prototype assembly: evaluation of potential methodologies', Siemens Industry Software NV.
  • Bibin, S., Gupta, A., and Kartik, V., 'Reflection of surface waves from boundaries of viscoelastic phantom subjected to a point load excitation at resonance', Indian Institute of Technology Bombay.
  • Boscia, M., Sbarra, R. G., Coppotelli, G., and Piergentili, F., 'Analysis of the experimental/numerical properties of cubesat-class satellites for the simplification of the launch clearance process', Sapienza University of Rome.
  • Bottalico, F., and Sabato, A.'Assessment of three-dimensional displacements via a novel natural-pattern tracking algorithm', University of Massachusetts Lowell.
  • Brøns, M., and Trainotti, F., 'A framework for correcting measurement position and directions to improve experimental frequency-based substructuring and hybrid models', Technical University of Denmark.
  • Brunetti, J., D'Ambrogio, W., Di Manno, M., Fregolent, A., and Ialonardi, M., 'Dual substructure decoupling for joint identification with unmeasurable interface: a comparative study', Università degli studi di Roma La Sapienza.
  • Buchbach, R., Sinske, J., Govers, Y., and Böswald, M., 'Database-supported correlation of modal data - the dlr correlation tool', German Aerospace Center.
  • Cai, Z., Henriquez, V. C., Islam, A., and Lucklum, F., 'Study of the effect of load on the vibro-acoustic behavior of kelvin-cell foam', Technical University of Denmark.
  • Camargo, E. A., Ambrosio, D. R., de Sousa, V. C., Zúñiga, D. F. C., Sartorato, M., Costa, N., and Oliveira, É. L., 'Effect of rotational speed on the modal parameters of a helicopter blade based on operational modal analysis approach', São Paulo State University.
  • Carter, S. P.'Using multi-shaker force control methods in modal analysis', Sandia National Laboratories.
  • Case, J. A., Barnard, A., and Taggart, A., 'Non-contact measurement of haptic systems', Penn State.
  • Chaabi, M., Lampropoulos, A., Tsioulou, O., and Cacciola, P., 'Investigating the combined effects of temperature and humidity on the dynamic properties of concrete beams', University of Brighton.
  • Cooper, J.'Prediction of limit cycle oscillations from subcritical aeroelastic test data', University of Bristol.
  • Cosco, F., Mastrodicasa, D., Mundo, D., and Di Lorenzo, E., 'Video motion and modal magnification: towards a new paradigm for oma', University of Calabria.
  • Costa Faria, M. A., and Varoto, P. S., 'On the dynamics of a piezoelastic metastucture considering nonlinear effects', University of Sao Paulo.
  • Dal Borgo, M., Musella, U., Thielemans, L., Vettori, S., G. de Miguel, A., Pastorino, R., Di Lorenzo, E., and Peeters, B., 'Real-time virtual shaker testing using an executable digital twin', Siemens Digital Industries Software.
  • De Gregoriis, D., Capurso, F., and Atak, O., 'Structural model parameter identification: leveraging augmented kalman filtering and parametric reduced order models within an optimization scheme', Siemens Industry Software NV.
  • Di Manno, M., Trainotti, F., Ialonardi, M., Rixen, D. J., and Fregolent, A., 'A combined vpt and svt approach for decoupling in the presence of inaccessible and deformable interfaces', La Sapienza.
  • Els, D. N. J., and Venter, M. P., 'Investigation of large, air-cooled condenser drivetrain torque oscillations during startup', Stellenbosch University.
  • Erdelyi, J. A., Gazdagh, Z. G., Bartus, A., and Fukker, B., 'Rattling detection of electric components based on the acceleration surface method', Robert Bosch Kft.
  • Garcia de Miguel, A., Araujo, R., Musella, U., dal Borgo, M., Forrier, B., di Lorenzo, E., and Cornelis, B., 'Multi-axis shock and vibration control testing of automotive battery packs: challenges of an innovative testing practice', Siemens Industry Software NV.
  • Gazdagh, Z. G., Fukker, B., and Vehovszky, B., 'Unlocking the insights of dynamics through experimentation of an electric drive', Robert Bosch Kft.
  • Gebel, J., Daems, P.-J., Nejad, A. R., and Helsen, J., 'Comparison of modal behaviour in wind turbines based on main bearing measurements', NTNU.
  • Goris, M., Deckers, E., and Naets, F., 'Co-simulation approach integrating multibody and discrete element modeling for robomould process analysis', KU Leuven.
  • Gupta, T., and Bhattacharya, B., 'Dynamic study of bandgap in hierarchical metastructure', Indian Institute of Technology Kanpur.
  • Hüttich, P., and Krause, D., 'Holistic approach to vibration characterisation of large structural components in thermal environment', TUHH.
  • Iaffaldano, D., Guida, R., and Carassale, L., 'Estimation of synchronous response of time-variant systems by rotated wavelet probing', Università degli Studi di Genova.
  • Iglesias, A., Franco, O., Beudaert, X., Sanz-Calle, M., and Munoa, J., 'Analysis of variability in machine tool dynamics through enhanced smfe method', Ideko S.Coop..
  • Kamper, M., and Naets, F., 'Geometric parameter estimation of thin-walled structures using finite element model updating, shape optimisation and frequency response functions', KU Leuven.
  • Klaassen, S. W. B., and Boelens, J., 'The effect of noise & uncertainty on the in-situ identification of joint dynamics', VIBES technology.
  • Korbar, J., Ocepek, D., Čepon, G., and Boltežar, M., 'Training artificial neural networks using substructuring techniques: application to joint identification', University of Ljubljana, Faculty of Mechanical Engineering.
  • Kreutz, M., Trainotti, F., and Rixen, D. J., 'On the experimental linear identification of a multiple-joint bolted connection using frequency-based substructuring', Technical University of Munich.
