Accepted papers

ISMA 2010

• Keynotes
• 
  
  • Acoustic testing (8)
  • Active Noise Control (7)
  • Active vibration control (21)
  • Adaptronics (9)
  • Aeroacoustics and flow noise (12)
  • Civil applications (7)
  • Condition monitoring - damage detection (27)
  • Damping (13)
  • Dynamics of bridges (15)
  • Dynamics of rotating machinery (10)
  • Dynamic testing: methods and instrumentation (10)
  • Environmental noise mapping (5)
  • Experimental dynamic substructuring (9)
  • FP7 ITN MID-FREQUENCY session – CAE methodologies for mid-frequency
    analysis in vibration and acoustics (6)
  • Inverse methods - load identification (6)
  • Lightweight panels and structures (8)
  • Medium and high frequency techniques (20)
  • Modal testing: methods and case studies (13)
  • Model updating and correlation (9)
  • Monitoring and diagnostics of rotating machinery (19)
  • Multi-body dynamics and control (7)
  • Non-linearities: identification and modelling (15)
  • Operational modal analysis (9)
  • Parameter estimation and identification (6)
  • Railway dynamics and ground vibrations (12)
  • Self-excited vibrations (6)
  • Smart structures (10)
  • Substructuring and coupling (4)
  • Transfer path analysis and source identification (6)
  • Tyre/road noise and experimental validation (11)
  • Uncertainties in structural dynamics and acoustics (7)
  • Vehicle concept modelling (8)
  • Vehicle dynamics (7)
  • Vehicle noise and vibration (NVH) (17)
  • Vibration isolation and nano-positioning (4)
  • Vibro-acoustic modelling and prediction (24)
  • Wind turbine vibrations (4)

USD 2010

• Accepted papers (38)

Keynotes

Silent trains for the future, an industrial approach for low noise design
Siv Leth, Center of Competence Acoustics and Vibration, Bombardier Transportation, Sweden

Signal Decomposition for Symptom Enhancement : A journey from Fourier analysis through time/frequency analysis to blind source separation
Bob Randall, School of Mechanical and Manufacturing Engineering, University of New South Wales, Australia.

Acoustic testing

201 Development and application of a new method for the in-situ measurement of sound absorption.
Ysbrand Wijnant, Erwin Kuipers, Andre de Boer, University of Twente, Netherlands

202 Modal analysis of a grand piano soundboard
Giacomo Squicciarini, Roberto Corradi, Politecnico di Milano, Italy

443 Bayesian focusing: a unified approach to inverse acoustic radiation
Jerome Antoni, University of Technology of Compiegne, France

474 On the variations of acoustic absorption peak with particle velocity in Micro-Perforated Panels at high level of excitation
Rostand TAYONG, LRMA ISAT , France
Thomas Dupont, Philippe Leclaire, LRMA ISAT, France

502 NOISE CHARACTERISATION OF PULSATING HYDRAULIC SOURCES
Goran Pavic, Fabien Chevilotte, INSA Lyon, France

607 Experimental analysis of the Very Near Field produced by different acoustic sources
Leonardo Soria, Valeria Cecilia Belgiovine, Politecnico di BARI, Italy
Pieter Aarnoutse, LMS International n.v., Belgium
Herman Van der Auweraer, LMS International, Belgium
Karl Janssens, LMS International n.v., Belgium

635 Development of sound quality stabilization method of multi function peripheral
Takeshi Toi, Sho Shirakata, Masao Yamguchi, Nobuyuki Okubo, Chuo University, Japan

684 Determination of the acoustic damping characteristics of an annular tail-pipe
Rene Boonen, Paul Sas, Eric Vandenbulck, K.U.Leuven, Belgium

Active Noise Control

204 POSTER Smart materials to reduce noise radiated by a flat structure: Active and semiactive approaches
Olatz Adarraga, INASMET-Tecnalia, Spain
Miguel Seco, INASMEt-Tecnalia, Spain
Unai Morales, Francisco Javier Estensoro, INASMET, Spain
Nieves Murillo, INASMET-Tecnalia, Spain

210 ON EFFECTIVENESS OF SUBARRAY ADAPTIVE BEAMFORMING FOR SUPPRESSING NEAR-FIELD MOVING NOISE
Chaoying Bao, The university of Western Australia, Australia

214 Virtual sensors for local, three dimensional, broadband multiple-channel active noise control and the effects on the quiet zones
Paul Booij, Arthur Berkhoff, TNO, Netherlands

230 Review and future perspectives on Active Sound Quality Control
Leopoldo de Oliveira, University of Sao Paulo, Brazil

403 A novel design strategy for iterative learning control based on approximate fuzzy data model (AFDM) for active noise control: Theoretical background
Maria Dolores Redel-Macias, David Santamaría-García, Antonio J. Cubero-Atienza, University of Cordoba, Spain

447 Active Absorber with variable resonance frequency for acoustic control
OLIVIER CHERRIER, VALERIE BUDINGER, ISAE (Institut Supérieur de l’Aéronautique et de l’Espace), France
FRANK SIMON, ONERA (Office national d’Etudes et de Recherches Aérospatiales), France

612 An experimental investigation of a hybrid active/passive panel for increased transmission loss at low frequencies
Andre Goldstein, Diego Azevedo Siviero, José Roberto de França Arruda, Sérgio Souza, Lucas Coser, Universidade Estadual de Campinas, Brazil

Active vibration control

16 A new method to optimize the Current Flowing technique to the purposes of semi-passive multi-modal vibration reduction
Alfredo Cigada, Stefano Manzoni, Politecnico di Milano, Italy
Matteo Redaelli, Agusta Westland, Italy
Marcello Vanali, Politecnico di Milano, Italy

37 Iterative Learning Control of the filling phase of wet clutches
Gregory Pinte, Flanders' Mechatronics Technology Centre, Belgium
Bruno Depraetere, KULeuven, Belgium
Wim symens, Flanders' Mechatronics Technology Centre, Belgium
Jan Swevers, KULeuven, Belgium
Paul Sas, K.U.Leuven, Belgium

110 Modeling and analysis of laminate composite plates with embedded active-passive piezoelectric networks
Tatiane C. Godoy, Marcelo A. Trindade, University of Sao Paulo, Brazil

115 Pole Assignment for Asymmetric Systems Using State-feedback with Time Delay
Huajiang Ouyang, University of Liverpool, United Kingdom
Kumar Vikram Singh, Miami University, United States

184 Theoretical analysis and experimental validation of a switchable stiffness system for shock isolation.
Diego Francisco Ledezma-Ramirez, Universidad Autónoma de Nuevo León, Mexico
Neil Ferguson, Michael Brennan, University of Southampton, United Kingdom

191 Control laws for chatter suppression in milling using an inertial actuator
Aitor Bilbao-Guillerna, Asier Barrios, Jokin Munoa, IDEKO, Spain
Nicolax Loix, Micromega Dynamics, Belgium
Iker Mancisidor, IDEKO, Spain

208 Robust Control of a Two-Floors Building Model using Active Mass Driver
Gustavo Abreu, Vicente Lopes Jr., Faculdade de Engenharia de Ilha Solteira - UNESP, Brazil
Michael Brennan, University of Southampton, United Kingdom

249 COMPENSATION FILTER FOR FEEDBACK CONTROL UNITS WITH PROOF-MASS ELECTRODYNAMIC ACTUATORS
Jens Rohlfing, Stephen Elliott, University of Southampton, United Kingdom
Paolo Gardonio, Universita degli Studi di Udine, Italy

259 Stability and performance limits for the active vibration isolation on a 2 DOF system using a reactive force actuator and velocity feedback
Neven Alujevic, LBF Fraunhofer and FESB-University of Split, Germany
Hinko Wolf, FSB-University of Zagreb, Croatia
Paolo Gardonio, Universita degli Studi di Udine, Italy

384 Theoretical and Experimental Analysis of a Tuneable Vibration Absorber using Acceleration and Displacement Feedback
Neven Alujevic, LBF Fraunhofer and FESB-University of Split, Germany
Ivan Tomac, FESB-University of Split, Croatia
Paolo Gardonio, Universita degli Studi di Udine, Italy

417 A Multichannel Active-Adaptive Vibration Control System applied to an Aeronautical Structure
Joao Marra, Paulo Paupitz, Luiz Goes, Instituto Tecnológico de Aeronáutica, Brazil

437 Model Predictive Control of Motion and Vibration Suppression of Parallel Machine with Active Platform
Zbynek Sika, Petr Svatos, Michael Valasek, CTU in Prague, FME, Czech Republic

438 Vibration Control of Flexible Aircraft with Respect to Passengers Comfort
Zbynek Sika, Petr Zuziak, Michael Valasek, CTU in Prague, FME, Czech Republic

465 The Receptance Method in Partial Pole Placement of Structures
Maryam Ghandchi Tehrani, Robin Elliott, University of Liverpool, United Kingdom
John E Mottershead, Univeristy of Liverpool, United Kingdom

466 Noise and vibration attenuation of a circular saw blade with applied piezoceramic patches and negative capacitance shunt networks
Martin Pohl, Deutsches Zentrum für Luft- und Raumfahrt e.V., Germany

472 Comparison of active and passive modes of piezoelectric patch actuators for scaled helicopter rotor blade vibration suppression
Sergey Shevtsov, South Center of Russian Academy, ROSTVERTOL Helicopter Production, Russian Federation
Demosthenes Tsahalis, University of Patras, Greece
Michail Flek, Ivan Samochenko, ROSTVERTOL Helicopter Production, Russian Federation
Vladimir Acopyan, Institute of Mechanics and Applied Mathematics, Russian Federation

481 Design of an Active 3DOF Stiffness/Damping Element
El-said Mohamed , KUL Mechanical Departement, Belgium

508 A case study towards the application of NMPC to a continuously variable semi-active suspension
Maarten Witters, Jan Swevers, KULeuven, Belgium

551 Dynamic characterisation of different magneto-sensitive natural rubbers for application in vibration isolation
Ane Alberdi, Nere Gil-Negrete, Jordi Vinolas, CEIT and TECNUN (University of Navarra), Spain
Leif Kari, KTH, Sweden
F. Javier Nieto, CEIT, Spain

669 The concept of ‘dynamic materials’ and active control of vibrations of sandwich plates
Sergey Sorokin, Aalborg University, Denmark

674 Discrete versus distributes ASAC actuator: a numerical study
Daniele Ghiglione, KUL, Belgium
Leopoldo de Oliveira, University of Sao Paulo, Brazil
Wim Desmet, K.U.Leuven, Belgium

Adaptronics (special session, prof. T. Bein)

439 An Operational Modal Analysis approach for the performance assessment of passenger car active suspension systems
Leonardo Soria, Politecnico di BARI, Italy
Arnaldo delli Carri, Università degli Studi di BRESCIA, Italy
Bart Peeters, Jan Anthonis, Herman Van der Auweraer, LMS International, Belgium

457 Active Sound Quality Control of Vehicle Interior Sound
Marco Gallo, Yuta Komiya, Karl Janssens, Jan Anthonis, Herman Van der Auweraer, LMS International, Belgium
Leopoldo de Oliveira, University of Sao Paulo, Brazil

580 An Approach to Control the Stability in an Active Load-Carrying Beam-Column by One Single Piezoelectric Stack Actuator
Georg Enss, TU Darmstadt, Germany
Roland Platz, Fraunhofer-Institute of Structural Durability and System Reliability LBF, Germany
Holger Hanselka, TU Darmstadt, Germany

632 Modelling of an Active Mounted Plate by means of the Superposition of a Rigid Body and an Elastic Model
Torsten Bartel, Fraunhofer-Institut für Betriebsfestigkeit und Systemzuverlässigkeit LBF , Germany
Heiko Atzrodt, Fraunhofer Institute for Structural Durability and System Reliablity LBF, Germany
Sven Herold, Fraunhofer Institute for Structural Durability and System Reliablity LBF , Germany
Tobias Melz, Fraunhofer Institute for Structural Durability and System Reliablity LBF, Germany

634 Development of new lead-free piezoceramics for actuator applications
Eva-Maria Anton, Wook Jo, TU Darmstadt, Germany
Dragan Damjanovic, EPFL, Lausanne, Switzerland
Jürgen Rödel, TU Darmstadt, Germany

658 Approaches for distributed active and passive vibration compensation
Sven Herold, Fraunhofer Institute for Structural Durability and System Reliablity LBF , Germany
Dirk Mayer, Fraunhofer Institure for Structural Durability and System Reliability LBF, Germany
Michael Kauba, Thorsten Koch, Fraunhofer Institute for Structural Durability and System Reliablity LBF, Germany

659 Electret transducers for measuring acceleration and structure-borne sound
Joachim Hillenbrand, Sebastian Haberzettl, Tilman Motz, Gerhard M. Sessler, Technische Universität Darmstadt, Germany

662 Adaptive multichannel control of time-varying broadband noise and vibrations
Arthur Berkhoff, TNO Science and Industry, Netherlands

