• Approaches and applications in monitoring, diagnostics & prognostics
• Case studies in noise and vibration engineering
• Experimental and hybrid methods for dynamic identification and testing
• Inverse methods for dynamic material or component characterization
• NVH control solutions
• Non-linear dynamics
• Novel NVH applications in machines and vehicles
• Novel applications in rotating system dynamics
• Simulation and Digital Twin approaches in mechatronic and multibody dynamics
• Simulation and Digital Twin approaches in vibro-acoustics
• Uncertainty in structural and system dynamics

Approaches and applications in monitoring, diagnostics & prognostics

• Pancaldi, F., D'Elia, G., and Cocconcelli, M., 'Harmonic-percussive source separation for fault detection in ball bearings characterized by cyclic polynomial motion law', University of Modena and Reggio Emilia.
• Smith, W., Borghesani, P., Randall, R., Antoni, J., El Badaoui, M., and Peng, Z., 'Bearing diagnostics in high speed applications', University of New South Wales.
• Zhu, R., Maele, D. V., Poletto, J. C., Baets, P. D., and Gryllias, K., 'Development and evaluation of vibration indicators for gear pitting detection', Flanders Make @ KU Leuven.
• Maes, K., Verbist, K., Berten, K., Reynders, E., and Lombaert, G., 'The use of strain-based unit influence lines for structural health monitoring of railway bridges', KU Leuven.
• Antoni, J., 'Signal processing in mechanical engineering: a historical perspective and current challenges', INSA Lyon.
• mostafavi, a., and Friedmann, A., 'Bayesian convolutional neural network models for uncertainty-aware bearing fault detection', Fraunhofer LBF.
• Marx, D., Kunte, D., Cornelis, B., and Gryllias, K., 'A method for adding domain knowledge to semi-supervised fault detection using signal processing gradients', Flanders Make @ KU Leuven.
• Bittner, W., Slimak, T., and Jung, H., 'Enhancing dynamic analysis of mechanical systems using dynamic gaussian splatting and motion magnification', Technical University of Munich.
• Case, J. A., and Barnard, A., 'Impulsive event detection: marine and lacustrine ice fracturing', Penn State.
• Chaudhary, B., and Tandel, B. N., 'A gis-based approach for mapping of urban road traffic noise', Sardar Vallabhbhai National Institute of Technology, Surat.
• Dardeno, T. A., Bull, L. A., Dervilis, N., and Worden, K., 'When does a bridge become an aeroplane?', The University of Sheffield.
• Erdélyi, J. A., Farkas, M., and Fukker, B., 'Self-training anomaly detection in vibrational and acoustic data', Robert Bosch Kft..
• Janot, D., Vieux-Champagne, F., Gueguen, P., and Boudaud, C., 'Monitoring and modeling of the vibratory behavior of high-rise timber building', Laboratoire 3SR.
• Jensen, A. M. D., Schoerghofer-Queiroz, A., Ulriksen, M. D., Tcherniak, D., Damkilde, L., Talasila, P., Larsen, P. G., and Abbiati, G., 'Digital twin as a service for damage prognosis of offshore wind turbine foundations', Aarhus University.
• Tsialiamanis, G., Worden, K., Dervilis, N., and Hughes, A. J., 'Towards an active-learning approach to resource allocation for population-based damage prognosis', University of Sheffield.
• Brunnmayr, F., and Mikota, G., 'Theoretical and experimental modal analysis applied to the arterial system of the human body', Johannes Kepler University.
• Candelaresi, D., Kosova, G., Annessi, A., Di Lorenzo, E., Martarelli, M., and Castellini, P., 'Cook’s distance-based regression to enhance clustering of metal additive manufactured components through a resonance testing system', Università Politecnica delle Marche, Siemens Digital Industries Software.
• Chu, Z., Luo, M., Guillet, F., and Andre, H., 'A novel simulation method for encoder signals in ias monitoring applications', Université Jean Monnet.
• Deonarain, G., Blough, J., and Labyak, D., 'Effect of testing and analysis parameters on efficiency and sensitivity of fdac for defect detection', Michigan Technological University.
• Kent, C., O'Higgins, C., Hester, D., Taylor, S., and Woods, R., 'Using readily available shm data to gain insights into the dynamic behaviour of bridges', Queen's University Belfast.
• Lucchese, A., D'Elia, G., Rubini, R., and Cocconcelli, M., 'Exploiting non-gaussian distributions in hidden markov model for bearing prognostics', University of Modena and Reggio Emilia.
• Ch. Ullrich, E., Döbler, D., Schmidt, P., and Canberk, C., 'Ar-based setup of vibration sensors in test rigs', GFaI e.V..
• El Amli, A., El Yousfi, B., Soualhi, A., and Guillet, F., 'Estimation of gear mesh stiffness in spur gears through finite element model and analytical approach', Jean Monnet university.
• Vrtač, T., Ocepek, D., Boltežar, M., and Čepon, G., 'A hybrid modeling strategy for training data generation in machine learning-based structural health monitoring', University of Ljubljana.
• Zulawinski, W., Kuzio, D., Zimroz, R., and Wylomanska, A., 'New health indicator based on robust spectral coherence maps for prognosis of degradation process in highly impulsive environment', Wroclaw University of Science and Technology.
• Lakra, A. M., and Radhika, B., 'Vibration based identification of breathing cracks using time frequency analysis', NIT Calicut.
• Papatheou, E., Manson, G., Battu, R. S., Worden, K., and Tsialiamanis, G., 'On the use of synthetic data for shm: a short investigation on a laboratory structure', University of Exeter.
• Martinelli, C., Soderqvist, A., and Cammarano, A., 'Using transfer learning in physics informed neural networks for online structural health monitoring', University of Strathclyde.
• Kullaa, J., 'Issues in damage detection using autocovariance functions', Metropolia University of Applied Sciences.
• Konstantinou, X., Kritikakos, K., Lee, C. F., Sakaris, C. S., Sakellariou, J. S., Schlanbusch, R., and Ong, M. C., 'Vibration-based structural health monitoring of the mooring lines in a floating offshore wind turbine under varying environmental conditions: nn vs sts based methods', University of Patras.
• Xu, D., Renson, L., and Schwingshackl, C., 'Rotor state monitoring in full-scale industrial turbomachinery using component-based transfer path analysis', Technical University of Munich.
• Marsick, A., Andre, H., Khelf, I., Alloin, L., Leclere, Q., and Antoni, J., 'Pseudo-cyclostationarity of bearing ias signals: cage resynchronisation & synchronous averaging', Laboratoire Vibrations Acoustique.
• Gabrielli, A., Battarra, M., Mucchi, E., and Dalpiaz, G., 'An algorithm based on digital twin sets of solutions for rolling-element bearing prognostics', University of Ferrara.
• Kramti, S. E., André, H., Sayadi, M., and El Badaoui, M., 'Advanced diagnostic methods for bearings in wind turbine: indicators analysis and hyperparameters automation', Université Jean Monnet de Saint-Etienne.
• Reynders, E., Godeau, J., Jovanović, B., van de Velde, M., Vastiau, J., Anastasopoulos, D., Lombaert, G., Caspeele, R., and Van Coile, R., 'Vibration-based condition assessment of concrete beams after fire loading', KU Leuven.
• Mora, B., Basurko, J., and Sabahi, I., 'Force virtual sensing applied to a structure excited by an inertial shaker', Ikerlan S.Coop.
• Kunte, D. S., Marx, D. G., Cornelis, B., Colangeli, C., and Gryllias, K., 'Data-efficient fault detection in vehicle end-of-line testing through fault location-informed classification', Siemens Digital Industries Software NV.
• Xie, K., and Cheng, L.-L., 'A novel phase motion estimation method for structural vibration measurement using two-dimensional hilbert transform', University of Groningen.
• Atashipour, S. R., Rouhollahi, F., and Baqersad, J., 'A non-invasive characterization approach based on digital twin developed using vibration-response', Kettering Unviersity.