  • Lim, S., Suglob, A., and Woellner, U., 'Sensor calibration procedure in high frequency range using laser doppler vibrometer', Zeiss SMT.
  • Machacek, M., Hračov, S., Vavřík, D., and Rada, V., 'Comparison of fundamental natural modes of cantilevered beam obtained by x-ray computed tomography and laser doppler velocimetry', The Institute of Theoretical and Applied Mechanics.
  • Maressa, A.'Model-based approach to enhance cvt pushbelt testing and product performance', Bosch Transmission Technology.
  • Marion, M., Lossouarn, B., Rouleau, L., Voisin, A., Leblond, C., and Deü, J.-F., 'Modal analysis of metallic structures filled with elastomer and inverse identification of material parameters', Conservatoire National des Arts et Métiers.
  • Martini, V. M., Okabe, E. P., and Cavalca, K. L., 'Extraction of the rotor dynamic behavior on a flexible support structure by dynamic substructuring', University of Campinas.
  • Occhipinti, S., Cesaretti, A., Neri, P., Firrone, C. M., and Botto, D., 'Analysis of nonlinear vibrations of a blade with dovetail attachment using low-speed dic and down-sampling technique', Politecnico di Torino.
  • Ogbodo, C. O., Rogers, T. J., Dal Borgo, M., and Wagg, D. J., 'Mode indicator guided sequential modal analysis', University of Sheffield.
  • Pacini, B. R., Kuether, R. J., and Fowler, D., 'Comparative study of nonlinear modal modeling identification techniques from force appropriation experiments', Sandia National Laboratories.
  • Pandiya, N.'Modal sub-structuring application to the round robin frame structure', Robert Bosch GmbH.
  • Peshave, A. M., Pierron, F., and Lava, P., 'Damage detection in 3d-printed metal alloys by characterization of modal behavior', MatchID NV.
  • Pierro, E., Grillo, D., and Carbone, G., 'The influence of a static axial preload on the vibrational behaviour of a viscoelastic beam: an experimental assessment', Politecnico di Bari.
  • Poleg, Y., Bucher, I., and Minikes, A., 'Using vibrational methods to track and predict critical buckling loads in thin-walled pressure vessels', Technion.
  • Proner, E., and Mucchi, E., 'A novel mimo random control strategy for efficient response replication at the component level', University of Ferrara.
  • Reymert, S., and Wiig Petersen, Ø., 'Application of an augmented kalman filter to the inverse identification of aerodynamic loads on a road vehicle', Norwegian University of Science and Technology.
  • Sbarra, R. G., Del Priore, E., Coppotelli, G., and Lampani, L., 'On the use of fiber optic sensors and operational modal analysis for structural health monitoring in aerospace structures', Sapienza University of Rome.
  • Schultz, R., and Carter, S., 'Possible advantages to using a force-controlled mimo test method for free-flight environments', Sandia National Laboratories.
  • Shiri, B., Esmaeili, M., and Seyedkazemi, M., 'Experimentally and numerically detection of longitudinal crack in concrete sleeper by modal identification and model updating method', Iran University of Science and Technology.
  • Si, Y., Zhu, Y., and Cheng, L., 'A comparative study on data-driven approaches for structural modal parameter identification of building structures', University of Groningen.
  • Soine, D. E.'Resonant plate shock test response with isolated damping bars', Sandia National Laboratories.
  • Soresini, F., Barri, D., Gobbi, M., Manzoni, S., and Ballo, F. M., 'Modal characterization of a pmsm using different experimental techniques', Politecnico di Milano.
  • Syamlan, A., Denis, K., Vander Poorten, E., and Tjahjowidodo, T., 'Cutting torque model for patient - specific pedicle screw surgical simulators', KU Leuven.
  • Taghipour, J., Ebrahimzade, N., Haddad Khodaparast, H., and Friswell, M. I., 'Enhancing model selection for a nonlinear system: a physics-based machine learning approach with afthb and experimental validation', Dyson Institute of Engineering and Technology.
  • Taghipour, J., and H. Biroun, M., 'Identification of droplet impact force on superhydrophobic flexible beams', Dyson Institute of Engineering and Technology.
  • Tavares, A., Di Lorenzo, E., Cornelis, B., Manzato, S., Peeters, B., Desmet, W., and Gryllias, K., 'An industrial benchmark study of automated modal analysis using density-based clustering techniques', Siemens Digital Industries Software.
  • Terzioglu, F., and Rongong, J. A., 'A simple predictive method for evaluating damping from thin viscoelastic layers in structures', The University of Sheffield.
  • Tomac, I., Gorjup, D., and Slavič, J., 'Pixel based experimental modal analysis', University of Split.
  • Trainotti, F., Zobel, O. M., and Rixen, D. J., 'A comparative analysis of frequency- and impulse-based substructuring for experimental shock response predictions', Technical University of Munich.
  • Tresser, S., Dadush Cohen, Y., and Bucher, I., 'Identification of mass and inertia properties by multi-axis vibration testing', Technion.
  • Varga, T. F., Gazdagh, Z. G., Szabo, L. L., Bubreg, M., and Fukker, B., 'Experimental modal analysis based tpa method of wiper system linkage vibration amplification', Robert Bosch Kft.
  • Vettori, S., Mastrodicasa, D., Sosa Chavez, A., Laurini, A., and Di Lorenzo, E., 'Distributed load and full-field response reconstruction during wind tunnel testing of an aluminum wing', Siemens Digital Industries Software.
  • Zaletelj, K., Šonc, J., Slavič, J., and Boltežar, M., 'Thermoelasticity-based strain experimental modal analysis', Faculty of Mechanical Engineering.
  • Zobel, O. M., Trainotti, F., and Rixen, D. J., 'Improving experimental impulse-based substructuring through interface weakening', Chair of Applied Mechanics, TUM School of Engineering and Design, Technical University of Munich.