666 Implementation and Characterisation of the Dynamic Behaviour of a Three-dimensional Truss Structure for Testing Smart Devices
David Flaschenträger, Fraunhofer Institute for Structural Durability and System Reliablity LBF, Germany
Jacqueline Rausch, Technische Universität Darmstadt, Germany
Heiko Atzrodt, Jennifer Thiel, Fraunhofer Institute for Structural Durability and System Reliablity LBF, Germany
Roland Werthschützky, Technische Universität Darmstadt, Germany
Holger Hanselka, TU Darmstadt, Germany
Sven Herold, Fraunhofer Institute for Structural Durability and System Reliablity LBF , Germany
Tobias Melz, Fraunhofer Institute for Structural Durability and System Reliablity LBF, Germany

Aeroacoustics and flow noise

7 Low frequency range response of a plate to different turbulent boundary layer excitation models
Sergio De Rosa, Francesco Franco, Università degli Studi di Napoli "Federico II", Italy

81 Reduction of Motor Fan Noise using CFD-CAA Simulations
S Rama Krishna, S.V.P. College of Engineering, Visakhapatnam, Andhrapredesh, India, India
A Rama krishna, Andhra Uneversity, India
K Ramji, Andhra uneversity, India

97 Innovative Computational Aeroacoustic Approach for Automotive Exhaust Systems
Julien Caradonna, Olivier Schwartz, Faurecia Emissions Control Technologies, France
Paolo di Francescantonio, STS, Scientific and Technical Software, Italy

311 Near-Field Cavity Aeroacoustics using Large-Eddy Simulation
Orhan Aybay, CD-adapco, Germany
Martin Jurisch, Technical University of Dresden, Germany
Sven Enger, CD-adapco, Germany

313 Implementation and Validation of an Aeroacoustics Noise Sources Identification System on São Paulo University Closed Circuit Wind-tunnel
Leandro Dantas de Santana, K.U.Leuven, Belgium
Fernando Catalano, Marcello Medeiros, São Paulo University, Brazil

319 Noise sources identification and aerodynamic correlations on a three dimensional wing with flap
Leandro Dantas de Santana, K.U.Leuven, Belgium
Renato Cosin, Fernando Catalano, São Paulo University, Brazil

488 Simplified exhaust pipe noise radiation modeling using DG and FPS techniques
Maarten Hornikx, Wim De Roeck, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

501 Single tone excitation techniques for determination of non-linear acoustic properties of perforates
Hans Bodén, Armin Eslami, KTH, Sweden

568 Equations for Sound Propagation in Non-Uniform Flows Solved with the Discontinuous Galerkin Method
Thomas Toulorge, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

575 Active two-port modeling for the aero-acoustic characterization of duct systems using a hybrid SNGR methodology
Bart Vanelderen, K.U.Leuven, Belgium
Wim De Roeck, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

672 Aeroacoustic sources identification using generalized inverse beamforming
Paulo Zavala, KUL, Belgium

690 A Geometrical Near-Field Extension of Amiet’s Theory for Incoming Turbulence Noise and Broadband Noise Scattering
Korcan Kucukcoskun, LMS International, Belgium
Julien Christophe, Christophe Schram, Von Karman Institute for Fluid Dynamics, Belgium
Michel Tournour, LMS International, Belgium
Jerome Anthoine, ONERA, France

Civil applications

22 Operational Modal Analysis in presence of dynamic interaction among adjacent buildings - an assessment
Carlo Rainieri, Giovanni Fabbrocino, University of Molise, Italy
Gaetano Manfredi, University of Napoli Federico II, Italy
Mauro Dolce, Department of Civil Protection, Italy

143 Comparison of linear and nonlinear static and dynamic behaviour of prestressed and non-prestressed concrete slab elements
Jean Mahowald, Volker Bungard, Daniéle Waldmann, Stefan Maas, Arno Zuerbes, University of Luxembourg, Luxembourg
Guido De Roeck, K.U. Leuven, Belgium

144 Study of the vibrating stationary state of a sheet pile during a vibratory pile driving
Vincent Hanus, University of Luxemboug, Luxembourg

157 Dynamic characterization of the Basilica of Maxentius in Rome
Annamaria Pau, Fabrizio Vestroni, Sapienza Università di Roma, Italy

328 FINITE ELEMENT ANALYSIS OF GROUND BORNE VIBRATION IN SENSITIVE BUILDING USING INPUT FROM FREE FIELD MEASUREMENT
Tuan Norhayati Tuan Chik, James Mark William Brownjohn, Mihail Petkovski, University of Sheffield, United Kingdom

423 Analysis of microtremor measurements: looking for alternatives to Nakamura’s technique
Carlo Rainieri, Arindam Dey, Filippo Santucci de Magistris, Giovanni Fabbrocino, University of Molise, Italy

526 Seismic Damage Assessment for a Residential Masonry Building Using Aftershock Monitoring of Wenchuan Earthquake
Wensong Zhou, Hui Li, Harbin Institute of Technology, China
Laurent Mevel, Michael Döhler, Binh Xuan Lam, INRIA, France
Chenxi Mao, China Earthquake Administration, China
Jinping Ou, Dalian University of Technology, China

Condition monitoring - damage detection

4 Identification of Dynamic Loads Generated by Trains in Motion using Piezoelectric Sensors
Krzysztof Sekula, Przemyslaw Kolakowski, Institute of Fundamental Technological Research, Poland

6 STFT and JTFA Analyses of Vibroacoustic Signal for the On-Line Combustion Process Assessment in Direct Injection Turbocharged Diesel Engines
Jerzy Merkisz, Marek Waligórski, Poznan University of Technology, Poland

8 The Effect of Lateral Quasi-Static loading on Damage Indexes Based on Modal Parameters of Retrofitted RC Frame Model
Atiwat Vimuttasoongviriya, Naveen Kwatra, Maneek Kumar, Thapar University, India

10 Damage Localisation in a Beam-type Structure from Simulated and Experimental Measurements
Ummul Baneen, Nathan M. Kinkaid, Jose E. Guivant, University of New South Wales, Australia
Israel Herszberg, Composites CRC (CRC-ACS), Australia

24 An approximate technique for damage identification in beams using shifts in natural frequencies
Elma Ekinovic, University of Zenica, Bosnia and Herzegowina

35 Vibration based health monitoring for a lightweight truss structure: a comparative assessment of several statistical time series methods
Fotis Kopsaftopoulos, Spilios Fassois, University of Patras, Greece

36 Advanced Aspects of Mode-Selective Excitation of Ultrasonic Guided Waves
Jochen Moll, Claus-Peter Fritzen, University of Siegen, Germany

69 Interaction of Multiple Circular Holes and a Linear Crack by SH-wave
Hongliang Li, Harbin Engineering University, China

91 MODEL OF TURBOMACHINE CASING VIBRATION AND ITS APPLICATION TO CONDITION MONITORING
Aleksey Mironov, Pavel Doronkin, D un D centrs, Latvia

148 Efficient Frequency Analysis for Wireless Structural Health Monitoring Systems
John Penny, Aston University, United Kingdom
Michael Friswell, Swansea University, United Kingdom
Daniel Inman, University of Bristol, United Kingdom

159 Shaft crack detection in a steam turbine: experimental evidences and model-based simulations
Andrea Vania, Paolo Pennacchi, Politecnico di Milano, Italy

205 Detection, identification, and quantification of sensor fault
Jyrki Kullaa, Aalto University, Finland

219 Damage localisation using various signal filtering approaches
Tomasz Wandowski, Institute of Fluid-Flow Machinery PASci, Poland
Pawel Malinowski, Wieslaw Ostachowicz, Institute of Fluid–Flow Machinery PASci, Poland

238 Comparison of subspace analysis methods for fault detection in industrial systems
Viet Ha Nguyen, Christophe Rutten, Jean-Claude Golinval, University of Liège, Belgium

300 EMA-FEA DAMAGE DECTION IN MOTORCYCLE COMPONENT
FRANCESCA GARESCI, UNIVERSITY OF MESSINA, Italy
FRANCESCO PETRONE, UNIVERSITY OF CATANIA, Italy

317 Health monitoring of off-shore wind energy power plant with use of adaptive modal filter
Krzysztof Mendrok, AGH University of Science and Technology, Poland
Tadeusz Uhl, AGH - University of Science and Technology, Poland

352 An Approach to Quantify the Influence of Uncertainties in Model-based Usage-Monitoring of Load-Carrying Systems
Jan Felix Koenen, TU Darmstadt, Germany
Roland Platz, Fraunhofer-Institute of Structural Durability and System Reliability LBF, Germany
Holger Hanselka, TU Darmstadt, Germany

394 Damage location using added masses in a Piper Tomahawk aircraft wing.
Evangelos Papatheou, Graeme Manson, Rob Barthorpe, Keith Worden, University of Sheffield, United Kingdom

401 Crack Detection in Mistuned Repeating Structures
Anees ur Rehman, Department of Mechanical Engineering,University of Sheffield, United Kingdom
Jem Rongong, The University of Sheffield, United Kingdom
Keith Worden, University of Sheffield, United Kingdom

412 Damage detection in vibration signals using non parametric time-frequency representations
oscar cardona-morales, lina maria sepulveda-cano, german castellanos-dominguez, Universidad Nacional de Colombia, Colombia

421 Multimodal statement networks for diagnostic applications
Wojciech Cholewa, Silesian University of Technology, Poland

527 Damage detection in time-varying systems by means of the PCA method
Andrea Bellino, Luigi Garibaldi, Alessandro Fasana, Stefano Marchesiello, Politecnico di Torino, Italy

542 A modal approach to identify fatigue damage in threaded connections of large scale tubular structures.
TienThanh Bui, Guido De Roeck, K.U. Leuven, Belgium
Jeroen Van Wittenberghe, Patrick De Baets, Wim De Waele, Ghent University, Belgium

549 A piezoelectric paint thick-film strain sensor for vibration monitoring purposes
Ismael Payo, University of Castilla La Mancha (Spain), Spain
Jack Hale, University of Newcastle Upon Tyne (UK), United Kingdom

554 Vibration based structural health monitoring of a composite plate with stiffeners
Richard Loendersloot, Ted Ooijevaar, Andre De Boer, Remko Akkerman, Laurent Warnet, University of Twente, Netherlands

574 Time-domain analysis of pre-lockup torsional vibrations for condition monitoring of a wet friction clutch
Agusmian Partogi Ompusunggu, Mechanical Engineering Department, KULeuven, Belgium
Paul Sas, K.U.Leuven, Belgium

597 Vibrational techniques to assess the stability of spherical press-fitted implants : preliminary results
Leonard Pastrav, Groep T, Belgium
Steven Leuridan, K.U. Leuven, Belgium
Kathleen Denis, Groep T, Belgium
Hendrik Delport, AZ Waasland, Belgium
Philippe Debeer, UZ Pellenberg, Belgium
Lieven De Wilde, UZ Gent, Belgium
Georges Van der Perre, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium
Jos Vander Sloten, K.U. Leuven, Belgium

Damping

9 Friction dynamic with elasto-plasticity in transient behavior
Michael Ruderman, RST, TU-Dortmund, Germany
Frank Hoffmann, Torsten Bertram, Technische Universität Dortmund, Germany

64 Nonlinear static and dynamic properties of Metal Rubber dampers
Hong Wang, Beijing University of Aeronautics and Astronautics, China
Jem Rongong, Geoffrey Tomlinson, The University of Sheffield, United Kingdom
Jie Hong, Beijing University of Aeronautics and Astronautics, China

104 Linear Friction Damper Consisting of Cylindrical Friction Block and Inclined Lever (Investigation of Fundamental Property)
Hideya Yamaguchi, Hidehisa Yoshida, National Defense Academy, Japan

125 Design Procedure of a Nonlinear Vibration Absorber : Enhancement of the Amplitude Robustness
Régis Viguié, Gaëtan Kerschen, University of Liège, Belgium

160 Avoiding of clutch excited judder using an active clamping force control
Albert Albers, Michael Meid, KIT - Karlsruhe Institute of Technology, Germany

163 Is damping additive? On the accumulated effect of interface damping and material damping.
Krister Dovstam, Peter Göransson, KTH Aeronatical & Vehicle Engineering, Sweden

362 Feasibility of nonlinear absorbers for transient vibration reduction
Frits Petit, Mia Loccufier, Dirk Aeyels, Ghent University, Belgium

376 Using modal damping for full model transient analysis. Application to pantograph/catenary vibration.
Jean-Philippe Bianchi, SDTools, France
Etienne Balmès, SDTools, Arts et Metiers ParisTech, France
Guillaume Vermot des Roches, SDTools, Ecole Centrale Paris, France
Adrien Bobillot, SNCF, France

398 Damping Identification with Finite Integration Method Similar to the Continuous Wavelet Transform
Janko Slavic, Miha Boltezar, Faculty of Mech Eng, Univ of Ljubljana, Slovenia