• Chiarelli, M., Boes, R. M., Vetsch, D. F., Blommaert, G., Boden, M., and Münch-Alligné, C., 'Identification of natural frequencies of pelton runners during transient operating conditions', HES-SO.
• Delo, G., Surace, C., and Worden, K., 'Knowledge sharing for improving damage identification across a population of heterogeneous laboratory-scale aircraft models', Politecnico di Torino.
• Belur, M. Y., Kefal, A., Fassois, S. D., and Spiliotopoulos, P., 'Robust full-field modal testing method for structural health monitoring of aerostructures under random noise', Sabanci University.
• Deonarain, G., Blough, J., and Labyak, D., 'Defect detection in additively manufactured parts using frequency domain-based correlation criteria', Michigan Technological University.
• Wrzask, K., Tavares, A., Di Lorenzo, E., Branner, K., and Łuczak, M., 'Frequency domain operational modal analysis methods for fatigue damage progression in laboratory tests of wind turbine blade', Gdańsk University of Technology.
• Jedlińska, A., Pisarski, D., Mikułowski, G., Błachowski, B., and Jankowski, Ł., 'Damage detection in a semi-active structural control system based on reinforcement learning', Institute of Fundamental Technological Research Polish Academy of Sciences.
• Guo, Y., and Zhang, J. Y., 'Using rotary encoder signals for rotary vector reducer cycloidal gear fault detection', Kunming University of Science and Technology.
• Maljaars, E., Ravesloot, J., Janssen, A. C. F., Mol, H. A., Murguia, C. G., and Fey, R. H. B., 'On the potential of bearing strain signals for defect severity estimation: modeling and experiments', SKF B.V..
• Trapp, A., Schmidt, D., and Wokusch, S., 'Bispectral analysis of envelopes – a very efficient algorithm for detecting cyclo-stationary components under noise', Siemens Mobility GmbH.
• Gothard, A. T., Wall, C., Henderson, R. C., Anton, S. R., Cardinal, M., and Taggart, A., 'Initial validation of a local structural dynamics monitoring system for smart buildings', Tennessee Technological University.
• Jia, L., Cornelis, B., and Gryllias, K., 'Validation of time series anomaly detection methods for automated detection of measurement anomalies in noise and vibration testing', Siemens Digital Industries Software.
• Karkafi, F., Leiber, M., Leclère, Q., Antoni, J., and El Badaoui, M., 'A two-step synchrosqueezing transform approach mitigating reallocation errors in time-frequency analysis', Safran.
• Neri, P., Paoli, A., Occhipinti, S., Firrone, C., and Botto, D., 'Local digital image correlation algorithms: spatial domain versus frequency domain approach', University of Pisa.
• Roberto Gardel Kurka, P., and Fernandes von Huelsen, L., 'Railway track matching through curvature correlation', Universidade Estadual de Campinas.
• Rosa, S., Martini, A., Rivola, A., and Troncossi, M., 'Condition monitoring of a broaching machine through machine learning classification of a limited dataset vibration signals', University of Bologna.
• Worden, K., Dardeno, T. A., and Hughes, A. J., 'On the topology and geometry of population-based shm', University of Sheffield.
• Kakolyris, G., Fassois, S. D., Kefal, A., and Belur, M. Y., 'Random vibration based robust structural health monitoring for a composite wing-shaped structure under temperature uncertainty: an exploratory study', University of Patras.
• Saramantas, I. E., Sakellariou, J. S., Fassois, S. D., Iliopoulos, I. A., and Serpanos, D. N., 'Sensor fault detection and identification for robust shm in a population of composite aerostructures under varying excitation and temperature', University of Patras.
• Giovannardi, E., Delvecchio, S., Cavina, N., Colangeli, C., Cornelis, B., and Janssens, K., 'Full vehicle nvh end-of-line testing and data-driven fault detection of a high-performance hybrid vehicle front e-axle', Ferrari S.p.A..
• Kirouac, M., Venne, K., and Merkhouf, A., 'Development of a first-level nonintrusive acoustical method for health monitoring of hydroelectric generators', Hydro-Québec.
• Burel, A., Thibault, N., Bourdon, A., Lecouvreur, D., Neveux, N., and Remond, D., 'Angular dynamic model of rotor-bearing-casing interaction for radial contact bearing monitoring', INSA Lyon, Université de Lyon.
• Hosseinli, S. A., Ooijevaar, T., and Gryllias, K., 'Remaining useful life prediction of bearings under steady and varying operating conditions using digital twin-based deep learning', Flanders Make @ KU Leuven.
• Michalak, A., Hebda-Sobkowicz, J., Wodecki, J., Dybkowski, M., Wolkiewicz, M., Weisse, S., Valire, J., Szabat, K., Zimroz, R., and Wylomanska, A., 'Statistical test for cyclostationarity based on csc-based indicators - application to vibration signals from electric motor', Wroclaw University of Science and Technology.
• Kent, J. J., De Carvalho Loures, M., and Gower, A. L., 'A tomographic method to predict forces in a rolling element bearings', University of Sheffield.
• Shiri, H., Zimroz, P., Wylomanska, A., and Zimroz, R., 'Robust remaining useful life prediction from time-varying health index data in presence of heavy-tailed noise', Wroclaw university of science and technology.
• Jabbar, A., Fonte, C., D'Elia, G., and Cocconcelli, M., 'Ball-bearings fault detection for an independent cart system: experimental campaign and preliminary results', University of Modena and Reggio Emilia.
• Anastasopoulos, D., and Reynders, E. P. B., 'Experimental and numerical investigation of the influence of the ductile-to-brittle transition of steel on the modal characteristics of a vierendeel truss bridge', KU Leuven.
• Baldini, S., Bernardini, R., Fusiello, A., Gardonio, P., and Rinaldo, R., 'Vibration measurement with event cameras', Università degli Studi di Udine.
• Salvi, J., and Rinaldi, L., 'Early experiences in monitoring systems for offshore platforms: towards an integrated approach for asset integrity and model updating', Solgeo S.r.l..
• Spiliotopoulos, P. E., Fassois, S. D., and Sakellariou, J. S., 'Vibration data based robust damage detection under unobservable operating conditions via the functional model based method', University of Patras.
• Severa, L., Milana, S., Roveri, N., Culla, A., and Carcaterra, A., 'Best features extraction for ml-based structural health monitoring', Sapienza University of Rome.
• Dubber, K., Waters, T., and Ferguson, N., 'The effects of model reduction on the shock response spectra of multi-modal structures', University of Southampton.
• Castellani, F., and Belcastro, F., 'Wind turbine pitch misalignment detection through tower vibration signal processing', University of Perugia.
• Matthys, J., Peeters, C., Protopapadakis, G., Sterckx, J., and Helsen, J., 'Comparative analysis of vibration and angular speed signals using synchronized data acquisition for bearing fault detection', Vrije Universiteit Brussel.
• De Fabritiis, F., and Gryllias, K., 'A vibration based self-learning approach for machine condition monitoring', Flanders Make @ KU Leuven.
• van de Velde, M., Vandecruys, E., Verstrynge, E., Reynders, E., and Lombaert, G., 'The influence of pre-existing corrosion damage on vibration-based monitoring during mechanical load-testing of reinforced concrete beams', KU Leuven.
• Paprocki, C. A., Barnard, A., Dare, T., Cody, K., and Newman, P., 'Acoustic source separation of transient events from background noise', Penn State.
• Donderer, M., Rieß, A., Waldenmaier, U., Neher, J., and Ehlers, S., 'Participation factor based identification of mode shapes', MAN Energy Solutions SE.
• Kumar Sharma, J., and Deraemaeker, A., 'Comparative analysis of time-stretching and mwcs techniques for compensation of environmental effects in structural health monitoring of concrete infrastructure', Université Libre de Bruxelles.
• Silva, T. A. N., and Amaral, P., 'Data-driven damage assessment using a cloud of spheres algorithm', NOVA FCT - UNIDEMI.