Inverse methods for dynamic material or component characterization

  • Brion, T., Li, X., Fossat, P., Ichchou, M., Bareille, O., and Zine, A.-M., 'Algebraic k-space identification 2d technique for the automatic extraction of complex k-space of 2d structures in presence of uncertainty', Ecole Centrale de Lyon, CNRS, ENTPE, LTDS, UMR5513, 69130 Ecully, France.
  • Bronkhorst, A. J., Moretti, D., Marchelli, E., Maes, K., and Lombaert, G., 'Identification of the modal and structural properties of a high-rise scale model', TNO.
  • Colombo, G., Mao, H., Palma, G., Rumpler, R., Göransson, P., and Iemma, U., 'From an acoustic metacontinuum to a kelvin-cell based lattice through a cost-effective inverse design approach', Roma Tre University.
  • del Fresno Zarza, J., Miguel Zapata Tamayo, L., and Naets, F., 'A comparative analysis of inverse source load identification methods for non-parametric models in tpa', KU Leuven.
  • Feng, N., Hahn, E., and Yu, M., 'On improving the identification of lumped parameter systems with symmetric mass, damping and stiffness matrices', The University of New South Wales.
  • Gomez, T. S., Jun, D., Cuenca, J., Sebaa, N., De Ryck, L., Armstrong, R., Piana, E., and Glorieux, C., 'Extraction of tortuosity and transport parameters of porous materials from ultrasonic transmission measurements: a sensitivity study', KU Leuven.
  • Leanza, A., De Carolis, S., Soria, L., and Carbone, G., 'Enhancing road roughness identification and system observability through measurement strategies in vehicle dynamics', Politecnico di Bari.
  • Li, X., Mao, H., Ichchou, M., Rumpler, R., and Göransson, P., 'Determination of the equivalent mechanical parameters of honeycomb sandwich structures under the algebraic identification framework', KTH Royal Institute of Technology.
  • Wang, T., Bi, S., and Mottershead, J., 'The role of the summary network in data-driven stochastic model updating based on the conditional invertible neural network (cinn)', University of Strathclyde.
  • Wu, P., Magnevall, M., Liljerehn, A., and Östling, D., 'Cutting force estimation in metal cutting tools: a study on a sensor-equipped cantilever beam', AB Sandvik Coromant.

NVH control solutions

  • Alujević, N., Arandia-Krešić, S., Mikšik, N., and Kara, M., 'Active metamaterial cell for nonreciprocal sound transmission', Faculty of mechanical engineering and naval architecture.
  • Artiano, A., Pizzolante, F., Di Marcoberardino, S., Meleti, S., Tarabra, M., Battarra, M., and Mucchi, E., 'Dynamic modeling for enhanced acoustic comfort in agricultural machinery: nvh digital twin for tractor pump drive', Università degli studi di Ferrara.
  • Austin, B., and Cheer, J., 'Active control of a tuned vibration absorber for use in metamaterial applications', Institute of Sound and Vibration Research.
  • Ballestero, E., Meng, Y., Romero-García, V., Tournat, V., and Groby, J.-P.'Optimal bi-state acoustic metamaterial for broadband sound absorption and diffusion: a real-estate dilemma', LAUM, UMR 6613 CNRS.
  • Beli, D., and De Marqui Jr., C., 'Topological wave states in electromechanical metamaterials', Eindhoven University of Technology.
  • Cheer, J., Tan, J., and Singleton, L., 'Integration of active control with a compound acoustic black hole', University of Southampton.
  • Chojnacka, K., Kras, A., and Kamisiński, T., 'Sound transmission loss dip compensation using multi-resonant vibroacoustic metamaterial designed for injection moulding', AGH University of Krakow.
  • Cool, V., Claeys, C., Denayer, H., Naets, F., and Deckers, E., 'Experimental validation technique for near-2d structures towards the sound transmission loss', KU Leuven, LMSD.
  • Ellis, J., Balatti, D., Haddad Khodaparast, H., Jiffri, S., and Friswell, M., 'Reduction of root loads due to gusts via active hinged wing tip control', Swansea University.
  • Giannini, D., and Reynders, E. P. B., 'Design and validation of multi-modal metamaterials for broadband sound insulation improvements in thin orthotropic panels', KU Leuven.
  • Gungl, S., Horváth, K., and Kimpián, T. A., 'Applications of phase-based motion magnification in vibration analysis of steering systems', thyssenkrupp Components Technology Hungary Ltd..
  • Herrera-Leon, N., Godinho, L., Amado-Mendes, P., and Redondo, J., '3d simulation of porous concrete sonic crystals for noise barrier applications', Universidade de Coimbra.
  • Janssen, S., Schimidt, C. S., de Oliveira, L. P. R., De Marqui Junior, C., Claeys, C., and Deckers, E., 'Adaptive elastic locally resonant metamaterials with piezoelectric elements', KU Leuven.
  • Keys, A., and Cheer, J., 'Optimisation of a modified acoustic black hole profile for the reduction of dynamic stress', University of Southampton.
  • Kleine-Wächter, L., Rumpler, R., Mao, H., Göransson, P., and Müller, G., 'Numerical and experimental investigations of wave propagation in kelvin cell-based periodic lattice architectures', Technical University of Munich.
  • Kokott, A., Monner, H. P., and Prade, M., 'Numerical assessment of active structural intensity control in simply curved panels', German Aerospace Center.
  • Leung, K., and Langfeldt, F., 'A numerical study of a vibro -acoustic metamaterial with an embedded helmholtz resonator', University of Southampton.
  • Lopes, K. W., and de Oliveira, L. P. R., 'Vibration attenuation with shape memory alloy-embedded resonators', São Carlos School of Engineering, University of São Paulo.
  • Lundberg, E., Mao, H., Gaborit, M., Semeniuk, B., Rumpler, R., and Goransson, P., 'Tuning low-frequency sound absorption in anisotropic multilayered poroelastic media using analytical microstructure modelling', KTH Royal Institute of technology.
  • Mardini, L., Deckers, E., Claeys, C., and Van Damme, B., 'Improved vibration isolation of 1d chiral phononic crystals with viscoelastic inserts', EMPA.
  • Niedzielczyk, M., Galland, M.-A., and Zieliński, T. G., 'An acoustic material with tortuous slits filled with fibres', Institute of Fundamental Technological Research Polish Academy of Sciences.
  • Nikolaou, C., Cheer, J., and Langfeldt, F., 'An investigation into the combination of passive acoustic treatments and active structural acoustic control', University of Southampton.
  • Opiela, K. C., Dauchez, N., Boutin, T., Bécot, F.-X., Chevillotte, F., Venegas, R., and Zieliński, T. G., 'Comparison of double-porosity sound absorbers made of sintered or glued powder grains', Institute of Fundamental Technological Research, Polish Academy of Sciences.
  • Pike, X., and Cheer, J., 'Comparison of neural network architectures for feedforward active control of nonlinear systems', University of Southampton.
  • Richiedei, D., Tamellin, I., and Trevisani, A., 'The virtual tuned mass damper for adaptive vibration absorption on a flexible joint robotic arm', University of Padova.
  • Roderigues, G. K., and de Oliveira, L. P. R.'A multi-mode, multiphysics smart metamaterial for nvh control', University of Sao Paulo.
  • Rodriguez, J., Carvalho, A., and Chesné, S., 'On a new methodology for adaptive sliding mode control with self-tuning threshold: application to active vibration control', INSA Lyon.
  • Santo, D. R., Deckers, E., Claeys, C., Boukadia, R. F., and de Oliveira, L. R. P., 'Improving the low-frequency vibration performance of metamaterials with high-static-low-dynamic stiffness local resonators', University of São Paulo.
  • Schimidt, C. S., Deckers, E., Claeys, C., Janssen, S., de Oliveira, L. P. R., and De Marqui Junior, C., 'Sound directivity control by tailoring piezoelectric metamaterial vibration modes', University of Sao Paulo (USP).
  • Shaik Mohammad, A. B., M R, V., and Hedge, M., 'Nvh challenges in electric cars by architecture design changes', Tata Consultancy Services (TCS).
  • Velásquez, C. A. R., and Trindade, M. A.'Passive vibration control of sandwich metastructures using viscoelastic local resonators', University of São Paulo, São Carlos School of Engineering.
  • Yoshimura, T., and Hong, J., 'Baseline sensitivity analysis for vibration reduction in mid-frequency range', Tokyo Metropolitan University.
  • Zhang, R., Zhang, L., and Xia, Y., 'Experimental investigation of a tuned mass inerter system (tmis)', Tongji University.

