ISMA2018 - USD2018 Conference Programme

Download a pdf-version of the programme book here .

Monday 17 September 2018
8:00 - 11:30 Registration - Auditorium Vesalius
9:30 - 11:30 Conference opening session - Auditorium Vesalius
9:30 Introduction to ISMA2018-USD2018

Prof. W. Desmet & Dr. B. Pluymers, ISMA2018 conference chairmen

Prof. D. Moens, USD2018 conference chairman

10:00 Keynote lecture: Shapes & DOF: on the use of modal concepts in the context of parametric non-linear studies

Etienne Balmes, Ecole Nationale Supérieure d’Arts et Métiers - Laboratoire Procédés et Ingénierie en Mécanique et Matériaux (PIMM), France

10:45 Keynote lecture:  Automotive NVH – Methodology for Future Innovative Product Development

Per-Olof Sturesson, Volvo Car Group, Sweden

11:30 - 13:25 Lunch break - Campus Social Sciences (ALMA)
11:50 - 12:50 Science2Society workshop for mobile researchers

More information and registration can be found here

13:00 - 18:00 Exhibition - Campus Social Sciences (ALMA)
13:25 - 18:25 Technical Sessions - Campus Social Sciences

Plenary Poster Session - Campus Social Sciences

19:00 - 22:00 Conference Reception - University Hall (Jubileumzaal). All ISMA2018-USD2018 attendees, exhibitors and guests are invited. The
reception is sponsored by AB InBev and Siemens PLM Software.


Tuesday 18 September 2018
Wednesday 19 September 2018
Monday 17 September
room 1  room 2  room 3  room 4 room 5 room 6 room 7 room 8 Poster Area
Tuesday 18 September
room 1  room 2  room 3  room 4 room 5 room 6 room 7 room 8 Poster Area
Wednesday 19 September
room 1  room 2  room 3  room 4 room 5 room 6 room 7 room 8 Poster Area

Conference programme:

Authors in bold are the submission’s presenting author.

The full papers can be accessed by entering the wifi-login credentials mentioned on your conference badge.

The preliminary proceedings merged in 1 file are available here.

Several poster presenters have prepared a video pitch about their contribution. A link to the video is then added next to the abstract.


Keynote presentations

Keynote-Monday 17 September 2018

10:00 Balmes, E.'Shapes & dof: on the use of modal concepts in the context of parametric non-linear studies', Arts et Métiers Paristech. ( abstractfull paper )
10:45 Sturesson, P.-O.'Automotive nvh – methodology for future innovative product development', Volvo Car Group. ( abstractfull paper )

Active vibration control

AVC1-Monday 17 September 2018

15:55 Pesaresi, E., and Troncossi, M.'Synthesis of vibration signals with prescribed power spectral density and kurtosis value', University of Bologna. ( abstractfull paper )
16:20 De Bono, E., Collet, M., and Karkar, S., 'Analysis of a transport equation as boundary condition in an acoustic transmission line', Ecole Centrale de Lyon. ( abstractfull paper )
16:45 Misol, M., Algermissen, S., and Rose, M.'On the noise reduction of active sidewall aircraft panels using feedforward control with embedded systems', DLR - German Aerospace Center. ( abstractfull paper )
17:10 Raze, G., Lossouarn, B., Paknejad, A., Zhao, G., Deü, J.-F., Collette, C., and Kerschen, G., 'A multimodal nonlinear piezoelectric vibration absorber', University of Liège. ( abstractfull paper )
17:35 Antonelli, D., Nesi, L., Pepe, G., and Carcaterra, A., 'Mechatronic control of the car response based on vfc', Sapienza University of Rome. ( abstractfull paper )
18:00 Pepe, G., Antonelli, D., Nesi, L., and Carcaterra, A., 'Flop: feedback local optimality control of the inverse pendulum oscillations', Sapienza University of Rome. ( abstractfull paper )

AVC2-Tuesday 18 September 2018

10:10 Barnard, A., and Senczyszyn, S., 'Active noise control in pipes and ducts using carbon nanotube thermophones', Michigan Technological University. ( abstractfull paper )
10:35 Tipuric, M., Wagg, D., and Sims, N. D., 'Vibration suppression using the concept of a semi-active magnetorheological inerter device', University of Sheffield. ( abstractfull paper )
11:00 Bartel, T., Atzrodt, H., and Wilczynski, D., 'Active vibration reduction on a quadrocopter', Fraunhofer Institute for Structural Durability and System Reliability. ( abstractfull paper )
11:25 Zhao, G., Paknejad, A., Raze, G., Kerschen, G., and Collette, C., 'H-infinity optimization of positive position feedback control for mitigation of nonlinear vibrations', Université Libre de Bruxelles. ( abstractfull paper )

AVC3-Wednesday 19 September 2018

10:10 Mokrani, B., Palazzo, F., Fichera, S., Adamson, L. J., and Mottershead, J. E., 'Multi-input multi-output aeroelastic control using the receptance method', University of Liverpool. ( abstractfull paper )
10:35 Adamson, L. J., Fichera, S., and Mottershead, J. E., 'Minimisation of the effect of aleatory uncertainties on dynamic systems by active control using the method of receptances', University of Liverpool. ( abstractfull paper )
11:00 House, C., Cheer, J., and Daley, S., 'The effect of active vibration control on the sound field scattered from a flexible structure', University of Southampton. ( abstractfull paper )
11:25 Mikułowski, G., Popławski, B., Wiszowaty, R., Mróz, A., and Jankowski, Ł., 'An investigation on a semi-active damping of forced structural vibrations by means of controllable structural nodes', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )
11:50 Zech, P., Plöger, D. F., Bartel, T., Röglin, T., and Rinderknecht, S., 'Design of an inertial mass actuator for active vibration control of a planetary gearbox using piezoelectric shear actuator', TU Darmstadt. ( abstractfull paper )

Advanced training and research in energy efficient smart structures

ANT1-Tuesday 18 September 2018

15:40 Risaliti, E., Tamarozzi, T., Cornelis, B., and Desmet, W., 'Virtual sensing of wheel center loads on a mcpherson suspension', Siemens PLM Software. ( abstractfull paper )
16:05 Dal Borgo, M., Ghandchi Tehrani, M., and Elliott, S. J., 'Nonlinear feedback control of a stroke limited inertial actuator using a state estimation approach', University of Southampton. ( abstractfull paper )
16:30 Zientek, M., Gardonio, P., and Dal Bo, L., 'Piezoelectric patches with multi-resonant shunts for multiple frequency band vibration control', University of Udine. ( abstractfull paper )
16:55 Camperi, S., Ghandchi Tehrani, M., and Elliott, S. J., 'Experimental decentralised control of vibration on a plate with inertial actuators', University of Southampton, ISVR. ( abstractfull paper )
17:20 Kras, A., and Gardonio, P., 'Experimental tests of a flywheel proof mass actuator for velocity feedback control', University of Udine. ( abstractfull paper )
17:45 Tajdari, F., Berkhoff, A., and de Boer, A., 'Numerical modeling of a flexural displacement-converter mechanism to excite a flat acoustic source driven by piezoelectric stack actuators', University of Twente. ( abstractfull paper )

ANT2-Wednesday 19 September 2018

08:30 Ghandchi Tehrani, M., and Pumhoessel, T., 'Active vibration control of a system subject to random excitation using impulsive parametric damping', University of Southampton. ( abstractfull paper )
08:55 Aboulfotoh, N., and Twiefel, J.'A study on important criteria for the effectiveness of piezoelectric energy harvesters under a constant volume', Leibniz University Hannover. ( abstractfull paper )
09:20 Lapiccirella, G., and Rohlfing, J., 'Stability, performance and power consumption of a centralised and decentralised active vibration control system', Fraunhofer Institute for Structural Durability and System Reliability. (abstractfull paper )

ANT3-Wednesday 19 September 2018

10:10 van Ophem, S., Deckers, E., and Desmet, W., 'Efficient assembly of unit cells with krylov based model order reduction', KU Leuven. ( abstractfull paper )
10:35 Alvarez Blanco, M., Csurcsia, P. Z., Janssens, K., Peeters, B., and Desmet, W., 'Nonlinearity assessment of mimo electroacoustic systems on direct field environmental acoustic testing', Siemens Industry Software NV. (abstractfull paper )
11:00 Becht, P., van Ophem, S., Deckers, E., Claeys, C., Pluymers, B., and Desmet, W., 'Efficiently assessing changes in boundary conditions using vibro-acoustic information', KU Leuven. ( abstractfull paper )
11:25 Gonzalez, M., Salgado, O., Croes, J., Pluymers, B., and Desmet, W., 'Object-oriented model-based condition monitoring', IK4-Ikerlan. ( abstractfull paper )

Aeroacoustics and flow noise

AA-Tuesday 18 September 2018

13:35 Denayer, H., De Roeck, W., and Desmet, W., 'A recursive transfer admittance formulation in time domain', KU Leuven. ( abstractfull paper )
14:00 Grasso, G., Jaiswal, P., and Moreau, S., 'Monte-carlo computation of wall-pressure spectra under turbulent boundary layers for trailing-edge noise prediction', Ecole Centrale de Lyon. ( abstractfull paper )
14:25 Criscuolo, L., Denayer, H., De Roeck, W., and Desmet, W., 'Experimental analysis of aeroacoustic instabilities in helmholtz resonators', KU Leuven. ( abstractfull paper )
14:50 Marinus, B. G., Bontea, D., Halimi, A., and Pire, A., 'Broadband noise from serrated uas propellers: validation of a lattice boltzmann approach', RMA - Royal Military Academy. ( abstractfull paper )
15:15 Battista, G., Chiariotti, P., Martarelli, M., and Castellini, P., 'Inverse methods in aeroacoustic three-dimensional volumetric noise source localization', Università Politecnica delle Marche. ( abstractfull paper )


AE-Tuesday 18 September 2018

13:35 dos Santos, C. R., da Silva, M. M., and Marques, F. D., 'Metamodel-based optimization of an energy harvester from stall-induced pitching oscillations of airfoils', EESC, University of São Paulo. ( abstractfull paper )
14:00 Jacquier, B., and Ayme, F., 'On-line tracking of aircraft aeroelastic modes during flutter flight tests', ONERA - Office National d'Etudes et de Recherches Aérospatiales. ( abstractfull paper )
14:25 Giannelis, N. F., and Vio, G. A., 'On the effect of control surface deflections on the aeroelastic response of an aerofoil at transonic buffet conditions', The University of Sydney. ( abstractfull paper )
14:50 Siddiqui, M. F., Ertveldt, J., Decuyper, J., De Troyer, T., Schoukens, J., and Runacres, M. C., 'Development of a nonlinear state space model of the forces acting on an aerofoil oscillating in pitch', Vrije Universiteit Brussel. (abstractfull paper )
15:15 Wang, Z., and Popov, A. A., 'Computationally-efficient aeroelastic analysis tool for shortwing / propeller configuration on compound helicopters', University Of Nottingham. ( abstractfull paper )

Characterisation, design and optimisation of acoustic materials

CAM1-Wednesday 19 September 2018

08:30 Semeniuk, B. P., Goransson, P., and Dazel, O., 'Microstructure based modelling of the thermal and viscous dissipation of a transversely isotropic porous fibrous insulation material', KTH Royal Institute of Technology. (abstractfull paper )
08:55 Rouleau, L., and Deü, J.-F., 'Modelling of nonlinear prestrain effects on the dynamic properties of viscoelastic materials', LMSSC - Laboratoire de Mécanique des Structures et des Systèmes Couplés/ CNAM - Conservatoire National des Arts et Métiers. ( abstractfull paper )
09:20 Petrone, G., Sorrentino, A., De Bono, E., Polito, T., and Marulo, F.'Installation effects on sound absorption and flow resistivity of glass wool fibres', Università degli Studi di Napoli Federico II. ( abstractfull paper )
09:45 Deng, T., Sheng, X., Ma, Y., and Li, J., 'Simulations and experiments for vibro-acoustical behaviours of circular multi-layered plates', Southwest Jiaotong University. ( abstractfull paper )