Case studies in noise and vibration engineering

• Karl, T., and Sachau, D., 'Comparison of feedback and feedforward active noise control concepts in an application with a partially open window', Helmut-Schmidt-University Hamburg.
• Schedlinski, C., 'Pitfalls in shaker vibration tests on lightweight structures', ICS Engineering GmbH.
• Ratke, X. Y., and Sattel, T., 'Vibration reduction design approach for motor-driven fans using piezoelectric actuators including identification, model order reduction and optimization', TU Ilmenau.
• Mastrodicasa, D., Morrone, A., Di Lorenzo, E., Colangeli, C., Cosco, F., and Peeters, B., 'Reconstruction of the sound radiation field from plate dic vibration measurements', Siemens Industry Software NV.
• Zeng, R., Deckers, E., Glorieux, C., Urbán, D., and Chmielewski, B., 'Locally resonant metamaterial wall targeting tonal noise arising from heat pumps in residential buildings', KFB Acoustics sp. z o. o..
• Hense, A., Chauvicourt, F., Brughmans, M., van Ophem, S., and Deckers, E., 'Evaluation of machine learning techniques for the nvh design of electric vehicle battery', Siemens Digital Industries Software.
• Khelifi, A., 'Acoustic stealth of armoured vehicles – test, modelling and parametric analysis', KNDS.
• Montava Belda, I., Segura Alcaraz, J. G., Sanchis Juliá, E., and Gadea Borrell, J. M., 'Acoustic absorption of panels made of agglomerated olive leaves with a polymer matrix', Universitat Politècnica de València.
• Ota, H., Sato, T., and Niita, S., 'Calculation of excitation forces generated by axial-flow fan system', Tokyo Denki University.
• Kumar, S., and Kumar, A., 'Vibration attenuation in aesa radar transmit/receive module via particle damping: an experimental study', IIT Roorkee.
• León, D. R., Palomares, E., Morales, A. L., Nieto, A. J., Chicharro, J. M., and Pintado, P., 'On the influence of speed and track quality on the comfort index treated as a stochastic variable for railway vehicles', Universidad de Castilla-La Mancha.
• Mahmud, M., Dirhamsyah, M., Abdullah, S., and Rizal, M., 'The analysis of design feature with vibration signal feature on 3d printing machine', Aceh Polytechnic.
• Rossini, M., De Marco, M., Prodi, N., and Acri, A., 'Sound quality analysis of door and drawer openings on washing machines', Università di Ferrara.
• Sahana, S., Singh, A., and Bhattacharya, B., 'Variable cross-section metabeams with resonators for enhanced vibration attenuation capabilities', Indian Institute of Technology Kanpur.
• Corno, M., Becht, P., Blockmans, B., and Naets, F., 'A novel approach for accelerated system-level simulation in wind turbine powertrain testing: analyzing responses to cardan shaft-induced vibrations', Flanders Make @ KU Leuven.
• Cunha, B. s. c., and de Lima, A. M. G., 'Influence of partial treatment on curved plates with viscoelastic sandwich panels in aeroelastic systems using the nonplanar doublet-lattice method under subsonic regime', Federal University of Uberlândia.
• Li, P., Zeng, Z., and Ye, M., 'Elastic wave propagation characteristics of periodictrack structure in urban rail transit', Central South University School.
• Mao, H., Zhao, H., Larsson, J., Yin, B., Rumpler, R., Tibert, G., and Göransson, P., 'Optimization of 3d lattice metastructures based on distorted kelvin cell for low-frequency vibration suppression', KTH Royal Institute of Technology.
• Altshul, G., Guskov, M., Balmes, E., and Lorong, P., 'Milling robot modal analysis using spindle-driven unbalanced excitation in context of its response nonlinearity', PIMM.
• Faraj, R., Mikułowski, G., Wiszowaty, R., and Graczykowski, C., 'Adaptive mitigation of unknown dynamic excitation using pneumatic damper with proportional piezoelectric valve', Institute of Fundamental Technological Research, Polish Academy of Sciences.
• Jiang, J., and Xiong, Y., 'Dynamic topology optimization of arbitrarily-shaped 3d structures using a newly developed numerical framework in abaqus environment', University of Southampton.
• Roberjot, J., Sadoulet-Reboul, E., Chevallier, G., Peyret, N., Jaboviste, K., Arnould, C., Collard, E., and Bachy, E., 'Tunable suspension stiffness through thermally controlled polymers', Femto-st / Thales LAS.
• Gao, Y., Ziegler, P., and Eberhard, P., 'A numerical model for reconstructing the transport-induced vibration of paintings on a testbed', University of Stuttgart.
• Torres, J. E., and Buen, A., 'Vibrations from treadmills', Brekke Strand Akustikk.
• Tiseo, B., Rufolo, G. C., Fauci, R., Concilio, A., Di Caprio, F., Scigliano, R., Pisano, F. M., Gardi, R., De Stefano Fumo, M., Fragiacomo, M., Quaranta, V., and Bruno, G., 'Space rider: thermal protection system configuration and body flap development test', CIRA Centro Italiano Ricerche Aerospaziali.
• Lainer, M., and Müller, G., 'A wave based method for the modeling of two canyons exposed to an oblique incident wave front', Technical University of Munich.
• Tcherniak, D., Nielsen, S. K., van Beveren, S. C., Berring, P., Semenov, S., and Branner, K., 'Application of virtual sensing to enhance fatigue testing of a 70+ meters wind turbine blade', Hottinger Bruel and Kjaer.
• Berkhoff, A., 'Decentralized feedback damping with distributed control applied to ducts and anechoic chambers', University of Twente.
• Arnoult, T., Zamponi, R., Glabeke, G., Toulorge, T., Jovanovic, V., Schram, C., and Planquart, P., 'Aeroacoustic measurements of a high-lift model with different slat track geometries', Von Karman Institute for Fluid Dynamics.
• Dindorf, C., Pandiya, N., and Schmidt, A., 'Shaping vibration engineering for the automotive transformation', Robert Bosch GmbH.
• Peri, L., Pagano, M., Dozio, L., and Nali, P., 'A hybrid two-stage model order reduction and substruc- turing scheme involving craig-bampton method and bal- anced truncation', KU Leuven.
• Monteiro, W. V. O., Nóbrega, E. D., and dos Santos, J. M. C., 'Modeling and numerical analysis of waveguides in defective phononic crystal lattice structures', University of Campinas.
• Talbot, J. P., and Edirisinghe, T., 'Some observations on the significance of soil-structure interaction in the transmission of ground-borne vibration into buildings', University of Cambridge.
• Askari, M., Ghandchi Tehrani, M., Brusa, E., Carrera, A., and Delprete, C., 'A novel multimodal piezoelectric vibration energy harvester integrated with a practical read-out circuit', University of Groningen.
• Bartfai, A., Laka, I., Munoa, J., and Dombovari, Z., 'Experimental study of low frequency chatter vibrations in robotic milling', Budapest University of Technology and Economics.
• Zucchini, A., Hülsmann, A., and Naets, F., 'On the multi-domain transmissibility evaluation of dynamic structures with reduced-order models through frequency based substructuring', BMW.
• Moons, S., Lanoye, R., and Reynders, E., 'A wave-based approach to predict the vibration transmission across junctions with elastic interlayers', KU Leuven.
• Ostrowski, M., Blachowski, B., Mikułowski, G., and Jankowski, Ł., 'Semi-active control of modal energy transfer by means of lockable joints: theory and applications', Institute of Fundamental Technological Research, Polish Academy of Sciences.
• Ogun, O., Rice, H. J., and Kennedy, J., 'The influence of dataset generation on the performance of deep learning for amm design', Trinity College Dublin.
• Nunes, J. T. T., Policarpo, H., Neves, M. M., and Maia, N. M. M., 'Frequency-domain estimation of acoustic and vibro-acoustic responses using transmissibility functions and few sensors', IDMEC.
• Mao, H., Holmén, A., Yin, B., Rumpler, R., Tibert, G., and Göransson, P., 'Characterization of thermal elastic moduli of anisotropic lattice metamaterials: designing dual-functional metamaterials with low thermal expansion and vibration mitigation capabilities', KTH Royal Institute of Technology.
• Melero, M., Nieto, A. J., Morales, A. L., Jimenez, J., Ramiro, C., and Pintado, P., 'Experimental analysis of passive damping techniques applied to a cantilever beam using piezoelectric patches and constrained layer damping', Universidad de Castilla-La Mancha.
• Herfert, D., Krause, J., Henning, K., and Gollnick, M., 'Examining the dynamic characteristics of a tennis racket through high-speed videos', GFaI e.V..
• Cillo, P., Ziegler, P., and Eberhard, P., 'Geometrical parameterization of a finite element model to account for material variability in classical guitar design', University of Stuttgart.
• Manterola, J., Usabiaga, H., Leciñana, I., and Olave, M., 'Vibration fatigue analysis of laser welds on battery modules', IKERLAN.
• Tincani, S., Delvecchio, S., and Barbieri, M., 'Assessment of a substructuring model and dynamic characterization of anti-vibrating mounts', Robert Bosch GmbH.
• Levin, S., and Halevi, Y., 'An alternative method for finite dimension models of flexible structures via padé approximation', Technion and Shenkar.
• Mariotti, P., Rumpler, R., and Mao, H., 'A modified bayliss-turkel absorbing boundary condition for non-spherical truncated boundaries of acoustic problems and fast frequency sweeps', KTH - Royal Institute of Technology.
• Cibrario, L., Gastaldi, C., Cozza, I. F., Credo, G., Saracino, M., Delprete, C., and Scarpa, F., 'A multi-scale homogenization-based approach for dynamic simulation of lattice metamaterials', Politecnico di Torino.
• Mikułowski, G., Ostrowski, M., Blachowski, B., and Jankowski, Ł., 'Semi-active control of modal energy transfer by means of lockable joints:­ experimental verification', Institute of Fundamental Technological Research, Polish Academy of Sciences.
• Balmes, E., Martin, G., and Vo Van, O., 'Non-linear viscoelastic damping: designing tests needed for transient simulation of a rail track', ENSAM / SDTools.
• Pierro, E., and Carbone, G., 'Thermal fluctuations of nano cantilevers for the detection of the biological particles modifications', University of Basilicata.
• Kabirian, Z., Carneiro, D., Lombaert, G., and Degrande, G., 'Mitigation of environmental ground vibration in layered soils using seismic metasurfaces', KU LEUVEN.
• de La Bigne, M., Cattan, E., Ghenna, S., Zwingelstein, M., Grondel, S., and Thomas, O., 'A new design and optimization method of a nano-aerial vehicle with resonant vibrating wings', IEMN.
• Kras, A., and Gardonio, P., 'Flywheel inertial vibration absorber', Silencions.
• Decobert, F., Faye, S., and Bemol, L., 'Development of multiaxial vibration test systems for small objects', SEREME.
• Danforth, S. M., Johnson, S. M., Fenstermacher, K. F., Ramirez, A. J., Sedillo, H. R., Schultze, J. F., and Ferguson, E. W., 'Developing methods for single-axis base excitation vibration testing with additional distributed shakers', Los Alamos National Laboratory.
• Baldini, S., Guernieri, G., Gorjup, D., Gardonio, P., Slavič, J., and Rinaldo, R., 'Reconstruction of cylinder flexural vibration and sound radiation fields from multi-view single-camera measurements', Università degli Studi di Udine.
• Taylor, C., DeClerck, J., Blough, J., VanKarsen, C., Labyak, D., and Joshua, R., 'Dynamic fixture development for a structure with two independent attachment points', Michigan Technological University.
• Ortis, L., Gardonio, P., Rustighi, E., Malacarne, C., and Perini, M., 'Vacuum plant for structured fabric tva', Università degli Studi di Udine.
• Becht, P., De Smet, B., Schmidt, S., and Blockmans, B., 'Tonality spread of wind turbines due to production and measurement tolerances', ZF Wind Power.