409 An internal damping in epoxy composite systems
Dora Kroisova, Technical University of Liberec, Czech Republic

426 Experimental investigation of damping flexural vibrations using two-dimensional acoustic 'black holes'
Elizabeth Bowyer, Daniel O'Boy, Victor Krylov, Loughborough University, United Kingdom
Francois Gautier, Université du Maine, France

582 A rubber mount model. Application to automotive equipment suspension
Benjamin THOMAS, VALEO, France
Lionel MANIN, INSA Lyon, France
Philippe Goge, VALEO, France
Régis DUFOUR, INSA Lyon, France

633 IDENTIFYING SLIP-SLAP FORCES IN THE CONTACT INTERFACE USING DUAL-MODE EXCITATION
Fatemeh Pourahmadian, Hamid Ahmadian, Hassan Jalali, Iran University of Science and Technology, Iran (Islamic Republic of)

Dynamics of bridges

133 PI-57 bridge: monitoring the effects of temperature variation on modal parameters
Alexandre Cury, Laboratoire Central des Ponts et Chaussées, France
Christian Cremona, Ministère de l'Écologie, de l'Energie, du Développement durable et de la Mer, France

142 Ambient Vibration and Forced Excitation Tests of a Composite Bridge: Environmental influences and nonlinear effects on the dynamic properties
Volker Bungard, Jean Mahowald, Daniéle Waldmann, Stefan Maas, Arno Zuerbes, University of Luxembourg, Luxembourg
Guido De Roeck, K.U. Leuven, Belgium

147 Destructive testing of a bridge to compare the calculated response of the model to verify predictive capabilities
Kurt Veggeberg, National Instruments, United States

156 Damage localization in bridges using multi-scale filters and large strain sensor
Arnaud DERAEMAEKER, Universite Libre de Bruxelles, Belgium
Gilles Tondreau, Université Libre de Bruxelles, Belgium

162 Temperature Effects on Modal Variability of a Stress-Ribbon Footbridge under Operational Conditions
Wei-Hua Hu, Faculty of Engineering of University of Porto, Portugal
Cardoso, A., Faculy of Engineering of University of Porto, Portugal
Caetano, E., Cunha, A., Faculty of Engineering of University of Porto, Portugal

302 DAMAGE ASSESSMENT OF A BRIDGE UNDER VARYING ENVIRONMENTAL CONDITIONS
Viviana Meruane, Ward Heylen, Katholieke Universiteit Leuven, Belgium

312 Identification of suspension bridge parameters under operational loads
Joanna Iwaniec, Marek Iwaniec, Piotr Kurowski, AGH - University of Science and Technology, Poland

395 Maximum resonance and cancellation phenomena in elastically-supported beams and its application to railway bridges under High-Speed traffic
Maria D. Martinez-Rodrigo, Alejandro Doménech, Universitat Jaume I, Spain
Pedro Museros, Universidad ed Granada, Spain

425 Methodology to evaluate materials properties and structural answer of a steel railway bridge
Leonardo Lago, Paulo Salvador Nigro, University of São Paulo, Brazil
Leandro Trautwein, UFABC, Brazil
Tulio Bittencourt, University of São Paulo, Brazil

435 The influence of temperature varying material parameters on the dynamic behaviour of short span railway bridges
Volkmar Zabel, Maik Brehm, Bauhaus-University Weimar, Germany
Susanne Nikulla, Bauhaus-Universität Weimar, Germany

459 Long-term monitoring and data analysis of the Tamar Bridge
Elizabeth Cross, Ki-Young Koo, James Mark William Brownjohn, Keith Worden, University of Sheffield, United Kingdom

478 THE EFFECT OF DECK PARAMETERS ON OUT-OF-PLANE VIBRATIONS OF A STAY-BRIDGE CABLE
MARIA ROSARIA MARSICO, David Wagg, Simon Neild, University of Bristol, United Kingdom

535 Vibration serviceability of footbridges: a comparative study of 3 design methodologies
Katrien Van Nimmen, Katholieke Universiteit Leuven, Belgium
Peter Van den Broeck, Bram Gezels, Katholieke Hogeschool Sint-Lieven, Belgium
Guido De Roeck, K.U. Leuven, Belgium

576 Iterative procedures for the uncoupled analysis of vehicle-bridge dynamic interaction
Anna Feriani, University of Brescia, Italy
Maria Gabriella Mulas, Leandro Candido, Politecnico di Milano, Italy

590 Continuous Dynamic Monitoring of an arch bridge: strategy to eliminate the environmental and operational effects and detect damages
Filipe Magalhães, Álvaro Cunha, Elsa Caetano, Faculty of Engineering of the University of Porto, Portugal

Dynamics of rotating machinery

47 Modelling a Rotating Shaft as an Elastically Restrained Bernoulli-Euler Beam
T.A.N. Silva, Instituto Superior de Engenharia de Lisboa, Portugal
Nuno Maia, Instituto Superior Tecnico, Portugal

135 On the identification of foundations in rotating machinery using modal parameters
L.U. Medina, Universidad Simón Bolívar, Venezuela
N. Feng, Eric Hahn, University of New South Wales, Australia

212 Dynamic Model of Reciprocating Compressors with Vertical Axis and Flexible Bearings
Paulo Kurka, Jaime Izuka, UNICAMP - Universidade Estadual de Campinas, Brazil

332 Influence of rotor-shaft material damping on modal and directional frequency response characteristics
Manoj Chouksey, Subodh V. Modak, Jayanta Kumar Dutt, IIT, Delhi, India

351 Control of Flexible Rotor Vibration using Electromagnetic Actuator Based on Active Disturbance Rejection Technique
Anindya Sundar Das, National Institute of Technology Rourkela, India
Jayanta Kumar Dutt, IIT, Delhi, India

361 A reduced order model based on sector mistuning for the dynamic analysis of mistuned bladed disks
Paolo Vargiu, Christian M. Firrone, Stefano Zucca, Muzio M. Gola, Politecnico di Torino, Italy

386 Reduced models identification from experimental modal analysis of non-self adjoint systems – rotordynamics, active control and vibroacoustics applications
Morvan Ouisse, Emmanuel Foltête, FEMTO-ST Institute, France

485 Accounting for rotation in a multi-stage cyclo-symmetric model – a case study
Etienne Balmes, SDTools & Arts et Metiers ParisTech, France
Izhak Bucher, Technion- Israel Inst. of Technology, Israel

499 Unbalance Estimation of Rotor Based on Holospectrum
Shi Liu, Guangdong Power Test & Research Institute, China

625 Unbalance Compensation in a Rotor-Bearing System by Dynamic Stiffness Control And Acceleration Scheduling
Gerardo Silva-Navarro, Flavio Lopez-Medina, Alvaro Cabrera-Amado, Centro de Investigacion y de Estudios Avanzados del I.P.N., Mexico

Dynamic testing: methods and instrumentation

128 Evaluation of the Vibration Test Severity by FDS and ERS
Dae Hyeon Cho, Korea Aerospace Industries, LTD., Korea, Republic of

176 Correlation of airbag fabric material mechanical failure characteristic for Out of Position applications
Christophe Bastien, Mike Blundell, D. Stubbs, J. Christensen, Coventry University, United Kingdom
Jörg Hoffmann, Michael Freisinger, Toyoda Gosei Europe NV, Germany
Rob Van Der Made, Tass, Netherlands

234 Derivation of shaker spectra for structural certification from helicopter flight test vibration measurements
Hans van Tongeren, Robert Maas, National Aerospace Laboratory, NLR, Netherlands

294 Shock transmission within a coupled system
Kiran Vijayan, Jim Woodhouse, University of cambridge, United Kingdom

309 Input Sensorless FRF Measurements by Laser Excitation System
Naoki Hosoya, Shibaura Institute of Technology, Japan
Itsuro Kajiwara, Hokkaido University, Japan
Takahiko Hosokawa, Shibaura Institute of Technology, Japan

378 Optical vibration measurement and frequency response analysis on large structures under multiple excitation load conditions
Markus Klein, GOM mbH, Germany
B. Levadoux, ONERA, France
Hagen Berger, GOM mbH, Germany

537 Identification of Piezo-electric Actuators Using a Simple Test Technique
Saad Alkhfaji, Seamus Garvey, University of Nottingham, United Kingdom

557 Using a Graphics Processor to Accelerate DSP Calculations
Jason Blough, Andrew Morello, Michigan Technological University, United States

600 Dynamic characterization of air spring for AVC applications
Luigi Bregant, Marco Spagnol, University of Trieste, Italy

678 Dynamics of constant intension of cable in lunar gravity simulation system
Shichao Fan, Jian Bing, Beijing Institute of Spacecraft Environment Engineering, China

Environmental noise mapping (special session, prof. H. Rice, dr. E.A. King)

564 Evaluation of Noise Levels affecting Schools in Cairo - Egypt
Mona Kamal, The Egyptian Environmental Affairs Agency , Egypt
Reem Abdallah, Egyptian Environmental Affairs Agency, Egypt

645 Self Adaptive Grids for Noise Mapping
C. Asensio, M. Recuero, M. Ruiz, M. Ausejo, I. Pavón, Universidad Politécnica de Madrid, Spain

680 Solving large area noise mapping tasks
Hardy Stapelfeldt, Stapelfeldt Ing. GmbH / SoftNoise GmbH, Germany
Dietmar Siepmann, Stapelfeldt Ingenieurgesellschaft mbH, Germany

682 Evironmental noise mapping using measuements in transit
Gareth Bennett, Eoin King, Henry Rice, Jan Curn, Vinny Cahill, Trinity College Dublin, Ireland
Fabian Bustamante, Northwestern University, United States

683 Exploring LiDAR capabilities to assist in the development of strategic noise maps
Brendan Kennedy, Vincent O'Malley, National Roads Authority, Ireland

Experimental dynamic substructuring (special session, prof. W. D'Ambrogio)

14 The role of interface DoFs in decoupling of substructures based on the dual domain decomposition
Walter D'Ambrogio, Università dell'Aquila, Italy
Annalisa Fregolent, Univesità di Roma La Sapienza, Italy

342 Transfer Dynamics Cancellation in Dynamic Substructuring Tests
Jonathan du Bois, Branislav Titurus, Nick Lieven, University of Bristol, United Kingdom

405 A Substructuring Technique for Impact Response Based on Measured and Computed Impulse Response Functions of Components
Daniel Rixen, Delft University of Technology, Netherlands

406 A Family of Substructure Decoupling Techniques Based on a Dual Assembly Approach
Sven Voormeeren, Daniel Rixen, Delft University of Technology, Netherlands

464 Bias Errors in Driving Point FRFs and their affect in Experimental Dynamic Substructuring
Dennis Klerk, Müller-BBM VAS B.V., Netherlands
Roel Visser, Delft University of Technology, Netherlands

469 Uncertainty in Experimental/Analytical Substructuring Predictions: A Review with Illustrative Examples
Matthew Allen, Daniel Kammer, University of Wisconsin-Madison, United States
Randall Mayes, Sandia National Laboratories, United States

483 Design Studies for the Transmission Simulator Method to Generate Experimental Dynamic Substructures
Randy Mayes, Michael Arviso, Sandia National Laboratories, United States

534 Problems in Using Experimental Data for Dynamic Substructuring of a Lumped Parameter System
Antonio Culla, Università di Roma La Sapienza, Italy
Walter D'Ambrogio, Università dell'Aquila, Italy
Annalisa Fregolent, Univesità di Roma La Sapienza, Italy
Alessandro Schiavone, Università di Roma La Sapienza, Italy

676 Dynamic Substructuring in Metal Cutting Machine Chatter Prediction
Anders Liljerehn, Sandvik Coromant AB, Sweden
Anders Johansson, Thomas Abrahamsson, Chalmers University of Technology, Sweden

FP7 ITN MID-FREQUENCY session – CAE methodologies for mid-frequency analysis in vibration and acoustics

232 Application of the Wave Based Method for Mid-Frequency analysis on a Room Acoustics Case
Onur Atak, K.U Leuven, Belgium
Monika Rychtarikova, K.U.Leuven, Slovakia
Jacobus Huijssen, KU Leuven, Belgium
Bert Pluymers, Wim Desmet, K.U.Leuven, Belgium

304 Stochastic Wave Finite Element: Formulation, Validation and Generalisation
Mohamed Amine BEN SOUF, Ecole Centrale de Lyon, France

346 Non resonant contribution and energy distributions using Statistical modal Energy distribution Analysis (SmEdA)
Rainer Stelzer, Nicolas Totaro, Goran Pavic, INSA Lyon, France
Jean-Louis GUYADER, Laboratoire Vibrations Acoustique INSA-LYON, France
Laurent Maxit, INSA Lyon, France

497 New insights of an energy flow visualization into vehicle design
Giambattista Stigliano, Marcos Souza Lenzi, LMS International, Belgium
Bert Pluymers, K.U.L., Belgium
Patrik Ragnarsson, K.U. Leuven, Belgium
Stijn Donders, Marc Brughmans, LMS International, Belgium