CAM2-Wednesday 19 September 2018

10:35 Van den Wyngaert, J. C. E., Schevenels, M., and Reynders, E., 'Predicting the sound insulation of finite double-leaf walls with a flexible frame', KU Leuven. ( abstractfull paper )
11:00 Schrader, P., Duvigneau, F., Gavila-Lloret, M., Rottengruber, H., and Gabbert, U., 'Finite element analysis of the acoustic behavior of poroelastic materials based on experimentally determined frequency-dependent material properties', Otto-von-Guericke-University Magdeburg. ( abstractfull paper )
11:25 Manzari, L., Mao, H., Goransson, P., Cuenca, J., and Lopez Arteaga, I., 'Experimental-numerical methods for inverse characterization of the anisotropic-anelastic properties of porous materials, based on dynamic digital image correlation', KTH Royal Institute of Technology. ( abstractfull paper )

Condition monitoring

CM-Wednesday 19 September 2018

10:35 Randall, R. B., and Smith, W. A., 'Detection of faulty accelerometer mounting', UNSW - University of New South Wales. ( abstractfull paper )
11:00 Navarro, L. C., and Goes, L. C. S., 'Aircraft braking dynamics and brake system modeling for fault detection and isolation', FCMF - Fundação Casimiro Montenegro Filho. ( abstractfull paper )
11:25 Siano, D., and Panza, M. A., 'Employment of an auto regressive moving average model for on-board knock detection of a spark ignited engine', Istituto Motori CNR. ( abstractfull paper )

Condition monitoring of rotating machinery

CMRM1-Monday 17 September 2018

13:25 Buzzoni, M., Soave, E., D'Elia, G., Mucchi, E., and Dalpiaz, G., 'A diagnostic protocol for the monitoring of bearing fault evolution based on blind deconvolution algorithms', University of Ferrara. ( abstractfull paper )
13:50 Helsen, J., Peeters, C., Verstraeten, T., Verbeke, J., Gioia, N., and Nowé, A., 'Fleet-wide condition monitoring combining vibration signal processing and machine learning rolled out in a cloud-computing environment', Vrije Universiteit Brussel. ( abstractfull paper )
14:15 Pennacchi, P., Chatterton, S., and Vania, A., 'Development and testing of health monitoring of the bearings of traction system of a regional train locomotive during commercial service', Politecnico di Milano. ( abstractfull paper )
14:40 Peeters, C., Antoni, J., Gioia, N., Guillaume, P., and Helsen, J., 'A novelmulti-harmonic demodulation technique for instantaneous speed estimation', Vrije Universiteit Brussel. ( abstractfull paper )
15:05 Schmidt, S., Heyns, P. S., and Gryllias, K., 'A comparison of different features for discrepancy analysis-based bearing diagnostics', University of Pretoria. ( abstractfull paper )

CMRM2-Wednesday 19 September 2018

13:35 Cocconcelli, M., Cavalaglio Camargo Molano, J., Rubini, R., and Capelli, L., 'Experimental validation of a bearing fault model for an independent cart conveyor', University of Modena and Reggio Emilia. ( abstractfull paper )
14:00 Antoni, J., Borghesani, P., Kass, S., Raad, A., and Gryllias, K., 'Methodologies for designing new condition indicators', University of Lyon. ( abstractfull paper )
14:25 Ludwig, C. E., and Wever, U., 'Online fault identification for rotating machinery', Siemens AG. ( abstractfull paper )
14:50 Mauricio, A., Smith, W. A., Randall, R. B., Antoni, J., and Gryllias, K., 'Cyclostationary-based tools for bearing diagnostics', KU Leuven. ( abstractfull paper )
15:15 Michalak, A., Wyłomańska, A., Wodecki, J., Zimroz, R., and Gryllias, K., 'Optimal frequency band selection via stationarity testing in time frequency domain', KGHM CUPRUM Ltd. R&D. ( abstractfull paper )
15:40 Abboud, D., Marnissi, Y., and El-badaoui, M., 'Semi-blind wiener filtering of mechanical source vibrations: theory and application to aircraft gearbox surveillance', Safran Tech. ( abstractfull paper )


D-Tuesday 18 September 2018

08:30 Lisitano, D., Bonisoli, E., and Mottershead, J. E., 'Stabilised layer method for linear and nonlinear spatial non classical damping identification', Politecnico di Torino. ( abstractfull paper )
08:55 Böswald, M., Gröhlich, M., Biedermann, J., and Winter, R., 'Analysis and simulation of structures with local visco-elastic damping from elastomers', DLR - German Aerospace Center. ( abstractfull paper )
09:20 Umer, M., Gastaldi, C., and Botto, D., 'The effect of friction damping on the dynamic response of vibrating structures: an insight into model validation', Politecnico di torino. ( abstractfull paper )

Designs for noise reducing materials and structures

DNRMS1-Tuesday 18 September 2018

13:35 Van Damme, B., Hannema, G., and Zemp, A., 'Sound transmission through checkerboard sandwich panels', EMPA - Materials Science and Technology Research Institution. ( abstractfull paper )
14:00 Rice, H., Kennedy, J., and Goransson, P., 'Design of a kelvin cell acoustic metamaterial', Trinity College Dublin. ( abstractfull paper )
14:25 Opiela, K. C., Rak, M., and Zielinski, T. G., 'A concept demonstrator of adaptive sound absorber/insulator involving microstructure-based modelling and 3dprinting', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )
14:50 Dowling, L., Flanagan, L., Rice, H., Trimble, D., and Kennedy, J.'The use of a benchmark periodic metamaterial to inform numerical modelling and additive manufacturing approaches', Trinity College Dublin. ( abstract,full paper )
15:15 Sharma, N. L. K., and Umnova, O., 'Study of sound absorption capability of silencers based on the acoustic black hole effect', University of Salford. ( abstractfull paper )

DNRMS2-Wednesday 19 September 2018

08:30 Gaborit, M., Goransson, P., and Dazel, O., 'Simplification of the transfer matrix model for acoustic screens', Le Mans Université / KTH Royal Institute of Technology. ( abstractfull paper )
08:55 Godinho, L., Albino, C., Alves-Costa, P., Amado-Mendes, P., Pinto, A., and Soares Jr., D., 'A numerical study on the shielding performance of a periodic vibration protection device', University of Coimbra. ( abstractfull paper )
09:20 de Ryck, L., Cuenca, J., Jambrosic, K., Glorieux, C., Rychtarikova, M., Romero-Garcia, V., Cebrecos, A., Jiménez, N., and Groby, J.-P., 'Perceptual evaluation of metamaterials as insulation partitions: a listening test within the cost action denorms (ca15125)', Siemens Industry Software NV. ( abstractfull paper )

Dynamic testing: methods and instrumentation

DT1-Monday 17 September 2018

15:30 Delhez, E. J., Vanvinckenroye, H., Golinval, J.-C. J. G., and Denoël, V., 'Numerical and experimental study of first passage time of a steel strip subjected to forced and parametric excitations', University of Liege. ( abstract,full paper )
15:55 Ehrhardt, D. A., Gockel, B., and Beberniss, T., 'Response of a curved panel subjected to local heating and base excitation', Ehrhardt Engineering LLC. ( abstractfull paper )
16:20 Molina-Viedma, Á. J., González-Centeno, A., López-Alba, E., Felipe-Sesé, L., and Díaz, F., 'Effect of in-flight differential pressure in modal behaviour of an aircraft demonstrator using hs 3d-dic', Universidad de Jaén. (abstractfull paper )
16:45 Pandiya, N., Allemang, R. J., and Phillips, A. W., 'Design and validation of a nonlinear test rig with hardening stiffness in multiple degrees of freedom', Robert Bosch GmbH. ( abstractfull paper )
17:10 D'Elia, G., Musella, U., Mucchi, E., Peeters, B., and Guillaume, P., 'Drives power reduction procedure to fill in the multipleinput multiple-output random control reference matrix', University of Ferrara. ( abstractfull paper )
17:35 Winter, R., Heyen, S., and Böswald, M.'Fully automated vibration measurements of aircraft fuselages in the mid-frequency range', DLR – German Aerospace Center. ( abstractfull paper )
18:00 Khalil, M., Heinrich, C., Wüchner, R., and Bletzinger, K.-U., 'Robust algorithm for optimal configuration of a multi-type network of sensors', Siemens AG. ( abstractfull paper )

DT2-Tuesday 18 September 2018

15:40 Roettgen, D. R., Jones, E. M. C., Brink, A. R., Reu, P. L., Rohe, D. P., and Wagner, J., 'Nonlinear system identification using digital image correlation', Sandia National Laboratories. ( abstractfull paper )
16:05 Battarra, M., and Mucchi, E., 'Detecting cavitation inception in external gear pumps by means of vibro-acoustic measurements', University of Ferrara. ( abstractfull paper )
16:30 Slavič, J., Javh, J., and Boltežar, M., 'Spectral optical flow imaging: measuring full-field subpixel oscillations without a high-speed camera', University of Ljubljana. ( abstractfull paper )
16:55 Böswald, M., and Tang, M.'Hardware in the loop testing using a hydraulic shaking table', DLR - German Aerospace Center. ( abstractfull paper )
17:20 Jackson, S., Croxford, A. J., and Drinkwater, B. W., 'Statistical analysis of cup-horn ultrasonic proximity sensor output', University of Bristol. ( abstractfull paper )
17:45 Sels, S., Bogaerts, B., Vanlanduit, S., and Penne, R., 'Easy sensor localization using an rgb camera', University of Antwerp. ( abstractfull paper )

DT3-Wednesday 19 September 2018

13:35 Pennacchi, P., Cazzulani, G., Chieppi, M., and Colombo, A., 'Optimal positioning of continuous optical fiber sensors for the modal analysis of turbine blades with optical backscatter reflectometer technology', Politecnico di Milano. ( abstractfull paper )
14:00 Kreider, M., and Schwingshackl, C. W., 'Experimental evaluation of pressure dependent tangential contact stiffness', Imperial College London. ( abstractfull paper )
14:25 Leclère, Q., Antoni, J., Julliard, E., and Pintado-Peño, A., 'Consideration of estimation error in multiple coherence approaches: application to the inside/ outside coherence analysis of aircraft flight tests', INSA Lyon. (abstractfull paper )
14:50 Govers, Y., Meddaikar, M. Y., and Sinha, K., 'Model validation of an aeroelastically-tailored forward swept wing using fibre-optical strain measurements', DLR – German Aerospace Center. ( abstractfull paper )
15:15 Peres, M. A., and Barnard, A., 'Top 10 mechanical experiments for the teaching of sound and vibration in mechanical engineering', The Modal Shop, Inc.. ( abstractfull paper )
15:40 Allemang, R. J., Phillips, A. W., and Brown, D. L., 'Impact testing lightweight structures', UC-SDRL - University of Cincinnati, Structural Dynamics Research Laboratory. ( abstractfull paper )
16:05 Van Campen, A., Ooijevaar, T., Mannaerts, C., De Buyser, C., and Bartic, A., 'Vibration-based monitoring of the quality of clutch engagement in a forklift truck', Flanders Make. ( abstractfull paper )

Dynamics of civil structures

CIV-Monday 17 September 2018

15:30 Bonney, M. S., and Zabiégo, M., 'Validation of pirat, a novel tool for beam-like structures subject to seismic induced misalignment of guiding sleeves', CEA Cadarache. ( abstractfull paper )
15:55 Savnik, N. J., Katsanos, E. I., Amador, S., Ventura, C. E., and Brincker, R., 'Influence of diaphragm modelling on the dynamic performance of a reinforced concrete high-rise building', Technical University of Denmark. (abstractfull paper )
16:20 Furtmüller, T., Adam, C., and Veit-Egerer, R., 'Mass loading and temperature compensation for long-term ambient measurement data of a freeway bridge', University of Innsbruck. ( abstractfull paper )
16:45 Sanitate, G., and Talbot, J. P., 'Soil-structure interaction and the added-foundation effect of surface foundations with application to groundborne vibration in buildings', University of Cambridge. ( abstractfull paper )
17:10 Moliner, E., Galvín Barrera, P., Martínez-Rodrigo, M. D., and Romero Rodóñez, A., 'Influence of transverse bracing beams on the dynamic behaviour of arroyo bracea i bridge in madrid-sevilla high- speed railway line', Universitat Jaume I. ( abstractfull paper )
17:35 Poprawa, G., Pradelok, S., and Salamak, M., 'Specific dynamic response of truss railway bridge identified using operational modal analysis as an extension of typical dynamic load testing', Silesian University of Technology. ( abstractfull paper )
18:00 Schommer, S., Kebig, T., Nguyen, V. H., Zürbes, A., and Maas, S., 'Modelling of prestressed concrete bridges with 3 dimensional finite elements for structural health monitoring with model updating techniques', University of Luxembourg. ( abstractfull paper )