Experimental and hybrid methods for dynamic identification and testing

• Dal Borgo, M., Musella, U., Thielemans, L., Vettori, S., G. de Miguel, A., Pastorino, R., Di Lorenzo, E., and Peeters, B., 'Real-time virtual shaker testing using an executable digital twin', Siemens Digital Industries Software.
• Aimé, M., Banvillet, A., Khalij, L., Pagnacco, E., Chatelet, E., and Dufour, R., 'Multiaxial test-tailored vibration specifications: process overview', French Alternative Energies and Atomic Energy Commission (CEA).
• Case, J. A., Barnard, A., and Taggart, A., 'Non-contact measurement of haptic systems', Penn State.
• Vettori, S., Mastrodicasa, D., Sosa Chavez, A., Laurini, A., Di Lorenzo, E., and Janssens, K., 'Distributed load and full-field response reconstruction during wind tunnel testing of an aluminum wing', Siemens Digital Industries Software.
• Brunetti, J., D'Ambrogio, W., Di Manno, M., Fregolent, A., and Ialonardi, M., 'Dual substructure decoupling for joint identification with unmeasurable interface: a comparative study', Università degli studi di Roma La Sapienza.
• Martini, V. M., Okabe, E. P., and Cavalca, K. L., 'Extraction of the rotor dynamic behavior on a flexible support structure by dynamic substructuring', University of Campinas.
• Abuhemeida, N., Vaillant, D., Chevallier, G., Cronfalt, F., Topenot, M., and Ouisse, M., 'Examining sliding in rotor assemblies: an experimental study', Femto ST / Alstom.
• Reymert, S., and Wiig Petersen, Ø., 'Application of an augmented kalman filter to the inverse identification of aerodynamic loads on a road vehicle', Norwegian University of Science and Technology.
• Balmes, E., Vermot des Roches, G., and Nacivet, S., 'Hybrid fem/test twin building, an electric engine case history', ENSAM / SDTools.
• Cooper, J., 'Prediction of limit cycle oscillations from aeroelastic test data', University of Bristol.
• Sbarra, R. G., Del Priore, E., Coppotelli, G., Lampani, L., and Pasquali, M., 'On the use of fiber optic sensors and operational modal analysis for structural health monitoring in aerospace structures', Sapienza University of Rome.
• Zaletelj, K., Šonc, J., Slavič, J., and Boltežar, M., 'Thermoelasticity-based strain experimental modal analysis', University of Ljubljana.
• Gupta, T., and Bhattacharya, B., 'Dynamic study of bandgap in hierarchical metastructure', Indian Institute of Technology Kanpur.
• Ali, M. J., and Saeed, Z., 'Optimal expansion of interface degrees of freedom using system equivalent model mixing', National University of Sciences and Technology (NUST).
• Gazdagh, Z. G., Acs, D., Vehovszky, B., and Fukker, B., 'Control of transfer function distortion during rpm-sweep testing of e-drive systems', Robert Bosch Kft.
• Taghipour, J., and H. Biroun, M., 'Dynamics of a cantilever beam under the effect of the water droplet impact', Dyson Institute of Engineering and Technology.
• Lim, S., Woellner, U., and Suglob, A., 'Sensor calibration procedure in high frequency range using laser doppler vibrometer', Zeiss SMT.
• Pandiya, N., 'Modal sub-structuring application to the round robin frame structure', Robert Bosch GmbH.
• Pierro, E., Grillo, D., and Carbone, G., 'The influence of a static axial preload on the vibrational behaviour of a viscoelastic beam: an experimental assessment', Politecnico di Bari.
• Shiri, B., Esmaeili, M., and Seyedkazemi, M., 'Experimentally and numerically detection of longitudinal crack in concrete sleeper by modal identification and model updating method', Iran University of Science and Technology.
• Cai, Z., Mao, H., Henriquez, V., and Lucklum, F., 'Study of the effect of load on the vibro-acoustic behavior of kelvin-cell foam', Technical University of Denmark.
• Forrier, B., Bianciardi, F., Elkafafy, M., and Janssens, K., 'Real-time virtual prototype assembly: evaluation of a fir filter based and a state space model based approach', Siemens Digital Industries Software.
• Iaffaldano, D., Guida, R., and Carassale, L., 'Estimation of synchronous response of time-variant systems by rotated wavelet probing', Università degli Studi di Genova.
• Ogbodo, C. O., Rogers, T. J., Dal Borgo, M., and Wagg, D. J., 'Mode indicator guided sequential modal analysis', University of Sheffield.
• Si, Y., Zhu, Y., Kutz, J. N., and Cheng, L., 'Data-driven approaches in modal analysis of building structures', University of Groningen.
• Varga, T. F., Gazdagh, Z. G., Szabo, L. L., Bubreg, M., and Fukker, B., 'Experimental modal analysis based tpa method of wiper system linkage vibration amplification', Robert Bosch Kft.
• Terzioglu, F., and Rongong, J. A., 'A simple predictive method for evaluating damping from thin viscoelastic layers in structures', The University of Sheffield.
• Schultz, R., and Carter, S., 'Possible advantages to using a force-controlled mimo test method for free-flight environments', Sandia National Laboratories.
• Garcia de Miguel, A., Araujo, R., Musella, U., dal Borgo, M., Forrier, B., di Lorenzo, E., and Cornelis, B., 'Multi-axis shock and vibration control testing of automotive battery packs: challenges of an innovative testing practice', Siemens Industry Software NV.
• Buchbach, R., Sinske, J., Govers, Y., and Böswald, M., 'Database-supported correlation of modal data - the dlr correlation tool', German Aerospace Center.
• Maressa, A., 'Model-based approach to enhance cvt pushbelt testing and product performance', Bosch Transmission Technology.
• Korbar, J., Ocepek, D., Boltežar, M., and Čepon, G., 'Training artificial neural networks using substructuring techniques: application to joint identification', University of Ljubljana, Faculty of Mechanical Engineering.
• Syamlan, A., Denis, K., Vander Poorten, E., and Tjahjowidodo, T., 'Cutting torque model for patient - specific pedicle screw surgical simulators', KU Leuven.
• Ricardo Ambrosio, D., Alexandre Camargo, E., Candido de Sousa, V., Fernando Castillo Zúñiga, D., Sartorato, M., Costa, N., and Luiz Oliveira, É., 'Modal characterization of a helicopter stabilizer from flight test campaign with externally mounted accessory', São Paulo State University.
• Tomac, I., Gorjup, D., and Slavič, J., 'Pixel based experimental modal analysis', University of Split.
• Erdelyi, J. A., Gazdagh, Z. G., Bartus, A., and Fukker, B., 'Rattling detection of electric components', Robert Bosch Kft.
• Boscia, M., Sbarra, R. G., Coppotelli, G., and Piergentili, F., 'Analysis of the experimental properties of cubesat-class satellites for the simplification of the launch clearance process', Sapienza University of Rome.
• Brøns, M., and Trainotti, F., 'A framework for correcting measurement position and directions to improve experimental frequency-based substructuring and hybrid models', Technical University of Denmark.
• Trainotti, F., Zobel, O. M., and Rixen, D. J., 'A comparative analysis of frequency- and impulse-based substructuring for experimental shock response predictions', Technical University of Munich.
• Tavares, A., Di Lorenzo, E., Cornelis, B., Manzato, S., Peeters, B., Desmet, W., and Gryllias, K., 'An industrial benchmark study of automated modal analysis using density-based clustering techniques', Siemens Digital Industries Software.
• Behling, M., Allen, M., Mayes, R., and DeLima, W., 'Understanding fixture design in immats through fem simulations', Brigham Young University.
• Carter, S. P., and Rohe, D., 'Using multi-shaker force control methods in modal analysis', Sandia National Laboratories.
• Machacek, M., Hračov, S., Vavřík, D., and Rada, V., 'Comparison of fundamental natural modes of cantilevered beam obtained by 3d x-ray computed tomography and laser doppler vibrometry', The Institute of Theoretical and Applied Mechanics.
• Kreutz, M., Trainotti, F., and Rixen, D. J., 'On the experimental linear identification of a multiple-joint bolted connection using frequency-based substructuring', Technical University of Munich.
• Els, D. N. J., and Venter, M. P., 'Investigation of large, air-cooled condenser drive-train torque oscillations during startup', Stellenbosch University.
• Marion, M., Lossouarn, B., Rouleau, L., Voisin, A., Leblond, C., and Deü, J.-F., 'Modal analysis of metallic structures filled with elastomer and inverse identification of material parameters', Conservatoire National des Arts et Métiers.
• De Gregoriis, D., Capurso, F., and Atak, O., 'Structural model parameter identification: leveraging augmented kalman filtering and parametric reduced order models within an optimization scheme', Siemens Digital Industries Software.
• Alexandre Camargo, E., Ricardo Ambrosio, D., Candido de Sousa, V., Fernando Castillo Zúñiga, D., Sartorato, M., Costa, N., and Luiz Oliveira, É., 'Effect of rotational speed on the modal parameters of a helicopter blade based on operational modal analysis approach', São Paulo State University.
• Cosco, F., Mastrodicasa, D., Mundo, D., and Di Lorenzo, E., 'Video motion and modal magnification: towards a new paradigm for oma', University of Calabria.
• Poleg, Y., Bucher, I., and Minikes, A., 'Experimental method to predict critical buckling pressure of thin wall vessel using acoustic actuation and sensing', Technion.
• Di Manno, M., Trainotti, F., Ialonardi, M., Rixen, D. J., and Fregolent, A., 'A combined vpt and svt approach for decoupling in the presence of inaccessible and deformable interfaces', La Sapienza.
• Gebel, J., Daems, P.-J., Matthys, J. J., Sterckx, J., Vratsinis, K., Kestel, K., Nejad, A. R., and Helsen, J., 'Comparison of modal behaviour in wind turbines based on drivetrain measurements', NTNU.
• Soine, D., 'Resonant plate shock test response with isolated damping bars', Sandia National Laboratories.
• Proner, E., and Mucchi, E., 'A novel mimo random control strategy for efficient response replication at the component level', University of Ferrara.
• Hüttich, P., and Krause, D., 'Holistic approach to vibration characterisation of large structural components in thermal environment', TUHH.
• Kamper, M., and Naets, F., 'Geometric parameter estimation of thin-walled structures using finite element model updating, shape optimisation and frequency response functions', Flanders Make @ KU Leuven.
• Bottalico, F., and Sabato, A., 'Assessment of three-dimensional displacements via a novel natural-pattern tracking algorithm', University of Massachusetts Lowell.
• Peshave, A. M., Wittevrongel, L., Pierron, F., and Lava, P., 'Damage detection in 3d-printed metal alloys by characterization of modal behaviour', MatchID NV.
• Zobel, O. M., Trainotti, F., and Rixen, D. J., 'Improving experimental impulse-based substructuring through interface weakening', Technical University of Munich.
• Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Ialonardi, M., 'Evaluation of the configuration-dependent dynamics of a cartesian 3d printer using substructing techniques', Università degli Studi dell'Aquila.
• Gazdagh, Z. G., Fukker, B., and Vehovszky, B., 'Unlocking the insights of dynamics through experimentation of an electric drive', Robert Bosch Kft.
• Pacini, B. R., Kuether, R. J., and Fowler, D., 'Comparative study of nonlinear modal modeling identification techniques from force appropriation experiments', Sandia National Laboratories.
• Taghipour, J., Ebrahimzade, N., Pandey, P., Haddad Khodaparast, H., and Friswell, M. I., 'Enhancing model selection for a nonlinear system: a physics-based machine learning approach', Dyson Institute of Engineering and Technology.
• Occhipinti, S., Cesaretti, A., Neri, P., Firrone, C. M., and Botto, D., 'Analysis of nonlinear vibrations of a blade with dovetail attachment using dic and the smoothed harmonics analysis', Politecnico di Torino.
• Diord Rescinho Amador, S., 'A new poly-reference complex frequency-domain identification technique formulated in state-space model', Technical University of Denmark (DTU).
• Goris, M., Deckers, E., and Naets, F., 'Co-simulation approach integrating multibody and discrete element modeling for robomould process analysis', Flanders Make @ KU Leuven.
• Iglesias, A., Franco, O., Beudaert, X., Sanz-Calle, M., and Munoa, J., 'Analysis of variability in machine tool dynamics through enhanced smfe method', Ideko S.Coop..
• Soresini, F., Barri, D., Manzoni, S., Ballo, F. M., and Gobbi, M., 'Modal characterization of a pmsm using different experimental techniques', Politecnico di Milano.