524 Application of WBT for unbounded acoustic radiation problems with an approach for substitution of complex boundary shapes
Islam Elbahnasy, Virtual Vehicle Research and Test Center, Austria
Tamas Mocsai, Petra Silar, Virtual Vehicle (ViF), Austria
Hans-Herwig Priebsch, Virtual Vehicle Research and Test Center, Austria

655 The analysis of random systems with combined parametric and non-parametric uncertainty models.
Alice Cicirello, Robin Langley, University of Cambridge, United Kingdom

Inverse methods - load identification

330 Vibration sources identification using vibratory measurements injected in a local Finite Element Model
Cédric RENZI, Laboratoire Vibrations Acoustique INSA-LYON, France
Charles PEZERAT, Laboratoire d’Acoustique de l’Université du Maine (LAUM), France
Jean-Louis GUYADER, Laboratoire Vibrations Acoustique INSA-LYON, France

446 Estimation of the injected structure-borne sound power using inversely measured contact forces
Pieter Schevenels, Belgian Building Research Institute, Belgium
Peter van der Linden, Qsources BVBA, Belgium
Gerrit Vermeir, K.U.Leuven, Belgium

448 Distributed Force Identification in the wave-number domain
Annalisa Fregolent, Univesità di Roma La Sapienza, Italy
Aldo Sestieri, Sapienza University of Rome, Italy

555 Derivation of the force interaction within strongly coupled systems – application to diesel engine oil pumps
Michaël THIVANT, VIBRATEC, France
Alexandre CARBONELLI, ECOLE CENTRALE, France
Pascal BOUVET, VIBRATEC, France

598 Dynamic force identification by means of state augmentation: a combined deterministic-stochastic approach
Eliz-Mari Lourens, K U Leuven, Belgium
Geert Lombaert, Edwin Reynders, K.U.Leuven, Belgium
Guido De Roeck, K.U. Leuven, Belgium
Geert Degrande, K.U.Leuven, Belgium

614 In-situ characterisation of structure borne sound from a building mounted wind turbine
Andrew Elliott, Andy moorhouse, University of Salford, United Kingdom

Lightweight panels and structures (special session, prof. S. De Rosa)

283 LIGHTWEIGHT METAL TO METAL BONDED ALUMINIUM PANELS ACOUSTIC DESIGN
Gennaro Pagnozzi, Piaggio Aero Industries S.p.A., Italy

343 Static and dynamic testing of the full scale helicopter rotor blades
Marcin Luczak, Bart Peeters, Kajetan Dziedziech, LMS International, Belgium

479 Vibrational and acoustical characterization of tanks and fuel pumps employed in the automotive field
Gennaro Scarselli, University of Salento, Italy
Leonardo Lecce, University of Naples, Italy
Francesco Fortunato, Luigi Di Matteo, Elasis Scpa, Italy

486 OPTIMIZED NUMERICAL EVALUATION OF THE INSERTION LOSS OF LIGHTWEIGHT TORHEX SANDWICH PANELS
Marianna Vivolo, Bert Pluymers, K.U.L., Belgium
Dirk Vandepitte, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

593 Design and implementation of a transmission suite in order to characterise the vibro-acoustic properties of lightweight materials and structures
Cristobal Gonzalez Diaz, Katholieke Universiteit Leuven, Belgium
Marianna Vivolo, K.U.L., Belgium
Bert Pluymers, K.U.Leuven, Belgium
Dirk Vandepitte, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

615 MULTIOBJECTIVE OPTIMIZATION PROCEDURE APPLIED TO LIGHT-WEIGHT STRUCTURE DESIGN
Sebastião Cunha Jr, Bruno Silva Sousa, Ariosto Bretanha Jorge, Federal University of Itajuba, Brazil
Claudio Vinicius Paiva, Aerotron, Brazil

661 Parametric analyses of lightweight metallic sandwich plates
Tiziano Polito, Dipartimento di Ingegneria Aerospaziale, Italy
Francesco Franco, Sergio De Rosa, Università degli Studi di Napoli "Federico II", Italy

664 Modal and acoustic characterization of structural components for fuselage applications
Tiziano Polito, University of Naples "Federico II", Department of Aerospace Engineering, Italy
Francesco Marulo, University of Naples "Federico II", Department of Aerospace Engineering, Italy
Antonio Sollo, Marco Aversano, Gennaro Pagnozzi, Piaggio Aero Industries S.p.A., Italy

Medium and high frequency techniques

2 On the analysis of vibro-acoustic systems in the mid-frequency range using an efficient hybrid WB-SEA approach
Karel Vergote, Wim Desmet, K.U.Leuven, Belgium
Dirk Vandepitte, K.U. Leuven, Belgium

33 High frequency responses of vibrating systems from scaled finite element models with coarse meshes
Xianhui Li, Beijing Municipal Institute of Labour Protection, China

145 Acoustic Energy Distribution in Multi-component Structures - Dynamical Energy Analysis versus numerically exact results
Gregor Tanner, David Chappell, Hanya Ben Hamdin, Stefano Giani, University of Nottingham, United Kingdom
Cathleen Seidel, Frank Vogel, inuTech GmbH, Germany

187 Application of the wave based prediction technique to building acoustical problems
Arne Dijckmans, Gerrit Vermeir, K.U.Leuven, Belgium

235 Advanced Spectral Finite Element Method for Computational Acoustics in the Mid-Frequency Range
Andreas Hüppe, Manfred Kaltenbacher, Alpen-Adria-Universität Klagenfurt, Austria

303 On some enhancement of the VTCR for mid-frequency acoustics and vibrations
Louis Kovalevsky, LMT - Ecole Normale Supérieure de Cachan, France
Pierre Ladevèze, Riou Hervé, Ecole Normale Supérieure de Cachan, France

388 A Floquet-Bloch decomposition of the elastodynamical equations for the computation of wave’ dispersion in damped mechanical systems
Manuel Collet, Morvan Ouisse, FEMTO-ST Institute, France
Massimo Ruzzene, Georgia Institute of Technology, United States
Mohamed Ichchou, École Centrale de Lyon, France

494 Simulation of pass-by noise of automotive vehicles in the mid-frequency range using Fast Multipole BEM
Jacobus Huijssen, KU Leuven, Belgium

496 On hidden potentials of the wave based method.
Jevgenijs Jegorovs, Fraunhofer ITWM, Germany

498 A Multi-Level Wave Based modelling approach for flexural wave propagation in perforated flat plates
Bert Van Genechten, K.U.Leuven, Belgium
Dirk Vandepitte, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

506 Acoustic Design Sensitivity Analysis of 3D vibro-acoustic problems using the Wave Based Method
Kunmo Koo, GIST, Korea, Republic of
Bert Pluymers, K.U.L., Belgium
Wim Desmet, K.U.Leuven, Belgium
Semyung Wang, GIST, Korea, Republic of

520 Wave based technique for the analysis of fully coupled structural-acoustic unbounded problems
Jan Rejlek, Hans-Herwig Priebsch, Virtual Vehicle Research and Test Center, Austria

545 The application of the Wave Based Technique for 3D free-field radiation calculation using a residual error controlled adaptive strategy
Tamás Mócsai, Virtual Vehicle (ViF), Austria
Franz Diwoky, AVL List GMBH, Austria
Hans-Herwig Priebsch, Virtual Vehicle Research and Test Center, Austria

546 An efficient wave based method for 2D dynamic poroelastic problems with corner stress singularities resulting from various boundary conditions
Elke Deckers, K.U.Leuven, Belgium
Dirk Vandepitte, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

583 Fast Multipole BEM Modeling of Head Related Transfer Functions of a Dummy Head and Torso
Peter Fiala, Budapest University of Technology and Economics, Hungary
Jacobus Huijssen, KU Leuven, Belgium
Bert Pluymers, K.U.Leuven, Belgium
Raphael Hallez, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium

620 Using the Wave Finite Element Method to Build Spectral Elements
Andre Goldstein, José Arruda, Universidade Estadual de Campinas, Brazil
Rubén Picó, Universidad Politécnica de Valencia, Spain
Priscilla Brandão, Rangel Nascimento, Universidade Estadual de Campinas, Brazil

630 On the prediction of damping loss factor of fuselage panels with viscous-elastic materials using Periodic Structure Theory and Finite Element method
Julio A. Cordioli, Giovanni Bratti, Cristiano Stumpf, Arcanjo Lenzi, Federal University of Santa Catarina, Brazil

637 Use of FMM-BEM and Hybrid FE-SEA methods for the vibration and acoustic analysis of a submarine hull
Julio A. Cordioli, Israel Pereira, Federal University of Santa Catarina, Brazil

654 An explicit Wave Based - Finite element model as alternative to the DtN finite element method
Bart Bergen, K.U.Leuven - dept. of mechanical engineering, Belgium
Bert Van Genechten, K.U.Leuven, Belgium
Dirk Vandepitte, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

691 Spatial energy decay and indirect couplings in statistical energy analysis
Mathias Barbagallo, Svante Finnveden, KTH, Sweden

Modal testing: methods and case studies

46 Global static and dynamic car body stiffness based on a single experimental modal analysis test
Jan Helsen, KULeuven, Belgium
Luc Cremers, BMW AG, Germany
Peter Mas, LMS International, Belgium
Paul Sas, K.U.Leuven, Belgium

112 Correlation of Acoustic Fluid-Structural Interaction Method for Modal Analysis with experimental results of a Hydraulic Prototype Turbine Runner in Water
Bernd Graf, Voith Hydro Holding GmbH & Co KG, Germany
Li Chen, Voith Hydro York, United States

276 Modal Testing of an Inflatable, Self-Rigidizing Toroidal Satellite Component
Mitra Danesh Pazhooh, Mohamed Dokainish, Samir Ziada, McMaster University, Canada

349 Solar Impulse - How to validate the numerical model of a superlight aircraft with A380 dimensions!
Marc Boeswald, Yves Govers, Deutsches Zentrum für Luft- und Raumfahrt e.V., Germany
Arne Vollan, AeroFEM GmbH, Switzerland
Marcus Basien, Solar Impulse SA, Switzerland

360 Correlation of a Normal Modes and Experimental Modal Analyses of Steering System Test Fixture
Basem Alzahabi, Kettering University, United States

489 Noise Leakage Suppresion in Multivariate FRF Measurements Using Periodic Excitations
Rik Pintelon, Vrije Universiteit Brussel, Belgium
Gerd Vandersteen, VUB, Belgium
Johan Schoukens, Vrije Universiteit Brussel - VUB, Belgium
Yves Rolain, Vrije Universiteit Brussel, Belgium

492 A strategy for experimental investigation of machine tool dynamics
Carsten Schedlinski, ICS Engineering GmbH, Germany
Paul Dieter Scharpf, Matthias Weber, Boehringer Werkzeugmaschinen GmbH, Germany

558 Experimental Modal Analysis in Submerged Cantilever Plate with Nearby Rigid Wall
Cristian Rodriguez, University of Concepcion, Chile
Eduard Egusquiza, Technical University of Catalonia, Spain
Fabian Pierart, Luis Contzen, University of Concepcion, Chile

560 Identification of elastic and damping properties of sandwich structures using high resolution modal analysis.
Marc Rébillat, Xavier Boutillon, LMS, France

631 Flexible shaker excitation signals for improved FRF estimation and and non-linearity assessment
Mauro Gatto, University of Rome "La Sapienza", Italy
Bart Peeters, LMS International, Belgium
Giuliano Coppotelli, University of Rome "La Sapienza", Italy

646 Simulation of Payne effect of elastomeric isolators with a harmonic balance method
Vincent Jaumouillé, EADS Innovation Works, France
Jean-Jacques Sinou, Ecole Centrale de Lyon, France
Benoît PETITJEAN, EADS Innovation Works, France

656 Archive Format Requirements for Long Term Storage of Dynamic Signal Data
Allyn Phillips, Randall Allemang, University of Cincinnati, United States

687 Practical Aspects of Shaker Measurements for Modal Testing
Marco Peres, Richard Bono, The Modal Shop, Inc., United States
David Brown, University of Cincinnati, United States

Model updating and correlation

101 Identification of Parameters for a Simplified Model of Large Rotating Electric Machines Using Time Series and Updating Techniques
Samuel da Silva, Sidney Bruce Shiki, Felipe Franzoni, Western Paraná State University (UNIOESTE), Brazil
Geraldo Carvalho Brito Jr, Itaipu Binacional , Brazil

103 Extensions of the MAC criterion to complex modes
Pierre Vacher, Béatrice Jacquier, Alain Bucharles, ONERA, France

120 Updating acoustical FE models: localization of unreliable physical data
Aurélie Progneaux, Philippe Bouillard, Université Libre de Bruxelles, Belgium
Pierre Ladevèze, Ecole Normale Supérieure de Cachan, France

153 Model Updating via Manifold Distance Minimization
Yoram Halevi, CNR -ITIA, Italy
Demitry Vilensky, Technion, Israel
Biswa Datta, Northern Illinois University , United States