Dynamics of energy harvesters

HARV-Wednesday 19 September 2018

08:30 Alujević, N., Ćatipović, I., Senjanović, I., Vladimir, N., and Malenica, Š., 'Ship roll control and energy harvesting using a u-tube anti-roll tank', University of Zagreb. ( abstractfull paper )
08:55 Hu, G., Zhao, B., Tang, L., Liang, J., and Das, R., 'Modeling of partially covered piezoelectric energy harvester connected to seh interface circuit', The University of Auckland. ( abstractfull paper )
09:20 Liu, H., Zhou, D., and Wang, Y., 'A nonlinear vibration energy harvester for spacecraft', Beijing Institute of Spacecraft System Engineering. ( abstractfull paper )

Dynamics of joints

JOINT-Wednesday 19 September 2018

13:35 Kuether, R. J., and Najera-Flores, D. A., 'Response predictions of reduced models with whole joints', Sandia National Laboratories. ( abstractfull paper )
14:00 Brøns, M., Thomsen, J. J., Fidlin, A., Tcherniak, D., and Sah, S. M., 'Modal impact testing for estimating bolted joint tightness', Technical University of Denmark. ( abstractfull paper )
14:25 Willner, K.'Identification of contact parameters for dry friction joints', FAU Erlangen-Nürnberg. ( abstractfull paper )
14:50 Zare, I., and Allen, M. S.'A block-gauss seidel algorithm with static reduction to predict damping in bolted joints', University of Wisconsin - Madison. ( abstractfull paper )
15:15 Goyder, H. G. D., and Lancereau, D. P. T., 'Extracting natural frequency and damping from time histories. better than the frequency domain?', Cranfield University. ( abstractfull paper )
15:40 Balaji, N. N., and Brake, M. R. W.'The surrogate system hypothesis for joint mechanics: statement and evaluation through empirical parameter estimation', Rice University. ( abstractfull paper )
16:05 Goyder, H. G. D., Lancereau, D. P. T., Ind, P., and Brown, D., 'Two types of dynamic joint behaviour: theoretical and experimental analysis', Cranfield University. ( abstractfull paper )

Dynamics of rotating machinery

RMD1-Monday 17 September 2018

13:25 Kill, N. C., and d'Ambrosio, F., 'Extension of the multi-stage cyclic symmetry methodology and application to modal and dynamic response analyses', SAMTECH S.A.. ( abstractfull paper )
13:50 Mathes, S., Werner, U., and Christian, B., 'Numerical and experimental vibration analysis of a two-pole induction motor mounted on an elastic machine test bed', University of Applied Sciences Georg Simon Ohm Nuremberg. ( abstractfull paper )
14:15 Chipato, E. T., Shaw, A. D., and Friswell, M. I., 'Frictional effects on the synchronisation of partial contact in rotating machinery', Swansea University. ( abstractfull paper )
14:40 Dolev, A., Tresser, S., and Bucher, I., 'Balancing rotating structures using slow-speed data via optimized parametric excitation and nonlinear feedback', Technion. ( abstractfull paper )

RMD2-Tuesday 18 September 2018

13:35 Vania, A., Pennacchi, P., Chatterton, S., and Cangioli, F., 'Rotor-to-seal rubs in a steam turbine caused by deposits of carbonized oil', Politecnico di Milano, Dept. of Mechanical Engineering. ( abstractfull paper )
14:00 Wramner, L. M., Berbyuk, V., and Johansson, H., 'Vibration dynamics in non-linear dual mass flywheels for heavy-duty trucks', Chalmers University of Technology / AB Volvo. ( abstractfull paper )
14:25 Razpotnik, M., Čepon, G., and Boltežar, M., 'Dynamic characterisation of rolling-element bearings - implementation of smooth contact-state transition', University of Ljubljana, Faculty of Mechanical Engineering. ( abstract,full paper )
14:50 Pourkiaee, S. M., Zucca, S., and Parker, R. G., 'Relative cyclic component mode synthesis and its application to nonlinear vibration analysis of mistuned bladed disks with friction joints', Politecnico di Torino. ( abstractfull paper )

RMD3-Tuesday 18 September 2018

15:40 Shaw, A. D., Champneys, A. R., and Friswell, M. I., 'Solution of rotor stator contact problems with the method of normal forms', Swansea University. ( abstractfull paper )
16:05 Picou, A., Capiez-Lernout, E., Soize, C., and Mbaye, M., 'Effects of geometrical nonlinearities for a rotating intentionally mistuned bladed-disk', Université Paris-Est. ( abstractfull paper )
16:30 Sghaier, E., Bourdon, A., Rémond, D., Dion, J.-L., and Peyret, N., 'A novel identification tool for rotors working under nonstationary conditions based on the ias', LaMCoS / Quartz. ( abstractfull paper )
16:55 Byrtus, M., Hajžman, M., Pešek, L., and Půst, L., 'Influence of internal friction dampers on global dynamics of discrete cyclic structure', University of West Bohemia. ( abstractfull paper )
17:20 Passos, S., Manin, L., Rémond, D., Sauvage, O., Rota, L., and Besnier, E., 'Experimental investigation on timing belt drive dynamics with non-circular pulley', Groupe PSA. ( abstractfull paper )

Fluid-structure interaction

FSI-Tuesday 18 September 2018

13:35 Akkaoui, Q., Capiez-Lernout, E., Soize, C., and Ohayon, R., 'Nonlinear dynamical analysis of a fluid-structure computational model with sloshing and capillarity', MSME - Laboratoire Modélisation et Simulation Multi Echelle. ( abstractfull paper )
14:00 Buck, F., Hetzler, H., Fruend, E., and Oexl, S., 'Energy dissipation due to sloshing in baffled fuel tanks', University of Kassel. ( abstractfull paper )
14:25 Petersen, Ø. W., and Øiseth, O., 'Efficient time-domain modeling of floating structures with fluid-structure interaction by reduced order state-space approximations', NTNU - Norwegian University of Science and Technology. ( abstractfull paper )
14:50 Beberniss, T.'High-speed 3d dic random dynamic strain measurement of a panel subjected to mach 2 flow', United States Air Force Research Lab. ( abstractfull paper )

Inverse methods - load identification

INV-Monday 17 September 2018

16:20 Yu, Y., and Hopkins, C., 'Using wavelet deconvolution method to determine the force applied by drops of water on dry plates and plates with shallow surface water', University of Liverpool. ( abstractfull paper )
16:45 Taghipour, J., Haddad Khodaparast, H., Friswell, M. I., Madinei, H., Jalali, H., and Wang, X., 'Localisation, characterisation and identification of localised nonlinearity in structural dynamics using base excitation frequency response functions', Swansea University. ( abstractfull paper )
17:10 Álvarez-Briceño, R. P., and de Oliveira, L.'Random force identification via kalman filtering on a cantilevered structure', EESC, University of São Paulo. ( abstractfull paper )
17:35 Cuenca, J., Goransson, P., De Ryck, L., and Lähivaara, T., 'Inverse parameter estimation in resonant, coupled fluid-structure interaction problems', Siemens Industry Software NV. ( abstractfull paper )
18:00 Petersen, Ø. W., Øiseth, O., and Lourens, E.-M., 'Identification of wave forces from acceleration and wave elevation data using inverse methods and spectral wave field reconstruction', NTNU - Norwegian University of Science and Technology. ( abstractfull paper )

Lightweight structures and materials

LW-Tuesday 18 September 2018

08:30 Vanclooster, K., Spina, L., Donders, S., Lombardi, R., D’Ippolito, R., Farkas, L., and Mundo, D., 'Linking manufacturing simulation with functional performance engineering for composites applications', Siemens Industry Software NV. ( abstractfull paper )
08:55 Thierry, V., and Brown, L., 'Multi-scale modelling of periodic textile composites and wave propagation simulation', University of Nottingham. ( abstractfull paper )
09:20 Pereira, D. d. A., Guimaraes, T. A. M., and Rade, D. A., 'Modal frequency and damping analysis of tow steered cfrp composite plates', Aeronautics Institute of Technology. ( abstractfull paper )

Medium and high frequency techniques

MHF1-Monday 17 September 2018

13:25 Borello, G., Gagliardini, L., Lambert, T., and Abettan, I., 'Narrow band analysis of structure borne noise in complex dynamical systems using energy methods', InterAC. ( abstractfull paper )
13:50 Morita, S., Hartmann, T., and Tanner, G., 'Dynamical energy analysis modelling by using transfer path analysis', Yanmar R&D Europe. ( abstractfull paper )
14:15 Malik, M. K., Chronopoulos, D., Tanner, G., Essa, Y., and de la Escalera Cutillas, F., 'A fast and efficient approach for simulating ultrasonic waves and their interaction with defects in periodic structures', University of Nottingham. ( abstractfull paper )
14:40 Reynders, E., and Langley, R. S., 'Band-averaged variance prediction in the hybrid deterministic – statistical energy analysis of vibro-acoustic systems', KU Leuven. ( abstractfull paper )

MHF2-Tuesday 18 September 2018

16:05 Dannemann, M., Kucher, M., Weber, M.-T., and Modler, N., 'An experimental investigation of the three-dimensional vibration characteristics of ultrasonic irrigation tips', Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology (ILK). ( abstractfull paper )
16:30 Mohammed, N. M., Creagh, S., Tanner, G., and Chappell, D., 'Tunnelling corrections to wave transmissions on shell structures', University of Nottingham. ( abstractfull paper )
16:55 Carcaterra, A., Roveri, N., and Akay, A., 'Connectivity in waves and vibrations: one-to-six, one-to-all, all-to-all and random connections', Sapienza University of Rome. ( abstractfull paper )

Model order reduction

MOR-Tuesday 18 September 2018

08:30 Schilder, J. P., Segeth, F. M., Ellenbroek, M. H. M., van den Belt, M., and de Boer, A., 'Model order reduction of large stroke flexure hinges using modal derivatives', University of Twente. ( abstractfull paper )
08:55 Meyrand, L., Sarrouy, E., Cochelin, B., and Ricciardi, G., 'A full pgd/hbm-based algorithm for a low-dimensional nnm continuation with modal enrichment', LMA, Aix-Marseille University. ( abstractfull paper )
09:20 Rumpler, R., Rodríguez Sánchez, R., and Goransson, P., 'Amultivariate, well-conditioned asymptotic waveform evaluation for finite element solutions with complex parametric dependence', KTH Royal Institute of Technology. ( abstractfull paper )
09:45 Naets, F., Tamarozzi, T., Rottiers, W., Donders, S., Van der Auweraer, H., and Desmet, W., 'Model order reduction for nonlinear dynamics engineering applications', KU Leuven. ( abstractfull paper )
10:10 Mas, P., Maddina, S. B., Marques dos Santos, F. L., Sobie, C., and Van der Auweraer, H., 'The application of artificial neural networks in mechatronics system development', Siemens Industry Software NV. ( abstractfull paper )