Inverse methods for dynamic material or component characterization

• Leanza, A., De Carolis, S., Carbone, G., and Soria, L., 'Enhancing road roughness identification and system observability through measurement strategies in vehicle dynamics', Politecnico di Bari.
• Gomez, T. S., Jun, D., Cuenca, J., Sebaa, N., De Ryck, L., Armstrong, R., Piana, E., and Glorieux, C., 'Extraction of tortuosity of melamine foam from ultrasonic transmission measurements: experimental improvement', KU Leuven.
• Wu, P., Magnevall, M., Liljerehn, A., and Östling, D., 'Cutting force estimation in metal cutting tools: a study on a sensor-equipped cantilever beam', AB Sandvik Coromant.
• Li, X., Mao, H., Ichchou, M., Rumpler, R., and Göransson, P., 'Determination of the equivalent mechanical parameters of honeycomb sandwich structures under the algebraic identification framework', KTH Royal Institute of Technology.
• Bronkhorst, A. J., Marchelli, E., Moretti, D., Maes, K., and Lombaert, G., 'Identification of the modal and structural properties of a high-rise scale model', TNO.
• Brion, T., Li, X., Fossat, P., Ichchou, M., Bareille, O., and Zine, A.-M., 'Algebraic k-space identification 2d technique for the automatic extraction of complex k-space of 2d structures in presence of uncertainty', Ecole Centrale de Lyon.
• Feng, N., Hahn, E. J., and Yu, M., 'On improving the identification of lumped parameter systems with symmetric mass, damping and stiffness matrices', The University of New South Wales.
• Wang, T., Bi, S., and Mottershead, J. E., 'The role of the conditional network in data-driven stochastic model updating based on the conditional invertible neural network (cinn)', University of Southampton.

NVH control solutions

• Ellis, J., Balatti, D., Haddad Khodaparast, H., Jiffri, S., and Friswell, M., 'Reduction of root loads due to gusts via active hinged wing tip control', Swansea University.
• Rodriguez, J., Carvalho, A., and Chesné, S., 'On a new methodology for adaptive sliding mode control with self-tuning threshold: application to active vibration control', INSA Lyon.
• Giannini, D., and Reynders, E. P. B., 'Optimized multi-modal rotational resonators for enhanced sound insulation in metamaterial cross-laminated timber panels', KU Leuven.
• Lundberg, E., Mao, H., Gaborit, M., Semeniuk, B. P., Rumpler, R., and Goransson, P., 'Tuning low-frequency sound absorption in anisotropic multilayered poroelastic media using analytical microstructure modelling', KTH Royal Institute of technology.
• Ballestero, E., Meng, Y., Romero-García, V., Tournat, V., and Groby, J.-P., 'Optimal bi-state acoustic metamaterial for broadband sound absorption and diffusion: a real-estate dilemma', Le Mans Université.
• Herrera-Leon, N., Godinho, L., Amado-Mendes, P., and Redondo, J., '3d simulation of porous concrete sonic crystals for noise barrier applications', Universidade de Coimbra.
• Gungl, S., Horváth, K., and Kimpián, T. A., 'Applications of phase-based motion magnification in vibration analysis of steering systems', thyssenkrupp Components Technology Hungary Ltd..
• Janssen, S., Schimidt, C. S., de Oliveira, L. P. R., De Marqui Junior, C., Claeys, C., and Deckers, E., 'On the stop band adaptivity range of locally resonant metamaterial resonators with piezoelectric patches: a case study', Flanders Make @ KU Leuven.
• Richiedei, D., Tamellin, I., and Trevisani, A., 'The virtual tuned mass damper for adaptive vibration absorption on a flexible joint robotic arm', University of Padova.
• Cool, V., Claeys, C., Denayer, H., Naets, F., and Deckers, E., 'Experimental validation technique for near-2d structures towards the sound transmission loss', Flanders Make @ KU Leuven.
• Nikolaou, C., Cheer, J., and Langfeldt, F., 'An investigation into the combination of passive acoustic treatments and active structural acoustic control', University of Southampton.
• Arandia-Krešić, S., Alujević, N., Mikšik, N., and Bolat, F. Ç., 'Active metamaterial cell for nonreciprocal sound transmission', University of Zagreb.
• Leung, K., and Langfeldt, F., 'A numerical study of a vibro -acoustic metamaterial with an embedded helmholtz resonator', University of Southampton.
• Lopes, K. W., and de Oliveira, L. P. R., 'Vibration attenuation with shape memory alloy-embedded resonators', São Carlos School of Engineering, University of São Paulo.
• Sanches Schimidt, C., de Oliveira, L. P. R., Janssen, S., Claeys, C., Deckers, E., and De Marqui Junior, C., 'Sound directivity control by tailoring piezoelectric metamaterial vibration modes', Flanders Make @ KU Leuven.
• Austin, B., and Cheer, J., 'Active control of a tuned vibration absorber for use in metamaterial applications', University of Southampton.
• Yoshimura, T., and Hong, J., 'Baseline sensitivity analysis for vibration reduction in mid-frequency range', Tokyo Metropolitan University.
• Pike, X., and Cheer, J., 'Comparison of neural network architectures for feedforward active control of nonlinear systems', University of Southampton.
• Niedzielczyk, M., Galland, M.-A., and Zieliński, T. G., 'An acoustic material with tortuous slits filled with fibres', Institute of Fundamental Technological Research Polish Academy of Sciences.
• Kleine-Wächter, L., Rumpler, R., Mao, H., Göransson, P., and Müller, G., 'Numerical and experimental investigations of wave propagation in kelvin cell-based periodic lattice architectures', Technical University of Munich.
• Souto, B. A., Beli, D., and De Marqui Jr., C., 'Topological wave states in electromechanical metamaterials', Eindhoven University of Technology.
• Zhang, R., Xu, J., and Xia, Y., 'Experimental investigation of a tuned mass inerter system (tmis)', Tongji University.
• Mardini, L., Deckers, E., Claeys, C., and Van Damme, B., 'Improved vibration isolation of 1d chiral phononic crystals with viscoelastic inserts', EMPA.
• Cheer, J., Singleton, L., and Tan, J., 'Integration of active control with a compound acoustic black hole', University of Southampton.
• Opiela, K. C., Dauchez, N., Boutin, T., Bécot, F.-X., Chevillotte, F., Venegas, R., and Zieliński, T. G., 'Comparison of double-porosity sound absorbers made of sintered or glued powder grains', Institute of Fundamental Technological Research, Polish Academy of Sciences.
• Chojnacka, K., Kras, A., and Kamisiński, T., 'Sound transmission loss dip compensation using multi-resonant vibroacoustic metamaterial designed for injection moulding', AGH University of Krakow.
• Rodrigues, G. K., and de Oliveira, L. P. R., 'A multi-mode smart metamaterial for nvh control', University of Sao Paulo.
• Pizzolante, F., Artiano, A., Di Marcoberardino, S., Meleti, S., Tarabra, M., Battarra, M., and Mucchi, E., 'Dynamic modeling for enhanced acoustic comfort in agricultural machinery: nvh digital twin for tractor pump drive', Università degli studi di Ferrara.
• Santo, D. R., Deckers, E., Claeys, C., Boukadia, R. F., and de Oliveira, L. R. P., 'Improving the low-frequency vibration performance of metamaterials with high-static-low-dynamic stiffness local resonators', University of São Paulo.
• Keys, A., and Cheer, J., 'Optimisation of a modified acoustic black hole profile for the reduction of dynamic stress', University of Southampton.