318 Dynamic finite element updating based on the Hu-Washizu variational principle
Rafael Castro-Triguero, University of Cordoba, Spain
Rafael Gallego, University of Granada, Spain
Demosthenes Talaslidis, University of Thessaloniki, Greece
Guillermo Rus, University of Granada, Spain

345 Stochastic model updating of an aircraft like structure by parameter covariance matrix adjustment
Yves Govers, Deutsches Zentrum für Luft- und Raumfahrt e.V., Germany
Michael Link, University of Kassel, Germany

356 Second order approximations in model updating
Branislav Titurus, University of Bristol, United Kingdom
Michael Friswell, Swansea University, United Kingdom

525 The impact of high-fidelity model geometry on test-analysis correlation and FE model updating results.
Tom Lauwagie, Dynamic Design Solutions, Belgium
Frederik Van Hollebeke, Hansen Transmissions, Belgium
Raf Zegels, Materialise, Belgium
Bert Pluymers, K.U.Leuven, Belgium
Eddy Dascotte, Dynamic Design Solutions, Belgium

536 Model Updating Using Operational Data
Tom Lauwagie, Dynamic Design Solutions, Belgium
Johannes Guggenberger, Müller-BBM GmbH, Germany
Jacques Strobbe, Eddy Dascotte, Dynamic Design Solutions, Belgium

Monitoring and diagnostics of rotating machinery

26 Natural roller bearing fault detection by angular measurement of true instantaneous angular speed
Laurence RENAUDIN, INSA de LYON, France
Frédéric BONNARDOT, IUT Roanne, France
Olivier MUSY, SNR Roulements, France
Jean-Baptiste DORAY, VOLVO 3P, France
Didier REMOND, LaMCoS, Université de Lyon, France

27 Angular and temporal determinism of rotating machine signals : the diesel engine case
Quentin Leclere, Laurent Pruvost, Etienne Parizet, INSA Lyon, France

49 An algorithm to diagnose ball bearings faults in servomotors running arbitrary motion profiles
Luca. Bassi, Tetra Pak Packaging Solutions, Italy
Marco Cocconcelli, Cristian Secchi, Riccardo Rubini, Cesare Fantuzzi, University of Modena and Reggio Emilia, Italy

67 GEARED SYSTEM CONDITION DIAGNOSTICS VIA TORSIONAL VIBRATION MEASUREMENT
Mohamed El-morsy, Shawki Abouel-seoud, El-adl Rabeih, Helwan University, Egypt

93 The Synchronous Average – revisited
Simon Braun, Technion- Istrael Institute of Technology, Israel

105 Vibro-acoustic signature analysis of the threshing process in harvesting machines
Simone Delvecchio, Stefano Fiorati, Engineering Department in Ferrara - KULeuven, Italy
Bart Misotten, CNH – R&D crop harvesting, Belgium
Paul Sas, K.U.Leuven, Belgium

126 Linear smoothing of FRF for aicraft engine vibration monitoring
Aurelien Hazan, SAMM - CNRS - Universite Paris 1, France
Michel Verleysen, Université Catholique de Louvain, Belgium
Marie Cottrell, SAMM - Université Paris 1, France
Jerome Lacaille, Snecma, France

194 Contactless Diagnostics of Blade Vibration of Low-Pressure Steam Turbine Stages
Pavel Procházka, František Vanek, Institute of Thermomechanics AS CR, Czech Republic

218 Crack Identification in Rotating Machines with Active Bearings
Michael Friswell, Swansea University, United Kingdom
Grzegorz Litak, Lublin University of Technology, Poland
Jerzy Sawicki, Cleveland State University, United States

278 An Online Intelligent Monitoring Algorithm for car gearboxes faults
david crombez, Clemessy, France
Houcine Chafouk, Ghaleb Hoblos, IRSEEM, France

285 Failure diagnostics of a spiral bevel gearbox using EMD and HHT
Roberto Ricci, Paolo Pennacchi, Matteo Lombardi, Corrado Mirabile, Politecnico di Milano, Italy

288 Identification of Multi-Harmonic Periodic Component from a Combination with Gaussian Random Noise by the Use of High-Order PDF Moments
Alexander Steinwolf, University of Auckland, New Zealand

293 Spiral vibrations in power units: modelling and experimental evidences
Paolo Pennacchi, Andrea Vania, Steven Chatterton, Roberto Ricci, Politecnico di Milano, Italy

324 Identification of inner race defect in radial ball bearing using acoustic emission and wavelet analysis
Rajesh Kumar, Sant Longowal Institute of Engineering and Technology, India
Divya Prakash, Robert Bosch Car Multimedia, Germany
Manpreet Bains, Haryana College of Technology and Management, India

387 Comparison between angular sampling and angular resampling methods applied on the vibration monitoring of a gear meshing in non stationary conditions.
Hugo ANDRE, LaMCoS, Université de Lyon, France
Jérôme Antoni, Laboratoire de Mécanique de Roberval University of Technology of Compiègne, France
Ziad DAHER, PRISME Institute, University of Orléans, France
Didier REMOND, LaMCoS, Université de Lyon, France

411 Estimation of the synchronous average under varying rotating speed condition for vibration monitoring
Ziad DAHER, Edgard SEKKO, PRISME Institute, University of Orléans, France
Jérôme Antoni, Laboratoire de Mécanique de Roberval University of Technology of Compiègne, France
Cécile CAPDESSUS, Lévi ALLAM, PRISME Institute, University of Orléans, France

445 A novel approach for the cyclo-non-stationary analysis of speed varying signals
Gianluca D'Elia, Engineering Department University of Ferrara, Italy
Ziad DAHER, PRISME Institute, University of Orléans, France
Jerome Antoni, University of Technology of Compiegne, France

456 Zebra Tape Butt Joint Correction Algorithm for Rotating Shafts with Torsional Vibrations
Karl Janssens, Piet Van Vlierberghe, Wilfried Claes, Bart Peeters, Ton Martens, Philippe D'Hondt, LMS International, Belgium

581 Non intrusive Technique for Monitoring Vibration of Operating Turbine Blades
Rama Rao, Bhabha Atomic Research Centre, India

Multi-body dynamics and control

108 Electromagnetic forces in elastic multibody systems
Martin Henger, Rüdiger Schroth, Robert Bosch GmbH, Germany

227 GEAR NOISE EVALUATION THROUGH MULTIBODY TE-BASED SIMULATIONS
Antonio Palermo, Domenico Mundo, University of Calabria, Italy
Antonino Sergio Lentini, Rabah Hadjit, Peter Mas, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium

260 Active Control of Child Restraint System in Frontal Crash
Takayuki Koizumi, Nobutaka Tsujiuchi, Yoshiki Noritou, Doshisha University, Japan

392 Geometrical Stiffness Matrix in Modal Space for Multibody Analysis of Flexible Bodies with Moderate Deformations
Dragan Marinkovic, Manfred Zehn , TU Berlin, Germany

468 Reduced-Order-Model Interpolation for use in Global Modal Parameterization
Frank Naets, KULeuven, Belgium
Gert Heirman, Katholieke Universiteit Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium

475 Component mode selection in flexible multibody dynamics with application to cranktrain modelling
Stefano Ricci, Marco Troncossi, Alessandro Rivola, Università di Bologna, Italy

547 On modelling and dynamical analysis of railway vehicles vibration
Miroslav Byrtus, Vladimir Zeman, Zdenek Hlavac, University of West Bohemia, Czech Republic

Non-linearities: identification and modelling

19 Identification and quantification of nonlinear stiffness and nonlinear damping in resonant circuits
Mikaya Lumori, University of San Diego, United States

121 Nonlinear Torsional Vibrations of Thin Walled Box Beams
S. A. Sina, H. Haddadpour, Sharif University of Technology, Iran (Islamic Republic of)

167 Study of Excitation Force by Refrigerant Flow in an Electromagnetic Valve of an Outdoor Air Conditioning Unit
Yann Gallais, Taichi Sato, Tokyo Denki University, Japan
Hiroki Ota, Hitachi Appliances Inc., Japan
Hirotoshi Takeuchi, Tokyo Denki University, Japan

174 Comparing the Bispectrum, the Coherence Function and the Hilbert Transform as Methods of Nonlinear Identification.
Daryl Hickey, University of Liege, Belgium
Keith Worden, University of Sheffield, United Kingdom

239 Modal Testing using Nonlinear Normal Modes: An Experimental Demonstration
Maxime Peeters, Gaëtan Kerschen, Jean-Claude Golinval, University of Liège, Belgium

241 Non linear dynamics of a whole vehicle FE Model using a Harmonic Balance Method
Franck Barillon, Renault , France
Jean-Jacques Sinou, Ecole Centrale de Lyon, France
Jean-Marc Duffal, Renault , France
Louis Jézéquel, Ecole Centrale de Lyon, France

344 Principal Component Analysis for Nonlinear Systems
Daryl Hickey, Jose Ignacio Rothkegel, Olivier Bruls, University of Liege, Belgium

368 Measuring Dynamic Nonlinearities using the Frequency Response and the Hilbert Transform Methods
Alex Carrella, David Ewins, University of Bristol, United Kingdom
Anna Cappellini, Politecnico di Milano, Italy
Michael Feldman, Technion - Israel Institute of Technology, Israel

374 Model updating of locally nonlinear systems based on Multiharmonic Extended Constitutive Relation Error
Inge ISASA GABILONDO, ORONA EIC S. Coop., Spain
Aurelien Hot, Scott Cogan, Emeline SADOULET REBOUL, FEMTO-ST Institute, France

414 Vibrational energy harvesting with non linear oscillators
Andrea Cammarano, University of Bristol, United Kingdom

416 Identification of Model Parameters from Experimental Measurements of a Cantilever Beam with a Geometric Nonlinearity
Matthew Allen, Michael Sracic, University of Wisconsin - Madison, United States

490 Prediction of Aeroelastic Response Including Geometric Non-Linearities
Jonathan Cooper, Yazdi Harmin, University of Liverpool, United Kingdom

548 Modelling non linear effects in elastomer components, including uncertainties
Benoît PETITJEAN, Vincent Jaumouillé, EADS Innovation Works, France

561 Experimental Detection and Quantification of Structural Nonlinearity Using Homogeneity and Hilbert Transform Methods.
Knud Abildgaard Kragh, Jon Juel Thomsen, Technical University of Denmark, Denmark
Dmitri Tcherniak, Bruel and Kjaer Sound and Vibration measurement, Denmark

592 Nonlinear dynamic interactions between a cable with no axial preload and its casing. Application to automotive gearshift command systems
Nadege LEVECQUE, Renault SA, France
Lionel MANIN, Thouraya NOURI-BARANGER, Régis DUFOUR, INSA Lyon, France

Operational modal analysis

48 On the use of the transmissibility concept for the evaluation of frequency response functions
A.P.V. Urgueira, R.A.B. Almeida, Universidade Nova de Lisboa, Portugal
Nuno Maia, Instituto Superior Tecnico, Portugal

158 Output-only modal parameter identification on least square time-frequency analysis for time-varying structure
Sida Zhou, Li Liu, Beijing Institute of Technology, China

228 USING THE RANDOM DECREMENT METHOD FOR THE DECENTRALIZED ACQUISITION OF MODAL DATA
Andreas Friedmann, Michael Koch, Dirk Mayer, Fraunhofer Institute for Structural Durability and System Reliability LBF, Germany

277 Modal parameter estimation from ambient data using time-frequency analysis
LE THAI HOA, Yukio Tamura, Akihito Yoshida, Tokyo Polytechnic University, Japan

281 Experimental modal analysis of a steel test specimen based on output-only vibration data
Maik Brehm, Volkmar Zabel, Bauhaus-University Weimar, Germany

306 Combined use of FRFs and transmissbility functions in an OMAX framework
Tim De Troyer, Erasmushogeschool Brussel, Belgium
Christof Devriendt, Patrick Guillaume, Vrije Universiteit Brussel, Belgium
Mark Runacres, Erasmushogeschool Brussel, Belgium

336 Operational Modal Analysis of a Rotating Helicopter Blade
Alessandro Agneni, Giuliano Coppotelli, Chiara Grappasonni, University of Rome "La Sapienza", Italy

487 On the separation of a measured structural response in a forced and an ambient part for OMAX testing.
Edwin Reynders, K.U.Leuven, Belgium
Guido De Roeck, K.U. Leuven, Belgium

602 A New Method for Selection of Reference Points in Operational Modal Testing of Large Structures
Mohammad Mahdi Khatibi, Mohammad Reza Ashory, Hoda Sarparast, Zahra Ehsani, Semnan University, Iran (Islamic Republic of)

Parameter estimation and identification

41 Identification of modal parameters using wavelet transform from free vibration data
Mostafa Jafari, Semnan university, Iran (Islamic Republic of)

42 Enhanced meta-modelling techniques for analysis of mode crossing, mode veering and mode coalescence in structural dynamics
Alberto Gallina, Lukas Pichler, Tadeusz Uhl, AGH - University of Science and Technology, Poland