Modeling, testing, and optimization of acoustic metamaterials

MTOA-Tuesday 18 September 2018

11:00 Mencik, J.-M., Denis, V., Caliez, M., and Méo, S., 'Application of the wave finite element method to the analysis of locally resonant band gaps in periodic structures with viscoelastic properties', INSA Centre Val de Loire. (abstractfull paper )
11:25 Nobrega, E. D., Gobert, M.-L., Dos Santos, J. M. C., and Mencik, J.-M., 'Investigating simple designs of phononic crystal plates and their influence on the wave propagation properties', INSA Centre Val de Loire. ( abstract,full paper )
11:50 Assis, G. F. C. A., Miranda Jr., E. J. P., Beli, D., Camino, J. F., Dos Santos, J. M. C., and Arruda, J. R. F.'Computing the dispersion diagramand the forced response of periodic elastic structures using a state-space formulation', Unicamp - University of Campinas. ( abstractfull paper )

Multi-body dynamics and control

MB1-Tuesday 18 September 2018

08:30 Werner, U.'Increasing the threshold of vibration stability of soft mounted induction motors with elastic rotors and sleeve bearings using active motor foot mounts', University of Applied Sciences Georg Simon Ohm Nuremberg. ( abstractfull paper )
08:55 Plöger, D. F., Jungblut, J., Zech, P., and Rinderknecht, S., 'Separation of structural response and excitation characteristics in planetary gearboxes', TU Darmstadt. ( abstractfull paper )
09:20 Werner, D., Falkenberger, S., Graf, B., Wegerer, F., Neher, J., and Wender, B., 'Full model multibody approach for the sound calculation of gearboxes', University of Applied Sciences of Ulm. ( abstractfull paper )
09:45 Goth, Y.'Comparison of finite-element methods to compute the transmission error to noise transfer function of a simple gear box', CETIM - Centre Technique des Industries Mécaniques. ( abstractfull paper )

MB2-Tuesday 18 September 2018

10:35 van den Belt, M., Schilder, J. P., and Brouwer, D. M., 'An absolute interface coordinates floating frame of reference formulation for plates', University of Twente. ( abstractfull paper )
11:00 Asrih, K., Naets, F., and Desmet, W., 'Inertia optimization of a high-speed cutting mechanism under dynamic displacement constraints', KU Leuven. ( abstractfull paper )
11:25 Alessio, C., Park, D., Mundo, D., Tamarozzi, T., and Rezayat, A., 'Modal behavior and transient dynamic analysis of a planetary gear train with time-varying mesh stiffness using a multibody model', University of Calabria. (abstractfull paper )
11:50 Karamooz Mahdiabadi, M., and Rixen, D. J.'Non-intrusive model-order reduction of geometrically nonlinear finite elements: enhancement with static augmentation', Technical University of Munich. ( abstractfull paper )

Non-linearities: identification and modelling

NL1-Tuesday 18 September 2018

08:30 Gunn, B., Theodossiades, S., and Rothberg, S., 'A nonlinear energy harvester for torsional oscillations', Loughborough University. ( abstractfull paper )
08:55 Decuyper, J., De Troyer, T., Runacres, M. C., Tiels, K., and Schoukens, J., 'On selecting appropriate training data to model an autonomous oscillator', Vrije Universiteit Brussel. ( abstractfull paper )
09:20 Roccia, B. A., Verstraete, M. L., Dimitriadis, G., Brüls, O., and Preidikman, S., 'Unsteady aerodynamics and nonlinear dynamics of freefalling rotating seeds', University of Liege. ( abstractfull paper )
09:45 Manson, G.'Predicting nonlinear system responses without a single simulation', University of Sheffield. ( abstractfull paper )

NL2-Tuesday 18 September 2018

10:35 Roncen, T., Sinou, J.-J., and Lambelin, J.-P., 'Experiments and simulations of an industrial assembly with nonlinear joints subjected to harmonic and random vibrations', CEA. ( abstractfull paper )
11:00 Di Maio, D.'Modal analysis of an isolated nonlinear response mode using the nyquist circle properties: numerical case', University of Twente. ( abstractfull paper )
11:25 Vesterholm, K. K., Brincker, R., and Brandt, A., 'Linearization of modal parameters in duffing oscillator using the random decrement technique', University of Southern Denmark. ( abstractfull paper )

NL3-Wednesday 19 September 2018

08:30 Jahn, M., Tatzko, S., Panning-von Scheidt, L., and Wallaschek, J., 'Computation of nonlinear modes of non-conservative mechanical systems', Leibniz University Hannover, Institute of Dynamics and Vibration Research. (abstractfull paper )
08:55 Van Damme, C. I., Madrid, A. E., and Allen, M. S.'Using the harmonic balance method to directly compute nnms of geometrically nonlinear finite element models', University of Wisconsin - Madison. ( abstractfull paper )
09:20 Kasper, T., Tatzko, S., and Wallaschek, J., 'Nonlinear time series analysis of drillstring lateral vibrations', Leibniz University Hannover. ( abstractfull paper )
09:45 Brunetti, J., D'Ambrogio, W., Hoffmann, N., and Massi, F., 'Investigating the bi-stable behavior of a lumped system with frictional contact', Università dell'Aquila. ( abstractfull paper )

OMA1-Monday 17 September 2018

15:55 Tsai, C.-Y., Chan, Y. J., Chen, J.-L., Chao, C.-L., and Chien, S.-Y., 'Optimal parameters in data-driven stochastic subspace identification in operational modal analysis', National Chung Hsing University. ( abstractfull paper)
16:20 Vigsø, M., Kabel, T., Tarpø, M., Brincker, R., and Georgakis, C. T., 'Operational modal analysis and fluid-structure interaction', Aarhus University. ( abstractfull paper )
16:45 Lagerblad, U., Wentzel, H., and Kulachenko, A., 'Fatigue damage prediction based on strain field estimates using a smoothed kalman filter and sparse measurements', KTH Royal Institute of Technology / Scania AB. (abstractfull paper )
17:10 Gioia, N., Peeters, C., Daems, P. J., Guillaume, P., and Helsen, J., 'Dealing with harmonics in continuous modal analysis', Vrije Universiteit Brussel. ( abstractfull paper )
17:35 Ma, Z.-S., Ding, Q., and Wang, B., 'Output-only recursive identification of time-varying systems subject to gross errors', Tianjin University. ( abstractfull paper )
18:00 Zhao, M., and Yue, L.'Operational modal analysis of a turbine in big noise environment', Nanjing University of Aeronautics and Astronautics. ( abstractfull paper )

OMA2-Tuesday 18 September 2018

10:10 Tarpø, M., Olsen, P., Juul, M., Amador, S., Friis, T., and Brincker, R., 'Statistical error reduction for correlation-driven operational modal analysis', Aarhus University. ( abstractfull paper )
10:35 Csurcsia, P. Z., Peeters, B., and Schoukens, J., 'Regularized time-varying operational modal analysis illustrated on a wind tunnel testing measurement', Siemens Industry Software NV.. ( abstractfull paper )
11:00 Marrongelli, G., Magalhães, F., Gentile, C., and Cunha, Á., 'Automated modal identification in operational conditions using 3d stabilization diagrams', Politecnico di Milano. ( abstractfull paper )
11:25 Kang, J., Liu, L., Zhou, S. D., and Yu, L., 'Operational modal analysis based on time-domain expansion of transmissibility', Beijing Institute of Technology. ( abstractfull paper )

Parameter estimation

PE-Wednesday 19 September 2018

08:30 Feng, N., Hahn, E. J., and Yu, M., 'Identification of the modal parameters of systems with general damping', University of New South Wales. ( abstractfull paper )
08:55 Christensen, S. S., and Brandt, A., 'Automatic operational modal analysis using statistical modelling of pole locations', University of Southern Denmark. ( abstractfull paper )
09:20 Gres, S., Döhler, M., Andersen, P., and Mevel, L., 'Variance computation of the modal assurance criterion', Aalborg University. ( abstractfull paper )
09:45 Musella, U., Longo, A., Vettori, S., Waimer, S., Di Lorenzo, E., Peeters, B., Marulo, F., and Guillaume, P., 'Recent advances in swept sine controlled excitation and processing for multi-input multi-output frfs estimation', Siemens Industry Software NV. ( abstractfull paper )
10:10 Soal, K., Govers, Y., Bienert, J., and Bekker, A., 'Automatic modal parameter selection using a statistical model and a kalman filter', DLR – German Aerospace Center. ( abstractfull paper )

Pass-by noise

PBNv2-Tuesday 18 September 2018

08:30 Papaioannou, A., Elliott, S. J., and Cheer, J., 'Approaches to the remote mapping of vehicle noise sources in a reverberant environment', University of Southampton. ( abstractfull paper )
08:55 Alkmim, M. H., Cuenca, J., De Ryck, L., and Goransson, P., 'Model-based acoustic characterisation of muffler components and extrapolation to inhomogeneous thermal conditions', Siemens Industry Software NV. ( abstract,full paper )
09:20 Kournoutos, N., Cheer, J., and Elliott, S. J., 'The design of a low-cost directional warning sound system for electric vehicles', University of Southampton. ( abstractfull paper )

Periodic structures and metamaterials

PER1-Tuesday 18 September 2018

13:35 Vered, Y., and Bucher, I., 'Tailoring phononic-like topologies for controlling the structural-acoustic coupling in fluid-filled cylinders', Technion. ( abstractfull paper )
14:00 Zaccherini, R., Palermo, A., Krödel, S., Dertimanis, V. K., Marzani, A., Daraio, C., and Chatzi, E. N., 'Resonant metabarriers as seismic attenuators in granular media', ETH Zürich. ( abstractfull paper )
14:25 Henneberg, J., Gomez Nieto, J. S., Sepahvand, K., Gerlach, A., Cebulla, H., and Marburg, S., 'The influence of uncertainties in periodic structures for vibro-acoustic problems', Technical University of Munich. ( abstractfull paper )
14:50 Droz, C., Boukadia, R. F., Ichchou, M., and Desmet, W., 'Diffusion-based design of locally resonant sub-systems using a reduced wave finite element framework', Ecole Centrale de Lyon, LTDS. ( abstractfull paper )

PER2-Wednesday 19 September 2018

11:00 Zhou, T., and Cheng, L.'Broadband resonance suppressions using a resonant beam damper with embedded acoustic black hole features', Hong Kong Polytechnic University. ( abstractfull paper )
11:25 Hanford, A., Kerrian, P., Beck, B., and Capone, D., 'Metamaterial characterization for acoustic cloaking applications', The Pennsylvania State University. ( abstractfull paper )
11:50 Rocha de Melo Filho, N. G., Van Belle, L., Claeys, C., Deckers, E., and Desmet, W., 'Attenuation of the mass-spring-mass effect in the sound transmission loss of double panel partitions using vibroacoustic resonant metamaterials', KU Leuven. ( abstractfull paper )

Railway dynamics and ground vibrations

RAIL-Wednesday 19 September 2018

13:35 Lai, V. V., Chiello, O., Brunel, J.-F., and Dufrénoy, P., 'Dynamic fem simulation of wheel-rail rolling contact with friction in an eulerian frame - application to curve squeal', Laboratoire de Mécanique de Lille. ( abstractfull paper )
14:00 Rustighi, E., Leclère, Q., and Muggleton, J. M., 'Apodization and phase methods applied to the seismic detection of underground objects', University of Southampton. ( abstractfull paper )
14:25 Ramiro Redondo, C., Pintado Sanjuán, P., Morales Robredo, A. L., Nieto Quijorna, A. J., and Chicharro Higuera, J. M., 'Optimization of flow restrictor diameter in high speed railway vehicle suspensions', University of Castilla-La Mancha. ( abstractfull paper )
14:50 Blanco, B., Kari, L., Gil-Negrete, N., and Alonso, A., 'Modelling of the track supports with elements over elastic foundation together with dynamic internal degrees of freedom', CEIT. ( abstractfull paper )
15:15 Lewis, T. D., Li, Y., Jiang, J. Z., Neild, S., Tucker, G., Iwnicki, S., Goodall, R., and Smith, M., 'Enabling the optimisation of the primary suspension with passive components for an industrial railway vehicle model', University of Bristol. ( abstractfull paper )
15:40 Zdziebko, P., Martowicz, A., and Uhl, T.'An investigation on the influence of pantograph friction on its interaction with a catenary using co-simulations', University of Science and Technology AGH. ( abstractfull paper )