Non-linear dynamics

• Bucher, I., Friedlander, M., and Uzhansky, E., 'Exploiting fluid nonlinearity for sound control and sensing with parametric speakers', Technion, Israel Institute of Technonology.
• Porter, J. H., and Brake, M. R., 'Superharmonic resonances and model validation with the half brake-reuss beam', Rice University.
• Floren, M., Peri, L., De Maeyer, J., De Munter, W., Vandepitte, D., and Noël, J.-P., 'Data-driven state-space identification and nonlinearity assessment of the cubespec fine steering mirror', KU Leuven.
• Massingham, J., Nielsen, O., and Butlin, T., 'Convolutional neural networks applied to nonlinear dynamical systems: a wiener series perspective', Cambridge University.
• Bull, L., Dardeno, T., Dervilis, N., Glyn-Davies, A., Bunker, J., Girolami, M., and Worden, K., 'Nonlinear normal modes as normalising kalman filters', University of Glasgow.
• Bauer, B., Papangelo, A., and Habib, G., 'A reduced order approach for race car porpoising', Budapest University of Technology and Economics.
• Thaller, T., Klanner, M., and Ellermann, K., 'Numerical method for transient analysis of beams with non-linear boundary conditions using a trefftz-based approach', Graz University of Technology.
• Gabos, Z., and Dombovari, Z., 'A resection algorithm for control-free shaker testing of weakly coupled smooth nonlinear systems', Budapest University of Technology and Economics.
• Pandey, P., Barman, S., Haddad Khodaparast, H., Mukhopadhyay, T., Madinei, H., Dey, S., and Friswell, M. I., 'Optimizing mass in mass metamaterials for enhanced energy harvesting: via analytical and machine learning approach', Swansea University.
• Yosifov, S., Bucher, I., Uzhansky, E., and Zinger, Y., 'Controlling spatial and rotational movement of small, acoustically levitated particles by phasing and rotating piezoelectric transducer arrays', Technion – Israel Institute of Technology.
• AlQahtani, N. A., Rogers, T. J., and Sims, N. D., 'Gp-narx for active control of nonlinear flexible structures', The University of Sheffield.
• Preston, O. H. L., Rogers, T. J., and Worden, K., 'Using higher-order frequency response functions from narx models to support activation function choices', The University of Sheffield.
• Seifert, A., and Hetzler, H., 'Numerical detection of frequency locking of quasi-periodic solutions', University of Kassel.
• Leitch, H., Yuan, J., and Stodieck, O., 'Nonlinear aeroelastic analysis of continuous tow sheared composite wings', University of Strathclyde.
• Saletti, G., Battiato, G., and Zucca, S., 'Coupled harmonic balance based approach for the non-linear dynamics of spur gear systems', Politecnico di Torino.
• Farokhi, H., Jamia, N., Jalali, H., Taghipour, J., Haddad Khodaparast, H., and Friswell, M. I., 'A new distributed joint model for non-ideal supports in curved panels under large-amplitude vibrations', Northumbria University.
• Antonelli, N., Gorgi, A., Aristio, R., Zorrilla, R., Rossi, R., Scovazzi, G., and Wüchner, R., 'Application of the isogeometric shifted boundary method to the poisson problem', CIMNE.
• El Yousfi, B., Soualhi, A., Lourari, A., Bouzar Essaidi, A., and El Amli, A., 'Effect of gear teeth elastic deformation on the gear mesh stiffness of parallel gearboxes', Ecole Militaire Polytechnique.
• Mikkelsen, J. K., Avendaño-Valencia, L. D., and Schlette, C., 'Optimal experimental design for modeling the dynamic response of a pseudo-static moving load on a beam', University of Southern Denmark.
• Raze, G., and Zhou, T., 'Numerical models and stability analysis of control-based methods for nonlinear vibration testing', University of Liège.
• Worden, K., 'Revisiting a link between algebraic geometry and nonlinear dynamics', University of Sheffield.
• Mashayekhi, F., and Alcorta, R., 'Damped nonlinear modes and forced response analysis of a system with hybrid nonlinearity', Politecnico di Torino.
• Lo, Y.-C., and Chan, Y.-J., 'Testing and modelling of nonlinear dynamic behavior of linear guideways', National Chung Hsing University.
• Paixão, J., Platzer, A., Rodriguez, J., Blal, N., and Baguet, S., 'Data-driven nonlinear restoring force identification using gaussian process regression model for feedback linearization', INSA Lyon.
• Black, J., Clawson, S., Allen, M., Crane, N., and Nelson, T., 'Nonlinear dynamic properties of powders in additively manufactured steel beams', Brigham Young University.
• Jamia, N., Pandey, P., Farokhi, H., Friswell, M. I., Haddad Khodaparast, H., and Jalali, H., 'Experimental analysis of dynamic characteristics in bolted joint interfaces of thin plates', Swansea University.
• Aristio, R., Alkhlaifat, M., Camarotti, J. I., and Wüchner, R., 'Cad-integrated isogeometric analysis of trimmed multipatch shells for transient non-linear problems', Technische Universität Braunschweig.
• Abundis-Fong, H. F., Trujillo-Franco, L. G., Gutierrez-Carmona, I., and Dzul-Lopez, A. E., 'Vibration control of a mechanical system using a passive/semiactive flexible inverted pendulum vibration absorber', Tecnológico Nacional de México/I.T. Pachuca.
• Goyder, H., 'Investigation of perfect curve fitting of spectra from linear and non-linear structures using barycentric interpolation', Cranfield University.
• Anastasio, D., Marchesiello, S., and Kerschen, G., 'Estimation of the periodic solutions of geometrically nonlinear structures by broadband excitation', Politecnico di Torino.
• Amaral, A. C. G., De Roeck, W., and Silveira, M., 'Numerical investigation of the aeroelastic response of a naca0012-profile in flutter condition including cubic nonlinear stiffness using urans based simulations', UNESP.
• Moldenhauer, B., Roettgen, D., and Linderholt, A., 'System identification of nonlinear attachments for the dynamic substructuring round robin structure', Sandia National Laboratories.
• Bee, S. C., Bull, L., Dervilis, N., and Worden, K., 'Regularising narx models with multi-task learning', University of Sheffield.
• Shaw, A. D., Nar, E., and Adhikari, S., 'Nonlinear behaviours of a class of inertial amplifiers', Swansea University.
• Cuccovillo, F., Berruti, T. M., and Botto, D., 'Exploring feasibility of neural networks for dynamic system with friction damping', Politecnico di Torino.
• Westmeier, T., Kreuter, D., Bucher, S., and Hetzler, H., 'Hybrid deep learning and frequency response function modelling for automotive testing', Robert Bosch GmbH.
• Khan, M., Pacini, B. R., and Kuether, R. J., 'Harmonic balance based methodology for reduced order modeling to predict response of nonlinear structures', Sandia National Laboratories.
• Raze, G., Abeloos, G., and Kerschen, G., 'Recent advances in control-based nonlinear vibration testing', University of Liege.
• Tatsis, K., and Agathos, K., 'A deep-learning approach for the identification of reducedorder nonlinear dynamics', Swiss Data Science Center (SDSC).

Novel NVH applications in machines and vehicles

• Rapisarda, A., Sangiuliano, L., D'Alessandro, L., and Pugno, N. M., 'Numerical aero-acoustic performance investigation of an axial fan with a bio-inspired structures design', University of Trento.
• Trekels, W., Staiger, J., del Fresno Zarza, J., and Naets, F., 'Lumped parameter modelling rubber bushing dynamics in free-free boundary condition', Flanders Make @ KU Leuven.
• Gergacz, B., Balogh, C. L., and Kimpian, T. A., 'Importance of data quality: an experimental study of passive-side noise in ctpa measurements', Gépészmérnök képzésért alapítvány.
• Knechten, T., 'On the excitation of a lightweight and low mass structure', Siemens Digital Industries Software.
• Fabbri, D., Bruzzone, F., Rosso, C., and Arina, R., 'Methods and applications of computational fluid-structure interaction for nvh problems - a review', Politecnico di Torino.
• Wagner, P., Langer, P., Maeder, M., and Marburg, S., 'Quantifying and validating vehicle seat nonlinearities using finite element modelling and experiments', BMW Group.
• Chen, X., He, Y., Deng, J., Xu, J., Wu, Z., Wu, J., Yan, W., and Wu, Y., 'The application of locally resonant acoustic metamaterials in automobile low frequency noise reduction', Southwest Jiaotong University.
• Ocepek, D., Trainotti, F., Korbar, J., Rixen, D. J., Boltežar, M., and Čepon, G., 'Exploring and applying sparse regression in admittance-based tpa methods', University of Ljubljana.
• Zhang, R., Xia, Y., and Xu, J., 'Experimental investigation of a tuned mass inerter system (tmis)', Swansea University.
• Rajan, S., and Palanivelu, S., 'Engineering analysis cum assessment of noise and vibration of operator-tractor-field system using operational transfer path analysis', Vellore Institute of Technology, Vellore.
• Kimpián, T. A., and Augusztinovicz, F., 'Experimental validation of the linear transducer model of permanent magnet synchronous motors for torsional vibration analysis applications', thyssenkrupp Components Technology Hungary Ltd..
• Salamone, N., Bianciardi, F., Colangeli, C., Janssens, K., Van Ophem, S., and Desmet, W., 'Real-time capable models for fast nvh and sound quality optimization of electric vehicles', Siemens Digital Industries Software NV.
• Hansen, K., and Sorokin, S. V., 'Frequency dependency of acoustic black hole effect in cylindrical shells', Grundfos A/S.