Non-linear dynamics

  • Abundis-Fong, H. F., Trujillo-Franco, L. G., Gutierrez-Carmona, I., and Dzul-Lopez, A. E., 'Vibration control of a mechanical system using a passive/semiactive flexible inverted pendulum vibration absorber', Tecnológico Nacional de México/I.T. Pachuca.
  • AlQahtani, N. A., Rogers, T. J., and Sims, N. D., 'Gp-narx for active control of nonlinear flexible structures', The University of Sheffield.
  • Amaral, A. C. G., De Roeck, W., and Silveira, M., 'Aeroelastic simulation of the energy harvesting potential of an airfoil in flutter condition using a piezoelectric nonlinear energy sink', UNESP.
  • Anastasio, D., Marchesiello, S., and Kerschen, G., 'Estimation of the periodic solutions of geometrically nonlinear structures by broadband excitation', Politecnico di Torino.
  • Antonelli, N., Rossi, R., Zorrilla, R., Gorgi, A., Scovazzi, G., Aristio, R., and Wüchner, R., 'The shifted boundary method (sbm) in isogeometric analysis (iga)', CIMNE.
  • Aristio, R., Alkhlaifat, M., Camarotti, J. I., and Wüchner, R., 'Cad-integrated isogeometric analysis of trimmed multipatch shells for transient non-linear problems', Technische Universität Braunschweig.
  • Bauer, B., Papangelo, A., and Habib, G., 'A reduced order approach for race car porpoising', Budapest University of Technology and Economics.
  • Bee, S. C., Bull, L., Worden, K., and Dervilis, N., 'Regularising narx models by mtl', University of Sheffield.
  • Black, J., Clawson, S., Allen, M., Crane, N., and Nelson, T., 'Nonlinear dynamic properties of powders in additively manufactured steel beams', Brigham Young University.
  • Bucher, I.'Exploiting fluid nonlinearity for sound control and sensing with parametric speakers', Technion, Israel Institute of Technonology.
  • Bull, L., Dardeno, T., Dervilis, N., Alex Glyn-Davies, A., Bunker, J., Girolami, M., and Worden, K., 'Normalising kalman filters as nonlinear normal modes', University of Sheffield.
  • Chondrogiannis, K. A., Arcieri, G., Dertimanis, V., and Chatzi, E., 'Gaussian process based optimization strategies for nonlinear vibration control device', ETH Zürich.
  • Cuccovillo, F., Berruti, T. M., and Botto, D., 'Exploring feasibility of neural networks for dynamic system with friction damping', Politecnico di Torino.
  • El Yousfi, B., Soualhi, A., Lourari, A., and Bouzar Essaidi, A., 'Gear mesh stiffness calculation considering teeth deformation under non-uniform crack condition', Ecole Militaire Polytechnique.
  • Farokhi, H., Jamia, N., Jalali, H., Taghipour, J., Khodaparast, H. H., and Friswell, M. I., 'A new distributed joint model for non-ideal supports in curved panels under large-amplitude vibrations', Northumbria University.
  • Floren, M., Peri, L., De Maeyer, J., De Munter, W., Vandepitte, D., and Noël, J.-P., 'Data-driven nonlinear state-space identification of the cubespec fine steering mirror', KU Leuven.
  • Gabos, Z., and Dombovari, Z., 'A resection algorithm for control-free shaker testing of weakly coupled smooth nonlinear systems', Budapest University of Technology and Economics.
  • Goyder, H.'Investigation of perfect curve fitting of spectra from linear and non-linear structures using barycentric interpolation', Cranfield University.
  • Graczykowski, C., and Żurawski, M.'The concept and numerical study of adaptive pneumatic impact damper for mitigation of free and harmonically excited vibrations', Warsaw University of Technology.
  • Gürses, K., and Ardıç, H., 'Random vibration testing and modelling the random vibration response of a wire rope isolator system', Roketsan Inc..
  • He, Y., and Wei, X., 'Evaluation of the effect of geometric nonlinearity of an ultra-long cable on its structural dynamics', Central South University.
  • Jalali, H., and Farokhi, H., 'Parametrically excited restoring force model for hysteresis behaviour of frictional contact interfaces', Northumbria University.
  • Jamia, N., Pandey, P., Farokhi, H., Friswell, M. I., Haddad Khodaparast, H., and Jalali, H., 'Experimental analysis of dynamic characteristics in bolted joint interfaces of thin plates', Swansea university.
  • Khan, M., Pacini, B. R., and Kuether, R. J., 'Harmonic balance based methodology for reduced order modeling to predict response of nonlinear structures', Sandia National Laboratories.
  • Leitch, H., Yuan, J., and Stodieck, O., 'Nonlinear aeroelastic analysis of continuous tow sheared composite wings', University of Strathclyde.
  • Lo, Y.-C., and Chan, Y.-J., 'Testing and modelling of nonlinear dynamic behavior and of linear guideways', National Chung Hsing University.
  • Marhenke, N., and Panning-von Scheidt, L., 'Investigations of the nonlinear modal interactions due to multi-resonances', Institute of Dynamics and Vibration Research.
  • Mashayekhi, F., and Alcorta, R., 'Damped nonlinear modes and forced response analysis of a system with hybrid nonlinearity', Politecnico di Torino.
  • Massingham, J., Nielsen, O., and Butlin, T., 'Cnns applied to nonlinear dynamical systems: a wiener series perspective', Cambridge University.
  • Mikkelsen, J. K., Avendaño-Valencia, L. D., and Schlette, C., 'Optimal experimental design for modeling the dynamic response of a pseudo-static moving load on a beam', University of Southern Denmark.
  • Moldenhauer, B. J., Roettgen, D. R., and Linderholt, A., 'System identification of nonlinear attachments for the dynamic substructuring round robin structure', Sandia National Laboratories.
  • Pachocki, L., Bruski, D., Kochanowski, T., Sobczyk, B., Meronk, B., and Miśkiewicz, M., 'Numerical and experimental testing of the support structure for testing wind turbine blades', Gdansk University of Technology.
  • Paixão, J., Platzer, A., Rodriguez, J., Blal, N., and Baguet, S., 'Data-driven nonlinear restoring force identification for active vibration control', INSA Lyon.
  • Pandey, P., Barman, S., Khodaparast, H. H., Mukhopadhyay, T., Dey, S., Madinei, H., and Friswell, M. I., 'Optimizing mass-in-mass metamaterials for enhanced energy harvesting: a machine learning approach', Swansea University.
  • Porter, J. H., and Brake, M. R.'Superharmonic resonances and model validation with a jointed structure', Rice University.
  • Pourkiaee, M.'A nonlinear interface reduction technique for jointed structures with localized friction interfaces', Politecnico di Torino.
  • Preston, O. H. L., Rogers, T., and Worden, K., 'Using higher order frequency response functions from narx methods to support activation function choices', The University of Sheffield.
  • Raze, G., Abeloos, G., and Kerschen, G.'Recent advances in control-based nonlinear vibration testing', University of Liege.
  • Raze, G., and Zhou, T., 'Numerical models and stability analysis of control-based methods for nonlinear vibration testing', University of Liège.
  • Saletti, G., Battiato, G., and Zucca, S., 'Coupled harmonic balance based approach for the non-linear dynamics of spur gear systems', Politecnico di Torino.
  • Seifert, A., and Hetzler, H., 'Numerical detection of frequency locking of quasi-periodic solutions', University of Kassel.
  • Shaw, A. D., Nar, E., and Adhikari, S., 'Nonlinear behaviours of a class of inertial amplifiers', Swansea University.
  • Soleimani, H., and Aage, N., 'Analyzing the nonlinear vibration in hearing aids frame induced by contact interactions', Technical University of Denmark.
  • Tatsis, K., and Agathos, K., 'A deep-learning approach for the identification of reduced-order nonlinear dynamics', Swiss Data Science Center (SDSC).
  • Thaller, T., Klanner, M., and Ellermann, K., 'Numerical method for transient analysis of beams with nonlinear boundary conditions using a trefftz-based approach', Graz University of Technology.
  • Westmeier, T., Kreuter, D., Bucher, S., and Hetzler, H., 'Hybrid autoregressive neural networks to predict forced vibrations', Robert Bosch GmbH.
  • Worden, K.'Revisiting the link between algebraic geometry and nonlinear dynamics', University of Sheffield.
  • Yosifov, S., and Bucher, I., 'Controlling spatial and rotational movement of small, acoustically levitated particles by phasing and rotating piezoelectric transducer arrays', Technion – Israel Institute of Technology.