Self-excited vibrations

SEV-Tuesday 18 September 2018

16:05 Bergeot, B., Bellizzi, S., and Berger, S., 'Mitigation of friction-induced vibrations in braking systems: prediction of the mitigation limit', INSA Centre Val de Loire. ( abstractfull paper )
16:30 Gibbons, T. J., Ozturk, E., Xu, L., and Sims, N. D., 'Structural modification of tool holder geometry as a chatter avoidance method', University of Sheffield. ( abstractfull paper )
16:55 Kappauf, J., and Hetzler, H., 'Bifurcations and limit cycles due to self-excitation in nonlinear systems with joint friction: phenomena and approximation schemes', University of Kassel. ( abstractfull paper )
17:20 Cooper, J.'Flutter testing using ambient excitation', University of Bristol. ( abstractfull paper )

Structural dynamics: methods and case studies

SD1-Monday 17 September 2018

15:55 Park, M., Abolfathi, A., Biggs, J., and Ventikos, Y., 'Developing and analysing an electromechanical model of a bio-inspired flapping wing mini uav', University College London. ( abstractfull paper )
16:20 Kurka, P., Paiva, V., Teixeira, L., Izuka, J., and Gonzalez, P., 'Dynamic behavior and vibration analysis of tensegrity - membrane structures', Unicamp - University of Campinas. ( abstractfull paper )
16:45 Bucher, I.'Contactless 3d manipulation of silicon wafers using acoustic levitation', Technion. ( abstractfull paper )
17:10 Martin, G., Balmes, E., Vermot des Roches, G., and Chancelier, T., 'Squeal measurement with 3d scanning laser doppler vibrometer: handling of the time varying system behavior and analysis improvement using fem expansion', SDTools. ( abstractfull paper )
17:35 Camino, J. F., and Santos, I. F., 'A periodic h2 state feedback controller for a rotor-blade system', Unicamp - University of Campinas. ( abstractfull paper )

SD2-Tuesday 18 September 2018

08:30 Timmermans, S., and Vandepitte, D., 'Model-based analysis of the dynamic behaviour of the wing drive line of a robotic hummingbird', KU Leuven. ( abstractfull paper )
08:55 Waters, T., Harris, P., Mulchandani, H., and Stothers, I., 'Focussing flexural waves for accretion removal from a beam', University of Southampton. ( abstractfull paper )
09:20 Kapsalas, C. N., Fassois, S. D., and Sakellariou, J. S., 'Non-stationary random vibration modeling and analysis: kernel versus adaptable functional series tar methods', University of Patras. ( abstractfull paper )

SD3-Tuesday 18 September 2018

10:10 Weidauer, T., and Willner, K., 'Numerical and experimental modal analysis of structures under gyroscopic influence in ale formulation', FAU Erlangen-Nürnberg. ( abstractfull paper )
10:35 Fukui, K., and Noda, T., 'Electromagnetic vibration analysis of main transformer for railway', Mitsubishi Electric Corporation. ( abstractfull paper )
11:00 Saltari, F., Dessi, D., Faiella, E., and Mastroddi, F., 'Load and deflection estimation of a fast catamaran towingtank model via reduced order modeling and optimal natural observer', Sapienza University of Rome. ( abstract,full paper )
11:25 De Munter, W., Delabie, T., and Vandepitte, D., 'Characterization of reaction wheel micro-vibrations', KU Leuven. ( abstractfull paper )

SD4-Wednesday 19 September 2018

10:10 Nikolaev, S., Kiselev, I., Kuts, V., and Voronov, S., 'Simulation and experimental validation of gas-engine blade dynamics during milling', Skolkovo Institute of Science and Technology. ( abstractfull paper )
10:35 Burgert, J., Moilanen, C., Seemann, W., Montonen, J., Miettinen, J., and Saarenrinne, P., 'Pneumatic single hit test rig for analysis of the stress wave profile of non-uniform impacting rods', Karlsruhe Institute of Technology. (abstractfull paper )
11:00 Van der Auweraer, H., Donders, S., Hartmann, D., and Desmet, W., 'Simulation and digital twin for mechatronic product design', Siemens Industry Software NV. ( abstractfull paper )
11:25 Gil-Negrete, N., Nieto Quijorna, A. J., Pradera-Mallabiabarrena, A., and Gonzalez-Prada, J., 'On the dynamic stiffness of air springs at medium-high frequencies', CEIT. ( abstractfull paper )

Structural health monitoring

SHM1-Monday 17 September 2018

13:25 Gardner, P., Lord, C., and Barthorpe, R. J., 'A multi-level uncertainty integration strategy for forward model-driven shm', University of Sheffield. ( abstractfull paper )
13:50 Aravanis, T.-C. I., Sakellariou, J. S., and Fassois, S. D.'Railway suspension fault detection under variable operating conditions via random vibration signals and the stochastic functional model based method', University of Patras. ( abstractfull paper )
14:15 Walker, S., Lord, C., Dervilis, N., Papatheou, E., and Worden, K.'On the use of pseudo-damage to represent damage to structures in population-based structural health monitoring', University of Exeter. ( abstractfull paper)
14:40 Habtour, E., Dragman, T., Masmeije, T., Di Maio, D., Haynes, R., Homborg, A., and Tinga, T., 'Connecting nonlinearities: damage precursors detection and control methodology', us army research laboratory. ( abstractfull paper )
15:05 Anastasopoulos, D., De Roeck, G., and Reynders, E., 'Modal strain identification using sub-microstrain fiber-optic bragg grating data for damage detection of prestressed concrete structures', KU Leuven. ( abstractfull paper )
15:30 Marwitz, S., and Zabel, V., 'Relations between the quality of identified modal parameters and measured data obtained by structural monitoring', Bauhaus University Weimar. ( abstractfull paper )

SHM2-Tuesday 18 September 2018

16:05 Kullaa, J.'Robust damage detection using bayesian virtual sensing with noise reduction and environmental effect elimination capabilities', Metropolia University of Applied Sciences. ( abstractfull paper )
16:30 Vollmering, M., and Lenzen, A., 'Application of h-infinity estimation and oblique projections for experimental damage identification by sp2e', Leipzig University of Applied Sciences. ( abstractfull paper )
16:55 Denis, V., and Mencik, J.-M., 'A wave-based optimization strategy of curved joints for improved defect detection in coupled waveguides', INSA Centre Val de Loire. ( abstractfull paper )
17:20 Wally, G., McIlwraith, C., and Hutchinson, M., 'Vibration integrity assessment on lng process pipework using a combined experimental and analytical approach', Wood PLC. ( abstractfull paper )
17:45 Blachowski, B., Swiercz, A., and Jankowski, Ł., 'Virtual distortion method based optimal sensor placement for damage identification', Institute of Fundamental Technological Research, Polish Academy of Sciences. (abstractfull paper )

SHM3-Wednesday 19 September 2018

13:35 Papatheou, E., Manson, G., and Worden, K., 'Pseudo-faults (or damage metaphors) for shm: a discussion on their practical use', University of Exeter. ( abstractfull paper )
14:00 Nalliah, P., Lewis, A., Lomax, C., and Hawkins, C., 'A methodology using health and usage monitoring system data for payload life prediction', University of Hertfordshire. ( abstractfull paper )
14:25 Milana, S., Acunzo, G., Gabriele, S., Culla, A., and Argento, G. R., 'Multi-level damage identification in operational condition', Sapienza University of Rome. ( abstractfull paper )
14:50 Cofré, S., Kobrich, P., López Droguett, E., and Meruane, V.'Transmissibility based structural assessment using deep convolutional neural network', Universidad de Chile. ( abstractfull paper )
15:15 Pinto, M., Roveri, N., Pepe, G., Nicoletti, A., Balconi, G., and Carcaterra, A., 'Embedded optical sensors for vibration monitoring of large structures', Sapienza University of Rome. ( abstractfull paper )
15:40 Fritzen, C.-P., Ginsberg, D., and Loffeld, O., 'Vibration-based structural damage identification using sparsity constrained extended kalman filter concept', University of Siegen. ( abstractfull paper )
16:05 Maia, N., Neves, M. M., and Silva, T. A. N., 'Transmissibility versus damage detection', IDMEC - Instituto Superior Técnico. ( abstractfull paper )

Substructuring and coupling

SC1-Monday 17 September 2018

13:25 Miguez, D., Farrell, O., Bannister, M. O., Arbabi, R., Moorhouse, A. T., and Elliott, A. S., 'Substructuring approach and blocked forces method: application for structure-borne vibration prediction in heavy weight assemblies', Farrat Isolevel / Salford University. ( abstractfull paper )
13:50 Carniel, X., Champain, J., Gardin, T., and Pavic, G., 'Characterization of dynamic forces generated by an active component: experimental validation of the block sensor method', CETIM - Centre Technique des Industries Mécaniques. ( abstractfull paper )
14:15 Brunetti, J., D'Ambrogio, W., and Fregolent, A., 'Contact problems in the framework of dynamic substructuring', Università dell'Aquila. ( abstractfull paper )
14:40 Haeussler, M., Klaassen, S., and Rixen, D. J., 'Comparison of substructuring techniques for experimental identification of rubber isolators dynamic properties', Technical University of Munich. ( abstractfull paper )

SC2-Tuesday 18 September 2018

16:05 Pavic, G.'Vibration response of a solid volume of arbitrary shape using the boundary forming approach', INSA Lyon. ( abstractfull paper )
16:30 Bylin, A., Gibanica, M., and Abrahamsson, T. J. S., 'Experimental-analytical state-space synthesis of passenger car components', Chalmers University of Technology / Volvo Car Corporation. ( abstractfull paper )
16:55 Pasma, E., Klaassen, S., Nieuwenhuijse, L., van der Seijs, M., and Lennström, D., 'Application of system equivalent model mixing (semm) to model the structural dynamic properties of a complex vehicle component using numerical and experimental data', ( abstractfull paper )
17:20 Oltmann, J., Hartwich, T., and Krause, D., 'Design of particle dampers for lightweight structures using frequency based substructuring', Hamburg University of Technology. ( abstractfull paper )
17:45 Battiato, G., and Firrone, C. M., 'Reduced order modeling for forced response prediction of structures with large contact interfaces', Politecnico di Torino. ( abstractfull paper )

Transfer path analysis

TPA-Wednesday 19 September 2018

08:30 Freund, J., and Vöhringer, T., 'Use cases for vehicle tpa: from shock absorbers to electric drive', ZF Friedrichshafen AG. ( abstractfull paper )
08:55 Crispin, C., Mertens, C., and Dijckmans, A., 'Empirical formula for the vibration reduction index of junctions with different coplanar walls', BBRI - Belgian Building Research Institute. ( abstractfull paper )
09:20 Biedermann, J., Winter, R., Norambuena, M., and Böswald, M., 'A hybrid numerical and experimental approach for structural intensity analysis of stiffened lightweight structures', DLR – German Aerospace Center. (abstractfull paper )
09:45 Schedlinski, C., Marzok, C., and Wiesendahl, U., 'Application of operational test data and transfer path analysis to a test bench for optical systems', ICS Engineering GmbH. ( abstractfull paper )
10:10 Ortega Almirón, J., Bianciardi, F., Corbeels, P., and Desmet, W., 'Predicting vibration levels on an experimental test case by using invariant loads (e.g. blocked forces) as source characterization', Siemens Industry Software NV. ( abstractfull paper )

Tuned vibration absorbers and dampers

TVD-Monday 17 September 2018

13:25 Berardengo, M., Manzoni, S., Vanali, M., and Conti, A. M., 'Passive multi-mode piezoelectric shunt damping: an approach based on matrix inequalities', Università degli Studi di Parma. ( abstractfull paper )
13:50 Soubeyroux, M., Dumoulin, C., and Deraemaeker, A.'Optimization of tuned mass damper parameters based on numerical optimization and model reduction', Université Libre de Bruxelles. ( abstractfull paper )
14:15 SILVA, C. A. F., MANIN, L., RINALDI, R. G., AMEIL, J., Besnier, E., and Andrianoely, M.-A., 'Dynamics of torsional vibration damper (tvd) pulley: implementation of elastomeric constitutive law', INSA Lyon, LaMCoS. (abstractfull paper )
14:40 Darleux, R., Lossouarn, B., and Deü, J.-F., 'Effect of temperature on the tuning of a piezoelectric resonant shunt composed of variable inductance or variable capacitance', LMSSC - Laboratoire de Mécanique des Structures et des Systèmes Couplés. ( abstractfull paper )
15:05 Dekemele, K., Van Torre, P., and Loccufier, M., 'Optimization of multi-modal targeted energy transfer performance of nonlinear passive vibration absorbers', Ghent University. ( abstractfull paper )