Novel applications in rotating system dynamics

• Couet, M., Deü, J.-F., Rouleau, L., Thouverez, F., and Gruin, M., 'Topology optimization of constrained layer damping on fan blades', Safran Aircraft Engines / CNAM Paris / Ecole Centrale Lyon.
• Hay, G., Giraud-Audine, C., Mahé, H., and Thomas, O., 'Electromagnetic shunt damping for torsional vibration reduction in rotating structures: theory, optimization, and experimental insights', Arts et Métiers.
• Cristofori, G., and Mucchi, E., 'Rattle detection in gearing systems by noise and vibration measurements', University of Ferrara.
• Occhipinti, S., Mastrodicasa, D., Manzato, S., and Di Lorenzo, E., 'Application of digital image correlation in operational modal analysis of rotating structures', Politecnico di Torino.
• Yorke, R., Garvey, S. D., and Amoozgar, M., 'Managing peak response as a rotor accelerates through a 'follower critical speed'', University of Nottingham.
• Mencik, J.-M., Nikiema, P., and Mbaye, M., 'On the dynamic behavior of bladed disks using wave finite element strategies and model reduction techniques', INSA Centre Val de Loire.
• Caselli, L., Rizzitelli, M., Rivola, A., and Troncossi, M., 'On the numerical modelling of a rotor system to support the analysis of experimental vibration signals for the condition monitoring of a cn lathe integrated with an automatic bar feeder', University of Bologna.
• Ahani, M., Bourdon, A., and Rémond, D., 'Characterization and identification of nonlinear cyclic excitations in non-stationary gearbox operations', INSA-Lyon.
• Mantas, P., Mauricio, A. R., Goossens, S. F., Ojo, D. S., Berghmans, F., and Gryllias, K., 'Rolling element bearing diagnostics using fiber bragg grating sensors', Flanders Make @ KU Leuven.
• Überwimmer, G., Klanner, M., and Ellermann, K., 'Analysis of rotor-bearing systems utilising fractional derivative material damping models', Graz University of Technology.
• Radoš, R., Alujević, N., Vladimir, N., Arandia-Krešić, S., and Catipović, I., 'Exact and an approximate solution for free vibrations of rotating cylindrical shells having both ends clamped', University of Zagreb.
• Baekeland, M., Cuypers, C., Delabie, T., Seiler, R., Gryllias, K., and Vandepitte, D., 'Modelling and tuning of a permanent magnetic suspension system for low-vibration flywheels', KU Leuven.

Simulation and Digital Twin approaches in mechatronic and multibody dynamics

• Mazzanti, L., Vivet, M., De Gregoriis, D., and Naets, F., 'A kalman-based approach to drivetrain misalignment estimation', Flanders Make @ KU Leuven.
• Cangi, G., Angeletti, A., Baldinucci, M., Palmieri, M., and Cianetti, F., 'A python software development for dynamic simulation of mobile elevating work platform', Universita degli studi di perugia.
• Dhote, V. K., Dutta, G. K., and E, H., 'Dynamic response studies of a typical naval fighter aircraft structure subjected to simulated arrested landing loads', Aeronautical Development Agency.
• Gioviti, P., Martini, A., Naets, F., Rivola, A., and Troncossi, M., 'An iterative procedure to integrate elastodynamic simulations and virtual commissioning of mechatronic systems: a machine tool case-study', University of Bologna.
• Vanpoucke, J., Roelandt, T., and Vandepitte, D., 'Longitudinal stability analysis of an insect-like flapping wing micro aerial vehicle operating at variable forward flight speed', KU Leuven.
• Fabre, F., Le Carrou, J.-L., and Chomette, B., 'Dynamic substructuring based on the complex udwadia-kalaba formalism', Institut Jean Le Rond d'Alembert.
• Karpik, A., Cosco, F., and Mundo, D., 'Convergence and comprehensive error analysis of higher-order fe formulations in structural dynamics', University of Calabria.
• Garcia, T., Rémond, D., and Chesné, S., 'Active vibration control of cable-driven parallel robots', INSA Lyon.
• Vancauwenbergh, L., Verbist, M., Vandepitte, D., Naets, F., Moens, D., Vanneste, G., Claessens, S., and Vercruijsse, P. M., 'Analyzing transient cutting behaviour of a cutter suction dredger drive train: enhancing operational efficiency through co-simulation', KU LEUVEN.
• Antonelli, M. G., Brunetti, J., D'Ambrogio, W., Fregolent, A., and Marafini, F., 'Identification of the electromechanical model of a pneumatic positioner for the dynamic actuation of an oscillating platform', Università degli Studi dell'Aquila.
• Shen, X., Devaraja, P., Wagg, D., and Bonney, M., 'Knowledge graphs for digital twins of structural dynamic systems', The Alan Turing Institute.
• Thielemans, L., Sputh, B. H. C., Pastorino, R., Desmet, W., and Swevers, J., 'Industrial application of residual power method as co-simulation performance indicator for e-motor hybrid-physical-virtual test setup', Siemens Industry Software NV.
• Fleres, D., De Gregoriis, D., Atak, O., and Naets, F., 'Non-intrusive parametric hyper-reduction for nonlinear structural finite elements formulations', Siemens Digital Industries Software.
• Malund Dammark Jensen, A., Lund Thing, M., Gres, S., and Abbiati, G., 'Input-state estimation for multi-body dynamic systems with bayesian filters', Aarhus University.
• Shapira, D., and Bucher, I., 'Optimization of the ultrasonic dynamics and kinematics for a micron-scale accurate ultrasonic transducer', Technion - Israel Institute of Technology.
• Desenfans, P., Gong, Z., Vanoost, D., Gryllias, K., and Pissoort, D., 'Modelling mechanical faults in induction motors using magnetic equivalent circuits and lumped-element shaft-bearing dynamics', KU Leuven, Bruges Campus.
• Werner, D., Offner, G., Lorenz, N., and Schweiger, C., 'Refining gearbox multibody simulation: enhancements for nvh and acoustic analysis', AVL Deutschland GmbH.
• Auzanneau, B., Sadoulet-Reboul, E., Foltête, E., Ham-Livet, G., and Cogan, S., 'A methodology to manage the complexity of a nonlinear multibody digital twin in railway applications', Université Franche-Comté.
• Richiedei, D., Tamellin, I., and González, F., 'Co-simulation correction in multibody systems through eigenstructure assignment', University of Padova.
• Willems, T., Zaletelj, K., Vanpaemel, S., Slavič, J., and Naets, F., 'Exploiting vision-based motion measurements for the experimental model identification of flexible multibody mechanisms', Flanders Make @ KU Leuven.
• Oyarzabal, A., Gil-Negrete, N., and Alonso, A., 'Data-based knowledge transfer to improve the accuracy of physical models in digital twins', Universidad de Navarra - Tecnun.