Novel NVH applications in machines and vehicles

  • Chen, X., He, Y., Deng, J., Xu, J., Wu, Z., Wu, J., Yan, W., and Wu, Y.'The application of locally resonant acoustic metamaterials in automobile low frequency noise reduction', Southwest Jiaotong University.
  • Fabbri, D., Bruzzone, F., Rosso, C., and Arina, R., 'Methods and applications of computational fluid-structure interaction for nvh problems - a review', Politecnico di Torino.
  • Gergacz, B., Balogh, C. L., and Kimpian, T. A., 'Importance of data quality: an experimental study of passive-side noise in ctpa measurements', thyssenkrupp Components Technology Hungary Kft..
  • Hansen, K., and Sorokin, S. V., 'Asymptotic analysis of acoustic black holes in cylindrical shells', Grundfos A/S.
  • Kimpián, T. A., and Augusztinovicz, F., 'Experimental validation of the linear transducer model of permanent magnet synchronous motors for torsional vibration analysis applications', thyssenkrupp Components Technology Hungary Ltd..
  • Knechten, T.'On the frf measurements of low weight, low stiffness structures', sisw nv.
  • Ocepek, D., Trainotti, F., Čepon, G., Rixen, D., and Boltežar, M., 'Exploring and applying sparse regression in admittance-based tpa methods', University of Ljubljana.
  • Rajan, S., and Palanivelu, S., 'Engineering analysis cum assessment of noise and vibration of operator-tractor-field system using operational transfer path analysis', Vellore Institute of Technology, Vellore.
  • Rapisarda, A., Sangiuliano, L., D'Alessandro, L., and Pugno, N. M., 'Numerical aero-acoustic performance investigation of an axial fan with a bio-inspired structures design', University of Trento.
  • Salamone, N., Bianciardi, F., Janssens, K., Van Ophem, S., and Desmet, W., 'Real-time capable models for fast nvh and sound quality optimization of electric vehicles', Siemens Digital Industries Software NV.
  • Wagner, P., Langer, P., Maeder, M., and Marburg, S., 'Quantifying and validating vehicle seat nonlinearities using finite element modelling and experiments', BMW Group.
  • Xia, Y., and Zhang, R., 'Concept design and dynamic analysis of an inerter-based landing gear system for lunar lander application', Swansea University.