USD – applications

USDA1-Monday 17 September 2018

16:20 Brizard, D.'Experimental measurement of value and associated uncertainty of wave speed in hopkinson bars with an accurate and robust method', IFSTTAR. ( abstractfull paper )
16:45 Bui, T. A., Lardeur, P., and Oudjene, M., 'Experimental study of vibration uncertainty of multilayered timber beams assembled through wood dowels', Université de Lorraine. ( abstractfull paper )
17:10 Giunta, F., Muscolino, G., and Sofi, A.'Fatigue analysis of wind excited structures with structural parameters affected by uncertainties described by interval variables', University "Mediterranea" of Reggio Calabria. (abstractfull paper )
17:35 Hoppe, K.-A. H., Langer, P., and Marburg, S., 'Efficient bolted joint modeling for industrial applications - empirical and analytical approaches', Technical University of Munich. ( abstractfull paper )

USDA2-Tuesday 18 September 2018

08:30 Vishwanathan, A., and Vio, G. A., 'Experimental application of random matrix theory to quantify modal uncertainty in aircraft t-tails', University of Sydney. ( abstractfull paper )
08:55 Gonzalez Anaya, J. A., and Dunne, J. F., 'Catastrophic event prediction associated with road vehicle dynamic responses and randomly uncertain suspension parameters', University of Sussex. ( abstractfull paper )
09:20 Germonpré, M., Papadopoulos, M., Degrande, G., and Lombaert, G., 'The influence of the uncertainty on dynamic soil properties on the prediction of railway induced vibration', KU Leuven. ( abstractfull paper )

USD – methods

USDM1-Tuesday 18 September 2018

10:10 Capiez-Lernout, E., and Soize, C., 'Uncertain quantification in nonlinear dynamics with an high-dimensional computational model', Universite Paris-Est. ( abstractfull paper )
10:35 Li, S., Mace, B. R., and Dhupia, J. S., 'Vibration analysis of a structure with an attachment at an uncertain location using parametric model order reduction with krylov subspaces', The University of Auckland. ( abstractfull paper )
11:00 Fuentes, R., Dervilis, N., Tcherniak, D., Worden, K., and Cross, E. J., 'Outlier analysis under uncertainty: applications to structural health monitoring', University of Sheffield. ( abstractfull paper )
11:25 Adhikari, S., and Friswell, M. I.'A stochastic multidomain approach for mid-frequency vibration problems', Swansea University. ( abstractfull paper )

USDM2-Tuesday 18 September 2018

13:35 Najera-Flores, D. A., and Brink, A. R., 'Efficient random vibration analysis of nonlinear systems with long short-term memory networks for uncertainty quantification', Sandia National Laboratories. ( abstractfull paper )
14:00 Blondeel, P., Robbe, P., Van hoorickx, C., Lombaert, G., and Vandewalle, S., 'The multilevel monte carlo method applied to structural engineering problems with uncertainty in the young's modulus', KU Leuven. ( abstract,full paper )
14:25 Fabro, A., and Mencik, J.-M., 'On the non-parametric modelling of uncertain elastic joints in periodic structures', University of Brasilia. ( abstractfull paper )
14:50 Reyes, J., Soize, C., Gagliardini, L., and Brogna, G., 'Vehicle model likelihood computation using a probabilistic complex frf matrix statistical reduction', MSME / PSA. ( abstractfull paper )

USDM3-Tuesday 18 September 2018

15:40 Faes, M., and Moens, D., 'High dimensional dependence via pair constructions for interval finite models', KU Leuven. ( abstractfull paper )
16:05 Mäck, M., and Hanss, M., 'A multi-fidelity approach for possibilistic uncertainty analysis', Universtity of Stuttgart. ( abstractfull paper )
16:30 Giunta, F., Muscolino, G., and Sofi, A., 'A sensitivity-based approach for the dynamic analysis of structures with uncertain-but-bounded parameters', University "Mediterranea" of Reggio Calabria. ( abstractfull paper )
16:55 Ghosh Dastidar, S., Faes, M., and Moens, D., 'A twin-mesh approach for random field analysis in highdimensional dynamic models', KU Leuven. ( abstractfull paper )

USD – uncertainty identification and quantification

USDUIQ-Monday 17 September 2018

13:25 Hose, D., and Hanss, M., 'On inverse fuzzy arithmetical problems in uncertainty analysis', University of Stuttgart. ( abstractfull paper )
13:50 Bi, S., Broggi, M., Beer, M., and Zhang, Y., 'Bayesian model updating using stochastic distances as uncertainty quantification metrics', Leibniz University Hannover. ( abstractfull paper )
14:15 Jalali, H., Haddad Khodaparast, H., and Friswell, M. I., 'Identification of a stochastic model for bolted joints', Swansea University. ( abstractfull paper )
14:40 Rogers, T. J., Worden, K., Manson, G., Tygesen, U. T., and Cross, E. J., 'A bayesian filtering approach to operational modal analysis with recovery of forcing signals', University of Sheffield. ( abstractfull paper )
15:05 Ricardo, D., and Silva, T. A. N.'Fuzzy model updating: covariance updating to estimate the interval radii of the updated parameters', NOVA UNIDEMI - Universidade NOVA de Lisboa. ( abstractfull paper )
15:30 Imholz, M., Vandepitte, D., and Moens, D., 'Bayesian estimation of interval bounds based on limited data', KU Leuven. ( abstractfull paper )

Vehicle noise and vibration (NVH)

NVH1-Monday 17 September 2018

13:25 Benzoni, L., Braghin, F., Marchetti, L., and Tramaglia, F., 'Uneven vane spacing design for reducing noise emission in a variable displacement vane oil pump', Politecnico di Milano. ( abstractfull paper )
13:50 Scholz, A., Marinova, P., Schmidt, N., Vieker, D., Orlando, S., and Van Genechten, B., 'Estimation of steering gear running noise using simulated excitations and measured noise transfer functions', ZF Friedrichshafen AG. (abstractfull paper )
14:15 De Gregoriis, D., Naets, F., Kindt, P., and Desmet, W., 'Towards a high-fidelity simulation approach for predicting coarse road dynamic tire/road contact forces using an ale-formulation and a-priori nonlinear hyper-reduction', Goodyear SA Luxembourg / KU Leuven. ( abstractfull paper )
14:40 Furlich, J. E., Blough, J., and Robinette, D. L., 'Analysis of experimental mt clunk with stft and cwt to observe mode participation and reduction', Michigan Technological University. ( abstractfull paper )
15:05 Fernandes, J. C. M., and Silveira, M., 'Optimising geometry and asymmetrical damping ratio to reduce vehicle vertical acceleration under stochastic road profile', São Paulo State University (UNESP), School of Engineering, Bauru. ( abstractfull paper )

NVH2-Tuesday 18 September 2018

13:35 Ullmann, R., Sicklinger, S., and Müller, G., 'Validation experiment for structural power', BMW AG / Technical University of Munich. ( abstractfull paper )
14:00 Gomez, E. R., Arteaga, I. L., and Kari, L., 'Multiple-order excitation and response of centrifugal pendulum vibration absorbers', Scania AB / KTH Royal Institute of Technology. ( abstractfull paper )
14:25 Sicklinger, S., and Ullmann, R., 'Structural power as an acoustic design criteria for the early phase of product design', BMW Research. ( abstractfull paper )
14:50 Barbeau, R., Weisser, T., Dupuis, R., Aubry, E., and Baudu, S., 'A robust design approach to optimize the vibrational comfort of automotive seats', Université de Haute-Alsace. ( abstractfull paper )
15:15 Stelzer, R., Delpero, T., and D'Amico, R., 'Assessment of the potential of trim parts to reduce structure-borne noise in the interior of vehicles', Autoneum Management AG. ( abstractfull paper )

NVH3-Wednesday 19 September 2018

08:30 Gaudin, A.'Active damping of automotive driveline oscillations and its interactions with engine suspension', Groupe PSA. ( abstractfull paper )
08:55 Mollet, Y., Chauvicourt, F., Pelletier, J., Sarrazin, M., Faria, C. T., Van der Auweraer, H., and Gyselinck, J. C., 'Investigation of the influence of dc-bus voltage on switched reluctance machines regarding noise and vibrations', Siemens Industry Software NV. ( abstractfull paper )
09:20 Le Magueresse, T., Minck, O., and Antoni, J., 'Experimental applications of bayesian focusing in an industrial context', MicrodB. ( abstractfull paper )

NVH4-Wednesday 19 September 2018

11:00 Zacharczuk, M., Stump, O., and Hetzler, H., 'Mor for friction induced self-excitation in jointed structures based on substructuring for nonlinear interfaces – a review of methods with application to brake squeal', Daimler AG. ( abstractfull paper )
11:25 Komada, M., Matsumura, Y., Kido, I., Nakatsugawa, E., and Ozaki, H., 'Real-time assignment method of resonance frequency by change of coupling stiffness for improving road induced noise', Toyota Motor Corporation, Vehicle Engineering Development Div. Advanced R&D and Engineering Company. ( abstractfull paper )
11:50 Bayani, M., Székely, A. P., Al Hanna, N., Viktorsson, H., Wickman, C., and Söderberg, R., 'Nonlinear modelling and simulation of impact events and validation with physical data', Chalmers University of Technology / Volvo Car Corporation. ( abstractfull paper )

Vibro-acoustic modelling and prediction

VAM-Wednesday 19 September 2018

13:35 Hook, K., Cheer, J., and Daley, S., 'A parametric study and modal analysis of an acoustic black hole on a beam', The University of Southampton. ( abstractfull paper )
14:00 Decraene, C., Dijckmans, A., and Reynders, E., 'Robust sound transmission modelling of finite-sized layered walls and floors', KU Leuven. ( abstractfull paper )
14:25 Van Antwerpen, B., Corveleyn, S., Lielens, G., and Van den Nieuwenhof, B., 'Validity of the transfer matrix method for modeling trim components in vibro-acoustic applications', Free Field Technologies, MSC Software Company. ( abstractfull paper )
14:50 Piana, E. A., Carlsson, U., and Feng, L., 'Determination and optimisation of the sound reduction index of ship bulkheads through the wave propagation approach', University of Brescia. ( abstractfull paper )
15:15 Hallez, R., Colangeli, C., Cuenca, J., Di Lorenzo, E., Musella, U., and Debille, J., 'Assessment of the vibro-acoustic performance of an all-electric light aircraft based on ground and in-flight measurements', Siemens Industry Software NV. ( abstractfull paper )

Vibro-acoustic of periodic media

VIPER1-Monday 17 September 2018

15:30 Campana, M.-A., Scarpa, F., Ouisse, M., and Sadoulet-Reboul, E., 'Wave propagation in an auxetic core embedding resonators', University of Bristol. ( abstractfull paper )
15:55 Tufano, G., Droz, C., Bareille, O., Zine, A.-M., Pluymers, B., Desmet, W., and Ichchou, M., 'Wavenumber identification technique for axial-symmetric structures', Ecole Centrale de Lyon / KU Leuven. ( abstractfull paper )
16:20 Ahsani, S., Boukadia, R. F., Droz, C., Claeys, C., and Deckers, E., 'Diffusion based homogenization method for one dimensional locally resonant system', KU Leuven. ( abstractfull paper )
16:45 Guenfoud, N., Droz, C., Ichchou, M., Bareille, O., Pluymers, B., and Deckers, E., 'Modeling and experimental measurements of the sound transmission loss for multi-layer core topology systems', Ecole Centrale de Lyon. (abstractfull paper )
17:10 Boukadia, R. F., Claeys, C., Droz, C., Ichchou, M., and Deckers, E., 'Model order reduction in unit cell modeling and its application to complex structures', KU Leuven. ( abstractfull paper )
17:35 Timorian, S., Franco, F., Ouisse, M., De Rosa, S., and Bouhaddi, N., 'Investigation for the analysis of the vibrations of quasi-periodic structures', VIPER. ( abstractfull paper )
18:00 Bourgana, T., Boukadia, R. F., Jonckheere, S., Claeys, C., Chevallier, G., Ouisse, M., and Deckers, E., 'Inverse characterization method of viscoelastic materials using dispersion analysis', . ( abstractfull paper )