Simulation and Digital Twin approaches in vibro-acoustics

• Le, P., Panagiotopoulos, D., and Deckers, E., 'Model order reduction of isogeometric bem systems via krylov subspace recycling', Flanders Make @ KU Leuven.
• Daga, A. P., Viale, L., Agabiti, D., Fasana, A., and Garibaldi, L., 'Dynamic analysis of metamaterials for industrial applications: numerical predictions and experimental results', Politecnico di Torino.
• Wang, H., Van Belle, L., and Naets, F., 'Model-based noise and vibration analysis of electric vehicle e-motor and gearbox', Flanders Make @ KU Leuven.
• Zucca, G., Palmieri, M., Braccesi, C., and Cianetti, F., 'On the probability density function of rainflow stress range for sine on random processes', Aeronautical and Space Test Division.
• Natali, C., Battarra, M., Dalpiaz, G., and Mucchi, E., 'Tribo-dynamics of balanced vane pumps for automotive applications and experimental validation', University of Ferrara.
• Adhikari, S., and Jacques, A., 'Mode veering in dynamic systems via inertial coupling', University of Glasgow.
• Herbst, M., 'Comparison of the numerical accuracy of cms and fbs techniques in fem calculations', BETA CAE Systems SA.
• Graham, W. R., 'Theoretical prediction of belt properties for tyre-vibration modelling', University of Cambridge.
• Chocholaty, B., Leiber, C., and Marburg, S., 'Effects of similarity measures and assignment methods on mode pairing for the application of timber plates', Technical University of Munich.
• Barri, D., Soresini, F., Gobbi, M., Di Gerlando, A., Ballo, F. M., and Mastinu, G., 'Comparison of different electromagnetic forces calculation methods for the analysis of nvh behaviour of electric motors', Politecnico di MIlano.
• Duhamel, D., 'Dynamic response of large finite and non-symmetrical two-dimensional periodic structures', Ecole des Ponts ParisTech.
• Jovanovic, V., Arnoult, T., Zamponi, R., Glabeke, G., Schram, C., Planquart, P., and Toulorge, T., 'Numerical study on the aeroacoustic impact of slat tracks in a high-lift wing configuration', Cenaero.
• Schneider, S., Graf, B., Refik, E., and Giese, T., 'Advanced practical gearbox nvh analyses: an engineering guide', Ulm University of Applied Sciences.
• Santos, V. M. d. S., Sales, T. d. P., and Ouisse, M., 'A modified generalized bloch-mode synthesis for the efficient modeling of periodic structures using the wave-based finite element method', Aeronautics Institute of Technology.
• Chappell, D. J., 'A superconvergent convolution quadrature method for time-dependent dynamical energy analysis', Nottingham Trent University.
• Paroissien, J., Lardeur, P., and Oudjene, M., 'Finite element models for laminated timber structures using solid, solid-beam and solid-shell approaches', Université de Technologie de Compiègne, Université Laval.
• Pagonas, A., Radtke, L., Torre, M., Hughes, T. J. R., Düster, A., Sangalli, G., and Reali, A., 'Immersed iga and mass lumping for explicit dynamics of 1d structural elements', University of Pavia.
• Bizzarri, D., van Ophem, S., Beriot, H., and Atak, O., 'Enhancing digital twin development through advanced vibroacoustic modeling techniques', Siemens Industry Software NV.
• Bruzzone, F., and Rosso, C., 'The importance of damping in nonlinear gear meshing simulations', Politecnico di Torino.
• Viale, L., Daga, A. P., Fasana, A., and Garibaldi, L., 'Optimization of irregular-shaped resonant plates for pyroshock testing in the aerospace industry', Politecnico di Torino.
• Farkas, M., Erdelyi, J. A., and Ha, M. L., 'Automated comparison of product sounds – a digital twin approach to jury testing', Robert Bosch Kft.
• Zullo, L., Li, Y., Beriot, H., Berzi, L., and Baldanzini, N., 'Parametric model for emulating absorbing infinite plane in pass-by noise simulations', University of Florence.
• Palmieri, M., Cianetti, F., Slavič, J., and Braccesi, C., 'Fast evaluation of kurtosis and skewness by modal decomposition for fatigue analysis in frequency domain under non-gaussian random loads', University of Perugia.

Uncertainty in structural and system dynamics

• Dodt, M. B., Bogaerts, L., Persoons, A., Faes, M. G. R., and Moens, D., 'A multifidelity framework for grey-box modelling of automated welding processes', Flanders Make @ KU Leuven.
• Pires, A. V., Moustapha, M., Marelli, S., and Sudret, B., 'New insights on reliability analysis for stochastic simulators using surrogate models', ETH Zurich.
• Boukadia, R. F., Pillot, Y., Deckers, E., and Desmet, W., 'Quantifying the impact of variability on locally resonant metamaterial performance through reduced order modeling', Flanders Make @ KU Leuven.
• Bouras, A., and Carassale, L., 'Analytic derivatives of finite element matrices with respect to geometry', Università di Genova.
• Depaola, M., De Gregoriis, D., Jouan, G., Bornoff, R., Atak, O., Vandevelde, B., and Moens, D., 'Thermal virtual sensing for electronic components and systems: exploring the robustness of kalman filtering', Siemens.
• Hughes, A., Worden, K., Dervilis, N., and Rogers, T., 'Cost-informed dimensionality reduction for structural digital twin technologies', The University of Sheffield.
• Li, P., Zhao, Y. G., Dang, C., Broggi, M., Valdebenito, M. A., and Faes, M. G. R., 'Bayesian updating of conditional failure probability using method of moments', TU Dortmund.
• Maier, S., Bachmann, F., and Feldmann, R., 'Comparison of neural network-based surrogate model and subset simulation for reliability analysis of components submitted to vibrational loads', BMW AG.
• M. S. Ribeiro, L. H., Claeys, C., T Fabro, A., Chronopoulos, D., and F. Arruda, J. R., 'Designing phononic crystals robust against mechanical property variability using statistical data from statistical process control', University of Campinas.
• Shariatmadar, K., Wang, K., R. Hubbard, C., Hallez, H., and Moens, D., 'An introduction to optimization under uncertainty - survey', KU Leuven.
• Könecke, T., and Hanss, M., 'Beyond precision: the power of possibility theory for quantifying imprecise probabilities', University of Stuttgart.
• Aswathy, M., Praveen Krishna, I. R., and Arun, C. O., 'Stochastic meshless methods for free vibration analysis of thin beams, and frames with random material density and young’s modulus', Indian Institute of Technology Delhi.
• Petersen, Ø. W., Lourens, E.-M., and Maes, K., 'On the impact of model errors on input and state estimation in structural dynamic systems', NTNU.
• Colella, G., Lange, V. A., and Duddeck, F., 'A transfer learning framework for crashworthiness analysis based on sphere projection and pointnn', BMW AG.
• Bonnet-Eymard, D., Persoons, A., Gavallas, P., GR Faes, M., Stefanou, G., and Moens, D., 'Physics-informed neural networks to propagate random field properties of composite materials', Flanders Make @ KU Leuven.
• Lindbichler, L., Klanner, M., Melito, G. M., and Ellermann, K., 'Determination and sensitivity analysis of optimal control parameters of actively steered wheelsets', Graz University Of Technology.
• Giro, Y., Le Carrou, J.-L., Vincenti, A., Dartois, S., Viala, R., and Navarret, B., 'Model-based comparison of steel-string acoustic guitars with spruce and composite soundboards', Sorbonne Université.
• Perrin, G., and Soize, C., 'Reconstruction of random fields concentrated on one-dimensional manifold using irregularly sampled data', Université Gustave Eiffel.
• Könecke, T., and Hanss, M., 'Exploring possibilistic potentials in uncertainty quantification for modal analysis techniques', University of Stuttgart.
• Pitchforth, D. J., Jones, M. R., and Cross, E. J., 'Physics-informed gaussian processes - a guide to what physics where?', The University of Sheffield.
• D’Angelo, L., Cirelli, M., Giannini, O., and Valentini, P. P., 'Fuzzy logic assessment of epistemic uncertainties in pseudo-rigid multibody gear models', Unicusano University - Rome.
• Giannoukou, K., Ascia, P., Marelli, S., Duddeck, F., and Sudret, B., 'Exploring multi-fidelity noisy data: methods and real-world examples', ETH Zurich.
• Faraci, A., Beaurepaire, P., and Gayton, N., 'Enhancing reliability-based design optimization through adaptive kriging and gradient-free optimization', Université Clermont Auvergne.
• Brizard, D., and Jacquelin, É., 'An examination of the morris analysis in the context of global sensitivity analysis of car crashworthiness with a toy car model', Université Gustave Eiffel.
• Persoons, A., and Moens, D., 'Adaptive gaussian process regression for robust design optimization using extreme value indicator distribution', Flanders Make @ KU Leuven.
• Jacquelin, E., Adhikari, S., and Brizard, D., 'Random mode evaluation with polynomial chaos expansion', Université Claude Bernard Lyon 1.
• Misraji, M. A., Valdebenito, M. A., Zhang, X.-Y., and Faes, M. G. R., 'First excursion probability sensitivity by means of domain decomposition method', TU Dortmund University.
• Manque, N. A., Valdebenito, M. A., Moens, D., and Faes, M. G. R., 'A reduced-order model for interval analysis in linear dynamical systems', TU Dortmund University.
• Gan, I., Fichera, S., Bi, S., and Mottershead, J., 'Experimental results from a model updating study with controlled uncertainty', University of Liverpool.
• Ascia, P., and Duddeck, F., 'Enhancing development flexibility: a grey-box strategy for adapting to unforeseen adverse conditions', Technische Universität München.
• Lu, H., Farrokhabadi, A., Rauf, A., Talemi, R., Gryllias, K., and Chronopoulos, D., 'Uncertainty quantification for damage detection in 3d printed pure pla auxetic lattice structure using ultrasonic guided waves and flipout probabilistic convolutional neural network', Flanders Make @ KU Leuven.
• Cicirello, A., 'Machine learning enabled combined parametric and non-parametric uncertainty in vibro-acoustics', University of Cambridge.
• Champneys, M. D., and Rogers, T. J., 'An efficient reversible-jump mcmc scheme for model term selection in dynamic systems', University of Sheffield.
• Jones, M. R., and Cross, E. J., 'On deriving kernels for linear time-dependent systems', The University of Sheffield.
• Mohan Kumar, M. K., and Platz, R., 'Deterministic and probabilistic comparison of the discrepancy between the numerical simulation and experimental test considering passive and active vibration isolation', Deggendorf Institute of Technology.
• Sofi, A., and Genovese, F., 'Combined primary-secondary structures under imprecise seismic excitation', Università Mediterranea di Reggio Calabria.