Novel applications in rotating system dynamics

  • Ahani, M., Remond, D., and Bourdon, A., 'Generic model for reconstruction of nonlinear cyclic excitations in gearbox and the improvement of the operational modal analysis', INSA-Lyon.
  • Baekeland, M., Gryllias, K., and Vandepitte, D., 'Experimental characterisation of radial passive magnetic bearings for compact low-vibration flywheel systems', KU Leuven.
  • Caselli, L., Gioviti, P., Rizzitelli, M., Rivola, A., and Troncossi, M., 'On the numerical modelling of a rotor system to support the analysis of experimental vibration signals for the condition monitoring of a cn lathe integrated with an automatic bar feeder', University of Bologna.
  • Couet, M., Deü, J.-F., Rouleau, L., and Thouverez, F., 'Topology optimization of constrained layer damping on fan blades', Safran Aircraft Engines / CNAM Paris / Ecole Centrale Lyon.
  • Cristofori, G., and Mucchi, E., 'Rattle detection in gearing systems by noise and vibration measurements', University of Ferrara.
  • Hay, G., Giraud-Audine, C., Mahé, H., and Thomas, O., 'Electromagnetic shunt damping for torsional vibration reduction in rotating structures: theory, optimization, and experimental insights', Arts et Métiers.
  • Lanting, J., Cuypers, C., Baekeland, M., Delabie, T., and Vandepitte, D., 'Experimental verification of linear model assumptions for low-power and -volume active magnetic bearings', KU Leuven.
  • Mantas, P., Mauricio, A. R., Goossens, S. F., Ojo, D. S., Berghmans, F., and Gryllias, K., 'Rolling element bearing diagnostics using fiber bragg grating sensors', KU Leuven.
  • Mencik, J.-M., Nikiema, P., and Mbaye, M., 'On the dynamic behavior of bladed disks using wave finite element strategies and model reduction techniques', INSA Centre Val de Loire.
  • Occhipinti, S., Mastrodicasa, D., Manzato, S., and Di Lorenzo, E., 'Application of digital image correlation in operational modal analysis of rotating structures', Politecnico di Torino.
  • Radoš, R., Alujević, N., Arandia-Krešić, S., and Vladimir, N., 'Exact and an approximate solution for free vibrations of rotating cylindrical shells having both ends clamped', Faculty of mechanical engineering and naval architecture.
  • Razavian, H., and Shooshtari, A.'Numerical and experimental investigation on the effects of crooked shaft washer and housing washer in a single row thrust ball bearing on its vibrational response', Bu-Ali Sina University.
  • Überwimmer, G., Klanner, M., and Ellermann, K., 'Analysis of rotor-bearing systems utilising fractional derivative material damping models', Graz University of Technology.
  • Wachter, R., Werner, U., Herzog, H.-G., and Bauer, C., 'Vibration analysis including active vibration control of a 11kw two-pole induction motor with elastic steel frame foundation based on detailed 3d fe-models and experimental modal analyses', Technische Hochschule GSO.
  • Yorke, R., Garvey, S. D., and Amoozgar, M., 'Managing peak response as a rotor accelerates through a follower critical speed', University of Nottingham.

Simulation and Digital Twin approaches in mechatronic and multibody dynamics

  • Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Marafini, F.'Identification of the electromechanical model of a pneumatic positioner for the dynamic actuation of an oscillating platform', Univerità degli Studi dell'Aquila.
  • Auzanneau, B., Sadoulet-Reboul, E., Foltête, E., Ham-Livet, G., and Cogan, S., 'A methodology to manage the complexity of a nonlinear multibody digital twin in railway applications', Université Franche-Comté.
  • Cangi, G., Angeletti, A., Baldinucci, M., Palmieri, M., and Cianetti, F., 'A python software development for dynamic simulation of mobile elevating work platform', Universita degli studi di perugia.
  • Desenfans, P., Gong, Z., Vanoost, D., Gryllias, K., Boydens, J., and Pissoort, D., 'Modelling mechanical faults in induction motors using magnetic equivalent circuits and lumped-element shaft-bearing dynamics', KU Leuven, Bruges Campus.
  • Dhote, V. K., Dutta, G. K., and E, H., 'Dynamic response studies of a typical naval fighter aircraft structure subjected to simulated arrested landing loads', Aeronautical Development Agency.
  • Fabre, F., Le Carrou, J.-L., and Chomette, B., 'Dynamic substructuring based on the complex udwadia-kalaba formalism', Institut Jean Le Rond d'Alembert.
  • Fleres, D., De Gregoriis, D., Atak, O., and Naets, F., 'Non-intrusive parametric hyper-reduction for nonlinear structural finite elements formulations', Siemens Digital Industries Software.
  • GARCIA, T., CHESNE, S., and REMOND, D., 'Active vibration control of cable-driven parallel robots', INSA Lyon.
  • Gioviti, P., Martini, A., Naets, F., Rivola, A., and Troncossi, M.'An iterative procedure to integrate elastodynamic simulations and virtual commissioning of mechatronic systems: a machine tool case-study', University of Bologna.
  • Jaiswal, S., Katwal, P., and Mikkola, A.'State estimation of a hydraulic tower-press filtration equipment using an indirect kalman filter', Lappeenranta University of Technology.
  • Jensen, A. M. D., Thing, M. L., Gres, S., and Abbiati, G., 'Parameter identification of multibody systems using kalman filters', Aarhus University.
  • Karpik, A., Cosco, F., and Mundo, D., 'Convergence and comprehensive error analysis of higher-order fe formulations in structural dynamics', University of Calabria.
  • Mazzanti, L., Vivet, M., De Gregoriis, D., and Naets, F., 'A kalman-based approach to drivetrain misalignment estimation', KU Leuven.
  • Oyarzabal, A., Gil-Negrete, N., and Alonso, A., 'Data-based knowledge transfer to improve the accuracy of physical models in digital twins', Universidad de Navarra - Tecnun.
  • Richiedei, D., Tamellin, I., and González, F., 'Co-simulation correction in multibody systems through eigenstructure assignment', University of Padova.
  • Shapira, D., and Bucher, I., 'Optimization of the ultrasonic dynamics and kinematics for a micron-scale accurate ultrasonic motor', Technion - Israel Institute of Technology.
  • Shen, X., Devaraja, P., Wagg, D., and Bonney, M., 'Knowledge graphs for digital twins of structural dynamic systems', The Alan Turing Institute.
  • Thielemans, L., Sputh, B. H. C., Pastorino, R., Desmet, W., and Swevers, J., 'Industrial application of residual power method as co-simulation performance indicator for e-motor hybrid-physical-virtual test setup', Siemens Industry Software NV.
  • Vancauwenbergh, L., Vandepitte, D., Moens, D., Naets, F., Claessens, S., Vanneste, G., and Vercruijsse, P. M., 'Analyzing transient cutting behavior of a cutter suction dredger drivetrain: enhancing operational efficiency through co-simulation', KU LEUVEN.
  • Vanpoucke, J., Roelandt, T., and Vandepitte, D., 'Longitudinal stability analysis of an insect-like flapping wing micro aerial vehicle operating at variable forward flight speed', KU Leuven.
  • Werner, D., Offner, G., Lorenz, N., and Schweiger, C., 'Refining gearbox multibody simulation: enhancements for nvh and acoustic analysis', AVL Deutschland GmbH.
  • Willems, T., Zaletelj, K., Vanpaemel, S., Slavič, J., and Naets, F., 'Exploiting vision-based motion measurements for the experimental model identification of flexible multibody mechanisms', Flanders Make@KU Leuven.

