Ph.D. Dissertations Related to ISMA Topics

To purchase a Ph.D. dissertation, please fill out the purchase form here.
The PhD identification codes can be found in the last column of the table below.

Chronological list of Ph.D. Dissertations

2012

K. VERGOTE Dynamic analysis of structural components in the mid frequency range using the wave based method: non-determinism and inhomogeneities 12D03
T. TOULORGE Efficient Runge-Kutta Discontinuous Galerkin Methods Applied to Aeroacoustics 12D02
J. HELSEN The dynamics of high power density gear units with focus on the wind turbine application 12D01

2011

B. BERGEN Wave based modeling techniques for unbounded acoustic problems 11D07
A. STENTI A non-deterministic modeling and predictive methodology for the NVH behavior of rubber joints 11D90
G. HEIRMAN Model reduction techniques to improve the efficiency of flexible multibody simulations
P. GAJDATSY Advanced Transfer Path Analysis Methods 11D02

2010

M. WITTERS Nonlinear Black-Box Identification and Control of a Semi-Active Damper for Passenger Cars 10D99
B. VAN GENECHTEN Trefftz-based mid-frequency analysis of geometrically complex vibro-acoustic systems - hybrid methodologies and multi-level modelling 10D08
B. STALLAERT Active Structural Acoustic Source Control of Rotating Machinery 10D06
D. BERCKMANS Tools for the Synthesis of Traffic Noise Sources 10D05

2009

J. DE CAIGNY Contributions to the Modeling and Control of Linear Parameter-Varying Systems 09D14
G. PIPELEERS Optimal Linear Controller Design for Periodic Inputs and Extended LMI Characterizations for Linear Stability and Performance 09D09
L. DE OLIVEIRA Active Sound Quality Control: Design Tools and Automotive Applications 09D07
P. KINDT Structure-Borne Tyre/Road Noise Due to Road Surface Discontinuities, 09D06
M. DE MUNCK Efficient optimisation approaches for interval and fuzzy Finite Element Analysis 09D03
M. VERSCHUURE Counterweight balancing of mechanisms using convex optimization techniques 09D02

2008

A. WILLEMS Forming simulation of textile reinforced composite shell structures 08D12
Y. REYMEN 3D high-order discontinuous Galerkin methods for time-domain simulation of flow noise propagation 08D10
Z. JAMALUDIN Disturbance compensation for machine tools with linear motor drives 08D09
H. DE GERSEM Interval component mode synthesis procedure for the dynamic analysis of large FE models 08D07
S. DONDERS Computer-aided engineering methodologies for robust automotive NVH design 08D02

2007

K. SMOLDERS Tracking Control of Continuous-Time Nonlinear Systems: A Model-Based Iterative Learning Approach 07D15
G. RUBIO Numerical methodologies for the determination of noise sources in subsonic flows 07D12
C. VANMAELE Development of a wave based prediction technique for the efficient analysis of low- and mid-frequency structural vibrations 07D11
W. DE ROECK Hybrid methodologies for the computational aeroacoustic analysis of confined, subsonic flows 07D10
G. PINTE Active control of repetitive impact noise 07D9
F. DE CONINCK Multi-axial road reproductions for non-linear road noise models 07D3

2006

J. PEETERS Simulation of dynamic drive train loads in a wind turbine 06D7
B. PLUYMERS Wave based modelling methods for steady-state vibro-acoustics 06D4

2005

D. VAES Optimal static decoupling for multivariable control design 05D7
T. LAUWAGIE Vibration-based methods for the identification of the elastic properties of layered materials 05D6
C. LAUWERYS Control of active and semi-active suspension systems for passenger cars 05D4

2004

B. VAN HAL Automation and performance optimization of the wave based method for interior structural-acoustic problems 04D7
B. DEMEULENAERE Dynamic balancing of reciprocating machinery with application to weaving machines 04D3

2003

W. DEWULF A Pro-Active Approach to Ecodesign : Framework and Tools 03D6
R. BOONEN Development of an active exhaust silencer with acoustical characterization of internal combustion engines 03D5

2002

D. MOENS A non-probabilistic finite element approach for structural dynamic analysis with uncertain parameters 02D3

2001

K. HENRIOULLE Distributed actuators and sensors for active noise control 01D6
I. MOENS On the use and the validity of the energy finite element method for high frequency vibrations 01D2

2000

J. ANTHONIS Design and development of an active horizontal suspension for agricultural spray booms 00D4
P. DE FONSECA Simulation and optimisation of the dynamic behaviour of mechatronic systems 00D1

1998

W. DESMET A wave based prediction technique for coupled vibro-acoustic analysis 98D12
P. VAN DEN BRAEMBUSSCHE Robust motion control of high-performance machine tools with linear motors 98D9
CH. GANSEMAN Dynamic modelling and identification of mechanisms with application to industrial robots 98D4

1997

W. DEHANDSCHUTTER The reduction of structure-borne noise by active control of vibration 97D7

1996

K. DE LANGHE High frequency vibrations: contributions to experimental and computational SEA parameter identification techniques 96D2

1995

S. LAMMENS Frequency response based validation of dynamic structural finite elements modals 95D4
D. TORFS High performance motion control in the presence of structural flexibilities: an engineering approach 95D1

1994

D. OTTE Development and evaluation of singular value analysis methodologies for studying multivariate noise and vibration problems 94D5

1992

SHE TING Active vibration control by eigenstructure assignment 92D6
K. WYCKAERT Development and evaluation of detection and identification schemes for the nonlinear dynamical behaviour of mechanical structures 92D2
J. SWEVERS Linear identification and control of flexible robots 92D1

1990

P. VAN DE PONSEELE 3D-acoustic radiation prediction models based on a numerical solution of the Helmholtz equation 90D4
D. VANDEPITTE Simulation of the fatigue behaviour of dynamically loaded structures 90D3
J. WANG Dynamic modeling of joints. Some applications of experimental modal parameters 90D1

1989

TH. JANTER Construction oriented updating of dynamic finite element models using experimental modal data 89D1

1988

F. LEMBREGTS Frequency domain identification techniques for experimental multiple input modal analysis 88D3

1987

G. DESANGHERE Identification and quantification of noise and vibration sources using frequency response and coherence functions 87D6
W. HEYLEN Optimization of model matrices of mechanical structures using experimental modal data 87D5
H. VAN DER AUWERAER Development and evaluation of advanced measurement methods for experimental modal analysis 87D3
Join the ISMA mailing list Katholieke Universiteit Leuven Departement Werktuigkunde Division PMA