82 Frequency Response Function measurements using concatenated data records
Johan Schoukens, Vrije Universiteit Brussel - VUB, Belgium
Gerd Vandersteen, Rik Pintelon, VUB, Belgium

193 Complex modes identification via Hilbert transform
Stefano Gabriele, University "Roma Tre" of Rome, Italy
Daniele Spina, Department of Civil Protection, Italy
Claudio Valente, University "G. D'Annunzio" of Chieti-Pescara, Italy

286 Model Parameter Estimation of Structures with Over-damped Poles
Mahmoud El-Kafafy, Vrije university Brussels (VUB), Belgium
Patrick Guillaume, Vrije Universiteit Brussel, Belgium

657 Survey of Modal Techniques Applicable to Autonomous/Semi-Autonomous Parameter Identification
Randall Allemang, David Brown, Allyn Phillips, University of Cincinnati, United States

Railway dynamics and ground vibrations

70 Fully 3D analysis of HST-track-soil-structure dynamic interaction
Antonio Romero, Pedro Galvín, José Domínguez, Universidad de Sevilla, Spain

164 Contribution of vehicle/track dynamics to the ground vibrations induced by the Brussels tramway
Georges Kouroussis, Olivier Verlinden, Calogero Conti, University of Mons, Faculty of Engineering, Belgium

172 AN INVESTIGATION OF TRACK PARAMETER EVOLUTION RELATED TO SQUAT INITIATION AND GROWTH
Maider Oregui, Zili Li, Delft University of Technology, Netherlands

217 Dynamic soil-structure interaction applying a hybrid ITM/FEM approach
Georg Frühe, Gerhard Müller, Technische Universität München , Germany

246 Predictive maintenance by identification of suspension parameters from inline acceleration measurements
Sönke Kraft, SNCF, France
Guillaume Puel, Ecole Centrale Paris, France
Christine Fünfschilling, SNCF, France
Denis Aubry, Ecole Centrale Paris, France

363 Vibration Dynamics of High Speed Train with Pareto Optimized Damping of Bogie Suspension to Enhance Safety and Comfort
Albin Johnsson, Viktor Berbyuk, Mikael Enelund, Chalmers University of Technology, Sweden

393 A 3D time domain formulation for the analysis of train induced vibrations
Nuno Correia dos Santos, João Barbosa, Rui Calçada, Álvaro Azevedo, Raimundo Delgado, Faculty of Engineering of the University of Porto (FEUP), Portugal

397 Ground motion induced by train passage in urban area
Marco Stupazzini, Munich RE, Germany
Roberto Paolucci, Politecnico di Milano, Italy

427 Generation of Rayleigh-type edge waves by laser-initiated airborne shocks
Vasil Georgiev, Victor Krylov, Loughborough University, United Kingdom
Qin Qin, University of Hull, United Kingdom
Keith Attenborough, The Open University, United Kingdom

519 Rail Vehicle lateral comfort improvement of on curve negotiation by means of hold off devices
Jordi Vinolas, Asier Alonso, CEIT and TECNUN (University of Navarra), Spain
F. Javier Nieto, CEIT, Spain
J. German Gimenez, CAF and TECNUN (University of Navarra), Spain

541 Development of a hybrid prediction method for railway induced vibration
Hans Verbraken, Hans Eysermans, Erwin Dechief, Stijn Francois, Geert Lombaert, Geert Degrande, K.U.Leuven, Belgium

686 Calculating Ground-Borne Noise From Ground-Borne Vibration - A Comparison of Different Approaches
Karoline Alten, Herbert Friedl, Rainer Flesch, AIT - Austrian Institute of Technology, Austria

Self-excited vibrations

18 Effect of damping on the propensity of squeal instability: A numerical investigation
Francesco Cantone, Francesco Massi, Université de Lyon, CNRS, INSA-Lyon, France

127 Damping identification in an non-linear aeroelastic structure
Gareth Vio, University of Liverpool, United Kingdom
Greg Dimitriadis, University of Liege, Belgium
Marco Prandina, Univeristy of Liverpool, United Kingdom

307 Bifurcation analysis of an airfoil undergoing plunge stall flutter oscillations in a wind tunnel
Norizham Abdul Razak, Universite de Liege, Belgium
Thomas Andrianne, University of Liège, Belgium
Grigorios Dimitriadis, University of Liege, Belgium

308 Limit Cycle Oscillations of a Delta Wing in a Low Speed Wind Tunnel
Banu Korbahti, Istanbul University, Turkey
Emile Kagambage, University of Liege, Belgium
Thomas Andrianne, University of Liège, Belgium
Damien Watrin, Grigorios Dimitriadis, University of Liege, Belgium

321 Flight Flutter Testing and Clearance of the baseline Configuration of a Developmental Combat Aircraft
Vaidyanathan R V, Aeronautical Development Agency, India
Hemalatha E, Aeronautical Developement Agency, India

382 Prediction of aircraft vibration using PVDF foils for the measurements of unsteady aerodynamic pressures
Wolfgang LUBER, EADS, Germany

Smart structures

28 A Tubular Dielectric Elastomer Actuator: Fabrication, Characterisation and Active Vibration Isolation
Rahimullah Sarban, Danfoss PolyPower A/S, Denmark
Richard Jones, Univeristy of Southern Denmark, Denmark
Brian Mace, University of Southampton, United Kingdom
Emiliano Rustighi, Univeristy of Southampton, United Kingdom

131 APPLICATION OF MULTIVARIABLE TECHNIQUES TO DESIGN EXPERIMENTALY A FLEXIBLE SATELLITE ATTITUDE CONTROL SYSTEM
Luiz Carlos DeSouza, Joao Carlos Castro, INPE, Brazil

132 Elastic travelling waves in multi-dimensional structures with application to self propulsion
Eyal Setter, Izhak Bucher, Technion- Israel Inst. of Technology, Israel

181 Hydrodynamic Bearing with Electromagnetic Actuators: Rotor Vibration Control and Limitations
Daniel Cerqueira Moraes, Rodrigo Nicoletti, University of Sao Paulo, Brazil

196 AN ENERGY HARVESTING MECHANISM TRAVELLING THE HUMAN INTESTINAL SYSTEM
Nadav Cohen, Technion - Isreal Institute of Technology, Israel

266 An adaptive wing with a configuration of Fibre Bragg Grating sensors
Magdalena Mieloszyk, Institute of Fluid-Flow Machinery PASci, Poland
Arkadiusz Zak, IFFM PASci, Poland
Wieslaw Ostachowicz, Institute of Fluid–Flow Machinery PASci, Poland

355 Vibrational energy harvesting using a multi-degree-of-freedom device
Matthew Dawson, David Barton, University of Bristol, United Kingdom

400 Experimental Validation of Piezoelectric Energy Harvesters Subjected to Random Vibration Environments
Paulo Varoto, University of Sao Paulo, Brazil
Alper Erturk, Daniel Inman, Center for Intelligent Material Systems and Structures, United States

452 AEROSERVOELASTIC FLIGHT CONTROL DESIGN FOR A MILITARY COMBAT AIRCRAFT WEAPON SYSTEM
Wolfgang LUBER, EADS, Germany

586 A hardware in-the-loop simulator of a backpack energy harvester.
Evangelos Papatheou, University of Sheffield, United Kingdom
Stephen Burrow, Lindsay Clare, University of Bristol, United Kingdom
Neil Sims, Sheffield University, United Kingdom

Substructuring and coupling

183 Hybrid Reduction of MIMO Systems
Julian Stoev, Flanders' MECHATRONICS Technology Centre, Belgium
Jan Mohring, Fraunhofer-Institut für Techno- und Wirtschaftsmathematik, Germany

291 MODELING PROCEDURE OF A MACHINING CENTER USING UPDATING TECHNIQUES AND SUBSTRUCTURE SYNTHESIS
Iker Garitaonandia, University College of Technical Mining and Civil Engineering. University of the Basque Country, Spain
Joseba Albizuri, Faculty of Engineering. University of the Basque Country, Spain
Jesus María Hernández, M. Helena Fernandes, University College of Technical Mining and Civil Engineering. University of the Basque Country, Spain
Itxaso Olabarrieta, University College of Technical Mining and Civil Engieneering. University of the Basque Country, Spain
Jokin Muñoa, IDEKO Centro Tecnológico S. Coop., Spain

511 Fixed interface based double modal synthesis for local damping optimization
Denis Brizard, Louis Jézéquel, LTDS, France
Bernard Troclet, EADS Astrium, France

643 An explicit algebraic reduction technique, involving physical, generalized or modal coordinates
Jean-Marie Lagache, Peugeot-Citroën, France
Samir Assaf, ESTACA, France

Transfer path analysis and source identification

31 Application of the Transmissibility Concept in Transfer Path Analysis
Peter Gajdatsy, K. U. Leuven, Belgium
Karl Janssens, LMS International n.v., Belgium
Wim Desmet, K.U.Leuven, Belgium
Herman Van der Auweraer, LMS International, Belgium

243 On the accuracy reciprocal and direct vibro-acoustic transfer-function measurements on vehicles for lower and medium frequencies.
Christophe Coster, Daisuke Nagahata, Peter J. G. van der Linden, LMS International nv, Belgium

289 Multiple coherence method in time domain for an analysis of the transmission paths of noise and vibrations with non stationary signals
Ana Gómez González, Jerónimo Rodríguez García, Universidad de Santiago de Compostela, Spain
Xabier Sagartzazu Sorazu, Ikerlan Research Center, Spain
Andreas Schuhmacher, Brüel&Kjaer Sound and Vibration, Denmark
Inge Isasa, Orona EIC S. Coop., Spain

377 ESTIMATION OF TRANSMITTED FORCES USING THE TRANSMISSIBILITY CONCEPT FOR MULTIPLE DEGREE OF FREEDOM SYSTEMS
Miguel de Matos Neves, IDMEC-IST, Portugal

528 Application of operational noise path analysis to systems with rotational degrees of freedom
Dmitri Tcherniak, Bruel and Kjaer Sound and Vibration measurement, Denmark

611 Open transfer path measurement round-robin using a simplified measurement object
Pascal Dietrich, Institute of Technical Acoustics, RWTH Aachen University, Germany
Bruno Masiero, Matthias Lievens, Michael Vorländer, Insitute of Technical Acoustics, RWTH Aachen University, Germany
Sylvio Bistafa, University of Sao Paulo - USP, Brazil
Samir N.Y. Gerges, Federal University of Santa Catarina - UFSC, Brazil

Tyre/road noise and experimental validation (special session, dr. I. Lopez Arteaga, dr. P. Kindt)

21 Operational Transfer Path Analysis: Theory, Guidelines & Tire Noise Application
Dennis Klerk, Müller-BBM VAS B.V., Netherlands
Alexander Ossipov, Goodyear Innovation Center, Luxembourg

269 Vibration Analysis of Rolling Tire based on Thin Cylindrical Shell Theory
Takayuki Koizumi, Nobutaka Tsujiuchi, Doshisha University, Japan
Masami Matsubara, Doshisha University , Japan
Fumiya Nakamura, Doshisha University, Japan
Koji Matsuyama, TOYO TIRE & RUBBER CO.,LTD., Japan

353 Investigation of stress-distribution in a car tyre with regards to rolling resistance
Carsten Hoever, Patrick Sabiniarz, Wolfgang Kropp, Chalmers University of Technology, Sweden

415 Prediction of tyre hub force transmissibility using a shell model of belt and sidewalls
Christophe Lecomte, University of Southampton, United Kingdom
Will Graham, University of Cambridge, United Kingdom
Martin Dale, Land Rover, United Kingdom
Edwin Deerenberg, Goodyear Innovation Center Luxembourg, Luxembourg

477 Noise reduction by absorbing road surfaces: destroying the horn effect
Bert Peeters, M+P - consulting engineers, Netherlands
Inez Ammerlaan, Fontys University of Applied Sciences, Netherlands
Ard Kuijpers, M+P - consulting engineers, Netherlands

480 Influences on the vibration frequencies of tyre tread blocks
Matthias Kröger, University of Technology Bergakademie Freiberg, Germany
Patrick Moldenhauer, University of Technology Bergakademie Freiberg, Germany

532 AN IMPLICIT AND EXPLICIT SOLVER FOR CONTACT PROBLEMS
Arjan Schutte, Erik Dannenberg, Ysbrand Wijnant, Andre de Boer, University of Twente, Netherlands

543 Experimental investigations on interior tire-road noise
Dirk Bekke, Apollo Vredestein B.V., Netherlands
Ysbrand Wijnant, Andre de Boer, University of Twente, Netherlands

563 Measurement of the tire dynamic transfer stiffness at operational excitation levels
Peter Kindt, KUL, Belgium
Filip De Coninck, Paul Sas, Wim Desmet, K.U.Leuven, Belgium

608 Respective weight of tire vibration and air pumping in the road texture noise
Daniel Rochoux, Frederic Biesse, Michelin, France

619 Influence of material damping on the prediction of road texture and tread pattern related rolling resistance
Ines Lopez Arteaga, Eindhoven University of Technology, Netherlands