Simulation and Digital Twin approaches in vibro-acoustics

  • Adhikari, S., and Jacques, A., 'Mode veering in dynamic systems through inertial coupling', University of Glasgow.
  • Barri, D., Soresini, F., Gobbi, M., Ballo, F. M., Mastinu, G., and Di Gerlando, A., 'Comparison of different electromagnetic forces calculation methods for the analysis of electric motors nvh behaviour', Politecnico di MIlano.
  • Bizzarri, D., Atak, O., Beriot, H., and van Ophem, S., 'Enhancing digital twin development through advanced vibroacoustic modeling techniques', Siemens Industry Software NV/ KU Leuven.
  • Bruzzone, F., and Rosso, C., 'The importance of damping in nonlinear gear meshing simulations', Politecnico di Torino.
  • Chappell, D. J.'A superconvergent convolution quadrature method for time-dependent dynamical energy analysis', Nottingham Trent University.
  • Chocholaty, B., Leiber, C., and Marburg, S., 'Effects of similarity measures and assignment methods on mode pairing for the application of timber plates', Technical University of Munich.
  • Daga, A. P., Viale, L., Agabiti, D., Fasana, A., and Garibaldi, L., 'Dynamic analysis of metamaterials for industrial applications: numerical predictions and experimental results', Politecnico di Torino.
  • Duhamel, D.'Dynamic response of large finite two-dimensional periodic structures', Ecole des Ponts ParisTech.
  • Duster, A., Hughes, T. J. R., Pagonas, A., Radtke, L., Reali, A., Sangalli, G., and Torre, M., 'Immersed iga and mass lumping for explicit dynamics', University of Pavia.
  • Farkas, M., and Erdelyi, J. A., 'Automated comparison of product sounds – a digital twin approach to jury testing', Robert Bosch Kft.
  • Graham, W. R.'Theoretical prediction of belt properties for tyre-vibration modelling', University of Cambridge.
  • Herbst, M.'Comparison of the numerical accuracy of cms and fbs techniques in fem calculations', BETA CAE Systems SA.
  • Hostombe, K., and Sachau, D., 'Vibroacoustic behaviour of layered media for underwater applications', Helmut-Schmidt-University, University of the Federal Armed Forces, Germany.
  • Jovanovic, V., Arnoult, T., Zamponi, R., Glabeke, G., Schram, C., Planquart, P., and Toulorge, T., 'Numerical study on the aeroacoustic impact of slat tracks in a high-lift wing configuration', Cenaero.
  • Le, P., Panagiotopoulos, D., and Deckers, E., 'Model order reduction of isogeometric bem systems via krylov subspace recycling', KU Leuven.
  • Li, M., Liu, C., He, Y., Wang, F., Wu, E., and Zhao, Q., 'Modelling of vibro-acoustics characteristics of ribbed panels using combining method of 2.5d fem and bem', Chengdu Aircraft Industrial (Group) Co., Ltd.
  • Natali, C., Battarra, M., Dalpiaz, G., and Mucchi, E., 'Tribo-dynamics of balanced vane pumps for automotive applications and experimental validation', University of Ferrara.
  • Palmieri, M., Cianetti, F., Slavič, J., and Braccesi, C., 'Fast evaluation of kurtosis and skewness by modal decomposition for fatigue analysis in frequency domain under non-gaussian random loads', University of Perugia.
  • Paroissien, J., Lardeur, P., and Oudjene, M., 'Finite element models for laminated timber structures using solid, solid-beam and solid-shell approaches', Université de Technologie de Compiègne + Université Laval.
  • Santos, V. M. d. S., Sales, T. d. P., and Ouisse, M., 'A modified generalized bloch-mode synthesis for the efficient modeling of periodic structures using the wave-based finite element method', Aeronautics Institute of Technology.
  • Schneider, S., Refik, E., Giese, T., and Graf, B., 'Advanced practical gearbox nvh analyses: an engineering guide', Ulm University of Applied Sciences.
  • Viale, L., Daga, A. P., Fasana, A., and Garibaldi, L., 'Optimization of irregular-shaped resonant plates for pyroshock testing in the aerospace industry', Politecnico di Torino.
  • Wang, H., Van Belle, L., and Naets, F., 'Model-based noise and vibration analysis of electric vehicle e-motor and gearbox', KU Leuven.
  • Zucca, G., Palmieri, M., Braccesi, C., and Cianetti, F., 'On the probability density function of rainflow stress range for sine on random processes', Aeronautical and Space Test Division.
  • Zullo, L., Li, Y., Beriot, H., Berzi, L., and Baldanzini, N., 'Parametric model for emulating absorbing infinite plane in pass-by noise simulations', University of Florence.