VIPER2-Tuesday 18 September 2018

10:10 Palumbo, R., Ivanov, D., Droz, C., Bareille, O., Ichchou, M., and Scarpa, F., 'Design of a multi-scale reinforced sandwich panel with enhanced vibroacoustics performances', ACCIS, University of Bristol. ( abstractfull paper)
10:35 Errico, F., Ichchou, M., De Rosa, S., Bareille, O., and Franco, F., 'A load approximation for the vibroacoustic analysis of periodic structures to fluid excitation', Ecole Centrale Lyon. ( abstractfull paper )
11:00 Singh, R. P., Droz, C., De Rosa, S., Franco, F., Bareille, O., and Ichchou, M., 'A study of structured uncertainties in wave characteristic of one-dimensional periodic structures', University of Naples Federico II. ( abstractfull paper )
11:25 Magliacano, D., Ouisse, M., Khelif, A., De Rosa, S., Franco, F., and Atalla, N., 'Computation of wave dispersion characteristics in periodic porous materials modeled as equivalent fluids', Université de Franche-Comté. (abstractfull paper )
11:50 Del Broccolo, S., Ouisse, M., Foltete, E., and Scarpa, F., 'Interlocked hybrid-cell kirigami inspired cellular structures and their vibroacoustic performance', FEMTO-ST Institute UBFC. ( abstractfull paper )

Wind turbine dynamics

WIND-Wednesday 19 September 2018

10:10 Luczak, M. M., Peeters, B., Manzato, S., Di Lorenzo, E., Csurcsia, P. Z., Reck-Nielsen, K., Berring, P., Haselbach, P. U., Branner, K., and Ruffini, V., 'Integrated dynamic testing and analysis approach for model validation of an innovative wind turbine blade design', Technical University of Denmark. ( abstractfull paper )
10:35 Garcia, D., Tcherniak, D., and Branner, K., 'Virtual prototyping of an actuator-based structural health monitoring system of wind turbine blades', Univeristy of Strathclyde. ( abstractfull paper )
11:00 Castellani, F., Astolfi, D., Becchetti, M., and Berno, F., 'Experimental damage detection on small wind turbines through vibration and acoustic analysis', University of Perugia. ( abstractfull paper )
11:25 Gayatri, C. V. H., and Sekhar, A. S.'Gear tooth crack detection in a wind turbine drive train', IIT Madras. ( abstractfull paper )


POS1-Monday 17 September 2018

13:25 van Dijk, C. C.'Optimization of acoustic doors using laser-spectro-vibrometry and finite element methods', Alara-Lukagro. ( abstractfull paper )
13:25 Karlos, A., Elliott, S. J., and Cheer, J., 'Reflections from elastic wedges of different thickness profiles', University of Southampton. ( abstractfull paper )
13:25 Guimarães, G. P., and Ribeiro, I. T., 'Experimental investigation on the acoustic impedance of helmholtz resonators using an accelerometer for the volume velocity source', UFOP - Federal University of Ouro Preto. ( abstract,full paper )
13:25 Marinus, B. G., and Harri, K., 'Prediction of outdoor sound propagation from firearms shooting ranges: a comparison', RMA - Royal Military Academy. ( abstractfull paper )
13:25 Pendse, V., Ghazwani, M., and Naghshineh, K.'Investigation of the effect of stamping process on dimpled beams', Western Michigan University. ( abstractfull paper )
13:25 Antoniadis, I., and Paradeisiotis, A.'A periodic acoustic meta-material concept incorporating negative stiffness elements for low-frequency acoustic insulation/ absorption', National Technical University of Athens. (abstractfull paper )
13:25 Brown, A. K. M., Hill, T. L., Neild, S., and Tartaruga, I., 'Investigating a mechanism which causes divergence of a resonant decay from the backbone curve', University of Bristol. ( abstractfull paper )
13:25 Carvalho de Sousa, A., Bartczak Camargo, M., Lenzi, A., Claeys, C., and Deckers, E., 'Optimization and testing of periodic and locally resonant dead-end pores for sound absorption in frequencies below 1000 hz', KU Leuven. ( abstractfull paper )
13:25 Lukeš, V., and Rohan, E., 'Optimization of perforated plates in interaction with acoustic waves', University of West Bohemia. ( abstractfull paper )
13:25 Zielinski, T. G., Galland, M.-A., and Deckers, E., 'Influencing the wave-attenuating coupling of solid and fluid phases in poroelastic layers using piezoelectric inclusions and locally added masses', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )
13:25 Du, B., Liu, X., Wu, X., and Wang, Z.'Microphone random arrangements for near-field acoustic holography based on compressive sampling', Kunming University of Science and Technology. ( abstractfull paper )
13:25 Sangiuliano, L., Deckers, E., and Claeys, C., 'Control of edge modes in finite vibro-acoustic resonant metamaterials', KU Leuven. ( abstractfull paper )
13:25 Van Belle, L., Claeys, C., Deckers, E., and Desmet, W., 'Influence of damping on the sound insulation of infinite and finite locally resonant metamaterial plates', KU Leuven. ( abstractfull paper )
13:25 Elliott, A. J., Tartaruga, I., Cammarano, A., Dobson, P. S., and Neild, S., 'Manuscript preparation instructions', University of Glasgow. ( abstractfull paper )
13:25 Rodrigues, I. F., and Lopez Arteaga, I., 'Axial propagation of flow-induced vibrations in thick walled pipes and hoses', Eindhoven University of Technology. ( abstractfull paper )
13:25 Cool, V., Naets, F., Rottiers, W., and Desmet, W., 'Parametric model order reduction for efficient frequency response evaluation', KU Leuven. ( abstractfull paper , video pitch )
13:25 Tomita, S., Nakano, S., and Omote, R., 'Formation mechanisms of vibration bandgaps based on block diagrams of wave transmission', Toyota Central R&D Labs., Inc.. ( abstractfull paper )
13:25 Chen, J., Melling, J., and Joseph, P., 'Experimental evaluation of a new two-microphone method for the mode detection and radiation of broadband noise in ducts', University of Leicester. ( abstractfull paper )
13:25 Clasing Villanueva, M. E. S., Claeys, C., Rocha de Melo Filho, N. G., Deckers, E., Geurts, K., Van de Weyenberg, I., Campestrini, P., Pluymers, B., and Desmet, W., 'Design tool for realisable vibro-acoustic metamaterials based on their nvh performance', KU Leuven. ( abstractfull paper )
13:25 Mezzani, F., Coppo, F., and Carcaterra, A., 'Long-range coupling of waveguides', Sapienza University of Rome. ( abstractfull paper )
13:25 roveri, n., pensalfini, s., and carcaterra, a., 'Small-world based interactions in elastic metamaterials', University of Rome, “La Sapienza”. ( abstractfull paper , video pitch )
13:25 Balla, V. K., Greco, F., Deckers, E., Pluymers, B., Desmet, W., and Vadakkel, G., 'Damping enhancement of sheet-metal components through shot peening process to improve vibro-acoustic performance', KU Leuven. (abstractfull paper )
13:25 Coppo, F., Rezaei, A. S., Mezzani, F., Pensalfini, S., and Carcaterra, A., 'Waves path in an elastic membrane with selective nonlocality', Sapienza University of Rome. ( abstractfull paper )
13:25 Zhang, T., Barthorpe, R. J., and Worden, K.'On narx models using treed gaussian processes', University of Sheffield. ( abstractfull paper )
13:25 Dowling, L., Mao, H., Flanagan, L., Kennedy, J., Rice, H., Trimble, D., Goransson, P., and Cuenca, J., 'A combined design-manufacturing-testing investigation of micro- to macro-scale tailoring of open poroelastic materials based on perturbed kelvin cell micro-geometries', KTH Royal Institute of Technology. ( abstractfull paper , video pitch )

POS2-Tuesday 18 September 2018

08:30 Jin, C., and Zhang, T., 'Composite phononic crystals modelling and its application in vehicle noise control', Tongji University. ( abstractfull paper )
08:30 Mrak, B., Adduci, R., Weckx, S., Driesen, W., and Desmet, W., 'Novel phase-bound magnetic vibration absorber for improved nvh performance of a wind turbine gearbox', KU Leuven / Flanders Make. ( abstractfull paper )
08:30 Chauvicourt, F., Faria, C. T., Gyselinck, J. C., van der Auweraer, H., and Desmet, W., 'Alternative lamination stacking technique of stator cores for improved structural damping of electric machines', Siemens Industry Software NV. ( abstractfull paper )
08:30 Gordon, V., Pilipenko, O., and Trifonov, V., 'Dynamic effects at sudden structural rebuilding of the “beam-foundation” system', Orel State University. ( abstractfull paper )
08:30 Scussel, O., Brennan, M. J., Muggleton, J. M., de Almeida, F. C. L., and Paschoalini, A. T., 'Model-based optimization of axisymmetric wave motion in buried plastic water distribution pipes', UNESP - São Paulo State University. ( abstractfull paper , video pitch )
08:30 Yuan, H., Li, Y., Jiang, J. Z., and Mellor, P. H., 'Mechatronic suspension design for vehicle dynamic performance enhancement', University of Bristol. ( abstractfull paper )
08:30 D'Avillez, J.'Examining the impact of critical building substructural elements on the building’s rail induced vibration responsiveness', WSP. ( abstractfull paper , video pitch )
08:30 Shi, W., Liu, G., Gao, C., Shi, H., and Chen, Z., 'Test and improvement of drive axle whine for a light bus', School of Automotive Engineering,Jilin University. ( abstractfull paper )
08:30 Alkam, F., and Lahmer, T., 'On the quality of identified parameters of prestressed concrete catenary poles in existence of uncertainty using experimental measurements and different optimization methods', Bauhaus University Weimar. ( abstractfull paper )
08:30 Kanarachos, S., Kalliris, M., Blundell, M., and Kotsakis, R., 'Speed-dependent wet road surface detection using acoustic measurements, octave-band frequency analysis and support vector machines', Coventry University. (abstractfull paper , video pitch )
08:30 Martínez-Rodrigo, M. D., Moliner, E., Romero Rodóñez, A., and Galvín Barrera, P., 'Resonance and cancellation mechanisms in existing high-speed railway bridges with an orthotropic plate behaviour', Universitat Jaume I. ( abstractfull paper )
08:30 Shakya, P., Darpe, A. K., and Kulkarni, M. S., 'A comparison of the prognostic approaches for rolling element bearings', IIT Madras. ( abstractfull paper )
08:30 Li, Y.-Y., Zhang, S. Y., Jiang, J. Z., Neild, S., and Ward, I., 'Passive vibration control of offshore wind turbines using structure-immittance approach', University of Bristol. ( abstractfull paper )
08:30 Lancini, M., Bodini, I., Petrogalli, C., Provezza, L., Faccoli, M., Sansoni, G., Solazzi, L., and Mazzù, A., 'Damage phenomena characterization in rcf tests using image analysis and vibration-based machine learning', University of Brescia. ( abstractfull paper , video pitch )
08:30 Green, P. L., Chodora, E., and Atamturktur, S., 'On the identification of model error through observations of time-varying parameters', University of Liverpool. ( abstractfull paper )
08:30 Bigelow, H., Hoffmeister, B., and Feldmann, M., 'Simplified design of filler beam railway bridges for high-speed traffic', RWTH Aachen University. ( abstractfull paper )
08:30 Lizoul, K., Andre, H., and Guillet, F., 'Improvement of instantaneous angular speed estimation based on frequency demodulation method under non stationary conditions', Laboratoire d'Analyse des Signaux et Processus Industriels, IUT de Roanne. ( abstractfull paper , video pitch )
08:30 Jamia, N., Friswell, M. I., El-Borgi, S., and Rajendran, P., 'Blade tip timing based condition monitoring of bladed disks in rotating machines', Swansea University. ( abstractfull paper )
08:30 Chen, Z., Li, W., and Gryllias, K., 'Gearbox fault diagnosis based on convolutional neural networks', KU Leuven. ( abstractfull paper )
08:30 Milana, S., Roveri, N., Carcaterra, A., and Culla, A., 'Continuous wavelet transform for structural health monitoring of a pipe', Sapienza University of Rome. ( abstractfull paper )
08:30 Noppe, N., Tatsis, K., Chatzi, E. N., Devriendt, C., and Weijtjens, W., 'Fatigue stress estimation of offshore wind turbine using a kalman filter in combination with accelerometers', Vrije Universiteit Brussel. ( abstractfull paper )
08:30 Kruczek, P., Wodecki, J., Wyłomańska, A., Zimroz, R., and Gryllias, K., 'Multi-fault diagnosis based on bi-frequency cyclostationary maps clustering', KGHM CUPRUM. ( abstractfull paper )