Uncertainties in structural dynamics and acoustics

29 Model reduction based on Karhunen-Loeve decomposition and smooth decomposition for random mechanical systems
Sergio Bellizzi, CNRS, France
Rubens Sampaio, PUC Rio, Brazil

32 Multi-scale stochastic method to perform a composite longitudinal bar
Luca Guj, Rieter Automotive Management AG, Switzerland
Antonio Culla, Università di Roma La Sapienza, Italy
Aldo Sestieri, Sapienza University of Rome, Italy

43 Uncertainty propagation in rotor-model-based identification of foundations in rotating machinery
L.U. Medina, Universidad Simón Bolívar, Venezuela
N. Feng, Eric Hahn, University of New South Wales, Australia

90 A low rank update theory for the vibration analysis of uncertain spot welded structures
Ricardo de Alba, Brian Mace, Neil Ferguson, Christophe Lecomte, University of Southampton, United Kingdom

323 Application of multiphysics approach to study variation of dynamic properties of MEMS structure
Tadeusz Uhl, University of Science and Technology AGH, Poland

348 Bayesian Approach of the skewed Kalman filter applied to an elastically supported structure
Katrin Runtemund, Technische Universität München, Germany
Gerhard Müller, Technische Universität München , Germany

371 Uncertainty quantification in the vibration-based damage assessment of a reinforced concrete beam
Ellen Simoen, Geert Lombaert, Edwin Reynders, K.U.Leuven, Belgium
Guido De Roeck, K.U. Leuven, Belgium

Uncertainty in structural dynamics

44 An identification procedure for epistemic uncertainties using inverse fuzzy arithmetic
Thomas Haag, J. Herrmann, Michael Hanss, University of Stuttgart, Germany

83 Measurement uncertainty propagation in frequency domain parameter identification of mechanical systems
Luis U. Medina Uzcategui, Sergio E. Diaz , Isabel Llatas, Universidad Simon Bolivar, Venezuela

129 Measurement uncertainty in operational modal analysis of a civil structure
Alessandro Cattaneo, Stefano Manzoni, Marcello Vanali, Politecnico di Milano, Italy

140 Interval Model Updating: Method and Application
Hamed Haddad Khodaparast, University of Liverpool, United Kingdom
John E Mottershead, Univeristy of Liverpool, United Kingdom
Kenneth J Badcock, University of Liverpool, United Kingdom

216 ROBUSTNESS ANALYSIS OF INTENTIONAL MISTUNING PATTERNS IN RANDOMLY MISTUNED BLADED DISK ASSEMBLIES
M. Ersin YUMER, Middle East Technical University, Mechanical Engineering Department, Turkey
Ender CIGEROGLU, H. Nevzat OZGUVEN, Department of Mechanical Engineering, Middle East Technical University, Turkey

229 Modeling of Aerostatic Ceramic Porous Bearings Considering Material Permeability Distribution
Zilda de Castro Silveira, Rodrigo Nicoletti, University of Sao Paulo, Brazil

252 Application of Selected Uncertainty Analysis Methods to NVH Development of Motorcycle Engines
Henning Netzmann, BMW Motorcycles, Germany
Michael Hanss, Lothar Gaul, University of Stuttgart, Germany

256 High frequency FRF bound prediction for uncertain symmetrically-laminated composite plates
Abdullah Seçgin, University of Sussex , United Kingdom
Julian Dunne, University of Sussex, United Kingdom
Lionel Zoghaib, University of Sussex (seconded from CDH AG), United Kingdom

257 Construction and experimental identification of an uncertain model in computational dynamics using a generalized probabilistic approach of uncertainties
batou anas, Christian Soize, Université Paris-Est, France
mathieu corus, EDF R&D, France

267 Uncertainty Quantification Study for a Comprehensive Electrostatic MEMS Switch Model
Michael Snow, Anil Bajaj, Purdue University, United States

271 Fuzzy structural dynamics using high dimensional model representation
Sondipon Adhikari, Rajib Chowdhury, Michael Friswell, Swansea University, United Kingdom

279 Identification of Uncertain Structural Dynamics Via a Random Parameter Model Approach
Pavlos Michaelides, Spilios Fassois, University of Patras, Greece

340 Approach to validate the influences of uncertainties in manufacturing on using load-carrying structures
Roland Platz, Fraunhofer-Institute of Structural Durability and System Reliability LBF, Germany
Serge Ondoua, TU Darmstadt, Germany
Kai Habermehl, TU Darmstadt , Germany
Thomas Bedarff, Thomas Hauer, Sebastian Schmitt, Holger Hanselka, TU Darmstadt, Germany

347 A partitioning methodology of complex uncertain structural-acoustic systems in low and medium frequency ranges.
Laurent Gagliardini, PSA- Peugeot Citroën, France
Christian Soize, Université Paris-Est, France
Morad Kassem, PSA Peugeot-Citroën / Université Paris-Est, France

354 Probabilistic model of the human cortical bone with mechanical alterations in ultrasonic range
Christophe Desceliers, Christian Soize, Salah Naili, Université Paris-Est, France
Quentin Grimal, Maryline Talmant, Université Paris 6, France

375 An inverse fuzzy arithmetical method for the validation, selection and optimization of models for mechanical systems
Thomas Haag, Michael Hanss, University of Stuttgart, Germany

379 Uncertainty Representation of Composite Material Properties from Limited Experimental Data: A Comparative Study
Loujaine Mehrez, K.U. Leuven, Belgium
Alireza Doostan, University of Colorado, United States
David Moens, Dirk Vandepitte, K.U. Leuven, Belgium

385 Comparison of Linear and Nonlinear Energy Harvesting Strategies with Uncertainty
Brian Mann, Duke University, United States
David Barton, University of Bristol, United Kingdom

413 Bayesian localisation of damage in a linear dynamic system
Christophe Lecomte, Brian Mace, Jonathan (Jon) Forster, Neil Ferguson, University of Southampton, United Kingdom

434 Bayesian Updating of Weight Values Uncertainty in Weighted Residual Methods for Model Updating and Response Predictions
Costas Papadimitriou, University of Thessaly, Greece

449 Performance of linear and nonlinear resonant frequency energy harvesters under uncertain loading conditions
Peter Green, Sheffield University, United Kingdom
Keith Worden, University of Sheffield, United Kingdom
Kais Atallah, Neil Sims, Sheffield University, United Kingdom

450 Analysis of the natural frequency variability of a brake component by combining computer simulations with experimental testing
Alberto Gallina, AGH-University of Science and Technology, Poland
Lukas Pichler, AGH - University of Science and Technology, Poland
Wojciech Lisowski, AGH-University of Science and Technology, Poland
Adam Stachowski, EBCC European Brake and Chassis Components, Poland
Tadeusz Uhl, AGH - University of Science and Technology, Poland

473 Managing uncertainties in aero-engine combustor design
Vincenzo Cirillo, AVIO SpA, Italy
Aniello Izzo, "Federico II" University of Napoli, Italy
Francesco Marulo, University of Naples "Federico II", Department of Aerospace Engineering, Italy
Biagio Palumbo, "Federico II" University of Napoli, Italy

476 A sensitiviy analysis for the stabilization of the CLIC main beam quadrupoles
Stef Janssens, Christophe Collette, Kurt Artoos, Claude Hauviller, European Organisation for Nuclear Research, Switzerland

484 Uncertainty Effects on Aeroelastic Performance Due to Damage on Composite Wings
Abdul Manan, Jonathan Cooper, University of Liverpool, United Kingdom

491 Numerical simulation of RC structures under impact loads – Ideas, models and examples to the consideration of uncertain data
Wolfgang Graf, Technische Universität Dresden, Germany

505 Stochastic analysis for simple and computationally efficient models for tire non-uniformity investigation
Thaís Santos, Adriano Fabro, José R. F. Arruda, Unicamp, Brazil

513 Interval fields to represent uncertainty on input and output side of a FE analysis
Wim Verhaeghe, Andreas Rousounelos, K.U. Leuven, Belgium
Wim Desmet, K.U.Leuven, Belgium
Dirk Vandepitte, David Moens, K.U. Leuven, Belgium

584 Numerical modeling of wave propagation in random anisotropic heterogeneous elastic media
Quang Anh Ta, Didier Clouteau, Régis Cottereau, Ecole Centrale Paris - CNRS, France

587 Fuzzy variable interaction models for damage detection
Oliviero Giannini, Paolo Casini, University of Rome la "Sapienza", Italy

606 A Fuzzy Collocation and Galerkin Method for Fuzzy Elliptic Partial Differential Equations
Samuel Corveleyn, Stefan Vandewalle, Katholieke Universiteit Leuven, Belgium

621 Bayesian Treed Sensitivity Analysis of a Bifurcating Duffing Oscillator
William Becker, The University of Sheffield, United Kingdom
Keith Worden, University of Sheffield, United Kingdom

624 Optimization study of a vehicle bumper subsystem subject to uncertainty
Laszlo Farkas, Stijn Donders, LMS International, Belgium
Danny Schildermans, PUNCH Metals N.V., Belgium
David Moens, K.U. Leuven, Belgium

636 Robustness of the orthogonality checks on a satellite FEM using a SEREP Test Analysis Model
Guglielmo Aglietti, Stefano Redi, Scott Walker, University of Southampton, United Kingdom
Andy Kiley, EADS - Astrium, United Kingdom

644 The influence of design parameter variability on the dynamic behaviour of honeycomb sandwich panels
Stijn Debruyne, Katholieke Hogeschool Brugge Oostende, Belgium
Dirk Vandepitte, K.U. Leuven, Belgium
Eric Debrabandere, Marc Hongerloot, Katholieke Hogeschool Brugge Oostende, Belgium

660 Overview of an experimental and numerical approach to study the intra variability of the vibro-acoustic behaviour of a windscreen in free-free and real conditions
ROBERTO SCIGLIANO, RENAULT; UTC, France
Marco Scionti, Renault, France
Pascal Lardeur, Renault; UTC, France
Jean-Marc Duffal, Renault , France

677 Optimisation under uncertainty applied to a bridge collision problem
Keivan Shariatmadar, Universiteit Gent, Belgium

688 An investigation on the uncertainty in spacecraft base-drive sine vibration test data
Adriano Calvi, European Space Agency, Netherlands
Sébastien Laborde, EADS Astrium Satellites, France

Vehicle concept modelling (special session, prof. M. Pierini, dr. S. Donders)

223 NVH structural optimization using beams and shells FE concept models in the early car development phase at BMW
Alessio Moroncini, BMW AG, VECOM Marie-Curie ITN ESR , Germany
Luc Cremers, BMW AG, Germany
Manfred Kroiss, IABG, Germany

226 ADVANCED VEHICLE BODY CONCEPT MODELLING APPROACH USING REDUCED MODELS OF BEAMS AND JOINTS
Giambattista Stigliano, LMS International, Belgium
Domenico Mundo, University of Calabria, Italy
Stijn Donders, LMS International, Belgium
Tommaso Tamarozzi, K.U. Leuven, Italy

258 On the Improvement of Concept Modeling of Joints within Simplified Finite Element Models with Application to Structural Dynamics
Pavlina Mihaylova, Alessandro Pratellesi, Niccolò Baldanzini, Marco Pierini, Università degli Studi di Firenze, Italy

299 Noise control using input power at low and mid-frequencies: sensitivity to structural design changes
Arnaud Jund, PSA - Peugeot Citroën, France
Laurent Gagliardini, PSA- Peugeot Citroën, France

338 Multi-objective Optimization in Vehicle Concept Modeling
Marco Danti, Maurizio Meneguzzo, Raffaele Saponaro, Izabela Kowarska, Centro Ricerche Fiat SCpA, Italy

515 Investigating the use of reduction techniques in concept modeling for vehicle body design optimization
Tommaso Tamarozzi, K.U. Leuven, Italy
Giambattista Stigliano, Marco Gubitosa, Stijn Donders, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium

529 Non-linear dynamic vehicle model and its inverse for brake control
Edwin de Vries, Daniel Rixen, Delft University of Technology, Netherlands

604 Conceptual and reduced vehicle models performances enhancement through parameter estimation and neural-networks coupling
Marco Gubitosa, Takatoshi Tsukano, Stijn Donders, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium

Vehicle dynamics

5 Ride-comfort of an automobile equipped with colloidal dampers at its frontal suspensions
Claudiu Valentin SUCIU, Fukuoka Institute of Technology, Japan

154 Research on the method of simulating road profile for the vertical vibration analysis of a four-wheel vehicle
Shan Yingchun, Liu Xiandong, BUAA, China

170 A novel empirical model of rubber bushing in automotive suspension system
Lijun Zhang, College of Automotive Engineering, Tongji University, China
Zengliang Yu, College of Automotive Engineering, China

178 Effect of disc thickness variation on anti-lock braking system
Lijun Zhang, Pang Ming, College of Automotive Engineering, Tongji University, China

264 Physically explicit theory of standing waves in tyres at high vehicle speeds
Victor Krylov, Oliver Gilbert, Loughborough University, United Kingdom