Uncertainty in structural and system dynamics

  • Ascia, P., and Duddeck, F., 'Enhancing development flexibility: a grey-box strategy for adapting to unforeseen adverse conditions', Technische Universität München.
  • Aswathy, M., Praveen Krishna, I. R., and Arun, C. O., 'Stochastic meshless methods for free vibration analysis of thin beams, and frames with random material density and young’s modulus', Indian Institute of Technology Delhi.
  • Bonnet-Eymard, D., Persoons, A., Gavallas, P., GR Faes, M., Stefanou, G., and Moens, D., 'Physics-informed neural networks to propagate random field properties of composite materials', KU Leuven.
  • Boukadia, R. F., Pillot, Y., Deckers, E., and Desmet, W., 'Quantifying the impact of variability on locally resonant metamaterial performance through reduced order modeling', KU Leuven.
  • Bouras, A., and Carassale, L., 'Analytic derivatives of finite element matrices with respect to geometry', Università di Genova.
  • Brizard, D., and Jacquelin, É., 'An examination of the morris analysis in the context of global sensitivity analysis of car crashworthiness with a toy car model', Université Gustave Eiffel.
  • Champneys, M. D., and Rogers, T. J., 'An efficient reversible-jump mcmc scheme for model order selection in dynamic systems', University of Sheffield.
  • Cicirello, A.'Machine learning enabled combined parametric and non-parametric uncertainty in vibro-acoustics', University of Cambridge.
  • Colella, G., Lange, V. A., and Duddeck, F., 'A transfer learning framework for crashworthiness analysis', BMW AG.
  • D’Angelo, L., Cirelli, M., Giannini, O., and Valentini, P. P., 'Fuzzy logic assessment of epistemic uncertainties in pseudo-rigid multibody gear models', Unicusano University - Rome.
  • Depaola, M., De Gregoriis, D., Jouan, G., Bornoff, R., Atak, O., Vandevelde, B., and Moens, D., 'Thermal virtual sensing for electronic components and systems: exploring the robustness of kalman filtering', Siemens.
  • Dodt, M. B., Bogaerts, L., Persoons, A., Faes, M. G. R., and Moens, D., 'A multifidelity framework for grey-box modelling of automated welding processes', KU Leuven.
  • Faraci, A., Beaurepaire, P., and Gayton, N., 'Enhancing reliability-based design optimization through adaptive kriging and gardient-free optimization', Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, F-63000 Clermont-Ferrand, France.
  • Gan, I., Fichera, S., Bi, S., and Mottershead, J., 'Experimental results from a stochastic model updating study with controlled uncertainty', University of Liverpool.
  • Giannoukou, K., Marelli, S., and Sudret, B., 'Exploring multi-fidelity noisy data: methods and real-world examples', ETH Zurich.
  • Giro, Y., Le Carrou, J.-L., Vincenti, A., Dartois, S., Navarret, B., and Viala, R., 'Robust optimisation of an acoustic guitar's composite top plate', Sorbonne Université.
  • Hughes, A., Dervilis, N., and Worden, K., 'Cost-informed dimensionality reduction for structural digital twin technologies', The University of Sheffield.
  • Jacquelin, E., Adhikari, S., and Brizard, D., 'Random mode evaluation with polynomial chaos expansion', Université Claude Bernard Lyon 1.
  • Jones, M. R., and Cross, E. J., 'Convolution kernels for gaussian processes', The University of Sheffield.
  • Könecke, T., and Hanss, M.'Beyond precision: the power of possibility theory for quantifying imprecise probabilities', University of Stuttgart.
  • Könecke, T., and Hanss, M., 'Exploring possibilistic potentials in uncertainty quantification for modal analysis techniques', University of Stuttgart.
  • LI, P., Valdebenito, M. A., and Faes, M. G. R., 'Direct updating of the overall failure probability using the weighted sparse grid numerical integration', TU DORTMUND.
  • Lindbichler, L., Klanner, M., and Ellermann, K., 'Determination and uncertainty analysis of optimal control parameters in actively steered wheelsets to reduce wear and rolling contact fatigue in railway systems', Graz University Of Technology.
  • Lu, H., Farrokhabadi, A., Rauf, A., Talemi, R., Gryllias, K., and Chronopoulos, D., 'Uncertainty quantification for damage detection in 3d printed auxetic structures based on ultrasonic guided-wave using deep ensemble probabilistic convolutional neural network', KULEUVEN.
  • M. S. Ribeiro, L. H., Clayes, C., T Fabro, A., Chronopoulos, D., and F. Arruda, J. R., 'Designing phononic crystals robust against mechanical property variability using statistical data from statistical process control', University of Campinas.
  • Maier, S., Bachmann, F., and Feldmann, R., 'Comparison of neural network based surrogate model and subset simulation for reliability analysis of components submitted to vibrational loads', BMW AG.
  • Manque, N. A., Valdebenito, M. A., Moens, D., and Faes, M. G. R., 'A reduced-order model for interval analysis in linear dynamical systems', TU Dortmund University.
  • Misraji, M. A., Valdebenito, M. A., Zhang, X.-Y., and Faes, M. G. R., 'First excursion probability sensitivity by means of domain decomposition method', TU Dortmund University.
  • Mohan Kumar, M. K., and Platz, R., 'Deterministic comparison of the discrepancy between the numerical simulation and experimental test considering passive and active vibration isolation using different analytical and discrete mathematical models', Deggendorf Institute of Technology.
  • Nabarrete, A., Brazalez, J. P., Donadon, M. V., and Santos, P. R. d., 'Probabilistic approach of uncertainties for structural dynamics of pressurized composite cylinders', Aeronautics Institute of Technology.
  • Perrin, G., and Soize, C., 'Reconstruction of random fields concentrated on one-dimensional manifold using irregularly sampled data', Université Gustave Eiffel.
  • Persoons, A., and Moens, D., 'Adaptive kriging based on extreme value indicator distribution for robust design optimization', KU Leuven.
  • Petersen, Ø. W., and Lourens, E.-M., 'Model error effects on input and state estimation in structural dynamic systems', NTNU.
  • Pires, A. V., Moustapha, M., Marelli, S., and Sudret, B., 'New insights on reliability analysis for stochastic simulators using surrogate models', Chair of Risk, Safety and Uncertainty Quantification, ETH Zurich.
  • Pitchforth, D., and Cross, E., 'Towards a framework for prior knowledge inclusion in gaussian processes', The University of Sheffield.
  • Shariatmadar, K., Wang, K., R. Hubbard, C., Hallez, H., and Moens, D., 'An introduction to optimization under uncertainty - a short survey', KU Leuven.
  • Sofi, A., and Genovese, F., 'Combined primary-secondary structures under imprecise seismic excitation', Università Mediterranea di Reggio Calabria.
  • Zhang, J., Feng, Z., Hua, X., and Chen, Z., 'Enhancing damping identification in stay cables: a bayesian approach incorporating the influence of ambient vibration on free vibration response', Hunan University.