POS3-Tuesday 18 September 2018

13:35 Kehr-Candille, V.'Identification of hysteretic systems for damping modelization', ONERA - Office National d'Etudes et de Recherches Aérospatiales. ( abstractfull paper )
13:35 Wasenczuk, A., Corni, I., and Symonds, N., 'Energy in random vibration – reduce, resist, recycle', Perpetuum. ( abstractfull paper )
13:35 Nerubenko, G., Bograd, A., and Kolomier, P., 'Tuned mass dampers as energy harvesters for railways', NERMAR Limited. ( abstractfull paper )
13:35 Nascimento, L. A., Rodrigues, G. K., and de Oliveira, L.'Revisited impedance tube for standard and metamaterial testing', EESC, University of São Paulo. ( abstractfull paper )
13:35 Thierry, V., and Chronopoulos, D., 'The effect of the weaving architecture of periodic composite structures on structural damping', University of Nottingham. ( abstractfull paper )
13:35 Park, Y. J., Bartel, T., Röglin, T., Stoll, G., Zech, P., Plöger, D. F., and Rinderknecht, S., 'Simulink-pspice co-simulation of power amplifier for driving piezoelectric actuators', Fraunhofer Institute for Structural Durability and System Reliability. ( abstractfull paper )
13:35 Papaioannou, G., and Koulocheris, D., 'Optimization of skyhook control strategies and an alternative approach for the operational conditions', National Technical University of Athens. ( abstractfull paper )
13:35 Paradeisiotis, A., Yiakopoulos, C., and Antoniadis, I., 'A compact and light acoustic transducer using dielectric elastomer films for low frequency active noise cancellation', National Technical University of Athens. ( abstract,full paper )
13:35 Mikułowski, G.'Semi-active damping of forced vibrations by means of pneumatic supports', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )
13:35 Friis, T., Katsanos, E. I., Tarpø, M., Amador, S., and Brincker, R., 'Output-only damping estimation of friction systems in ambient vibrations', Technical University of Denmark. ( abstractfull paper )
13:35 Cumbo, R., Tamarozzi, T., Janssens, K., and Desmet, W., 'Investigation of virtual sensing techniques on a rear twistbeam suspension by performing multiple-input/state estimation', Siemens Industry Software NV. ( abstract,full paper )
13:35 Mathis, A. T., Brink, A. R., and Quinn, D. D.'Implementation and comparison of advanced friction representations within finite element models', The University of Akron. ( abstractfull paper )
13:35 Zhang, S., and Sheng, X., 'Analysis of sound transmission loss of a rectangular plate with acoustic treatments', Southwest Jiaotong University. ( abstractfull paper )
13:35 Wang, B., and Kari, L., 'Modeling the the amplitude and magnetic dependency to the vibration isolation effect for magneto-sensitive rubber isolation system by assessing the energy flow', KTH Royal Institute of Technology. (abstractfull paper )
13:35 Millitzer, J., Rohlfing, J., Mees, V., and Döring, A., 'Simulation of active control systems considering different levels of detail in the signal processing chain', Fraunhofer Institute for Structural Durability and System Reliability. ( abstractfull paper )
13:35 Williams, D. J., Haddad Khodaparast, H., and Yang, C., 'A practical approach of active vibration control with the use of piezoelectric actuators', Swansea University. ( abstractfull paper )
13:35 Ertarla, S., Karadag, C. V., and Topaloglu, N.'Analytical modeling of a cantilever beam type vibration energy harvester with a lever mechanism', Yeditepe University. ( abstractfull paper )
13:35 Costa, N. C., Camargo, E. A., and Pirk, R., 'Identification and comparison of modal parameter in a structure during the vibration test using operational modal analysis', Brüel & Kjær Sound & Vibration Measurement A/S. (abstractfull paper )
13:35 Šika, Z., Hromčík, M., Svoboda, F., Volech, J., Zavřel, J., and Karlíček, J., 'Decentralized and distributed mimo h-infinity robust control of vibration suppression of planar structures', Czech Technical University in Prague, Faculty of Mechanical Engineering. ( abstractfull paper )
13:35 Orlowska, A., Graczykowski, C., and Galezia, A., 'Numerical and experimental investigation of prestress effect on natural frequencies of composite beams', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )
13:35 Lopez, C., Boucher, M., Van Doninck, B., Maurin, F., Iliopoulou, V., Stroobants, J., Jonckheere, S., Deckers, E., van Poppel, S., and Pluymers, B., 'Multi-attribute evaluation of concept variants for lightweight structures', Flanders Make. ( abstractfull paper )
13:35 Graczykowski, C., and Faraj, R., 'Self-adaptive fluid-based absorbers for impact mitigation and vibration damping', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )
13:35 Xia, Y., Zhang, R., Friswell, M. I., and Cao, Y., 'Suppression of the wind-induced vibration of high-rise buildings with inerter systems', Swansea University. ( abstractfull paper )
13:35 Paifelman, E., Pepe, G., La Gala, F., and Carcaterra, A., 'Control of fluctuations of a tethered unmanned-underwater-vehicle', Sapienza University of Rome. ( abstractfull paper )
13:35 Beneš, P., Neusser, Z., Šika, Z., Valášek, M., and Zavřel, J.'Wave-based control of a planar mechanical structure by piezoelectric actuators', Czech Technical University in Prague, Faculty of Mechanical Engineering. (abstractfull paper )

POS4-Wednesday 19 September 2018

08:30 Norambuena, M., Winter, R., and Biedermann, J., 'Accurate structural excitation through adaptive control', DLR - German Aerospace Center. ( abstractfull paper , video pitch )
08:30 Mora, A., Bianchi, G., and Leonesio, M., 'Dynamic optimization of an electro-spindle for robotic machining', STIIMA-CNR - Istituto di Tecnologie Industriali e Automazione CNR. ( abstractfull paper )
08:30 González, D., and López-Valcarce, R., 'Spectral and statistical evaluation of the properties of the vibration measured at the base of an automotive seat for non-gaussian random noise synthesis', CTAG - Automotive Technology Centre of Galicia. ( abstractfull paper )
08:30 Kirchner, M., Croes, J., Cosco, F., Pluymers, B., and Desmet, W., 'Compressive sensing-moving horizon estimator for periodic loads: experimental validation in structural dynamics with video-based measurements', KU Leuven. ( abstractfull paper )
08:30 Vishwanathan, A., and Vio, G. A., 'On the efficacy of random matrix theory to quantify uncertainty in topology optimisation', University of Sydney. ( abstractfull paper )
08:30 Ding, B., Watchi, J., and Collette, C., 'Development of a high q factor pendulum for optical inertial sensor', Université Libre de Bruxelles. ( abstractfull paper )
08:30 Pierro, E., Bottiglione, F., and Carbone, G., 'Experimental and theoretical characterization of a dafm cantilever dynamics', Università degli Studi della Basilicata. ( abstractfull paper )
08:30 Pires, F., Vanlanduit, S., and Dirckx, J., 'Structural intensity on irregular shells', University of Antwerp. ( abstractfull paper )
08:30 Ondra, V., Dibble, R. P., and Titurus, B., 'Towards an application of an active tendon in rotorcraft: a numerical and experimental study of coupled bending-torsion vibration of a beam-tendon system', University of Bristol. (abstractfull paper )
08:30 de Gooijer, B. M., Hazrati-Marangalou, J., Geijselaers, H. J. M., and van den Boogaard, A. H., 'An efficient strategy to describe the propagation of variation through multi-stage metal forming processes', University of Twente. ( abstractfull paper )
08:30 Yu, L., Liu, L., and Kang, J., 'Output-only modal parameter estimator of time-varying structures based on maximum correntropy criterion and kernelized tarma model', Beijing Institute of Technology. ( abstractfull paper )
08:30 Chi, X., Di Maio, D., and Lieven, N. A. J., 'Dynamic response and energy loss in jointed structures using finite element methods: application to an aero-engine casing assembly', University of Bristol. ( abstractfull paper )
08:30 Sharma, N., and Modak, S. V., 'Robust identification of parameters uncertainty in stochastic finite element model updating', IIT Delhi. ( abstractfull paper )
08:30 Hoffait, S., Moschini, S., Ligot, J., and Simon, D., 'Modal analysis tools at v2i: improved pre- and post-processing with modified p-lscf algorithm', V2i. ( abstractfull paper )
08:30 Dogančić, B., Alujević, N., Jokić, M., and Wolf, H., 'Unstructured uncertainty modeling for coupled vibration systems', Faculty of Mechanical Engineering and Naval Architecture. ( abstractfull paper )
08:30 Zhu, M., Zhang, S. Y., Jiang, J. Z., Macdonald, J., and Neild, S., 'Enhancing the dynamic performance of a pantograph-catenary system via inerter-based damping technology', University of Bristol. ( abstractfull paper )
08:30 Ngamkhanong, C., Goto, K., and Kaewunruen, S., 'Sensitivity of dynamic responses of railway prestressed concrete sleepers with under sleeper pads to impact energy', University of Birmingham. ( abstractfull paper )
08:30 Borges, R. A., Rodovalho, L. F. F., and Rade, D. A.'Stochastic analysis of the natural frequencies of rectangular plates under random temperature distributions', Aeronautics Institute of Technology. ( abstractfull paper )
08:30 Magyar, B., Csernak, G., Zana, R., Wohlfart, R., and Stepan, G., 'Experimental and numerical modal analysis of dry frictioninduced contact damping in assembled structures', Budapest University of Technology and Economics. ( abstractfull paper , video pitch )
08:30 Brunetti, J., D'Ambrogio, W., Fregolent, A., and Lacerra, G., 'Transmission of vibrations between towed and towing agricultural machines', Sapienza University of Rome. ( abstractfull paper )
08:30 Bonisoli, E., Lisitano, D., and Dimauro, L., 'Experimental and numerical mode shape tracing from components to whole motorbike chassis', Politecnico di Torino. ( abstractfull paper )
08:30 Greco, F., Deckers, E., Stroobants, J., Van Poppel, S., Maurin, F., and Desmet, W., 'Accurate product model development for the simulation of the dynamic behaviour of deep drawn components', KU Leuven. ( abstractfull paper )
08:30 Tonazzi, D., Massi, F., Baillet, L., Salipante, M., and Berthier, Y., 'Estimation of normal contact stiffness for different contact pairs: experiments and numerical approach', Sapienza University of Rome. ( abstractfull paper )
08:30 Wolejsza, Z., Holnicki-Szulc, J., Graczykowski, C., Hinc, K., Faraj, R., Kowalski, T., Mikułowski, G., Kazmierczak, K., Wiszowaty, R., and Pawlowski, P.'Dynamics and control of adaptive airbags for uav impact protection', Institute of Fundamental Technological Research, Polish Academy of Sciences. ( abstractfull paper )