436 Structural dynamics characterization of the vehicle seat for NVH performance analysis
Mohammad Fard, RMIT University, Australia
Sekhar Reddy Biddala Reddy, RMIT UNIVERSITY, Australia
Aleksander subic, RMIT University, Australia

626 VIBRATIONAL COMFORT ANALYSIS OF A MULTYBODY VIRTUAL DUMMY FOR CAR AND MOTORCYCLE USERS
Nicola Cofelice, Roberto Zanni, Alessandro Toso, LMS International, Belgium
David Moreno Giner, LMS international, Belgium
Jian Kang, Stijn Donders, LMS International, Belgium

Vehicle noise and vibration (NVH)

96 FRF prediction and durability of optical module and headlamp
Christine Roucoules, Valeo , France
Franklin Chemin, Matis, France
Christophe Cros, Valeo, United States

119 Approaches to analyse and predict sloshing noise of vehicle fuel tanks
Christian Wachowski, Jan-Welm Biermann, Institut fuer Kraftfahrzeuge of RWTH Aachen University, Germany
Roland Schala, Audi AG, Germany

197 Modern Tools and Methods for Low Noise Engine Development
Christoph Nussmann, Christoph Steffens, FEV Motorentechnik GmbH, Germany
Martin Atzler, RWTH Aachen University, Germany

200 Implementation and performances of a GNSS based system for the determination of the pass-by noise produced by vehicles
Edoardo Alessio Piana, Università di Brescia, Italy
Giovanni Piana, Ariel Logic Srl, Italy

225 Vibration and Acoustic Analysis for Automotive Seat Structures Including Porous Materials and Metal Frames
Takao Yamaguchi, Gunma University, Japan
Takashi Yamamoto, Maruyama Shin-ichi, Nissan Motors, Japan
Shirota Ikuo, Masashi Fujimoto, Toru Fukushima, Graduate School of Gunma University, Japan

244 Application of testing, modal analysis and numerical methods to the detection, prediction and avoidance of squeal noise in automotive brake systems.
Carmen Parra, JoseLuis Olazagoitia, Jorge Biera, CITEAN, Spain

248 Predicting Cavitation Desinence in Automotive Torque Converters
Chad Walber, Jason Blough, Carl Anderson, Mark Johnson, Michigan Technological University, United States
Jean Schweitzer, General Motors Corporation, United States

295 Noise Reduction of an A/C unit compressor on an Intercity Bus
Ozge Yildirim, Otokar A.S., Turkey

297 Component analysis of random road-noise’s multiple loads, using orders analysis during a run-up on rollers
Laurent Gagliardini, PSA- Peugeot Citroën, France
Michel Boudin, PSA - Peugeot Citroen, France

326 A contribution to vehicle concept modeling in the field of NVH
Marcin Kula, Elmar Böhler, Virtual Vehicle Research and Test Center, Graz, Austria, Austria
Alexander Rabofsky, MAGNA STEYR Fahrzeugtechnik, Graz, Austria, Austria
Hans-Herwig Priebsch, Virtual Vehicle Research and Test Center, Austria

327 PREDICTION OF VIBRO-ACOUSTIC RESPONSE OF ENCLOSED SPACES BY USING STRUCTURAL MODIFICATION TECHNIQUES
Özlem Demirkan, Middle East Technical University, Turkey
Ipek Basdogan, Koc University, Turkey
H. Nevzat Özgüven, Mehmet Çalýþkan, Middle East Technical University, Turkey

383 Design oriented Time/frequency analysis of contact-friction instabilities in application to automotive brake squeal
Guillaume Vermot des Roches, SDTools, Ecole Centrale Paris, France
Etienne Balmès, SDTools, Arts et Metiers ParisTech, France
Remi Lemaire, Thierry Pasquet, Robert Bosch SAS, France

399 Analytical and Numerical calculation of sound transmission loss characteristics of composite muffler shells
Mohammad hasan Shojaeifard, Rohollah talebitooti, Aref Yadollahi, iran university of science & technology, Iran (Islamic Republic of)

514 Noise Reduction in Gasoline DI Engines by Isolating the Fuel System
Atsushi Watanabe, Hitachi, Ltd., Japan

522 NVH optimization methodologies based on bead modifications in automotive design framework
Antonio Maressa, KUL, Belgium
Bert Pluymers, Wim Desmet, K.U.Leuven, Belgium

591 Noise Reduction in Vehicle Engineering: A Numerical Optimization Strategy for Car Body Panels
Bernhard Wiedemann, Altair Engineering GmbH, Germany

665 Driving next generation Powertrain NVH Refinement thru Virtual Design
Takeshi Abe, Mario Felice, Ford Motor Company, United States

Vibration isolation and nano-positioning (special session, dr. C. Collette)

94 CONTROL-STRUCTURE INTERACTION IN ACTIVE OPTICS OF FUTURE LARGE SEGMENTED MIRRORS
Renaud Bastaits, Bilal Mokrani, André Preumont, Université Libre de Bruxelles, Belgium

95 Intelligent Segmented Deformable Mirrors for Adaptive Optics
Gonçalo Rodrigues, Renaud Bastaits, André Preumont, Université Libre de Bruxelles, Belgium

137 Numerical and experimental modal analysis of a 1-meter deformable mirror
Rami Gasmi, Jean-Laurent Dournaux, GEPI, Observatoire de Paris, CNRS, France
Raphaël Cousty, CILAS, France
Dominique Le Bihan, ONERA, France
Bruno Crépy, CILAS, France
Pascal Jagourel, GEPI, Observatoire de Paris, CNRS, France

359 CLIC quadrupole stabilization and nano-positioning
Christophe Collette, Stef Janssens, Kurt Artoos, Michael Guinchard, Claude Hauviller, European Organisation for Nuclear Research, Switzerland

Vibro-acoustic modelling and prediction

23 Sound Transmission Loss of composite panels. Probabilistic analysis and experimental results
Tiziano Polito, Dipartimento di Ingegneria Aerospaziale, Italy
Francesco Marulo, University of Naples "Federico II", Department of Aerospace Engineering, Italy

134 Prediction of sound absorption coefficient of poroelastic media by a homogenization method
Takashi Yamamoto, Shinichi Maruyama, Nissan Motor Co., Ltd., Japan
Kazuhiro Izui, Kyoto University, Japan
Kenjiro Terada, Tohoku University, Japan
Shinji Nishiwaki, Kyoto University, Japan

151 Forced Response of Two-Dimensional Homogenous Media Using the Wave and Finite Element Method
Jamil Renno, Brian Mace, University of Southampton, United Kingdom

166 EFFICIENT METHOD TO AVOID FICTITIOUS EIGENVALUES FOR INDIRECT BEM
Roberto D'Amico, Alessandro Pratellesi, Marco Pierini, Università degli Studi di Firenze, Italy
Michel Tournour, LMS International, Belgium

180 Validated modelling of joints for the sound radiation simulation of gearboxes
Jochen Neher, University of Applied Scienes Ulm, Germany
Bernd Wender, University of Applied Sciences, Ulm, Germany

182 SIMULATION OF SOUND WAVE PROPAGATION IN PRESENCE OF NOISE BARRIER BY USING THE PARTITION OF UNITY METHOD : A COMPARISON WITH ANALYTICAL METHODS IN 2D CASES
Valentine Everaert, Aurélie Progneaux, Philippe Bouillard, Université Libre de Bruxelles, Belgium

189 Finite element modelization of an engine catalyst for high frequency dynamic calculations
GASNIER Emilie, RENAULT.SAS, France

207 Transient vibration analysis of spinning discs in centrifugal atomization
Huaxia Deng, Huajiang Ouyang, University of Liverpool, United Kingdom

224 Analytical Modal Analysis for the stator system of a permanent magnet synchronous motor for hybrid vehicles and calculating of its natural frequencies
zakaria El Khawly, Daimler AG, Germany
Dieter Schramm, Universität Duisburg-Essen, Germany

251 Sensitivity analysis for acoustic waves propagating through homogenized thin perforated layer
Eduard Rohan, Vladimir Lukes, University of West Bohemia in Pilsen, Czech Republic

335 Simulation of organ pipe transfer function by means of various numerical techniques
Peter Rucz, Fülöp Augusztinovicz, Peter Fiala, Budapest University of Technology and Economics, Hungary

380 Simulation of the vibro-acoustic coupling between structures and heavy fluids
Bernard Van Antwerpen, Diego d'Udekem, Free Field Technologies, Belgium
Christof Weissenborn, Germanischer Lloyd, Germany

419 Reduced iterative correction algorithm for coupled vibro-acoustic problems
Umut Tabak, Daniel Rixen, Delft University of Technology, Netherlands

517 Integrated Vibro-acoustic Calculation for Composite Structures using Coupled Finite and Boundary Element Method
Werner A. Hufenbach, Technische Universitaet Dresden, Germany
Denis Blanchet, Engineering System International GmbH, Germany
Maik Gude, Martin Dannemann, Frank Kolbe, Technische Universitaet Dresden, Germany

521 Experimental validation of a numerical approach for sound radiation reduction of an engine clutch cover
Paolo Badalassi, Piaggio SpA - Pontedera, Italy
Costantino Carmignani, DIMNP - University of Pisa, Italy
Paola Forte, DIMNP - UNiversity of Pisa, Italy
Pietro Vaccarino, Piaggio SpA - Pontedera, Italy

539 Experimental Validation of an Efficient Procedure for Large Acoustic Radiation Problems
Magnus Gustafsson, Volvo Powertrain, Sweden
Jonathan Jacqmot, Stephane Caro, Free Field Technologies, Belgium

550 Let there be sound: virtual prototyping of GA-transducers.
Gerard Hegemans, COMSOL BV, Netherlands

553 Prediction of noise transmission through anisotropic multilayered aircraft fuselage, using finite element models including porous, elastic and fluid domains
Martin Östberg, KTH Royal Institute of Technology, Sweden
Peter Göransson, KTH Aeronatical & Vehicle Engineering, Sweden

562 Sound Transmission Analysis Using the Hybrid Finite Element - Wave Based Approach for Coupled Vibroacoustic Problems
Takashi Takahashi, Japan Aerospace Exploration Agency, Japan
Hideaki Kaneda, Research Center of Computational Mechanics, Inc, Japan
Takashi Aoyama, Japan Aerospace Exploration Agency, Japan
Bert Pluymers, Wim Desmet, K.U.Leuven, Belgium

573 Modeling acoustic diffuse fields: updated sampling procedure and spatial correlation function eliminating grazing incidences
Jean-Pierre Coyette, Benoit Van den Nieuwenhof, Gregory Lielens, Free Field Technologies S.A., Belgium

613 Numerical evaluation and experimental validation of noise emitted by typical civil aircrafts
Gennaro Scarselli, University of Salento, Italy

652 Microstructure - acoustic properties relationships: Application to membrane and bimodal pore-size distribution effects
Camille Perrot, Minh Tan Hoang, Guy Bonnet, Université Paris-Est, France
Fabien Chevillotte, Fabien Chevillotte, France
François-Xavier Bécot, Luc Jaouen, Matelys - Acoustique & Vibrations, France
Laurent Gautron, Rosanna Combes, Université Paris-Est, France
Arnaud Duval, Jean-François Rondeau, Faurecia Acoustics and Soft Trim Division, France

668 Vibro-acoustic design of the stage floor reconstruction of a concert hall
Fülöp Augusztinovicz, Tibor Kimpián, Budapest University of Technology and Economics, Hungary

675 Structural effects in double porosity materials: analytical modeling and numerical validation
François-Xavier Bécot, Matelys - Acoustique & Vibrations, France
Olivier Dazel, Université du Maine, France
Luc Jaouen, Matelys - Acoustique & Vibrations, France

Wind turbine vibrations

236 User defined ‘level-of-detail’ approach to modelling complex spring/mass/damper systems
Paul Wastie, John Hems, Aegis Rubber Engineering Ltd, United Kingdom
Cristinel Mares, Brunel University, United Kingdom
Ernie Cutts, Aegis Rubber Engineering Ltd, United Kingdom
Ibrahim Esat, Brunel University, United Kingdom

504 Reproduction of dynamic load cases on a 13.2 MW test facility for wind turbine gearboxes
Filip De Coninck, K.U.Leuven, Belgium
Joris Peeters, Rob Huijskens, Dirk Leimann, Hansen Transmissions, Belgium
Paul Sas, Wim Desmet, K.U.Leuven, Belgium

609 Modelling and Vibration Analysis of Wind Turbines
Simon Frazer, Brunel University, United Kingdom
Paul Wastie, John Hems, Aegis Rubber Engineering Ltd, United Kingdom
Ibrahim Esat, Cristinel Mares, Brunel University, United Kingdom

627 Full-scale multibody modeling of a wind turbine based on experimental data
Simone Manzato, Bart Peeters, Alessandro Toso, LMS International, Belgium
Richard Osgood, Gunjit Bir, Heena Mutha, NREL, United States